* [RFC PATCH 0/9] Add support for Allwinner R40 SoC
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
This patchset is an experiment to add R40 support to mainline Linux.
As we have still no user manual for R40, the patchset is developed
by reading the BSP source code and device tree, educated guess and
try and error.
Note: the PATCH 1~3 and 7 is not RFC (I want them to be merged now),
but they are sent together as they have functional dependency by
RFC patches.
Icenowy Zheng (9):
arm: sunxi: add support for R40 SoC
pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40
pinctrl: sunxi: add support for R40 pinctrl
clk: sunxi-ng: support R40 SoC
ARM: dts: sun8i: add DTSI file for R40 SoC
ARM: dts: sun8i: add DTS file for Banana Pi M2 Ultra
phy: sun4i-usb: add support for R40 USB PHY
ARM: dts: sun8i: add USB nodes for R40
ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra
Documentation/arm/sunxi/README | 4 +
.../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 184 ++++
arch/arm/boot/dts/sun8i-r40.dtsi | 493 +++++++++
arch/arm/mach-sunxi/sunxi.c | 1 +
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1140 ++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 68 ++
drivers/phy/phy-sun4i-usb.c | 17 +-
drivers/pinctrl/sunxi/Kconfig | 2 +-
drivers/pinctrl/sunxi/Makefile | 2 +-
...pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} | 69 +-
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 2 +
include/dt-bindings/clock/sun8i-r40-ccu.h | 189 ++++
include/dt-bindings/reset/sun8i-r40-ccu.h | 128 +++
17 files changed, 2286 insertions(+), 26 deletions(-)
create mode 100644 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
create mode 100644 arch/arm/boot/dts/sun8i-r40.dtsi
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
rename drivers/pinctrl/sunxi/{pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} (95%)
create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
--
2.11.1
^ permalink raw reply [flat|nested] 51+ messages in thread
* [RFC PATCH 0/9] Add support for Allwinner R40 SoC
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
This patchset is an experiment to add R40 support to mainline Linux.
As we have still no user manual for R40, the patchset is developed
by reading the BSP source code and device tree, educated guess and
try and error.
Note: the PATCH 1~3 and 7 is not RFC (I want them to be merged now),
but they are sent together as they have functional dependency by
RFC patches.
Icenowy Zheng (9):
arm: sunxi: add support for R40 SoC
pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40
pinctrl: sunxi: add support for R40 pinctrl
clk: sunxi-ng: support R40 SoC
ARM: dts: sun8i: add DTSI file for R40 SoC
ARM: dts: sun8i: add DTS file for Banana Pi M2 Ultra
phy: sun4i-usb: add support for R40 USB PHY
ARM: dts: sun8i: add USB nodes for R40
ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra
Documentation/arm/sunxi/README | 4 +
.../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 184 ++++
arch/arm/boot/dts/sun8i-r40.dtsi | 493 +++++++++
arch/arm/mach-sunxi/sunxi.c | 1 +
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1140 ++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 68 ++
drivers/phy/phy-sun4i-usb.c | 17 +-
drivers/pinctrl/sunxi/Kconfig | 2 +-
drivers/pinctrl/sunxi/Makefile | 2 +-
...pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} | 69 +-
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 2 +
include/dt-bindings/clock/sun8i-r40-ccu.h | 189 ++++
include/dt-bindings/reset/sun8i-r40-ccu.h | 128 +++
17 files changed, 2286 insertions(+), 26 deletions(-)
create mode 100644 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
create mode 100644 arch/arm/boot/dts/sun8i-r40.dtsi
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
rename drivers/pinctrl/sunxi/{pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} (95%)
create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 51+ messages in thread
* [RFC PATCH 0/9] Add support for Allwinner R40 SoC
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
This patchset is an experiment to add R40 support to mainline Linux.
As we have still no user manual for R40, the patchset is developed
by reading the BSP source code and device tree, educated guess and
try and error.
Note: the PATCH 1~3 and 7 is not RFC (I want them to be merged now),
but they are sent together as they have functional dependency by
RFC patches.
Icenowy Zheng (9):
arm: sunxi: add support for R40 SoC
pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40
pinctrl: sunxi: add support for R40 pinctrl
clk: sunxi-ng: support R40 SoC
ARM: dts: sun8i: add DTSI file for R40 SoC
ARM: dts: sun8i: add DTS file for Banana Pi M2 Ultra
phy: sun4i-usb: add support for R40 USB PHY
ARM: dts: sun8i: add USB nodes for R40
ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra
Documentation/arm/sunxi/README | 4 +
.../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 184 ++++
arch/arm/boot/dts/sun8i-r40.dtsi | 493 +++++++++
arch/arm/mach-sunxi/sunxi.c | 1 +
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1140 ++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 68 ++
drivers/phy/phy-sun4i-usb.c | 17 +-
drivers/pinctrl/sunxi/Kconfig | 2 +-
drivers/pinctrl/sunxi/Makefile | 2 +-
...pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} | 69 +-
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 2 +
include/dt-bindings/clock/sun8i-r40-ccu.h | 189 ++++
include/dt-bindings/reset/sun8i-r40-ccu.h | 128 +++
17 files changed, 2286 insertions(+), 26 deletions(-)
create mode 100644 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
create mode 100644 arch/arm/boot/dts/sun8i-r40.dtsi
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
rename drivers/pinctrl/sunxi/{pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} (95%)
create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
--
2.11.1
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 1/9] arm: sunxi: add support for R40 SoC
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 17:37 ` Icenowy Zheng
-1 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
Allwinner R40 is a new SoC, with Quad Core Cortex-A7 and peripherals
like A20.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
Documentation/arm/sunxi/README | 4 ++++
arch/arm/mach-sunxi/sunxi.c | 1 +
2 files changed, 5 insertions(+)
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index d7b1f016bd62..25c814adcd47 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -75,6 +75,10 @@ SunXi family
+ Datasheet
http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+ - Allwinner R40 (sun8i)
+ + Datasheet Draft
+ http://linux-sunxi.org/File:Allwinner_R40_Datasheet_V0.1.pdf
+
* Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
- Allwinner A80
+ Datasheet
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index f44e3acb5c90..aea616759451 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -66,6 +66,7 @@ static const char * const sun8i_board_dt_compat[] = {
"allwinner,sun8i-h2-plus",
"allwinner,sun8i-h3",
"allwinner,sun8i-v3s",
+ "allwinner,sun8i-r40",
NULL,
};
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 1/9] arm: sunxi: add support for R40 SoC
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
Allwinner R40 is a new SoC, with Quad Core Cortex-A7 and peripherals
like A20.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
Documentation/arm/sunxi/README | 4 ++++
arch/arm/mach-sunxi/sunxi.c | 1 +
2 files changed, 5 insertions(+)
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index d7b1f016bd62..25c814adcd47 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -75,6 +75,10 @@ SunXi family
+ Datasheet
http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+ - Allwinner R40 (sun8i)
+ + Datasheet Draft
+ http://linux-sunxi.org/File:Allwinner_R40_Datasheet_V0.1.pdf
+
* Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
- Allwinner A80
+ Datasheet
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index f44e3acb5c90..aea616759451 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -66,6 +66,7 @@ static const char * const sun8i_board_dt_compat[] = {
"allwinner,sun8i-h2-plus",
"allwinner,sun8i-h3",
"allwinner,sun8i-v3s",
+ "allwinner,sun8i-r40",
NULL,
};
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 1/9] arm: sunxi: add support for R40 SoC
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
Allwinner R40 is a new SoC, with Quad Core Cortex-A7 and peripherals
like A20.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
Documentation/arm/sunxi/README | 4 ++++
arch/arm/mach-sunxi/sunxi.c | 1 +
2 files changed, 5 insertions(+)
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index d7b1f016bd62..25c814adcd47 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -75,6 +75,10 @@ SunXi family
+ Datasheet
http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+ - Allwinner R40 (sun8i)
+ + Datasheet Draft
+ http://linux-sunxi.org/File:Allwinner_R40_Datasheet_V0.1.pdf
+
* Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
- Allwinner A80
+ Datasheet
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index f44e3acb5c90..aea616759451 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -66,6 +66,7 @@ static const char * const sun8i_board_dt_compat[] = {
"allwinner,sun8i-h2-plus",
"allwinner,sun8i-h3",
"allwinner,sun8i-v3s",
+ "allwinner,sun8i-r40",
NULL,
};
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 2/9] pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 17:37 ` Icenowy Zheng
-1 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
The new R40 SoC come with a largely similar version of the pin
controller in A20.
Rename the driver, in order to extend it with R40 support.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
drivers/pinctrl/sunxi/Kconfig | 2 +-
drivers/pinctrl/sunxi/Makefile | 2 +-
drivers/pinctrl/sunxi/{pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename drivers/pinctrl/sunxi/{pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} (100%)
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index 92d845827577..6552cfd5c057 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -26,7 +26,7 @@ config PINCTRL_SUN6I_A31_R
depends on RESET_CONTROLLER
select PINCTRL_SUNXI
-config PINCTRL_SUN7I_A20
+config PINCTRL_SUNXI_A20_R40
def_bool MACH_SUN7I
select PINCTRL_SUNXI
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index f9a3855c42f1..6ceab91c3834 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_PINCTRL_SUN5I) += pinctrl-sun5i.o
obj-$(CONFIG_PINCTRL_SUN6I_A31) += pinctrl-sun6i-a31.o
obj-$(CONFIG_PINCTRL_SUN6I_A31S) += pinctrl-sun6i-a31s.o
obj-$(CONFIG_PINCTRL_SUN6I_A31_R) += pinctrl-sun6i-a31-r.o
-obj-$(CONFIG_PINCTRL_SUN7I_A20) += pinctrl-sun7i-a20.o
+obj-$(CONFIG_PINCTRL_SUNXI_A20_R40) += pinctrl-sunxi-a20-r40.o
obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinctrl-sun8i-a23.o
obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
similarity index 100%
rename from drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
rename to drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 2/9] pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
The new R40 SoC come with a largely similar version of the pin
controller in A20.
Rename the driver, in order to extend it with R40 support.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
drivers/pinctrl/sunxi/Kconfig | 2 +-
drivers/pinctrl/sunxi/Makefile | 2 +-
drivers/pinctrl/sunxi/{pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename drivers/pinctrl/sunxi/{pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} (100%)
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index 92d845827577..6552cfd5c057 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -26,7 +26,7 @@ config PINCTRL_SUN6I_A31_R
depends on RESET_CONTROLLER
select PINCTRL_SUNXI
-config PINCTRL_SUN7I_A20
+config PINCTRL_SUNXI_A20_R40
def_bool MACH_SUN7I
select PINCTRL_SUNXI
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index f9a3855c42f1..6ceab91c3834 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_PINCTRL_SUN5I) += pinctrl-sun5i.o
obj-$(CONFIG_PINCTRL_SUN6I_A31) += pinctrl-sun6i-a31.o
obj-$(CONFIG_PINCTRL_SUN6I_A31S) += pinctrl-sun6i-a31s.o
obj-$(CONFIG_PINCTRL_SUN6I_A31_R) += pinctrl-sun6i-a31-r.o
-obj-$(CONFIG_PINCTRL_SUN7I_A20) += pinctrl-sun7i-a20.o
+obj-$(CONFIG_PINCTRL_SUNXI_A20_R40) += pinctrl-sunxi-a20-r40.o
obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinctrl-sun8i-a23.o
obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
similarity index 100%
rename from drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
rename to drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 2/9] pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
The new R40 SoC come with a largely similar version of the pin
controller in A20.
Rename the driver, in order to extend it with R40 support.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
drivers/pinctrl/sunxi/Kconfig | 2 +-
drivers/pinctrl/sunxi/Makefile | 2 +-
drivers/pinctrl/sunxi/{pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename drivers/pinctrl/sunxi/{pinctrl-sun7i-a20.c => pinctrl-sunxi-a20-r40.c} (100%)
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index 92d845827577..6552cfd5c057 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -26,7 +26,7 @@ config PINCTRL_SUN6I_A31_R
depends on RESET_CONTROLLER
select PINCTRL_SUNXI
-config PINCTRL_SUN7I_A20
+config PINCTRL_SUNXI_A20_R40
def_bool MACH_SUN7I
select PINCTRL_SUNXI
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index f9a3855c42f1..6ceab91c3834 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_PINCTRL_SUN5I) += pinctrl-sun5i.o
obj-$(CONFIG_PINCTRL_SUN6I_A31) += pinctrl-sun6i-a31.o
obj-$(CONFIG_PINCTRL_SUN6I_A31S) += pinctrl-sun6i-a31s.o
obj-$(CONFIG_PINCTRL_SUN6I_A31_R) += pinctrl-sun6i-a31-r.o
-obj-$(CONFIG_PINCTRL_SUN7I_A20) += pinctrl-sun7i-a20.o
+obj-$(CONFIG_PINCTRL_SUNXI_A20_R40) += pinctrl-sunxi-a20-r40.o
obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinctrl-sun8i-a23.o
obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
similarity index 100%
rename from drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
rename to drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 3/9] pinctrl: sunxi: add support for R40 pinctrl
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 17:37 ` Icenowy Zheng
-1 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
Allwinner R40 have a pin controller similar to A20, only added 8-bit
eMMC function to mmc2 at PC bank.
Add support for it in the already renamed sunxi-a20-r40 driver via
variant framework.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c | 161 ++++++++++++++++++++------
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 2 +
2 files changed, 125 insertions(+), 38 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c b/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
index b6f4c68ffb39..a925e6b835bc 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
@@ -18,7 +18,7 @@
#include "pinctrl-sunxi.h"
-static const struct sunxi_desc_pin sun7i_a20_pins[] = {
+static const struct sunxi_desc_pin sunxi_a20_r40_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -146,7 +146,10 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "i2c0")), /* SCK */
+ SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "pll-lock-dbg",
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 1),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -154,11 +157,21 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "pwm")), /* PWM0 */
+ SUNXI_FUNCTION_VARIANT(0x2,
+ "pwm", /* PWM0 */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "pwm", /* PWM0 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "ir0"), /* TX */
+ SUNXI_FUNCTION_VARIANT(0x2,
+ "ir0", /* TX */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "pwm", /* PWM1 */
+ PINCTRL_SUN8I_R40),
SUNXI_FUNCTION(0x4, "spdif")), /* MCLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4),
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -187,11 +200,17 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 9),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "i2s0")), /* DO1 */
+ SUNXI_FUNCTION(0x2, "i2s0"), /* DO1 */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "pwm", /* PWM6 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 10),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "i2s0")), /* DO2 */
+ SUNXI_FUNCTION(0x2, "i2s0"), /* DO2 */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "pwm", /* PWM7 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -201,12 +220,16 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "i2s0"), /* DI */
SUNXI_FUNCTION(0x3, "ac97"), /* DI */
- SUNXI_FUNCTION(0x4, "spdif")), /* DI */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "spdif", /* DI */
+ PINCTRL_SUN7I_A20)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi2"), /* CS1 */
- SUNXI_FUNCTION(0x4, "spdif")), /* DO */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "spdif", /* DO */
+ PINCTRL_SUN7I_A20)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -247,7 +270,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "uart0"), /* TX */
- SUNXI_FUNCTION(0x3, "ir1")), /* TX */
+ SUNXI_FUNCTION_VARIANT(0x2,
+ "ir1", /* TX */
+ PINCTRL_SUN7I_A20)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 23),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -280,7 +305,10 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 5),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NRE# */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NRE# */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* DS */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 6),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -314,19 +342,31 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ4 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ4 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D4 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ5 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ5 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D5 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ6 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ6 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D6 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ7 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ7 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D7 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -366,7 +406,10 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 24),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQS */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQS */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* RST */
+ PINCTRL_SUN8I_R40)),
/* Hole */
SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -667,14 +710,20 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "ts1"), /* D5 */
SUNXI_FUNCTION(0x3, "csi1"), /* D5 */
SUNXI_FUNCTION(0x4, "uart3"), /* CTS */
- SUNXI_FUNCTION(0x5, "csi0")), /* D13 */
+ SUNXI_FUNCTION(0x5, "csi0"), /* D13 */
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "bist", /* RESULT0 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "ts1"), /* D6 */
SUNXI_FUNCTION(0x3, "csi1"), /* D6 */
SUNXI_FUNCTION(0x4, "uart4"), /* TX */
- SUNXI_FUNCTION(0x5, "csi0")), /* D14 */
+ SUNXI_FUNCTION(0x5, "csi0"), /* D14 */
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "bist", /* RESULT1 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -730,7 +779,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "lcd1"), /* D6 */
SUNXI_FUNCTION(0x4, "uart5"), /* TX */
- SUNXI_FUNCTION(0x5, "ms"), /* BS */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* BS */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 6), /* EINT6 */
SUNXI_FUNCTION(0x7, "csi1")), /* D6 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 7),
@@ -738,7 +789,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "lcd1"), /* D7 */
SUNXI_FUNCTION(0x4, "uart5"), /* RX */
- SUNXI_FUNCTION(0x5, "ms"), /* CLK */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* CLK */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 7), /* EINT7 */
SUNXI_FUNCTION(0x7, "csi1")), /* D7 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 8),
@@ -747,7 +800,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D8 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD3 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN0 */
- SUNXI_FUNCTION(0x5, "ms"), /* D0 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D0 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 8), /* EINT8 */
SUNXI_FUNCTION(0x7, "csi1")), /* D8 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 9),
@@ -756,7 +811,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D9 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD2 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN1 */
- SUNXI_FUNCTION(0x5, "ms"), /* D1 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D1 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 9), /* EINT9 */
SUNXI_FUNCTION(0x7, "csi1")), /* D9 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 10),
@@ -765,7 +822,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D10 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD1 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN2 */
- SUNXI_FUNCTION(0x5, "ms"), /* D2 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D2 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 10), /* EINT10 */
SUNXI_FUNCTION(0x7, "csi1")), /* D10 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 11),
@@ -774,7 +833,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D11 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD0 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN3 */
- SUNXI_FUNCTION(0x5, "ms"), /* D3 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D3 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 11), /* EINT11 */
SUNXI_FUNCTION(0x7, "csi1")), /* D11 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 12),
@@ -816,6 +877,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D16 */
SUNXI_FUNCTION(0x3, "emac"), /* ETXD2 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN6 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "sim", /* DET */
+ PINCTRL_SUN8I_R40),
SUNXI_FUNCTION_IRQ(0x6, 16), /* EINT16 */
SUNXI_FUNCTION(0x7, "csi1")), /* D16 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 17),
@@ -1020,37 +1084,58 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "ps2"), /* SCK0 */
SUNXI_FUNCTION(0x3, "uart7"), /* TX */
- SUNXI_FUNCTION(0x4, "hdmi")), /* HSCL */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "hdmi", /* HSCL */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "pwm", /* PWM2 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 21),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "ps2"), /* SDA0 */
SUNXI_FUNCTION(0x3, "uart7"), /* RX */
- SUNXI_FUNCTION(0x4, "hdmi")), /* HSDA */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "hdmi", /* HSDA */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "pwm", /* PWM3 */
+ PINCTRL_SUN8I_R40)),
};
-static const struct sunxi_pinctrl_desc sun7i_a20_pinctrl_data = {
- .pins = sun7i_a20_pins,
- .npins = ARRAY_SIZE(sun7i_a20_pins),
+static const struct sunxi_pinctrl_desc sunxi_a20_r40_pinctrl_data = {
+ .pins = sunxi_a20_r40_pins,
+ .npins = ARRAY_SIZE(sunxi_a20_r40_pins),
.irq_banks = 1,
};
-static int sun7i_a20_pinctrl_probe(struct platform_device *pdev)
+static int sunxi_a20_r40_pinctrl_probe(struct platform_device *pdev)
{
- return sunxi_pinctrl_init(pdev,
- &sun7i_a20_pinctrl_data);
+ unsigned long variant =
+ (unsigned long)of_device_get_match_data(&pdev->dev);
+
+ return sunxi_pinctrl_init_with_variant(pdev,
+ &sunxi_a20_r40_pinctrl_data,
+ variant);
}
-static const struct of_device_id sun7i_a20_pinctrl_match[] = {
- { .compatible = "allwinner,sun7i-a20-pinctrl", },
+static const struct of_device_id sunxi_a20_r40_pinctrl_match[] = {
+ {
+ .compatible = "allwinner,sun7i-a20-pinctrl",
+ .data = (void *) PINCTRL_SUN7I_A20,
+ },
+ {
+ .compatible = "allwinner,sun8i-r40-pinctrl",
+ .data = (void *) PINCTRL_SUN8I_R40,
+ },
{}
};
-static struct platform_driver sun7i_a20_pinctrl_driver = {
- .probe = sun7i_a20_pinctrl_probe,
+static struct platform_driver sunxi_a20_r40_pinctrl_driver = {
+ .probe = sunxi_a20_r40_pinctrl_probe,
.driver = {
- .name = "sun7i-a20-pinctrl",
- .of_match_table = sun7i_a20_pinctrl_match,
+ .name = "sunxi-a20-r40-pinctrl",
+ .of_match_table = sunxi_a20_r40_pinctrl_match,
},
};
-builtin_platform_driver(sun7i_a20_pinctrl_driver);
+builtin_platform_driver(sunxi_a20_r40_pinctrl_driver);
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index 56be35387ccf..4d1afa29d744 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -85,6 +85,8 @@
#define PINCTRL_SUN5I_A10S BIT(1)
#define PINCTRL_SUN5I_A13 BIT(2)
#define PINCTRL_SUN5I_GR8 BIT(3)
+#define PINCTRL_SUN7I_A20 BIT(4)
+#define PINCTRL_SUN8I_R40 BIT(5)
struct sunxi_desc_function {
unsigned long variant;
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 3/9] pinctrl: sunxi: add support for R40 pinctrl
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
Allwinner R40 have a pin controller similar to A20, only added 8-bit
eMMC function to mmc2 at PC bank.
Add support for it in the already renamed sunxi-a20-r40 driver via
variant framework.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c | 161 ++++++++++++++++++++------
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 2 +
2 files changed, 125 insertions(+), 38 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c b/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
index b6f4c68ffb39..a925e6b835bc 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
@@ -18,7 +18,7 @@
#include "pinctrl-sunxi.h"
-static const struct sunxi_desc_pin sun7i_a20_pins[] = {
+static const struct sunxi_desc_pin sunxi_a20_r40_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -146,7 +146,10 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "i2c0")), /* SCK */
+ SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "pll-lock-dbg",
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 1),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -154,11 +157,21 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "pwm")), /* PWM0 */
+ SUNXI_FUNCTION_VARIANT(0x2,
+ "pwm", /* PWM0 */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "pwm", /* PWM0 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "ir0"), /* TX */
+ SUNXI_FUNCTION_VARIANT(0x2,
+ "ir0", /* TX */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "pwm", /* PWM1 */
+ PINCTRL_SUN8I_R40),
SUNXI_FUNCTION(0x4, "spdif")), /* MCLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4),
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -187,11 +200,17 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 9),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "i2s0")), /* DO1 */
+ SUNXI_FUNCTION(0x2, "i2s0"), /* DO1 */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "pwm", /* PWM6 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 10),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "i2s0")), /* DO2 */
+ SUNXI_FUNCTION(0x2, "i2s0"), /* DO2 */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "pwm", /* PWM7 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -201,12 +220,16 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "i2s0"), /* DI */
SUNXI_FUNCTION(0x3, "ac97"), /* DI */
- SUNXI_FUNCTION(0x4, "spdif")), /* DI */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "spdif", /* DI */
+ PINCTRL_SUN7I_A20)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi2"), /* CS1 */
- SUNXI_FUNCTION(0x4, "spdif")), /* DO */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "spdif", /* DO */
+ PINCTRL_SUN7I_A20)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -247,7 +270,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "uart0"), /* TX */
- SUNXI_FUNCTION(0x3, "ir1")), /* TX */
+ SUNXI_FUNCTION_VARIANT(0x2,
+ "ir1", /* TX */
+ PINCTRL_SUN7I_A20)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 23),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -280,7 +305,10 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 5),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NRE# */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NRE# */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* DS */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 6),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -314,19 +342,31 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ4 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ4 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D4 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ5 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ5 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D5 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ6 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ6 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D6 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ7 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ7 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D7 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -366,7 +406,10 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 24),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQS */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQS */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* RST */
+ PINCTRL_SUN8I_R40)),
/* Hole */
SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -667,14 +710,20 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "ts1"), /* D5 */
SUNXI_FUNCTION(0x3, "csi1"), /* D5 */
SUNXI_FUNCTION(0x4, "uart3"), /* CTS */
- SUNXI_FUNCTION(0x5, "csi0")), /* D13 */
+ SUNXI_FUNCTION(0x5, "csi0"), /* D13 */
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "bist", /* RESULT0 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "ts1"), /* D6 */
SUNXI_FUNCTION(0x3, "csi1"), /* D6 */
SUNXI_FUNCTION(0x4, "uart4"), /* TX */
- SUNXI_FUNCTION(0x5, "csi0")), /* D14 */
+ SUNXI_FUNCTION(0x5, "csi0"), /* D14 */
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "bist", /* RESULT1 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -730,7 +779,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "lcd1"), /* D6 */
SUNXI_FUNCTION(0x4, "uart5"), /* TX */
- SUNXI_FUNCTION(0x5, "ms"), /* BS */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* BS */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 6), /* EINT6 */
SUNXI_FUNCTION(0x7, "csi1")), /* D6 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 7),
@@ -738,7 +789,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "lcd1"), /* D7 */
SUNXI_FUNCTION(0x4, "uart5"), /* RX */
- SUNXI_FUNCTION(0x5, "ms"), /* CLK */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* CLK */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 7), /* EINT7 */
SUNXI_FUNCTION(0x7, "csi1")), /* D7 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 8),
@@ -747,7 +800,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D8 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD3 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN0 */
- SUNXI_FUNCTION(0x5, "ms"), /* D0 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D0 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 8), /* EINT8 */
SUNXI_FUNCTION(0x7, "csi1")), /* D8 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 9),
@@ -756,7 +811,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D9 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD2 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN1 */
- SUNXI_FUNCTION(0x5, "ms"), /* D1 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D1 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 9), /* EINT9 */
SUNXI_FUNCTION(0x7, "csi1")), /* D9 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 10),
@@ -765,7 +822,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D10 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD1 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN2 */
- SUNXI_FUNCTION(0x5, "ms"), /* D2 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D2 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 10), /* EINT10 */
SUNXI_FUNCTION(0x7, "csi1")), /* D10 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 11),
@@ -774,7 +833,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D11 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD0 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN3 */
- SUNXI_FUNCTION(0x5, "ms"), /* D3 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D3 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 11), /* EINT11 */
SUNXI_FUNCTION(0x7, "csi1")), /* D11 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 12),
@@ -816,6 +877,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D16 */
SUNXI_FUNCTION(0x3, "emac"), /* ETXD2 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN6 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "sim", /* DET */
+ PINCTRL_SUN8I_R40),
SUNXI_FUNCTION_IRQ(0x6, 16), /* EINT16 */
SUNXI_FUNCTION(0x7, "csi1")), /* D16 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 17),
@@ -1020,37 +1084,58 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "ps2"), /* SCK0 */
SUNXI_FUNCTION(0x3, "uart7"), /* TX */
- SUNXI_FUNCTION(0x4, "hdmi")), /* HSCL */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "hdmi", /* HSCL */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "pwm", /* PWM2 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 21),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "ps2"), /* SDA0 */
SUNXI_FUNCTION(0x3, "uart7"), /* RX */
- SUNXI_FUNCTION(0x4, "hdmi")), /* HSDA */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "hdmi", /* HSDA */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "pwm", /* PWM3 */
+ PINCTRL_SUN8I_R40)),
};
-static const struct sunxi_pinctrl_desc sun7i_a20_pinctrl_data = {
- .pins = sun7i_a20_pins,
- .npins = ARRAY_SIZE(sun7i_a20_pins),
+static const struct sunxi_pinctrl_desc sunxi_a20_r40_pinctrl_data = {
+ .pins = sunxi_a20_r40_pins,
+ .npins = ARRAY_SIZE(sunxi_a20_r40_pins),
.irq_banks = 1,
};
-static int sun7i_a20_pinctrl_probe(struct platform_device *pdev)
+static int sunxi_a20_r40_pinctrl_probe(struct platform_device *pdev)
{
- return sunxi_pinctrl_init(pdev,
- &sun7i_a20_pinctrl_data);
+ unsigned long variant =
+ (unsigned long)of_device_get_match_data(&pdev->dev);
+
+ return sunxi_pinctrl_init_with_variant(pdev,
+ &sunxi_a20_r40_pinctrl_data,
+ variant);
}
-static const struct of_device_id sun7i_a20_pinctrl_match[] = {
- { .compatible = "allwinner,sun7i-a20-pinctrl", },
+static const struct of_device_id sunxi_a20_r40_pinctrl_match[] = {
+ {
+ .compatible = "allwinner,sun7i-a20-pinctrl",
+ .data = (void *) PINCTRL_SUN7I_A20,
+ },
+ {
+ .compatible = "allwinner,sun8i-r40-pinctrl",
+ .data = (void *) PINCTRL_SUN8I_R40,
+ },
{}
};
-static struct platform_driver sun7i_a20_pinctrl_driver = {
- .probe = sun7i_a20_pinctrl_probe,
+static struct platform_driver sunxi_a20_r40_pinctrl_driver = {
+ .probe = sunxi_a20_r40_pinctrl_probe,
.driver = {
- .name = "sun7i-a20-pinctrl",
- .of_match_table = sun7i_a20_pinctrl_match,
+ .name = "sunxi-a20-r40-pinctrl",
+ .of_match_table = sunxi_a20_r40_pinctrl_match,
},
};
-builtin_platform_driver(sun7i_a20_pinctrl_driver);
+builtin_platform_driver(sunxi_a20_r40_pinctrl_driver);
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index 56be35387ccf..4d1afa29d744 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -85,6 +85,8 @@
#define PINCTRL_SUN5I_A10S BIT(1)
#define PINCTRL_SUN5I_A13 BIT(2)
#define PINCTRL_SUN5I_GR8 BIT(3)
+#define PINCTRL_SUN7I_A20 BIT(4)
+#define PINCTRL_SUN8I_R40 BIT(5)
struct sunxi_desc_function {
unsigned long variant;
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 3/9] pinctrl: sunxi: add support for R40 pinctrl
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
Allwinner R40 have a pin controller similar to A20, only added 8-bit
eMMC function to mmc2 at PC bank.
Add support for it in the already renamed sunxi-a20-r40 driver via
variant framework.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c | 161 ++++++++++++++++++++------
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 2 +
2 files changed, 125 insertions(+), 38 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c b/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
index b6f4c68ffb39..a925e6b835bc 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi-a20-r40.c
@@ -18,7 +18,7 @@
#include "pinctrl-sunxi.h"
-static const struct sunxi_desc_pin sun7i_a20_pins[] = {
+static const struct sunxi_desc_pin sunxi_a20_r40_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -146,7 +146,10 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "i2c0")), /* SCK */
+ SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "pll-lock-dbg",
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 1),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -154,11 +157,21 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "pwm")), /* PWM0 */
+ SUNXI_FUNCTION_VARIANT(0x2,
+ "pwm", /* PWM0 */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "pwm", /* PWM0 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "ir0"), /* TX */
+ SUNXI_FUNCTION_VARIANT(0x2,
+ "ir0", /* TX */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "pwm", /* PWM1 */
+ PINCTRL_SUN8I_R40),
SUNXI_FUNCTION(0x4, "spdif")), /* MCLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4),
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -187,11 +200,17 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 9),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "i2s0")), /* DO1 */
+ SUNXI_FUNCTION(0x2, "i2s0"), /* DO1 */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "pwm", /* PWM6 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 10),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "i2s0")), /* DO2 */
+ SUNXI_FUNCTION(0x2, "i2s0"), /* DO2 */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "pwm", /* PWM7 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -201,12 +220,16 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "i2s0"), /* DI */
SUNXI_FUNCTION(0x3, "ac97"), /* DI */
- SUNXI_FUNCTION(0x4, "spdif")), /* DI */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "spdif", /* DI */
+ PINCTRL_SUN7I_A20)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi2"), /* CS1 */
- SUNXI_FUNCTION(0x4, "spdif")), /* DO */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "spdif", /* DO */
+ PINCTRL_SUN7I_A20)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -247,7 +270,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "uart0"), /* TX */
- SUNXI_FUNCTION(0x3, "ir1")), /* TX */
+ SUNXI_FUNCTION_VARIANT(0x2,
+ "ir1", /* TX */
+ PINCTRL_SUN7I_A20)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 23),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -280,7 +305,10 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 5),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NRE# */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NRE# */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* DS */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 6),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -314,19 +342,31 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ4 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ4 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D4 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ5 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ5 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D5 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ6 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ6 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D6 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQ7 */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQ7 */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* D7 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -366,7 +406,10 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 24),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "nand0")), /* NDQS */
+ SUNXI_FUNCTION(0x2, "nand0"), /* NDQS */
+ SUNXI_FUNCTION_VARIANT(0x3,
+ "mmc2", /* RST */
+ PINCTRL_SUN8I_R40)),
/* Hole */
SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -667,14 +710,20 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "ts1"), /* D5 */
SUNXI_FUNCTION(0x3, "csi1"), /* D5 */
SUNXI_FUNCTION(0x4, "uart3"), /* CTS */
- SUNXI_FUNCTION(0x5, "csi0")), /* D13 */
+ SUNXI_FUNCTION(0x5, "csi0"), /* D13 */
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "bist", /* RESULT0 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "ts1"), /* D6 */
SUNXI_FUNCTION(0x3, "csi1"), /* D6 */
SUNXI_FUNCTION(0x4, "uart4"), /* TX */
- SUNXI_FUNCTION(0x5, "csi0")), /* D14 */
+ SUNXI_FUNCTION(0x5, "csi0"), /* D14 */
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "bist", /* RESULT1 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
@@ -730,7 +779,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "lcd1"), /* D6 */
SUNXI_FUNCTION(0x4, "uart5"), /* TX */
- SUNXI_FUNCTION(0x5, "ms"), /* BS */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* BS */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 6), /* EINT6 */
SUNXI_FUNCTION(0x7, "csi1")), /* D6 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 7),
@@ -738,7 +789,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "lcd1"), /* D7 */
SUNXI_FUNCTION(0x4, "uart5"), /* RX */
- SUNXI_FUNCTION(0x5, "ms"), /* CLK */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* CLK */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 7), /* EINT7 */
SUNXI_FUNCTION(0x7, "csi1")), /* D7 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 8),
@@ -747,7 +800,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D8 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD3 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN0 */
- SUNXI_FUNCTION(0x5, "ms"), /* D0 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D0 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 8), /* EINT8 */
SUNXI_FUNCTION(0x7, "csi1")), /* D8 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 9),
@@ -756,7 +811,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D9 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD2 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN1 */
- SUNXI_FUNCTION(0x5, "ms"), /* D1 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D1 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 9), /* EINT9 */
SUNXI_FUNCTION(0x7, "csi1")), /* D9 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 10),
@@ -765,7 +822,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D10 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD1 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN2 */
- SUNXI_FUNCTION(0x5, "ms"), /* D2 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D2 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 10), /* EINT10 */
SUNXI_FUNCTION(0x7, "csi1")), /* D10 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 11),
@@ -774,7 +833,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D11 */
SUNXI_FUNCTION(0x3, "emac"), /* ERXD0 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN3 */
- SUNXI_FUNCTION(0x5, "ms"), /* D3 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "ms", /* D3 */
+ PINCTRL_SUN7I_A20),
SUNXI_FUNCTION_IRQ(0x6, 11), /* EINT11 */
SUNXI_FUNCTION(0x7, "csi1")), /* D11 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 12),
@@ -816,6 +877,9 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D16 */
SUNXI_FUNCTION(0x3, "emac"), /* ETXD2 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN6 */
+ SUNXI_FUNCTION_VARIANT(0x5,
+ "sim", /* DET */
+ PINCTRL_SUN8I_R40),
SUNXI_FUNCTION_IRQ(0x6, 16), /* EINT16 */
SUNXI_FUNCTION(0x7, "csi1")), /* D16 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 17),
@@ -1020,37 +1084,58 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "ps2"), /* SCK0 */
SUNXI_FUNCTION(0x3, "uart7"), /* TX */
- SUNXI_FUNCTION(0x4, "hdmi")), /* HSCL */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "hdmi", /* HSCL */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "pwm", /* PWM2 */
+ PINCTRL_SUN8I_R40)),
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 21),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "ps2"), /* SDA0 */
SUNXI_FUNCTION(0x3, "uart7"), /* RX */
- SUNXI_FUNCTION(0x4, "hdmi")), /* HSDA */
+ SUNXI_FUNCTION_VARIANT(0x4,
+ "hdmi", /* HSDA */
+ PINCTRL_SUN7I_A20),
+ SUNXI_FUNCTION_VARIANT(0x6,
+ "pwm", /* PWM3 */
+ PINCTRL_SUN8I_R40)),
};
-static const struct sunxi_pinctrl_desc sun7i_a20_pinctrl_data = {
- .pins = sun7i_a20_pins,
- .npins = ARRAY_SIZE(sun7i_a20_pins),
+static const struct sunxi_pinctrl_desc sunxi_a20_r40_pinctrl_data = {
+ .pins = sunxi_a20_r40_pins,
+ .npins = ARRAY_SIZE(sunxi_a20_r40_pins),
.irq_banks = 1,
};
-static int sun7i_a20_pinctrl_probe(struct platform_device *pdev)
+static int sunxi_a20_r40_pinctrl_probe(struct platform_device *pdev)
{
- return sunxi_pinctrl_init(pdev,
- &sun7i_a20_pinctrl_data);
+ unsigned long variant =
+ (unsigned long)of_device_get_match_data(&pdev->dev);
+
+ return sunxi_pinctrl_init_with_variant(pdev,
+ &sunxi_a20_r40_pinctrl_data,
+ variant);
}
-static const struct of_device_id sun7i_a20_pinctrl_match[] = {
- { .compatible = "allwinner,sun7i-a20-pinctrl", },
+static const struct of_device_id sunxi_a20_r40_pinctrl_match[] = {
+ {
+ .compatible = "allwinner,sun7i-a20-pinctrl",
+ .data = (void *) PINCTRL_SUN7I_A20,
+ },
+ {
+ .compatible = "allwinner,sun8i-r40-pinctrl",
+ .data = (void *) PINCTRL_SUN8I_R40,
+ },
{}
};
-static struct platform_driver sun7i_a20_pinctrl_driver = {
- .probe = sun7i_a20_pinctrl_probe,
+static struct platform_driver sunxi_a20_r40_pinctrl_driver = {
+ .probe = sunxi_a20_r40_pinctrl_probe,
.driver = {
- .name = "sun7i-a20-pinctrl",
- .of_match_table = sun7i_a20_pinctrl_match,
+ .name = "sunxi-a20-r40-pinctrl",
+ .of_match_table = sunxi_a20_r40_pinctrl_match,
},
};
-builtin_platform_driver(sun7i_a20_pinctrl_driver);
+builtin_platform_driver(sunxi_a20_r40_pinctrl_driver);
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index 56be35387ccf..4d1afa29d744 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -85,6 +85,8 @@
#define PINCTRL_SUN5I_A10S BIT(1)
#define PINCTRL_SUN5I_A13 BIT(2)
#define PINCTRL_SUN5I_GR8 BIT(3)
+#define PINCTRL_SUN7I_A20 BIT(4)
+#define PINCTRL_SUN8I_R40 BIT(5)
struct sunxi_desc_function {
unsigned long variant;
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 4/9] clk: sunxi-ng: support R40 SoC
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 17:37 ` Icenowy Zheng
-1 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
Allwinner R40 SoC have a clock controller module in the style of the
SoCs beyond sun6i, however, it's more rich and complex.
Add support for it.
As the user manual is still not available, this driver is made with
knowledge from clk-sun8iw11.c in the BSP kernel source.
---
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1140 +++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 68 ++
include/dt-bindings/clock/sun8i-r40-ccu.h | 189 +++++
include/dt-bindings/reset/sun8i-r40-ccu.h | 128 ++++
6 files changed, 1536 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 695bbf9ef428..31d005051b6e 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -131,6 +131,16 @@ config SUN8I_V3S_CCU
select SUNXI_CCU_PHASE
default MACH_SUN8I
+config SUN8I_R40_CCU
+ bool "Support for the Allwinner R40 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NKMP
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ default MACH_SUN8I
+
config SUN9I_A80_CCU
bool "Support for the Allwinner A80 CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 6feaac0c5600..3a512b1adcf7 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
+obj-$(CONFIG_SUN8I_R40_CCU) += ccu-sun8i-r40.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
new file mode 100644
index 000000000000..150e086e9765
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
@@ -0,0 +1,1140 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-r40.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
+ "osc24M", 0x000,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ 16, 2, /* P */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_R40_PLL_AUDIO_REG 0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+ "osc24M", 0x008,
+ 8, 7, /* N */
+ 0, 5, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
+ "osc24M", 0x0010,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+ "osc24M", 0x0018,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
+ "osc24M", 0x020,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+/* According to the BSP driver, pll-periph{0,1} have M at 0:1 */
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph0_clk, "pll-periph0",
+ "osc24M", 0x028,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph1_clk, "pll-periph1",
+ "osc24M", 0x02c,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
+ "osc24M", 0x030,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+/*
+ * For the special bit in gate part, please see the BSP source code at
+ * https://github.com/BPI-SINOVOIP/BPI-M2U-bsp/blob/master/linux-sunxi/drivers/clk/sunxi/clk-sun8iw11.c#L665
+ */
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_sata_clk, "pll-sata",
+ "osc24M", 0x034,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31) | BIT(14), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+ "osc24M", 0x038,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static const char * const pll_mipi_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_NKM_WITH_MUX_GATE_LOCK(pll_mipi_clk, "pll-mipi",
+ pll_mipi_parents, 0x040,
+ 8, 4, /* N */
+ 4, 2, /* K */
+ 0, 4, /* M */
+ 21, 0, /* mux */
+ BIT(31) | BIT(23) | BIT(22), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+ "osc24M", 0x0048,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
+ "osc24M", 0x04c,
+ 8, 7, /* N */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+ "pll-cpu" , "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+ 0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+ "axi" , "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .mux = {
+ .shift = 12,
+ .width = 2,
+
+ .variable_prediv = {
+ .index = 3,
+ .shift = 6,
+ .width = 2,
+ },
+ },
+
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb1",
+ ahb1_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb1_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+ 0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+ "pll-periph0-2x" , "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_mmc3_clk, "bus-mmc3", "ahb1",
+ 0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
+ 0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb1",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb1",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_spi3_clk, "bus-spi3", "ahb1",
+ 0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_sata_clk, "bus-sata", "ahb1",
+ 0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
+ 0x060, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
+ 0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb1",
+ 0x060, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb1",
+ 0x060, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
+ 0x060, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb1",
+ 0x060, BIT(30), 0);
+static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb1",
+ 0x060, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_de_mp_clk, "bus-de-mp", "ahb1",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi0_clk, "bus-csi0", "ahb1",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_csi1_clk, "bus-csi1", "ahb1",
+ 0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_hdmi_slow_clk, "bus-hdmi-slow", "ahb1",
+ 0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_tve0_clk, "bus-tve0", "ahb1",
+ 0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_tve1_clk, "bus-tve1", "ahb1",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_tve_top_clk, "bus-tve-top", "ahb1",
+ 0x064, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_gmac_clk, "bus-gmac", "ahb1",
+ 0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
+ 0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_tvd0_clk, "bus-tvd0", "ahb1",
+ 0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_tvd1_clk, "bus-tvd1", "ahb1",
+ 0x064, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_tvd2_clk, "bus-tvd2", "ahb1",
+ 0x064, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_tvd3_clk, "bus-tvd3", "ahb1",
+ 0x064, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_tvd_top_clk, "bus-tvd-top", "ahb1",
+ 0x064, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
+ 0x064, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
+ 0x064, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_tve0_tcon_clk, "bus-tve0-tcon", "ahb1",
+ 0x064, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_tve1_tcon_clk, "bus-tve1-tcon", "ahb1",
+ 0x064, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb1",
+ 0x064, BIT(30), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ac97_clk, "bus-ac97", "apb1",
+ 0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ir0_clk, "bus-ir0", "apb1",
+ 0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ir1_clk, "bus-ir1", "apb1",
+ 0x068, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
+ 0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_keypad_clk, "bus-keypad", "apb1",
+ 0x068, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
+ 0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
+ 0x068, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
+ 0x068, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
+ 0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2",
+ 0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_can_clk, "bus-can", "apb2",
+ 0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
+ 0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ps20_clk, "bus-ps20", "apb2",
+ 0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ps21_clk, "bus-ps21", "apb2",
+ 0x06c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2",
+ 0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
+ 0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2",
+ 0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2",
+ 0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_uart6_clk, "bus-uart6", "apb2",
+ 0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_uart7_clk, "bus-uart7", "apb2",
+ 0x06c, BIT(23), 0);
+
+/* Educated guess: the BSP clock driver do not have this clock */
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
+ 0x070, BIT(7), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ths_clk, "ths", "osc24M",
+ 0x074, 0, 2, BIT(31), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0ac,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+ 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", i2s_parents,
+ 0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_parents,
+ 0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const keypad_parents[] = { "osc24M", "osc32k", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(keypad_clk, "keypad", keypad_parents, 0x0c4,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 25, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const sata_parents[] = { "pll-sata", "pll-periph0", };
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+ 0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
+ 0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
+ 0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M",
+ 0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
+ 0x0cc, BIT(16), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc24M",
+ 0x0cc, BIT(17), 0);
+static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc24M",
+ 0x0cc, BIT(18), 0);
+
+static const char * const usb_ohci12m_parents[] = { "osc24M-2x", "osc24M",
+ "osc32k" };
+static SUNXI_CCU_MUX(usb_ohci0_12m_clk, "usb-ohci0-12m", usb_ohci12m_parents,
+ 0x0cc, 20, 2, 0);
+static SUNXI_CCU_MUX(usb_ohci1_12m_clk, "usb-ohci1-12m", usb_ohci12m_parents,
+ 0x0cc, 22, 2, 0);
+static SUNXI_CCU_MUX(usb_ohci2_12m_clk, "usb-ohci2-12m", usb_ohci12m_parents,
+ 0x0cc, 24, 2, 0);
+
+static const char * const ir_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_clk, "ir0", ir_parents, 0x0d0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_clk, "ir1", ir_parents, 0x0d4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+ 0x0f4, 0, 2, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk, "dram-csi0", "dram",
+ 0x100, BIT(1), 0);
+/*
+ * TODO: Which is this? deinterlace or CSI1?
+ * In the BSP clock source code the two mod clocks both uses DRAM_GATE 2
+ */
+static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
+ 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
+ 0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "dram",
+ 0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_de_mp_clk, "dram-de-mp", "dram",
+ 0x100, BIT(5), 0);
+
+static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+ 0x104, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+ 0x108, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x",
+ "pll-mipi" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_clk, "tcon0", tcon_parents,
+ 0x110, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_clk, "tcon1", tcon_parents,
+ 0x114, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve0_clk, "tcon-tve0", tcon_parents,
+ 0x118, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve1_clk, "tcon-tve1", tcon_parents,
+ 0x11c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
+ 0x124, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk", csi_mclk_parents,
+ 0x130, 0, 5, 8, 3, BIT(15), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
+ 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
+ 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+ 0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(adda_clk, "adda", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(adda_4x_clk, "adda-4x", "pll-audio-4x",
+ 0x140, BIT(30), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
+ 0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M",
+ 0x154, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-ddr0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x15c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ CLK_IS_CRITICAL);
+
+static const char * const mipi_dsi_parents[] = { "pll-video0", "pll-video1",
+ "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi", mipi_dsi_parents,
+ 0x168, 0, 4, 8, 2, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tve0_clk, "tve0", tcon_parents,
+ 0x180, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tve1_clk, "tve1", tcon_parents,
+ 0x184, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tvd_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd0_clk, "tvd0", tvd_parents,
+ 0x188, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd1_clk, "tvd1", tvd_parents,
+ 0x18c, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd2_clk, "tvd2", tvd_parents,
+ 0x190, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd3_clk, "tvd3", tvd_parents,
+ 0x194, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+ 0x1a0, 0, 3, BIT(31), 0);
+
+static const char * const out_parents[] = { "osc24M-32k", "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(outa_clk, "outa", out_parents, 0x1f0,
+ 8, 5, /* M */
+ 20, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_MP_WITH_MUX_GATE(outb_clk, "outb", out_parents, 0x1f4,
+ 8, 5, /* M */
+ 20, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static struct ccu_common *sun8i_r40_ccu_clks[] = {
+ &pll_cpu_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_periph0_clk.common,
+ &pll_periph1_clk.common,
+ &pll_video1_clk.common,
+ &pll_sata_clk.common,
+ &pll_gpu_clk.common,
+ &pll_mipi_clk.common,
+ &pll_de_clk.common,
+ &pll_ddr1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb1_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &bus_mipi_dsi_clk.common,
+ &bus_ce_clk.common,
+ &bus_dma_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_mmc3_clk.common,
+ &bus_nand_clk.common,
+ &bus_dram_clk.common,
+ &bus_emac_clk.common,
+ &bus_ts_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &bus_spi2_clk.common,
+ &bus_spi3_clk.common,
+ &bus_sata_clk.common,
+ &bus_otg_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_ehci1_clk.common,
+ &bus_ehci2_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ohci1_clk.common,
+ &bus_ohci2_clk.common,
+ &bus_ve_clk.common,
+ &bus_de_mp_clk.common,
+ &bus_deinterlace_clk.common,
+ &bus_csi0_clk.common,
+ &bus_csi1_clk.common,
+ &bus_hdmi_slow_clk.common,
+ &bus_hdmi_clk.common,
+ &bus_de_clk.common,
+ &bus_tve0_clk.common,
+ &bus_tve1_clk.common,
+ &bus_tve_top_clk.common,
+ &bus_gmac_clk.common,
+ &bus_gpu_clk.common,
+ &bus_tvd0_clk.common,
+ &bus_tvd1_clk.common,
+ &bus_tvd2_clk.common,
+ &bus_tvd3_clk.common,
+ &bus_tvd_top_clk.common,
+ &bus_tcon0_clk.common,
+ &bus_tcon1_clk.common,
+ &bus_tve0_tcon_clk.common,
+ &bus_tve1_tcon_clk.common,
+ &bus_tcon_top_clk.common,
+ &bus_codec_clk.common,
+ &bus_spdif_clk.common,
+ &bus_ac97_clk.common,
+ &bus_pio_clk.common,
+ &bus_ir0_clk.common,
+ &bus_ir1_clk.common,
+ &bus_ths_clk.common,
+ &bus_keypad_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2s1_clk.common,
+ &bus_i2s2_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_i2c3_clk.common,
+ &bus_can_clk.common,
+ &bus_scr_clk.common,
+ &bus_ps20_clk.common,
+ &bus_ps21_clk.common,
+ &bus_i2c4_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_uart3_clk.common,
+ &bus_uart4_clk.common,
+ &bus_uart5_clk.common,
+ &bus_uart6_clk.common,
+ &bus_uart7_clk.common,
+ &bus_dbg_clk.common,
+ &ths_clk.common,
+ &nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &mmc3_clk.common,
+ &ts_clk.common,
+ &ce_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &spi3_clk.common,
+ &i2s0_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &ac97_clk.common,
+ &spdif_clk.common,
+ &keypad_clk.common,
+ &sata_clk.common,
+ &usb_phy0_clk.common,
+ &usb_phy1_clk.common,
+ &usb_phy2_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_ohci2_clk.common,
+ &usb_ohci0_12m_clk.common,
+ &usb_ohci1_12m_clk.common,
+ &usb_ohci2_12m_clk.common,
+ &ir0_clk.common,
+ &ir1_clk.common,
+ &dram_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi0_clk.common,
+ &dram_deinterlace_clk.common,
+ &dram_ts_clk.common,
+ &dram_tvd_clk.common,
+ &dram_de_mp_clk.common,
+ &de_clk.common,
+ &de_mp_clk.common,
+ &tcon0_clk.common,
+ &tcon1_clk.common,
+ &tcon_tve0_clk.common,
+ &tcon_tve1_clk.common,
+ &deinterlace_clk.common,
+ &csi1_mclk_clk.common,
+ &csi_sclk_clk.common,
+ &csi0_mclk_clk.common,
+ &ve_clk.common,
+ &adda_clk.common,
+ &adda_4x_clk.common,
+ &avs_clk.common,
+ &hdmi_clk.common,
+ &hdmi_slow_clk.common,
+ &mbus_clk.common,
+ &mipi_dsi_clk.common,
+ &tve0_clk.common,
+ &tve1_clk.common,
+ &tvd0_clk.common,
+ &tvd1_clk.common,
+ &tvd2_clk.common,
+ &tvd3_clk.common,
+ &gpu_clk.common,
+ &outa_clk.common,
+ &outb_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+ "pll-periph0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
+ "pll-periph1", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, 0);
+static CLK_FIXED_FACTOR(osc24m_2x_clk, "osc24M-2x",
+ "osc24M", 1, 2, 0);
+static CLK_FIXED_FACTOR(osc24m_32k_clk, "osc24M-32k",
+ "osc24M", 750, 1, 0);
+
+static struct clk_hw_onecell_data sun8i_r40_hw_clks = {
+ .hws = {
+ [CLK_OSC24M_2X] = &osc24m_2x_clk.hw,
+ [CLK_OSC24M_32K] = &osc24m_32k_clk.hw,
+ [CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_PLL_SATA] = &pll_sata_clk.common.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
+ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_MMC3] = &bus_mmc3_clk.common.hw,
+ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
+ [CLK_BUS_SPI3] = &bus_spi3_clk.common.hw,
+ [CLK_BUS_SATA] = &bus_sata_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
+ [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
+ [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_DE_MP] = &bus_de_mp_clk.common.hw,
+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
+ [CLK_BUS_CSI0] = &bus_csi0_clk.common.hw,
+ [CLK_BUS_CSI1] = &bus_csi1_clk.common.hw,
+ [CLK_BUS_HDMI_SLOW] = &bus_hdmi_slow_clk.common.hw,
+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_TVE0] = &bus_tve0_clk.common.hw,
+ [CLK_BUS_TVE1] = &bus_tve1_clk.common.hw,
+ [CLK_BUS_TVE_TOP] = &bus_tve_top_clk.common.hw,
+ [CLK_BUS_GMAC] = &bus_gmac_clk.common.hw,
+ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
+ [CLK_BUS_TVD0] = &bus_tvd0_clk.common.hw,
+ [CLK_BUS_TVD1] = &bus_tvd1_clk.common.hw,
+ [CLK_BUS_TVD2] = &bus_tvd2_clk.common.hw,
+ [CLK_BUS_TVD3] = &bus_tvd3_clk.common.hw,
+ [CLK_BUS_TVD_TOP] = &bus_tvd_top_clk.common.hw,
+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
+ [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
+ [CLK_BUS_TVE0_TCON] = &bus_tve0_tcon_clk.common.hw,
+ [CLK_BUS_TVE1_TCON] = &bus_tve1_tcon_clk.common.hw,
+ [CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_BUS_AC97] = &bus_ac97_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_IR0] = &bus_ir0_clk.common.hw,
+ [CLK_BUS_IR1] = &bus_ir1_clk.common.hw,
+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
+ [CLK_BUS_KEYPAD] = &bus_keypad_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
+ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
+ [CLK_BUS_CAN] = &bus_can_clk.common.hw,
+ [CLK_BUS_SCR] = &bus_scr_clk.common.hw,
+ [CLK_BUS_PS20] = &bus_ps20_clk.common.hw,
+ [CLK_BUS_PS21] = &bus_ps21_clk.common.hw,
+ [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
+ [CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
+ [CLK_BUS_UART6] = &bus_uart6_clk.common.hw,
+ [CLK_BUS_UART7] = &bus_uart7_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_THS] = &ths_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
+ [CLK_USB_OHCI0_12M] = &usb_ohci0_12m_clk.common.hw,
+ [CLK_USB_OHCI1_12M] = &usb_ohci1_12m_clk.common.hw,
+ [CLK_USB_OHCI2_12M] = &usb_ohci2_12m_clk.common.hw,
+ [CLK_IR0] = &ir0_clk.common.hw,
+ [CLK_IR1] = &ir1_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_DE_MP] = &dram_de_mp_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0] = &tcon0_clk.common.hw,
+ [CLK_TCON1] = &tcon1_clk.common.hw,
+ [CLK_TCON_TVE0] = &tcon_tve0_clk.common.hw,
+ [CLK_TCON_TVE1] = &tcon_tve1_clk.common.hw,
+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
+ [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_ADDA] = &adda_clk.common.hw,
+ [CLK_ADDA_4X] = &adda_4x_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_MIPI_DSI] = &mipi_dsi_clk.common.hw,
+ [CLK_TVE0] = &tve0_clk.common.hw,
+ [CLK_TVE1] = &tve1_clk.common.hw,
+ [CLK_TVD0] = &tvd0_clk.common.hw,
+ [CLK_TVD1] = &tvd1_clk.common.hw,
+ [CLK_TVD2] = &tvd2_clk.common.hw,
+ [CLK_TVD3] = &tvd3_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ [CLK_OUTA] = &outa_clk.common.hw,
+ [CLK_OUTB] = &outb_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_r40_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+
+ [RST_MBUS] = { 0x0fc, BIT(31) },
+
+ [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
+ [RST_BUS_CE] = { 0x2c0, BIT(5) },
+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
+ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
+ [RST_BUS_MMC3] = { 0x2c0, BIT(11) },
+ [RST_BUS_NAND] = { 0x2c0, BIT(13) },
+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
+ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
+ [RST_BUS_TS] = { 0x2c0, BIT(18) },
+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
+ [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
+ [RST_BUS_SPI2] = { 0x2c0, BIT(22) },
+ [RST_BUS_SPI3] = { 0x2c0, BIT(23) },
+ [RST_BUS_SATA] = { 0x2c0, BIT(24) },
+ [RST_BUS_OTG] = { 0x2c0, BIT(25) },
+ [RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
+ [RST_BUS_EHCI1] = { 0x2c0, BIT(27) },
+ [RST_BUS_EHCI2] = { 0x2c0, BIT(28) },
+ [RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
+ [RST_BUS_OHCI1] = { 0x2c0, BIT(30) },
+ [RST_BUS_OHCI2] = { 0x2c0, BIT(31) },
+
+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
+ [RST_BUS_DE_MP] = { 0x2c4, BIT(2) },
+ [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
+ [RST_BUS_CSI0] = { 0x2c4, BIT(8) },
+ [RST_BUS_CSI1] = { 0x2c4, BIT(9) },
+ [RST_BUS_HDMI_SLOW] = { 0x2c4, BIT(10) },
+ [RST_BUS_HDMI] = { 0x2c4, BIT(11) },
+ [RST_BUS_DE] = { 0x2c4, BIT(12) },
+ [RST_BUS_TVE0] = { 0x2c4, BIT(13) },
+ [RST_BUS_TVE1] = { 0x2c4, BIT(14) },
+ [RST_BUS_TVE_TOP] = { 0x2c4, BIT(15) },
+ [RST_BUS_GMAC] = { 0x2c4, BIT(17) },
+ [RST_BUS_GPU] = { 0x2c4, BIT(20) },
+ [RST_BUS_TVD0] = { 0x2c4, BIT(21) },
+ [RST_BUS_TVD1] = { 0x2c4, BIT(22) },
+ [RST_BUS_TVD2] = { 0x2c4, BIT(23) },
+ [RST_BUS_TVD3] = { 0x2c4, BIT(24) },
+ [RST_BUS_TVD_TOP] = { 0x2c4, BIT(25) },
+ [RST_BUS_TCON0] = { 0x2c4, BIT(26) },
+ [RST_BUS_TCON1] = { 0x2c4, BIT(27) },
+ [RST_BUS_TCON_TVE0] = { 0x2c4, BIT(28) },
+ [RST_BUS_TCON_TVE1] = { 0x2c4, BIT(29) },
+ [RST_BUS_TCON_TOP] = { 0x2c4, BIT(30) },
+ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
+
+ [RST_BUS_LVDS] = { 0x2c8, BIT(0) },
+
+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
+ [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
+ [RST_BUS_AC97] = { 0x2d0, BIT(2) },
+ [RST_BUS_IR0] = { 0x2d0, BIT(6) },
+ [RST_BUS_IR1] = { 0x2d0, BIT(7) },
+ [RST_BUS_THS] = { 0x2d0, BIT(8) },
+ [RST_BUS_KEYPAD] = { 0x2d0, BIT(10) },
+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
+ [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
+ [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
+
+ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
+ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
+ [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
+ [RST_BUS_I2C3] = { 0x2d8, BIT(3) },
+ [RST_BUS_CAN] = { 0x2d8, BIT(4) },
+ [RST_BUS_SCR] = { 0x2d8, BIT(5) },
+ [RST_BUS_PS20] = { 0x2d8, BIT(6) },
+ [RST_BUS_PS21] = { 0x2d8, BIT(7) },
+ [RST_BUS_I2C4] = { 0x2d8, BIT(15) },
+ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
+ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
+ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
+ [RST_BUS_UART3] = { 0x2d8, BIT(19) },
+ [RST_BUS_UART4] = { 0x2d8, BIT(20) },
+ [RST_BUS_UART5] = { 0x2d8, BIT(21) },
+ [RST_BUS_UART6] = { 0x2d8, BIT(22) },
+ [RST_BUS_UART7] = { 0x2d8, BIT(23) },
+};
+
+static const struct sunxi_ccu_desc sun8i_r40_ccu_desc = {
+ .ccu_clks = sun8i_r40_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun8i_r40_ccu_clks),
+
+ .hw_clks = &sun8i_r40_hw_clks,
+
+ .resets = sun8i_r40_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun8i_r40_ccu_resets),
+};
+
+static struct ccu_mux_nb sun8i_r40_cpu_nb = {
+ .common = &cpu_clk.common,
+ .cm = &cpu_clk.mux,
+ .delay_us = 1, /* > 8 clock cycles at 24 MHz */
+ .bypass_index = 1, /* index of 24 MHz oscillator */
+};
+
+static void __init sun8i_r40_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN8I_R40_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN8I_R40_PLL_AUDIO_REG);
+
+ sunxi_ccu_probe(node, reg, &sun8i_r40_ccu_desc);
+
+ ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
+ &sun8i_r40_cpu_nb);
+}
+CLK_OF_DECLARE(sun8i_r40_ccu, "allwinner,sun8i-r40-ccu",
+ sun8i_r40_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.h b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
new file mode 100644
index 000000000000..109b8f55754e
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_R40_H_
+#define _CCU_SUN8I_R40_H_
+
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+#define CLK_OSC24M_2X 0
+#define CLK_OSC24M_32K 1
+#define CLK_PLL_CPU 2
+#define CLK_PLL_AUDIO_BASE 3
+#define CLK_PLL_AUDIO 4
+#define CLK_PLL_AUDIO_2X 5
+#define CLK_PLL_AUDIO_4X 6
+#define CLK_PLL_AUDIO_8X 7
+#define CLK_PLL_VIDEO0 8
+#define CLK_PLL_VIDEO0_2X 9
+#define CLK_PLL_VE 10
+#define CLK_PLL_DDR0 11
+#define CLK_PLL_PERIPH0 12
+#define CLK_PLL_PERIPH0_2X 13
+#define CLK_PLL_PERIPH1 14
+#define CLK_PLL_PERIPH1_2X 15
+#define CLK_PLL_VIDEO1 16
+#define CLK_PLL_VIDEO1_2X 17
+#define CLK_PLL_SATA 18
+#define CLK_PLL_GPU 19
+#define CLK_PLL_MIPI 20
+#define CLK_PLL_DE 21
+#define CLK_PLL_DDR1 22
+
+/* The CPU clock is exported */
+
+#define CLK_AXI 24
+#define CLK_AHB1 25
+#define CLK_APB1 26
+#define CLK_APB2 27
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM 133
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS 156
+
+/* Another bunch of module clocks are exported */
+
+#define CLK_NUMBER (CLK_OUTB + 1)
+
+#endif /* _CCU_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..b11eb7e614a5
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-r40-ccu.h
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_
+#define _DT_BINDINGS_CLK_SUN8I_R40_H_
+
+#define CLK_CPU 23
+
+#define CLK_BUS_MIPI_DSI 28
+#define CLK_BUS_CE 29
+#define CLK_BUS_DMA 30
+#define CLK_BUS_MMC0 31
+#define CLK_BUS_MMC1 32
+#define CLK_BUS_MMC2 33
+#define CLK_BUS_MMC3 34
+#define CLK_BUS_NAND 35
+#define CLK_BUS_DRAM 36
+#define CLK_BUS_EMAC 37
+#define CLK_BUS_TS 38
+#define CLK_BUS_SPI0 39
+#define CLK_BUS_SPI1 40
+#define CLK_BUS_SPI2 41
+#define CLK_BUS_SPI3 42
+#define CLK_BUS_SATA 43
+#define CLK_BUS_OTG 44
+#define CLK_BUS_EHCI0 45
+#define CLK_BUS_EHCI1 46
+#define CLK_BUS_EHCI2 47
+#define CLK_BUS_OHCI0 48
+#define CLK_BUS_OHCI1 49
+#define CLK_BUS_OHCI2 50
+#define CLK_BUS_VE 51
+#define CLK_BUS_DE_MP 52
+#define CLK_BUS_DEINTERLACE 53
+#define CLK_BUS_CSI0 54
+#define CLK_BUS_CSI1 55
+#define CLK_BUS_HDMI_SLOW 56
+#define CLK_BUS_HDMI 57
+#define CLK_BUS_DE 58
+#define CLK_BUS_TVE0 59
+#define CLK_BUS_TVE1 60
+#define CLK_BUS_TVE_TOP 61
+#define CLK_BUS_GMAC 62
+#define CLK_BUS_GPU 63
+#define CLK_BUS_TVD0 64
+#define CLK_BUS_TVD1 65
+#define CLK_BUS_TVD2 66
+#define CLK_BUS_TVD3 67
+#define CLK_BUS_TVD_TOP 68
+#define CLK_BUS_TCON0 69
+#define CLK_BUS_TCON1 70
+#define CLK_BUS_TVE0_TCON 71
+#define CLK_BUS_TVE1_TCON 72
+#define CLK_BUS_TCON_TOP 73
+#define CLK_BUS_CODEC 74
+#define CLK_BUS_SPDIF 75
+#define CLK_BUS_AC97 76
+#define CLK_BUS_PIO 77
+#define CLK_BUS_IR0 78
+#define CLK_BUS_IR1 79
+#define CLK_BUS_THS 80
+#define CLK_BUS_KEYPAD 81
+#define CLK_BUS_I2S0 82
+#define CLK_BUS_I2S1 83
+#define CLK_BUS_I2S2 84
+#define CLK_BUS_I2C0 85
+#define CLK_BUS_I2C1 86
+#define CLK_BUS_I2C2 87
+#define CLK_BUS_I2C3 88
+#define CLK_BUS_CAN 89
+#define CLK_BUS_SCR 90
+#define CLK_BUS_PS20 91
+#define CLK_BUS_PS21 92
+#define CLK_BUS_I2C4 93
+#define CLK_BUS_UART0 94
+#define CLK_BUS_UART1 95
+#define CLK_BUS_UART2 96
+#define CLK_BUS_UART3 97
+#define CLK_BUS_UART4 98
+#define CLK_BUS_UART5 99
+#define CLK_BUS_UART6 100
+#define CLK_BUS_UART7 101
+#define CLK_BUS_DBG 102
+
+#define CLK_THS 103
+#define CLK_NAND 104
+#define CLK_MMC0 105
+#define CLK_MMC1 106
+#define CLK_MMC2 107
+#define CLK_MMC3 108
+#define CLK_TS 109
+#define CLK_CE 110
+#define CLK_SPI0 111
+#define CLK_SPI1 112
+#define CLK_SPI2 113
+#define CLK_SPI3 114
+#define CLK_I2S0 115
+#define CLK_I2S1 116
+#define CLK_I2S2 117
+#define CLK_AC97 118
+#define CLK_SPDIF 119
+#define CLK_KEYPAD 120
+#define CLK_SATA 121
+#define CLK_USB_PHY0 122
+#define CLK_USB_PHY1 123
+#define CLK_USB_PHY2 124
+#define CLK_USB_OHCI0 125
+#define CLK_USB_OHCI1 126
+#define CLK_USB_OHCI2 127
+#define CLK_USB_OHCI0_12M 128
+#define CLK_USB_OHCI1_12M 129
+#define CLK_USB_OHCI2_12M 130
+#define CLK_IR0 131
+#define CLK_IR1 132
+
+#define CLK_DRAM_VE 134
+#define CLK_DRAM_CSI0 135
+#define CLK_DRAM_DEINTERLACE 136
+#define CLK_DRAM_TS 137
+#define CLK_DRAM_TVD 138
+#define CLK_DRAM_DE_MP 139
+#define CLK_DE 140
+#define CLK_DE_MP 141
+#define CLK_TCON0 142
+#define CLK_TCON1 143
+#define CLK_TCON_TVE0 144
+#define CLK_TCON_TVE1 145
+#define CLK_DEINTERLACE 146
+#define CLK_CSI1_MCLK 147
+#define CLK_CSI_SCLK 148
+#define CLK_CSI0_MCLK 149
+#define CLK_VE 150
+#define CLK_ADDA 151
+#define CLK_ADDA_4X 152
+#define CLK_AVS 153
+#define CLK_HDMI 154
+#define CLK_HDMI_SLOW 155
+
+#define CLK_MIPI_DSI 157
+#define CLK_TVE0 158
+#define CLK_TVE1 159
+#define CLK_TVD0 160
+#define CLK_TVD1 161
+#define CLK_TVD2 162
+#define CLK_TVD3 163
+#define CLK_GPU 164
+#define CLK_OUTA 165
+#define CLK_OUTB 166
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/reset/sun8i-r40-ccu.h b/include/dt-bindings/reset/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..690839cd49bc
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-r40-ccu.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_R40_H_
+#define _DT_BINDINGS_RST_SUN8I_R40_H_
+
+#define RST_USB_PHY0 0
+#define RST_USB_PHY1 1
+#define RST_USB_PHY2 2
+
+#define RST_MBUS 3
+
+#define RST_BUS_MIPI_DSI 4
+#define RST_BUS_CE 5
+#define RST_BUS_DMA 6
+#define RST_BUS_MMC0 7
+#define RST_BUS_MMC1 8
+#define RST_BUS_MMC2 9
+#define RST_BUS_MMC3 10
+#define RST_BUS_NAND 11
+#define RST_BUS_DRAM 12
+#define RST_BUS_EMAC 13
+#define RST_BUS_TS 14
+#define RST_BUS_SPI0 15
+#define RST_BUS_SPI1 16
+#define RST_BUS_SPI2 17
+#define RST_BUS_SPI3 18
+#define RST_BUS_SATA 19
+#define RST_BUS_OTG 20
+#define RST_BUS_EHCI0 21
+#define RST_BUS_EHCI1 22
+#define RST_BUS_EHCI2 23
+#define RST_BUS_OHCI0 24
+#define RST_BUS_OHCI1 25
+#define RST_BUS_OHCI2 26
+#define RST_BUS_VE 27
+#define RST_BUS_DE_MP 28
+#define RST_BUS_DEINTERLACE 29
+#define RST_BUS_CSI0 30
+#define RST_BUS_CSI1 31
+#define RST_BUS_HDMI_SLOW 32
+#define RST_BUS_HDMI 33
+#define RST_BUS_DE 34
+#define RST_BUS_TVE0 35
+#define RST_BUS_TVE1 36
+#define RST_BUS_TVE_TOP 37
+#define RST_BUS_GMAC 38
+#define RST_BUS_GPU 39
+#define RST_BUS_TVD0 40
+#define RST_BUS_TVD1 41
+#define RST_BUS_TVD2 42
+#define RST_BUS_TVD3 43
+#define RST_BUS_TVD_TOP 44
+#define RST_BUS_TCON0 45
+#define RST_BUS_TCON1 46
+#define RST_BUS_TCON_TVE0 47
+#define RST_BUS_TCON_TVE1 48
+#define RST_BUS_TCON_TOP 49
+#define RST_BUS_DBG 50
+#define RST_BUS_LVDS 51
+#define RST_BUS_CODEC 52
+#define RST_BUS_SPDIF 53
+#define RST_BUS_AC97 54
+#define RST_BUS_IR0 55
+#define RST_BUS_IR1 56
+#define RST_BUS_THS 57
+#define RST_BUS_KEYPAD 58
+#define RST_BUS_I2S0 59
+#define RST_BUS_I2S1 60
+#define RST_BUS_I2S2 61
+#define RST_BUS_I2C0 62
+#define RST_BUS_I2C1 63
+#define RST_BUS_I2C2 64
+#define RST_BUS_I2C3 65
+#define RST_BUS_CAN 66
+#define RST_BUS_SCR 67
+#define RST_BUS_PS20 68
+#define RST_BUS_PS21 69
+#define RST_BUS_I2C4 70
+#define RST_BUS_UART0 71
+#define RST_BUS_UART1 72
+#define RST_BUS_UART2 73
+#define RST_BUS_UART3 74
+#define RST_BUS_UART4 75
+#define RST_BUS_UART5 76
+#define RST_BUS_UART6 77
+#define RST_BUS_UART7 78
+
+#endif /* _DT_BINDINGS_RST_SUN8I_R40_H_ */
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 4/9] clk: sunxi-ng: support R40 SoC
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
Allwinner R40 SoC have a clock controller module in the style of the
SoCs beyond sun6i, however, it's more rich and complex.
Add support for it.
As the user manual is still not available, this driver is made with
knowledge from clk-sun8iw11.c in the BSP kernel source.
---
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1140 +++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 68 ++
include/dt-bindings/clock/sun8i-r40-ccu.h | 189 +++++
include/dt-bindings/reset/sun8i-r40-ccu.h | 128 ++++
6 files changed, 1536 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 695bbf9ef428..31d005051b6e 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -131,6 +131,16 @@ config SUN8I_V3S_CCU
select SUNXI_CCU_PHASE
default MACH_SUN8I
+config SUN8I_R40_CCU
+ bool "Support for the Allwinner R40 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NKMP
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ default MACH_SUN8I
+
config SUN9I_A80_CCU
bool "Support for the Allwinner A80 CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 6feaac0c5600..3a512b1adcf7 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
+obj-$(CONFIG_SUN8I_R40_CCU) += ccu-sun8i-r40.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
new file mode 100644
index 000000000000..150e086e9765
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
@@ -0,0 +1,1140 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-r40.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
+ "osc24M", 0x000,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ 16, 2, /* P */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_R40_PLL_AUDIO_REG 0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+ "osc24M", 0x008,
+ 8, 7, /* N */
+ 0, 5, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
+ "osc24M", 0x0010,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+ "osc24M", 0x0018,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
+ "osc24M", 0x020,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+/* According to the BSP driver, pll-periph{0,1} have M at 0:1 */
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph0_clk, "pll-periph0",
+ "osc24M", 0x028,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph1_clk, "pll-periph1",
+ "osc24M", 0x02c,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
+ "osc24M", 0x030,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+/*
+ * For the special bit in gate part, please see the BSP source code at
+ * https://github.com/BPI-SINOVOIP/BPI-M2U-bsp/blob/master/linux-sunxi/drivers/clk/sunxi/clk-sun8iw11.c#L665
+ */
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_sata_clk, "pll-sata",
+ "osc24M", 0x034,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31) | BIT(14), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+ "osc24M", 0x038,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static const char * const pll_mipi_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_NKM_WITH_MUX_GATE_LOCK(pll_mipi_clk, "pll-mipi",
+ pll_mipi_parents, 0x040,
+ 8, 4, /* N */
+ 4, 2, /* K */
+ 0, 4, /* M */
+ 21, 0, /* mux */
+ BIT(31) | BIT(23) | BIT(22), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+ "osc24M", 0x0048,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
+ "osc24M", 0x04c,
+ 8, 7, /* N */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+ "pll-cpu" , "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+ 0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+ "axi" , "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .mux = {
+ .shift = 12,
+ .width = 2,
+
+ .variable_prediv = {
+ .index = 3,
+ .shift = 6,
+ .width = 2,
+ },
+ },
+
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb1",
+ ahb1_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb1_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+ 0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+ "pll-periph0-2x" , "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_mmc3_clk, "bus-mmc3", "ahb1",
+ 0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
+ 0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb1",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb1",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_spi3_clk, "bus-spi3", "ahb1",
+ 0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_sata_clk, "bus-sata", "ahb1",
+ 0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
+ 0x060, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
+ 0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb1",
+ 0x060, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb1",
+ 0x060, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
+ 0x060, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb1",
+ 0x060, BIT(30), 0);
+static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb1",
+ 0x060, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_de_mp_clk, "bus-de-mp", "ahb1",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi0_clk, "bus-csi0", "ahb1",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_csi1_clk, "bus-csi1", "ahb1",
+ 0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_hdmi_slow_clk, "bus-hdmi-slow", "ahb1",
+ 0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_tve0_clk, "bus-tve0", "ahb1",
+ 0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_tve1_clk, "bus-tve1", "ahb1",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_tve_top_clk, "bus-tve-top", "ahb1",
+ 0x064, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_gmac_clk, "bus-gmac", "ahb1",
+ 0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
+ 0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_tvd0_clk, "bus-tvd0", "ahb1",
+ 0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_tvd1_clk, "bus-tvd1", "ahb1",
+ 0x064, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_tvd2_clk, "bus-tvd2", "ahb1",
+ 0x064, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_tvd3_clk, "bus-tvd3", "ahb1",
+ 0x064, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_tvd_top_clk, "bus-tvd-top", "ahb1",
+ 0x064, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
+ 0x064, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
+ 0x064, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_tve0_tcon_clk, "bus-tve0-tcon", "ahb1",
+ 0x064, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_tve1_tcon_clk, "bus-tve1-tcon", "ahb1",
+ 0x064, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb1",
+ 0x064, BIT(30), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ac97_clk, "bus-ac97", "apb1",
+ 0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ir0_clk, "bus-ir0", "apb1",
+ 0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ir1_clk, "bus-ir1", "apb1",
+ 0x068, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
+ 0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_keypad_clk, "bus-keypad", "apb1",
+ 0x068, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
+ 0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
+ 0x068, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
+ 0x068, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
+ 0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2",
+ 0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_can_clk, "bus-can", "apb2",
+ 0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
+ 0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ps20_clk, "bus-ps20", "apb2",
+ 0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ps21_clk, "bus-ps21", "apb2",
+ 0x06c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2",
+ 0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
+ 0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2",
+ 0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2",
+ 0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_uart6_clk, "bus-uart6", "apb2",
+ 0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_uart7_clk, "bus-uart7", "apb2",
+ 0x06c, BIT(23), 0);
+
+/* Educated guess: the BSP clock driver do not have this clock */
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
+ 0x070, BIT(7), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ths_clk, "ths", "osc24M",
+ 0x074, 0, 2, BIT(31), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0ac,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+ 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", i2s_parents,
+ 0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_parents,
+ 0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const keypad_parents[] = { "osc24M", "osc32k", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(keypad_clk, "keypad", keypad_parents, 0x0c4,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 25, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const sata_parents[] = { "pll-sata", "pll-periph0", };
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+ 0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
+ 0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
+ 0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M",
+ 0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
+ 0x0cc, BIT(16), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc24M",
+ 0x0cc, BIT(17), 0);
+static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc24M",
+ 0x0cc, BIT(18), 0);
+
+static const char * const usb_ohci12m_parents[] = { "osc24M-2x", "osc24M",
+ "osc32k" };
+static SUNXI_CCU_MUX(usb_ohci0_12m_clk, "usb-ohci0-12m", usb_ohci12m_parents,
+ 0x0cc, 20, 2, 0);
+static SUNXI_CCU_MUX(usb_ohci1_12m_clk, "usb-ohci1-12m", usb_ohci12m_parents,
+ 0x0cc, 22, 2, 0);
+static SUNXI_CCU_MUX(usb_ohci2_12m_clk, "usb-ohci2-12m", usb_ohci12m_parents,
+ 0x0cc, 24, 2, 0);
+
+static const char * const ir_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_clk, "ir0", ir_parents, 0x0d0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_clk, "ir1", ir_parents, 0x0d4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+ 0x0f4, 0, 2, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk, "dram-csi0", "dram",
+ 0x100, BIT(1), 0);
+/*
+ * TODO: Which is this? deinterlace or CSI1?
+ * In the BSP clock source code the two mod clocks both uses DRAM_GATE 2
+ */
+static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
+ 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
+ 0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "dram",
+ 0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_de_mp_clk, "dram-de-mp", "dram",
+ 0x100, BIT(5), 0);
+
+static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+ 0x104, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+ 0x108, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x",
+ "pll-mipi" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_clk, "tcon0", tcon_parents,
+ 0x110, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_clk, "tcon1", tcon_parents,
+ 0x114, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve0_clk, "tcon-tve0", tcon_parents,
+ 0x118, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve1_clk, "tcon-tve1", tcon_parents,
+ 0x11c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
+ 0x124, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk", csi_mclk_parents,
+ 0x130, 0, 5, 8, 3, BIT(15), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
+ 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
+ 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+ 0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(adda_clk, "adda", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(adda_4x_clk, "adda-4x", "pll-audio-4x",
+ 0x140, BIT(30), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
+ 0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M",
+ 0x154, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-ddr0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x15c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ CLK_IS_CRITICAL);
+
+static const char * const mipi_dsi_parents[] = { "pll-video0", "pll-video1",
+ "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi", mipi_dsi_parents,
+ 0x168, 0, 4, 8, 2, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tve0_clk, "tve0", tcon_parents,
+ 0x180, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tve1_clk, "tve1", tcon_parents,
+ 0x184, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tvd_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd0_clk, "tvd0", tvd_parents,
+ 0x188, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd1_clk, "tvd1", tvd_parents,
+ 0x18c, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd2_clk, "tvd2", tvd_parents,
+ 0x190, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd3_clk, "tvd3", tvd_parents,
+ 0x194, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+ 0x1a0, 0, 3, BIT(31), 0);
+
+static const char * const out_parents[] = { "osc24M-32k", "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(outa_clk, "outa", out_parents, 0x1f0,
+ 8, 5, /* M */
+ 20, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_MP_WITH_MUX_GATE(outb_clk, "outb", out_parents, 0x1f4,
+ 8, 5, /* M */
+ 20, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static struct ccu_common *sun8i_r40_ccu_clks[] = {
+ &pll_cpu_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_periph0_clk.common,
+ &pll_periph1_clk.common,
+ &pll_video1_clk.common,
+ &pll_sata_clk.common,
+ &pll_gpu_clk.common,
+ &pll_mipi_clk.common,
+ &pll_de_clk.common,
+ &pll_ddr1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb1_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &bus_mipi_dsi_clk.common,
+ &bus_ce_clk.common,
+ &bus_dma_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_mmc3_clk.common,
+ &bus_nand_clk.common,
+ &bus_dram_clk.common,
+ &bus_emac_clk.common,
+ &bus_ts_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &bus_spi2_clk.common,
+ &bus_spi3_clk.common,
+ &bus_sata_clk.common,
+ &bus_otg_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_ehci1_clk.common,
+ &bus_ehci2_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ohci1_clk.common,
+ &bus_ohci2_clk.common,
+ &bus_ve_clk.common,
+ &bus_de_mp_clk.common,
+ &bus_deinterlace_clk.common,
+ &bus_csi0_clk.common,
+ &bus_csi1_clk.common,
+ &bus_hdmi_slow_clk.common,
+ &bus_hdmi_clk.common,
+ &bus_de_clk.common,
+ &bus_tve0_clk.common,
+ &bus_tve1_clk.common,
+ &bus_tve_top_clk.common,
+ &bus_gmac_clk.common,
+ &bus_gpu_clk.common,
+ &bus_tvd0_clk.common,
+ &bus_tvd1_clk.common,
+ &bus_tvd2_clk.common,
+ &bus_tvd3_clk.common,
+ &bus_tvd_top_clk.common,
+ &bus_tcon0_clk.common,
+ &bus_tcon1_clk.common,
+ &bus_tve0_tcon_clk.common,
+ &bus_tve1_tcon_clk.common,
+ &bus_tcon_top_clk.common,
+ &bus_codec_clk.common,
+ &bus_spdif_clk.common,
+ &bus_ac97_clk.common,
+ &bus_pio_clk.common,
+ &bus_ir0_clk.common,
+ &bus_ir1_clk.common,
+ &bus_ths_clk.common,
+ &bus_keypad_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2s1_clk.common,
+ &bus_i2s2_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_i2c3_clk.common,
+ &bus_can_clk.common,
+ &bus_scr_clk.common,
+ &bus_ps20_clk.common,
+ &bus_ps21_clk.common,
+ &bus_i2c4_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_uart3_clk.common,
+ &bus_uart4_clk.common,
+ &bus_uart5_clk.common,
+ &bus_uart6_clk.common,
+ &bus_uart7_clk.common,
+ &bus_dbg_clk.common,
+ &ths_clk.common,
+ &nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &mmc3_clk.common,
+ &ts_clk.common,
+ &ce_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &spi3_clk.common,
+ &i2s0_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &ac97_clk.common,
+ &spdif_clk.common,
+ &keypad_clk.common,
+ &sata_clk.common,
+ &usb_phy0_clk.common,
+ &usb_phy1_clk.common,
+ &usb_phy2_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_ohci2_clk.common,
+ &usb_ohci0_12m_clk.common,
+ &usb_ohci1_12m_clk.common,
+ &usb_ohci2_12m_clk.common,
+ &ir0_clk.common,
+ &ir1_clk.common,
+ &dram_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi0_clk.common,
+ &dram_deinterlace_clk.common,
+ &dram_ts_clk.common,
+ &dram_tvd_clk.common,
+ &dram_de_mp_clk.common,
+ &de_clk.common,
+ &de_mp_clk.common,
+ &tcon0_clk.common,
+ &tcon1_clk.common,
+ &tcon_tve0_clk.common,
+ &tcon_tve1_clk.common,
+ &deinterlace_clk.common,
+ &csi1_mclk_clk.common,
+ &csi_sclk_clk.common,
+ &csi0_mclk_clk.common,
+ &ve_clk.common,
+ &adda_clk.common,
+ &adda_4x_clk.common,
+ &avs_clk.common,
+ &hdmi_clk.common,
+ &hdmi_slow_clk.common,
+ &mbus_clk.common,
+ &mipi_dsi_clk.common,
+ &tve0_clk.common,
+ &tve1_clk.common,
+ &tvd0_clk.common,
+ &tvd1_clk.common,
+ &tvd2_clk.common,
+ &tvd3_clk.common,
+ &gpu_clk.common,
+ &outa_clk.common,
+ &outb_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+ "pll-periph0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
+ "pll-periph1", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, 0);
+static CLK_FIXED_FACTOR(osc24m_2x_clk, "osc24M-2x",
+ "osc24M", 1, 2, 0);
+static CLK_FIXED_FACTOR(osc24m_32k_clk, "osc24M-32k",
+ "osc24M", 750, 1, 0);
+
+static struct clk_hw_onecell_data sun8i_r40_hw_clks = {
+ .hws = {
+ [CLK_OSC24M_2X] = &osc24m_2x_clk.hw,
+ [CLK_OSC24M_32K] = &osc24m_32k_clk.hw,
+ [CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_PLL_SATA] = &pll_sata_clk.common.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
+ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_MMC3] = &bus_mmc3_clk.common.hw,
+ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
+ [CLK_BUS_SPI3] = &bus_spi3_clk.common.hw,
+ [CLK_BUS_SATA] = &bus_sata_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
+ [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
+ [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_DE_MP] = &bus_de_mp_clk.common.hw,
+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
+ [CLK_BUS_CSI0] = &bus_csi0_clk.common.hw,
+ [CLK_BUS_CSI1] = &bus_csi1_clk.common.hw,
+ [CLK_BUS_HDMI_SLOW] = &bus_hdmi_slow_clk.common.hw,
+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_TVE0] = &bus_tve0_clk.common.hw,
+ [CLK_BUS_TVE1] = &bus_tve1_clk.common.hw,
+ [CLK_BUS_TVE_TOP] = &bus_tve_top_clk.common.hw,
+ [CLK_BUS_GMAC] = &bus_gmac_clk.common.hw,
+ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
+ [CLK_BUS_TVD0] = &bus_tvd0_clk.common.hw,
+ [CLK_BUS_TVD1] = &bus_tvd1_clk.common.hw,
+ [CLK_BUS_TVD2] = &bus_tvd2_clk.common.hw,
+ [CLK_BUS_TVD3] = &bus_tvd3_clk.common.hw,
+ [CLK_BUS_TVD_TOP] = &bus_tvd_top_clk.common.hw,
+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
+ [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
+ [CLK_BUS_TVE0_TCON] = &bus_tve0_tcon_clk.common.hw,
+ [CLK_BUS_TVE1_TCON] = &bus_tve1_tcon_clk.common.hw,
+ [CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_BUS_AC97] = &bus_ac97_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_IR0] = &bus_ir0_clk.common.hw,
+ [CLK_BUS_IR1] = &bus_ir1_clk.common.hw,
+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
+ [CLK_BUS_KEYPAD] = &bus_keypad_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
+ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
+ [CLK_BUS_CAN] = &bus_can_clk.common.hw,
+ [CLK_BUS_SCR] = &bus_scr_clk.common.hw,
+ [CLK_BUS_PS20] = &bus_ps20_clk.common.hw,
+ [CLK_BUS_PS21] = &bus_ps21_clk.common.hw,
+ [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
+ [CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
+ [CLK_BUS_UART6] = &bus_uart6_clk.common.hw,
+ [CLK_BUS_UART7] = &bus_uart7_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_THS] = &ths_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
+ [CLK_USB_OHCI0_12M] = &usb_ohci0_12m_clk.common.hw,
+ [CLK_USB_OHCI1_12M] = &usb_ohci1_12m_clk.common.hw,
+ [CLK_USB_OHCI2_12M] = &usb_ohci2_12m_clk.common.hw,
+ [CLK_IR0] = &ir0_clk.common.hw,
+ [CLK_IR1] = &ir1_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_DE_MP] = &dram_de_mp_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0] = &tcon0_clk.common.hw,
+ [CLK_TCON1] = &tcon1_clk.common.hw,
+ [CLK_TCON_TVE0] = &tcon_tve0_clk.common.hw,
+ [CLK_TCON_TVE1] = &tcon_tve1_clk.common.hw,
+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
+ [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_ADDA] = &adda_clk.common.hw,
+ [CLK_ADDA_4X] = &adda_4x_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_MIPI_DSI] = &mipi_dsi_clk.common.hw,
+ [CLK_TVE0] = &tve0_clk.common.hw,
+ [CLK_TVE1] = &tve1_clk.common.hw,
+ [CLK_TVD0] = &tvd0_clk.common.hw,
+ [CLK_TVD1] = &tvd1_clk.common.hw,
+ [CLK_TVD2] = &tvd2_clk.common.hw,
+ [CLK_TVD3] = &tvd3_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ [CLK_OUTA] = &outa_clk.common.hw,
+ [CLK_OUTB] = &outb_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_r40_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+
+ [RST_MBUS] = { 0x0fc, BIT(31) },
+
+ [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
+ [RST_BUS_CE] = { 0x2c0, BIT(5) },
+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
+ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
+ [RST_BUS_MMC3] = { 0x2c0, BIT(11) },
+ [RST_BUS_NAND] = { 0x2c0, BIT(13) },
+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
+ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
+ [RST_BUS_TS] = { 0x2c0, BIT(18) },
+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
+ [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
+ [RST_BUS_SPI2] = { 0x2c0, BIT(22) },
+ [RST_BUS_SPI3] = { 0x2c0, BIT(23) },
+ [RST_BUS_SATA] = { 0x2c0, BIT(24) },
+ [RST_BUS_OTG] = { 0x2c0, BIT(25) },
+ [RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
+ [RST_BUS_EHCI1] = { 0x2c0, BIT(27) },
+ [RST_BUS_EHCI2] = { 0x2c0, BIT(28) },
+ [RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
+ [RST_BUS_OHCI1] = { 0x2c0, BIT(30) },
+ [RST_BUS_OHCI2] = { 0x2c0, BIT(31) },
+
+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
+ [RST_BUS_DE_MP] = { 0x2c4, BIT(2) },
+ [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
+ [RST_BUS_CSI0] = { 0x2c4, BIT(8) },
+ [RST_BUS_CSI1] = { 0x2c4, BIT(9) },
+ [RST_BUS_HDMI_SLOW] = { 0x2c4, BIT(10) },
+ [RST_BUS_HDMI] = { 0x2c4, BIT(11) },
+ [RST_BUS_DE] = { 0x2c4, BIT(12) },
+ [RST_BUS_TVE0] = { 0x2c4, BIT(13) },
+ [RST_BUS_TVE1] = { 0x2c4, BIT(14) },
+ [RST_BUS_TVE_TOP] = { 0x2c4, BIT(15) },
+ [RST_BUS_GMAC] = { 0x2c4, BIT(17) },
+ [RST_BUS_GPU] = { 0x2c4, BIT(20) },
+ [RST_BUS_TVD0] = { 0x2c4, BIT(21) },
+ [RST_BUS_TVD1] = { 0x2c4, BIT(22) },
+ [RST_BUS_TVD2] = { 0x2c4, BIT(23) },
+ [RST_BUS_TVD3] = { 0x2c4, BIT(24) },
+ [RST_BUS_TVD_TOP] = { 0x2c4, BIT(25) },
+ [RST_BUS_TCON0] = { 0x2c4, BIT(26) },
+ [RST_BUS_TCON1] = { 0x2c4, BIT(27) },
+ [RST_BUS_TCON_TVE0] = { 0x2c4, BIT(28) },
+ [RST_BUS_TCON_TVE1] = { 0x2c4, BIT(29) },
+ [RST_BUS_TCON_TOP] = { 0x2c4, BIT(30) },
+ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
+
+ [RST_BUS_LVDS] = { 0x2c8, BIT(0) },
+
+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
+ [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
+ [RST_BUS_AC97] = { 0x2d0, BIT(2) },
+ [RST_BUS_IR0] = { 0x2d0, BIT(6) },
+ [RST_BUS_IR1] = { 0x2d0, BIT(7) },
+ [RST_BUS_THS] = { 0x2d0, BIT(8) },
+ [RST_BUS_KEYPAD] = { 0x2d0, BIT(10) },
+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
+ [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
+ [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
+
+ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
+ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
+ [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
+ [RST_BUS_I2C3] = { 0x2d8, BIT(3) },
+ [RST_BUS_CAN] = { 0x2d8, BIT(4) },
+ [RST_BUS_SCR] = { 0x2d8, BIT(5) },
+ [RST_BUS_PS20] = { 0x2d8, BIT(6) },
+ [RST_BUS_PS21] = { 0x2d8, BIT(7) },
+ [RST_BUS_I2C4] = { 0x2d8, BIT(15) },
+ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
+ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
+ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
+ [RST_BUS_UART3] = { 0x2d8, BIT(19) },
+ [RST_BUS_UART4] = { 0x2d8, BIT(20) },
+ [RST_BUS_UART5] = { 0x2d8, BIT(21) },
+ [RST_BUS_UART6] = { 0x2d8, BIT(22) },
+ [RST_BUS_UART7] = { 0x2d8, BIT(23) },
+};
+
+static const struct sunxi_ccu_desc sun8i_r40_ccu_desc = {
+ .ccu_clks = sun8i_r40_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun8i_r40_ccu_clks),
+
+ .hw_clks = &sun8i_r40_hw_clks,
+
+ .resets = sun8i_r40_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun8i_r40_ccu_resets),
+};
+
+static struct ccu_mux_nb sun8i_r40_cpu_nb = {
+ .common = &cpu_clk.common,
+ .cm = &cpu_clk.mux,
+ .delay_us = 1, /* > 8 clock cycles at 24 MHz */
+ .bypass_index = 1, /* index of 24 MHz oscillator */
+};
+
+static void __init sun8i_r40_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN8I_R40_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN8I_R40_PLL_AUDIO_REG);
+
+ sunxi_ccu_probe(node, reg, &sun8i_r40_ccu_desc);
+
+ ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
+ &sun8i_r40_cpu_nb);
+}
+CLK_OF_DECLARE(sun8i_r40_ccu, "allwinner,sun8i-r40-ccu",
+ sun8i_r40_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.h b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
new file mode 100644
index 000000000000..109b8f55754e
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_R40_H_
+#define _CCU_SUN8I_R40_H_
+
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+#define CLK_OSC24M_2X 0
+#define CLK_OSC24M_32K 1
+#define CLK_PLL_CPU 2
+#define CLK_PLL_AUDIO_BASE 3
+#define CLK_PLL_AUDIO 4
+#define CLK_PLL_AUDIO_2X 5
+#define CLK_PLL_AUDIO_4X 6
+#define CLK_PLL_AUDIO_8X 7
+#define CLK_PLL_VIDEO0 8
+#define CLK_PLL_VIDEO0_2X 9
+#define CLK_PLL_VE 10
+#define CLK_PLL_DDR0 11
+#define CLK_PLL_PERIPH0 12
+#define CLK_PLL_PERIPH0_2X 13
+#define CLK_PLL_PERIPH1 14
+#define CLK_PLL_PERIPH1_2X 15
+#define CLK_PLL_VIDEO1 16
+#define CLK_PLL_VIDEO1_2X 17
+#define CLK_PLL_SATA 18
+#define CLK_PLL_GPU 19
+#define CLK_PLL_MIPI 20
+#define CLK_PLL_DE 21
+#define CLK_PLL_DDR1 22
+
+/* The CPU clock is exported */
+
+#define CLK_AXI 24
+#define CLK_AHB1 25
+#define CLK_APB1 26
+#define CLK_APB2 27
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM 133
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS 156
+
+/* Another bunch of module clocks are exported */
+
+#define CLK_NUMBER (CLK_OUTB + 1)
+
+#endif /* _CCU_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..b11eb7e614a5
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-r40-ccu.h
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_
+#define _DT_BINDINGS_CLK_SUN8I_R40_H_
+
+#define CLK_CPU 23
+
+#define CLK_BUS_MIPI_DSI 28
+#define CLK_BUS_CE 29
+#define CLK_BUS_DMA 30
+#define CLK_BUS_MMC0 31
+#define CLK_BUS_MMC1 32
+#define CLK_BUS_MMC2 33
+#define CLK_BUS_MMC3 34
+#define CLK_BUS_NAND 35
+#define CLK_BUS_DRAM 36
+#define CLK_BUS_EMAC 37
+#define CLK_BUS_TS 38
+#define CLK_BUS_SPI0 39
+#define CLK_BUS_SPI1 40
+#define CLK_BUS_SPI2 41
+#define CLK_BUS_SPI3 42
+#define CLK_BUS_SATA 43
+#define CLK_BUS_OTG 44
+#define CLK_BUS_EHCI0 45
+#define CLK_BUS_EHCI1 46
+#define CLK_BUS_EHCI2 47
+#define CLK_BUS_OHCI0 48
+#define CLK_BUS_OHCI1 49
+#define CLK_BUS_OHCI2 50
+#define CLK_BUS_VE 51
+#define CLK_BUS_DE_MP 52
+#define CLK_BUS_DEINTERLACE 53
+#define CLK_BUS_CSI0 54
+#define CLK_BUS_CSI1 55
+#define CLK_BUS_HDMI_SLOW 56
+#define CLK_BUS_HDMI 57
+#define CLK_BUS_DE 58
+#define CLK_BUS_TVE0 59
+#define CLK_BUS_TVE1 60
+#define CLK_BUS_TVE_TOP 61
+#define CLK_BUS_GMAC 62
+#define CLK_BUS_GPU 63
+#define CLK_BUS_TVD0 64
+#define CLK_BUS_TVD1 65
+#define CLK_BUS_TVD2 66
+#define CLK_BUS_TVD3 67
+#define CLK_BUS_TVD_TOP 68
+#define CLK_BUS_TCON0 69
+#define CLK_BUS_TCON1 70
+#define CLK_BUS_TVE0_TCON 71
+#define CLK_BUS_TVE1_TCON 72
+#define CLK_BUS_TCON_TOP 73
+#define CLK_BUS_CODEC 74
+#define CLK_BUS_SPDIF 75
+#define CLK_BUS_AC97 76
+#define CLK_BUS_PIO 77
+#define CLK_BUS_IR0 78
+#define CLK_BUS_IR1 79
+#define CLK_BUS_THS 80
+#define CLK_BUS_KEYPAD 81
+#define CLK_BUS_I2S0 82
+#define CLK_BUS_I2S1 83
+#define CLK_BUS_I2S2 84
+#define CLK_BUS_I2C0 85
+#define CLK_BUS_I2C1 86
+#define CLK_BUS_I2C2 87
+#define CLK_BUS_I2C3 88
+#define CLK_BUS_CAN 89
+#define CLK_BUS_SCR 90
+#define CLK_BUS_PS20 91
+#define CLK_BUS_PS21 92
+#define CLK_BUS_I2C4 93
+#define CLK_BUS_UART0 94
+#define CLK_BUS_UART1 95
+#define CLK_BUS_UART2 96
+#define CLK_BUS_UART3 97
+#define CLK_BUS_UART4 98
+#define CLK_BUS_UART5 99
+#define CLK_BUS_UART6 100
+#define CLK_BUS_UART7 101
+#define CLK_BUS_DBG 102
+
+#define CLK_THS 103
+#define CLK_NAND 104
+#define CLK_MMC0 105
+#define CLK_MMC1 106
+#define CLK_MMC2 107
+#define CLK_MMC3 108
+#define CLK_TS 109
+#define CLK_CE 110
+#define CLK_SPI0 111
+#define CLK_SPI1 112
+#define CLK_SPI2 113
+#define CLK_SPI3 114
+#define CLK_I2S0 115
+#define CLK_I2S1 116
+#define CLK_I2S2 117
+#define CLK_AC97 118
+#define CLK_SPDIF 119
+#define CLK_KEYPAD 120
+#define CLK_SATA 121
+#define CLK_USB_PHY0 122
+#define CLK_USB_PHY1 123
+#define CLK_USB_PHY2 124
+#define CLK_USB_OHCI0 125
+#define CLK_USB_OHCI1 126
+#define CLK_USB_OHCI2 127
+#define CLK_USB_OHCI0_12M 128
+#define CLK_USB_OHCI1_12M 129
+#define CLK_USB_OHCI2_12M 130
+#define CLK_IR0 131
+#define CLK_IR1 132
+
+#define CLK_DRAM_VE 134
+#define CLK_DRAM_CSI0 135
+#define CLK_DRAM_DEINTERLACE 136
+#define CLK_DRAM_TS 137
+#define CLK_DRAM_TVD 138
+#define CLK_DRAM_DE_MP 139
+#define CLK_DE 140
+#define CLK_DE_MP 141
+#define CLK_TCON0 142
+#define CLK_TCON1 143
+#define CLK_TCON_TVE0 144
+#define CLK_TCON_TVE1 145
+#define CLK_DEINTERLACE 146
+#define CLK_CSI1_MCLK 147
+#define CLK_CSI_SCLK 148
+#define CLK_CSI0_MCLK 149
+#define CLK_VE 150
+#define CLK_ADDA 151
+#define CLK_ADDA_4X 152
+#define CLK_AVS 153
+#define CLK_HDMI 154
+#define CLK_HDMI_SLOW 155
+
+#define CLK_MIPI_DSI 157
+#define CLK_TVE0 158
+#define CLK_TVE1 159
+#define CLK_TVD0 160
+#define CLK_TVD1 161
+#define CLK_TVD2 162
+#define CLK_TVD3 163
+#define CLK_GPU 164
+#define CLK_OUTA 165
+#define CLK_OUTB 166
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/reset/sun8i-r40-ccu.h b/include/dt-bindings/reset/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..690839cd49bc
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-r40-ccu.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_R40_H_
+#define _DT_BINDINGS_RST_SUN8I_R40_H_
+
+#define RST_USB_PHY0 0
+#define RST_USB_PHY1 1
+#define RST_USB_PHY2 2
+
+#define RST_MBUS 3
+
+#define RST_BUS_MIPI_DSI 4
+#define RST_BUS_CE 5
+#define RST_BUS_DMA 6
+#define RST_BUS_MMC0 7
+#define RST_BUS_MMC1 8
+#define RST_BUS_MMC2 9
+#define RST_BUS_MMC3 10
+#define RST_BUS_NAND 11
+#define RST_BUS_DRAM 12
+#define RST_BUS_EMAC 13
+#define RST_BUS_TS 14
+#define RST_BUS_SPI0 15
+#define RST_BUS_SPI1 16
+#define RST_BUS_SPI2 17
+#define RST_BUS_SPI3 18
+#define RST_BUS_SATA 19
+#define RST_BUS_OTG 20
+#define RST_BUS_EHCI0 21
+#define RST_BUS_EHCI1 22
+#define RST_BUS_EHCI2 23
+#define RST_BUS_OHCI0 24
+#define RST_BUS_OHCI1 25
+#define RST_BUS_OHCI2 26
+#define RST_BUS_VE 27
+#define RST_BUS_DE_MP 28
+#define RST_BUS_DEINTERLACE 29
+#define RST_BUS_CSI0 30
+#define RST_BUS_CSI1 31
+#define RST_BUS_HDMI_SLOW 32
+#define RST_BUS_HDMI 33
+#define RST_BUS_DE 34
+#define RST_BUS_TVE0 35
+#define RST_BUS_TVE1 36
+#define RST_BUS_TVE_TOP 37
+#define RST_BUS_GMAC 38
+#define RST_BUS_GPU 39
+#define RST_BUS_TVD0 40
+#define RST_BUS_TVD1 41
+#define RST_BUS_TVD2 42
+#define RST_BUS_TVD3 43
+#define RST_BUS_TVD_TOP 44
+#define RST_BUS_TCON0 45
+#define RST_BUS_TCON1 46
+#define RST_BUS_TCON_TVE0 47
+#define RST_BUS_TCON_TVE1 48
+#define RST_BUS_TCON_TOP 49
+#define RST_BUS_DBG 50
+#define RST_BUS_LVDS 51
+#define RST_BUS_CODEC 52
+#define RST_BUS_SPDIF 53
+#define RST_BUS_AC97 54
+#define RST_BUS_IR0 55
+#define RST_BUS_IR1 56
+#define RST_BUS_THS 57
+#define RST_BUS_KEYPAD 58
+#define RST_BUS_I2S0 59
+#define RST_BUS_I2S1 60
+#define RST_BUS_I2S2 61
+#define RST_BUS_I2C0 62
+#define RST_BUS_I2C1 63
+#define RST_BUS_I2C2 64
+#define RST_BUS_I2C3 65
+#define RST_BUS_CAN 66
+#define RST_BUS_SCR 67
+#define RST_BUS_PS20 68
+#define RST_BUS_PS21 69
+#define RST_BUS_I2C4 70
+#define RST_BUS_UART0 71
+#define RST_BUS_UART1 72
+#define RST_BUS_UART2 73
+#define RST_BUS_UART3 74
+#define RST_BUS_UART4 75
+#define RST_BUS_UART5 76
+#define RST_BUS_UART6 77
+#define RST_BUS_UART7 78
+
+#endif /* _DT_BINDINGS_RST_SUN8I_R40_H_ */
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 4/9] clk: sunxi-ng: support R40 SoC
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
Allwinner R40 SoC have a clock controller module in the style of the
SoCs beyond sun6i, however, it's more rich and complex.
Add support for it.
As the user manual is still not available, this driver is made with
knowledge from clk-sun8iw11.c in the BSP kernel source.
---
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1140 +++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 68 ++
include/dt-bindings/clock/sun8i-r40-ccu.h | 189 +++++
include/dt-bindings/reset/sun8i-r40-ccu.h | 128 ++++
6 files changed, 1536 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 695bbf9ef428..31d005051b6e 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -131,6 +131,16 @@ config SUN8I_V3S_CCU
select SUNXI_CCU_PHASE
default MACH_SUN8I
+config SUN8I_R40_CCU
+ bool "Support for the Allwinner R40 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NKMP
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ default MACH_SUN8I
+
config SUN9I_A80_CCU
bool "Support for the Allwinner A80 CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 6feaac0c5600..3a512b1adcf7 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
+obj-$(CONFIG_SUN8I_R40_CCU) += ccu-sun8i-r40.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
new file mode 100644
index 000000000000..150e086e9765
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
@@ -0,0 +1,1140 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-r40.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
+ "osc24M", 0x000,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ 16, 2, /* P */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_R40_PLL_AUDIO_REG 0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+ "osc24M", 0x008,
+ 8, 7, /* N */
+ 0, 5, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
+ "osc24M", 0x0010,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+ "osc24M", 0x0018,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
+ "osc24M", 0x020,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+/* According to the BSP driver, pll-periph{0,1} have M at 0:1 */
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph0_clk, "pll-periph0",
+ "osc24M", 0x028,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph1_clk, "pll-periph1",
+ "osc24M", 0x02c,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
+ "osc24M", 0x030,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+/*
+ * For the special bit in gate part, please see the BSP source code at
+ * https://github.com/BPI-SINOVOIP/BPI-M2U-bsp/blob/master/linux-sunxi/drivers/clk/sunxi/clk-sun8iw11.c#L665
+ */
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_sata_clk, "pll-sata",
+ "osc24M", 0x034,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31) | BIT(14), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+ "osc24M", 0x038,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static const char * const pll_mipi_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_NKM_WITH_MUX_GATE_LOCK(pll_mipi_clk, "pll-mipi",
+ pll_mipi_parents, 0x040,
+ 8, 4, /* N */
+ 4, 2, /* K */
+ 0, 4, /* M */
+ 21, 0, /* mux */
+ BIT(31) | BIT(23) | BIT(22), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+ "osc24M", 0x0048,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
+ "osc24M", 0x04c,
+ 8, 7, /* N */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+ "pll-cpu" , "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+ 0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+ "axi" , "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .mux = {
+ .shift = 12,
+ .width = 2,
+
+ .variable_prediv = {
+ .index = 3,
+ .shift = 6,
+ .width = 2,
+ },
+ },
+
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb1",
+ ahb1_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb1_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+ 0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+ "pll-periph0-2x" , "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_mmc3_clk, "bus-mmc3", "ahb1",
+ 0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
+ 0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb1",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb1",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_spi3_clk, "bus-spi3", "ahb1",
+ 0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_sata_clk, "bus-sata", "ahb1",
+ 0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
+ 0x060, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
+ 0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb1",
+ 0x060, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb1",
+ 0x060, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
+ 0x060, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb1",
+ 0x060, BIT(30), 0);
+static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb1",
+ 0x060, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_de_mp_clk, "bus-de-mp", "ahb1",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi0_clk, "bus-csi0", "ahb1",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_csi1_clk, "bus-csi1", "ahb1",
+ 0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_hdmi_slow_clk, "bus-hdmi-slow", "ahb1",
+ 0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_tve0_clk, "bus-tve0", "ahb1",
+ 0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_tve1_clk, "bus-tve1", "ahb1",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_tve_top_clk, "bus-tve-top", "ahb1",
+ 0x064, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_gmac_clk, "bus-gmac", "ahb1",
+ 0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
+ 0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_tvd0_clk, "bus-tvd0", "ahb1",
+ 0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_tvd1_clk, "bus-tvd1", "ahb1",
+ 0x064, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_tvd2_clk, "bus-tvd2", "ahb1",
+ 0x064, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_tvd3_clk, "bus-tvd3", "ahb1",
+ 0x064, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_tvd_top_clk, "bus-tvd-top", "ahb1",
+ 0x064, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
+ 0x064, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
+ 0x064, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_tve0_tcon_clk, "bus-tve0-tcon", "ahb1",
+ 0x064, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_tve1_tcon_clk, "bus-tve1-tcon", "ahb1",
+ 0x064, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb1",
+ 0x064, BIT(30), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ac97_clk, "bus-ac97", "apb1",
+ 0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ir0_clk, "bus-ir0", "apb1",
+ 0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ir1_clk, "bus-ir1", "apb1",
+ 0x068, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
+ 0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_keypad_clk, "bus-keypad", "apb1",
+ 0x068, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
+ 0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
+ 0x068, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
+ 0x068, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
+ 0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2",
+ 0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_can_clk, "bus-can", "apb2",
+ 0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
+ 0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ps20_clk, "bus-ps20", "apb2",
+ 0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ps21_clk, "bus-ps21", "apb2",
+ 0x06c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2",
+ 0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
+ 0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2",
+ 0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2",
+ 0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_uart6_clk, "bus-uart6", "apb2",
+ 0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_uart7_clk, "bus-uart7", "apb2",
+ 0x06c, BIT(23), 0);
+
+/* Educated guess: the BSP clock driver do not have this clock */
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
+ 0x070, BIT(7), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ths_clk, "ths", "osc24M",
+ 0x074, 0, 2, BIT(31), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0ac,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+ 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", i2s_parents,
+ 0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_parents,
+ 0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const keypad_parents[] = { "osc24M", "osc32k", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(keypad_clk, "keypad", keypad_parents, 0x0c4,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 25, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const sata_parents[] = { "pll-sata", "pll-periph0", };
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+ 0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
+ 0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
+ 0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M",
+ 0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
+ 0x0cc, BIT(16), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc24M",
+ 0x0cc, BIT(17), 0);
+static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc24M",
+ 0x0cc, BIT(18), 0);
+
+static const char * const usb_ohci12m_parents[] = { "osc24M-2x", "osc24M",
+ "osc32k" };
+static SUNXI_CCU_MUX(usb_ohci0_12m_clk, "usb-ohci0-12m", usb_ohci12m_parents,
+ 0x0cc, 20, 2, 0);
+static SUNXI_CCU_MUX(usb_ohci1_12m_clk, "usb-ohci1-12m", usb_ohci12m_parents,
+ 0x0cc, 22, 2, 0);
+static SUNXI_CCU_MUX(usb_ohci2_12m_clk, "usb-ohci2-12m", usb_ohci12m_parents,
+ 0x0cc, 24, 2, 0);
+
+static const char * const ir_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_clk, "ir0", ir_parents, 0x0d0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_clk, "ir1", ir_parents, 0x0d4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+ 0x0f4, 0, 2, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk, "dram-csi0", "dram",
+ 0x100, BIT(1), 0);
+/*
+ * TODO: Which is this? deinterlace or CSI1?
+ * In the BSP clock source code the two mod clocks both uses DRAM_GATE 2
+ */
+static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
+ 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
+ 0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "dram",
+ 0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_de_mp_clk, "dram-de-mp", "dram",
+ 0x100, BIT(5), 0);
+
+static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+ 0x104, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+ 0x108, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x",
+ "pll-mipi" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_clk, "tcon0", tcon_parents,
+ 0x110, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_clk, "tcon1", tcon_parents,
+ 0x114, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve0_clk, "tcon-tve0", tcon_parents,
+ 0x118, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve1_clk, "tcon-tve1", tcon_parents,
+ 0x11c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
+ 0x124, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk", csi_mclk_parents,
+ 0x130, 0, 5, 8, 3, BIT(15), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
+ 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
+ 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+ 0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(adda_clk, "adda", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(adda_4x_clk, "adda-4x", "pll-audio-4x",
+ 0x140, BIT(30), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
+ 0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M",
+ 0x154, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-ddr0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x15c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ CLK_IS_CRITICAL);
+
+static const char * const mipi_dsi_parents[] = { "pll-video0", "pll-video1",
+ "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi", mipi_dsi_parents,
+ 0x168, 0, 4, 8, 2, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tve0_clk, "tve0", tcon_parents,
+ 0x180, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tve1_clk, "tve1", tcon_parents,
+ 0x184, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tvd_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd0_clk, "tvd0", tvd_parents,
+ 0x188, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd1_clk, "tvd1", tvd_parents,
+ 0x18c, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd2_clk, "tvd2", tvd_parents,
+ 0x190, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd3_clk, "tvd3", tvd_parents,
+ 0x194, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+ 0x1a0, 0, 3, BIT(31), 0);
+
+static const char * const out_parents[] = { "osc24M-32k", "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(outa_clk, "outa", out_parents, 0x1f0,
+ 8, 5, /* M */
+ 20, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_MP_WITH_MUX_GATE(outb_clk, "outb", out_parents, 0x1f4,
+ 8, 5, /* M */
+ 20, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static struct ccu_common *sun8i_r40_ccu_clks[] = {
+ &pll_cpu_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_periph0_clk.common,
+ &pll_periph1_clk.common,
+ &pll_video1_clk.common,
+ &pll_sata_clk.common,
+ &pll_gpu_clk.common,
+ &pll_mipi_clk.common,
+ &pll_de_clk.common,
+ &pll_ddr1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb1_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &bus_mipi_dsi_clk.common,
+ &bus_ce_clk.common,
+ &bus_dma_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_mmc3_clk.common,
+ &bus_nand_clk.common,
+ &bus_dram_clk.common,
+ &bus_emac_clk.common,
+ &bus_ts_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &bus_spi2_clk.common,
+ &bus_spi3_clk.common,
+ &bus_sata_clk.common,
+ &bus_otg_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_ehci1_clk.common,
+ &bus_ehci2_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ohci1_clk.common,
+ &bus_ohci2_clk.common,
+ &bus_ve_clk.common,
+ &bus_de_mp_clk.common,
+ &bus_deinterlace_clk.common,
+ &bus_csi0_clk.common,
+ &bus_csi1_clk.common,
+ &bus_hdmi_slow_clk.common,
+ &bus_hdmi_clk.common,
+ &bus_de_clk.common,
+ &bus_tve0_clk.common,
+ &bus_tve1_clk.common,
+ &bus_tve_top_clk.common,
+ &bus_gmac_clk.common,
+ &bus_gpu_clk.common,
+ &bus_tvd0_clk.common,
+ &bus_tvd1_clk.common,
+ &bus_tvd2_clk.common,
+ &bus_tvd3_clk.common,
+ &bus_tvd_top_clk.common,
+ &bus_tcon0_clk.common,
+ &bus_tcon1_clk.common,
+ &bus_tve0_tcon_clk.common,
+ &bus_tve1_tcon_clk.common,
+ &bus_tcon_top_clk.common,
+ &bus_codec_clk.common,
+ &bus_spdif_clk.common,
+ &bus_ac97_clk.common,
+ &bus_pio_clk.common,
+ &bus_ir0_clk.common,
+ &bus_ir1_clk.common,
+ &bus_ths_clk.common,
+ &bus_keypad_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2s1_clk.common,
+ &bus_i2s2_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_i2c3_clk.common,
+ &bus_can_clk.common,
+ &bus_scr_clk.common,
+ &bus_ps20_clk.common,
+ &bus_ps21_clk.common,
+ &bus_i2c4_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_uart3_clk.common,
+ &bus_uart4_clk.common,
+ &bus_uart5_clk.common,
+ &bus_uart6_clk.common,
+ &bus_uart7_clk.common,
+ &bus_dbg_clk.common,
+ &ths_clk.common,
+ &nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &mmc3_clk.common,
+ &ts_clk.common,
+ &ce_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &spi3_clk.common,
+ &i2s0_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &ac97_clk.common,
+ &spdif_clk.common,
+ &keypad_clk.common,
+ &sata_clk.common,
+ &usb_phy0_clk.common,
+ &usb_phy1_clk.common,
+ &usb_phy2_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_ohci2_clk.common,
+ &usb_ohci0_12m_clk.common,
+ &usb_ohci1_12m_clk.common,
+ &usb_ohci2_12m_clk.common,
+ &ir0_clk.common,
+ &ir1_clk.common,
+ &dram_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi0_clk.common,
+ &dram_deinterlace_clk.common,
+ &dram_ts_clk.common,
+ &dram_tvd_clk.common,
+ &dram_de_mp_clk.common,
+ &de_clk.common,
+ &de_mp_clk.common,
+ &tcon0_clk.common,
+ &tcon1_clk.common,
+ &tcon_tve0_clk.common,
+ &tcon_tve1_clk.common,
+ &deinterlace_clk.common,
+ &csi1_mclk_clk.common,
+ &csi_sclk_clk.common,
+ &csi0_mclk_clk.common,
+ &ve_clk.common,
+ &adda_clk.common,
+ &adda_4x_clk.common,
+ &avs_clk.common,
+ &hdmi_clk.common,
+ &hdmi_slow_clk.common,
+ &mbus_clk.common,
+ &mipi_dsi_clk.common,
+ &tve0_clk.common,
+ &tve1_clk.common,
+ &tvd0_clk.common,
+ &tvd1_clk.common,
+ &tvd2_clk.common,
+ &tvd3_clk.common,
+ &gpu_clk.common,
+ &outa_clk.common,
+ &outb_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+ "pll-periph0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
+ "pll-periph1", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, 0);
+static CLK_FIXED_FACTOR(osc24m_2x_clk, "osc24M-2x",
+ "osc24M", 1, 2, 0);
+static CLK_FIXED_FACTOR(osc24m_32k_clk, "osc24M-32k",
+ "osc24M", 750, 1, 0);
+
+static struct clk_hw_onecell_data sun8i_r40_hw_clks = {
+ .hws = {
+ [CLK_OSC24M_2X] = &osc24m_2x_clk.hw,
+ [CLK_OSC24M_32K] = &osc24m_32k_clk.hw,
+ [CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_PLL_SATA] = &pll_sata_clk.common.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
+ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_MMC3] = &bus_mmc3_clk.common.hw,
+ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
+ [CLK_BUS_SPI3] = &bus_spi3_clk.common.hw,
+ [CLK_BUS_SATA] = &bus_sata_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
+ [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
+ [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_DE_MP] = &bus_de_mp_clk.common.hw,
+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
+ [CLK_BUS_CSI0] = &bus_csi0_clk.common.hw,
+ [CLK_BUS_CSI1] = &bus_csi1_clk.common.hw,
+ [CLK_BUS_HDMI_SLOW] = &bus_hdmi_slow_clk.common.hw,
+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_TVE0] = &bus_tve0_clk.common.hw,
+ [CLK_BUS_TVE1] = &bus_tve1_clk.common.hw,
+ [CLK_BUS_TVE_TOP] = &bus_tve_top_clk.common.hw,
+ [CLK_BUS_GMAC] = &bus_gmac_clk.common.hw,
+ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
+ [CLK_BUS_TVD0] = &bus_tvd0_clk.common.hw,
+ [CLK_BUS_TVD1] = &bus_tvd1_clk.common.hw,
+ [CLK_BUS_TVD2] = &bus_tvd2_clk.common.hw,
+ [CLK_BUS_TVD3] = &bus_tvd3_clk.common.hw,
+ [CLK_BUS_TVD_TOP] = &bus_tvd_top_clk.common.hw,
+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
+ [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
+ [CLK_BUS_TVE0_TCON] = &bus_tve0_tcon_clk.common.hw,
+ [CLK_BUS_TVE1_TCON] = &bus_tve1_tcon_clk.common.hw,
+ [CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_BUS_AC97] = &bus_ac97_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_IR0] = &bus_ir0_clk.common.hw,
+ [CLK_BUS_IR1] = &bus_ir1_clk.common.hw,
+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
+ [CLK_BUS_KEYPAD] = &bus_keypad_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
+ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
+ [CLK_BUS_CAN] = &bus_can_clk.common.hw,
+ [CLK_BUS_SCR] = &bus_scr_clk.common.hw,
+ [CLK_BUS_PS20] = &bus_ps20_clk.common.hw,
+ [CLK_BUS_PS21] = &bus_ps21_clk.common.hw,
+ [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
+ [CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
+ [CLK_BUS_UART6] = &bus_uart6_clk.common.hw,
+ [CLK_BUS_UART7] = &bus_uart7_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_THS] = &ths_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
+ [CLK_USB_OHCI0_12M] = &usb_ohci0_12m_clk.common.hw,
+ [CLK_USB_OHCI1_12M] = &usb_ohci1_12m_clk.common.hw,
+ [CLK_USB_OHCI2_12M] = &usb_ohci2_12m_clk.common.hw,
+ [CLK_IR0] = &ir0_clk.common.hw,
+ [CLK_IR1] = &ir1_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_DE_MP] = &dram_de_mp_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0] = &tcon0_clk.common.hw,
+ [CLK_TCON1] = &tcon1_clk.common.hw,
+ [CLK_TCON_TVE0] = &tcon_tve0_clk.common.hw,
+ [CLK_TCON_TVE1] = &tcon_tve1_clk.common.hw,
+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
+ [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_ADDA] = &adda_clk.common.hw,
+ [CLK_ADDA_4X] = &adda_4x_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_MIPI_DSI] = &mipi_dsi_clk.common.hw,
+ [CLK_TVE0] = &tve0_clk.common.hw,
+ [CLK_TVE1] = &tve1_clk.common.hw,
+ [CLK_TVD0] = &tvd0_clk.common.hw,
+ [CLK_TVD1] = &tvd1_clk.common.hw,
+ [CLK_TVD2] = &tvd2_clk.common.hw,
+ [CLK_TVD3] = &tvd3_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ [CLK_OUTA] = &outa_clk.common.hw,
+ [CLK_OUTB] = &outb_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_r40_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+
+ [RST_MBUS] = { 0x0fc, BIT(31) },
+
+ [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
+ [RST_BUS_CE] = { 0x2c0, BIT(5) },
+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
+ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
+ [RST_BUS_MMC3] = { 0x2c0, BIT(11) },
+ [RST_BUS_NAND] = { 0x2c0, BIT(13) },
+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
+ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
+ [RST_BUS_TS] = { 0x2c0, BIT(18) },
+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
+ [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
+ [RST_BUS_SPI2] = { 0x2c0, BIT(22) },
+ [RST_BUS_SPI3] = { 0x2c0, BIT(23) },
+ [RST_BUS_SATA] = { 0x2c0, BIT(24) },
+ [RST_BUS_OTG] = { 0x2c0, BIT(25) },
+ [RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
+ [RST_BUS_EHCI1] = { 0x2c0, BIT(27) },
+ [RST_BUS_EHCI2] = { 0x2c0, BIT(28) },
+ [RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
+ [RST_BUS_OHCI1] = { 0x2c0, BIT(30) },
+ [RST_BUS_OHCI2] = { 0x2c0, BIT(31) },
+
+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
+ [RST_BUS_DE_MP] = { 0x2c4, BIT(2) },
+ [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
+ [RST_BUS_CSI0] = { 0x2c4, BIT(8) },
+ [RST_BUS_CSI1] = { 0x2c4, BIT(9) },
+ [RST_BUS_HDMI_SLOW] = { 0x2c4, BIT(10) },
+ [RST_BUS_HDMI] = { 0x2c4, BIT(11) },
+ [RST_BUS_DE] = { 0x2c4, BIT(12) },
+ [RST_BUS_TVE0] = { 0x2c4, BIT(13) },
+ [RST_BUS_TVE1] = { 0x2c4, BIT(14) },
+ [RST_BUS_TVE_TOP] = { 0x2c4, BIT(15) },
+ [RST_BUS_GMAC] = { 0x2c4, BIT(17) },
+ [RST_BUS_GPU] = { 0x2c4, BIT(20) },
+ [RST_BUS_TVD0] = { 0x2c4, BIT(21) },
+ [RST_BUS_TVD1] = { 0x2c4, BIT(22) },
+ [RST_BUS_TVD2] = { 0x2c4, BIT(23) },
+ [RST_BUS_TVD3] = { 0x2c4, BIT(24) },
+ [RST_BUS_TVD_TOP] = { 0x2c4, BIT(25) },
+ [RST_BUS_TCON0] = { 0x2c4, BIT(26) },
+ [RST_BUS_TCON1] = { 0x2c4, BIT(27) },
+ [RST_BUS_TCON_TVE0] = { 0x2c4, BIT(28) },
+ [RST_BUS_TCON_TVE1] = { 0x2c4, BIT(29) },
+ [RST_BUS_TCON_TOP] = { 0x2c4, BIT(30) },
+ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
+
+ [RST_BUS_LVDS] = { 0x2c8, BIT(0) },
+
+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
+ [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
+ [RST_BUS_AC97] = { 0x2d0, BIT(2) },
+ [RST_BUS_IR0] = { 0x2d0, BIT(6) },
+ [RST_BUS_IR1] = { 0x2d0, BIT(7) },
+ [RST_BUS_THS] = { 0x2d0, BIT(8) },
+ [RST_BUS_KEYPAD] = { 0x2d0, BIT(10) },
+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
+ [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
+ [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
+
+ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
+ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
+ [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
+ [RST_BUS_I2C3] = { 0x2d8, BIT(3) },
+ [RST_BUS_CAN] = { 0x2d8, BIT(4) },
+ [RST_BUS_SCR] = { 0x2d8, BIT(5) },
+ [RST_BUS_PS20] = { 0x2d8, BIT(6) },
+ [RST_BUS_PS21] = { 0x2d8, BIT(7) },
+ [RST_BUS_I2C4] = { 0x2d8, BIT(15) },
+ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
+ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
+ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
+ [RST_BUS_UART3] = { 0x2d8, BIT(19) },
+ [RST_BUS_UART4] = { 0x2d8, BIT(20) },
+ [RST_BUS_UART5] = { 0x2d8, BIT(21) },
+ [RST_BUS_UART6] = { 0x2d8, BIT(22) },
+ [RST_BUS_UART7] = { 0x2d8, BIT(23) },
+};
+
+static const struct sunxi_ccu_desc sun8i_r40_ccu_desc = {
+ .ccu_clks = sun8i_r40_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun8i_r40_ccu_clks),
+
+ .hw_clks = &sun8i_r40_hw_clks,
+
+ .resets = sun8i_r40_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun8i_r40_ccu_resets),
+};
+
+static struct ccu_mux_nb sun8i_r40_cpu_nb = {
+ .common = &cpu_clk.common,
+ .cm = &cpu_clk.mux,
+ .delay_us = 1, /* > 8 clock cycles at 24 MHz */
+ .bypass_index = 1, /* index of 24 MHz oscillator */
+};
+
+static void __init sun8i_r40_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN8I_R40_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN8I_R40_PLL_AUDIO_REG);
+
+ sunxi_ccu_probe(node, reg, &sun8i_r40_ccu_desc);
+
+ ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
+ &sun8i_r40_cpu_nb);
+}
+CLK_OF_DECLARE(sun8i_r40_ccu, "allwinner,sun8i-r40-ccu",
+ sun8i_r40_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.h b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
new file mode 100644
index 000000000000..109b8f55754e
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_R40_H_
+#define _CCU_SUN8I_R40_H_
+
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+#define CLK_OSC24M_2X 0
+#define CLK_OSC24M_32K 1
+#define CLK_PLL_CPU 2
+#define CLK_PLL_AUDIO_BASE 3
+#define CLK_PLL_AUDIO 4
+#define CLK_PLL_AUDIO_2X 5
+#define CLK_PLL_AUDIO_4X 6
+#define CLK_PLL_AUDIO_8X 7
+#define CLK_PLL_VIDEO0 8
+#define CLK_PLL_VIDEO0_2X 9
+#define CLK_PLL_VE 10
+#define CLK_PLL_DDR0 11
+#define CLK_PLL_PERIPH0 12
+#define CLK_PLL_PERIPH0_2X 13
+#define CLK_PLL_PERIPH1 14
+#define CLK_PLL_PERIPH1_2X 15
+#define CLK_PLL_VIDEO1 16
+#define CLK_PLL_VIDEO1_2X 17
+#define CLK_PLL_SATA 18
+#define CLK_PLL_GPU 19
+#define CLK_PLL_MIPI 20
+#define CLK_PLL_DE 21
+#define CLK_PLL_DDR1 22
+
+/* The CPU clock is exported */
+
+#define CLK_AXI 24
+#define CLK_AHB1 25
+#define CLK_APB1 26
+#define CLK_APB2 27
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM 133
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS 156
+
+/* Another bunch of module clocks are exported */
+
+#define CLK_NUMBER (CLK_OUTB + 1)
+
+#endif /* _CCU_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..b11eb7e614a5
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-r40-ccu.h
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_
+#define _DT_BINDINGS_CLK_SUN8I_R40_H_
+
+#define CLK_CPU 23
+
+#define CLK_BUS_MIPI_DSI 28
+#define CLK_BUS_CE 29
+#define CLK_BUS_DMA 30
+#define CLK_BUS_MMC0 31
+#define CLK_BUS_MMC1 32
+#define CLK_BUS_MMC2 33
+#define CLK_BUS_MMC3 34
+#define CLK_BUS_NAND 35
+#define CLK_BUS_DRAM 36
+#define CLK_BUS_EMAC 37
+#define CLK_BUS_TS 38
+#define CLK_BUS_SPI0 39
+#define CLK_BUS_SPI1 40
+#define CLK_BUS_SPI2 41
+#define CLK_BUS_SPI3 42
+#define CLK_BUS_SATA 43
+#define CLK_BUS_OTG 44
+#define CLK_BUS_EHCI0 45
+#define CLK_BUS_EHCI1 46
+#define CLK_BUS_EHCI2 47
+#define CLK_BUS_OHCI0 48
+#define CLK_BUS_OHCI1 49
+#define CLK_BUS_OHCI2 50
+#define CLK_BUS_VE 51
+#define CLK_BUS_DE_MP 52
+#define CLK_BUS_DEINTERLACE 53
+#define CLK_BUS_CSI0 54
+#define CLK_BUS_CSI1 55
+#define CLK_BUS_HDMI_SLOW 56
+#define CLK_BUS_HDMI 57
+#define CLK_BUS_DE 58
+#define CLK_BUS_TVE0 59
+#define CLK_BUS_TVE1 60
+#define CLK_BUS_TVE_TOP 61
+#define CLK_BUS_GMAC 62
+#define CLK_BUS_GPU 63
+#define CLK_BUS_TVD0 64
+#define CLK_BUS_TVD1 65
+#define CLK_BUS_TVD2 66
+#define CLK_BUS_TVD3 67
+#define CLK_BUS_TVD_TOP 68
+#define CLK_BUS_TCON0 69
+#define CLK_BUS_TCON1 70
+#define CLK_BUS_TVE0_TCON 71
+#define CLK_BUS_TVE1_TCON 72
+#define CLK_BUS_TCON_TOP 73
+#define CLK_BUS_CODEC 74
+#define CLK_BUS_SPDIF 75
+#define CLK_BUS_AC97 76
+#define CLK_BUS_PIO 77
+#define CLK_BUS_IR0 78
+#define CLK_BUS_IR1 79
+#define CLK_BUS_THS 80
+#define CLK_BUS_KEYPAD 81
+#define CLK_BUS_I2S0 82
+#define CLK_BUS_I2S1 83
+#define CLK_BUS_I2S2 84
+#define CLK_BUS_I2C0 85
+#define CLK_BUS_I2C1 86
+#define CLK_BUS_I2C2 87
+#define CLK_BUS_I2C3 88
+#define CLK_BUS_CAN 89
+#define CLK_BUS_SCR 90
+#define CLK_BUS_PS20 91
+#define CLK_BUS_PS21 92
+#define CLK_BUS_I2C4 93
+#define CLK_BUS_UART0 94
+#define CLK_BUS_UART1 95
+#define CLK_BUS_UART2 96
+#define CLK_BUS_UART3 97
+#define CLK_BUS_UART4 98
+#define CLK_BUS_UART5 99
+#define CLK_BUS_UART6 100
+#define CLK_BUS_UART7 101
+#define CLK_BUS_DBG 102
+
+#define CLK_THS 103
+#define CLK_NAND 104
+#define CLK_MMC0 105
+#define CLK_MMC1 106
+#define CLK_MMC2 107
+#define CLK_MMC3 108
+#define CLK_TS 109
+#define CLK_CE 110
+#define CLK_SPI0 111
+#define CLK_SPI1 112
+#define CLK_SPI2 113
+#define CLK_SPI3 114
+#define CLK_I2S0 115
+#define CLK_I2S1 116
+#define CLK_I2S2 117
+#define CLK_AC97 118
+#define CLK_SPDIF 119
+#define CLK_KEYPAD 120
+#define CLK_SATA 121
+#define CLK_USB_PHY0 122
+#define CLK_USB_PHY1 123
+#define CLK_USB_PHY2 124
+#define CLK_USB_OHCI0 125
+#define CLK_USB_OHCI1 126
+#define CLK_USB_OHCI2 127
+#define CLK_USB_OHCI0_12M 128
+#define CLK_USB_OHCI1_12M 129
+#define CLK_USB_OHCI2_12M 130
+#define CLK_IR0 131
+#define CLK_IR1 132
+
+#define CLK_DRAM_VE 134
+#define CLK_DRAM_CSI0 135
+#define CLK_DRAM_DEINTERLACE 136
+#define CLK_DRAM_TS 137
+#define CLK_DRAM_TVD 138
+#define CLK_DRAM_DE_MP 139
+#define CLK_DE 140
+#define CLK_DE_MP 141
+#define CLK_TCON0 142
+#define CLK_TCON1 143
+#define CLK_TCON_TVE0 144
+#define CLK_TCON_TVE1 145
+#define CLK_DEINTERLACE 146
+#define CLK_CSI1_MCLK 147
+#define CLK_CSI_SCLK 148
+#define CLK_CSI0_MCLK 149
+#define CLK_VE 150
+#define CLK_ADDA 151
+#define CLK_ADDA_4X 152
+#define CLK_AVS 153
+#define CLK_HDMI 154
+#define CLK_HDMI_SLOW 155
+
+#define CLK_MIPI_DSI 157
+#define CLK_TVE0 158
+#define CLK_TVE1 159
+#define CLK_TVD0 160
+#define CLK_TVD1 161
+#define CLK_TVD2 162
+#define CLK_TVD3 163
+#define CLK_GPU 164
+#define CLK_OUTA 165
+#define CLK_OUTB 166
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/reset/sun8i-r40-ccu.h b/include/dt-bindings/reset/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..690839cd49bc
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-r40-ccu.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_R40_H_
+#define _DT_BINDINGS_RST_SUN8I_R40_H_
+
+#define RST_USB_PHY0 0
+#define RST_USB_PHY1 1
+#define RST_USB_PHY2 2
+
+#define RST_MBUS 3
+
+#define RST_BUS_MIPI_DSI 4
+#define RST_BUS_CE 5
+#define RST_BUS_DMA 6
+#define RST_BUS_MMC0 7
+#define RST_BUS_MMC1 8
+#define RST_BUS_MMC2 9
+#define RST_BUS_MMC3 10
+#define RST_BUS_NAND 11
+#define RST_BUS_DRAM 12
+#define RST_BUS_EMAC 13
+#define RST_BUS_TS 14
+#define RST_BUS_SPI0 15
+#define RST_BUS_SPI1 16
+#define RST_BUS_SPI2 17
+#define RST_BUS_SPI3 18
+#define RST_BUS_SATA 19
+#define RST_BUS_OTG 20
+#define RST_BUS_EHCI0 21
+#define RST_BUS_EHCI1 22
+#define RST_BUS_EHCI2 23
+#define RST_BUS_OHCI0 24
+#define RST_BUS_OHCI1 25
+#define RST_BUS_OHCI2 26
+#define RST_BUS_VE 27
+#define RST_BUS_DE_MP 28
+#define RST_BUS_DEINTERLACE 29
+#define RST_BUS_CSI0 30
+#define RST_BUS_CSI1 31
+#define RST_BUS_HDMI_SLOW 32
+#define RST_BUS_HDMI 33
+#define RST_BUS_DE 34
+#define RST_BUS_TVE0 35
+#define RST_BUS_TVE1 36
+#define RST_BUS_TVE_TOP 37
+#define RST_BUS_GMAC 38
+#define RST_BUS_GPU 39
+#define RST_BUS_TVD0 40
+#define RST_BUS_TVD1 41
+#define RST_BUS_TVD2 42
+#define RST_BUS_TVD3 43
+#define RST_BUS_TVD_TOP 44
+#define RST_BUS_TCON0 45
+#define RST_BUS_TCON1 46
+#define RST_BUS_TCON_TVE0 47
+#define RST_BUS_TCON_TVE1 48
+#define RST_BUS_TCON_TOP 49
+#define RST_BUS_DBG 50
+#define RST_BUS_LVDS 51
+#define RST_BUS_CODEC 52
+#define RST_BUS_SPDIF 53
+#define RST_BUS_AC97 54
+#define RST_BUS_IR0 55
+#define RST_BUS_IR1 56
+#define RST_BUS_THS 57
+#define RST_BUS_KEYPAD 58
+#define RST_BUS_I2S0 59
+#define RST_BUS_I2S1 60
+#define RST_BUS_I2S2 61
+#define RST_BUS_I2C0 62
+#define RST_BUS_I2C1 63
+#define RST_BUS_I2C2 64
+#define RST_BUS_I2C3 65
+#define RST_BUS_CAN 66
+#define RST_BUS_SCR 67
+#define RST_BUS_PS20 68
+#define RST_BUS_PS21 69
+#define RST_BUS_I2C4 70
+#define RST_BUS_UART0 71
+#define RST_BUS_UART1 72
+#define RST_BUS_UART2 73
+#define RST_BUS_UART3 74
+#define RST_BUS_UART4 75
+#define RST_BUS_UART5 76
+#define RST_BUS_UART6 77
+#define RST_BUS_UART7 78
+
+#endif /* _DT_BINDINGS_RST_SUN8I_R40_H_ */
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 5/9] ARM: dts: sun8i: add DTSI file for R40 SoC
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 17:37 ` Icenowy Zheng
-1 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
R40 is a new SoC by Allwinner, with peripherals as rich as A20, and quad
core Cortex-A7.
Add a DTSI file for it.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 404 +++++++++++++++++++++++++++++++++++++++
1 file changed, 404 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-r40.dtsi
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
new file mode 100644
index 000000000000..df48c87237f3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -0,0 +1,404 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
+ * Copyright 2017 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ };
+
+ chosen {
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ osc32k: osc32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x80000000>;
+ };
+
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ nmi_intc: interrupt-controller@01c00030 {
+ compatible = "allwinner,sun7i-a20-sc-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01c00030 0x0c>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mmc0: mmc@1c0f000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@1c10000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@1c11000 {
+ compatible = "allwinner,sun50i-a64-emmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <200000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc3: mmc@1c12000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC3>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ccu: clock@01c20000 {
+ compatible = "allwinner,sun8i-r40-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,sun8i-r40-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ i2c0_pins: twi0@0 {
+ pins = "PB0", "PB1";
+ function = "i2c0";
+ };
+
+ mmc0_pins: mmc0@0 {
+ pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc1_pins: mmc1@0 {
+ pins = "PG0", "PG1", "PG2",
+ "PG3", "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_pins: mmc2@0 {
+ pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12", "PC13", "PC14",
+ "PC15", "PC24";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ uart0_pins_0: uart0@0 {
+ pins = "PB22", "PB23";
+ function = "uart0";
+ };
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@01c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
+ uart5: serial@01c29400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29400 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART5>;
+ resets = <&ccu RST_BUS_UART5>;
+ status = "disabled";
+ };
+
+ uart6: serial@01c29800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29800 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART6>;
+ resets = <&ccu RST_BUS_UART6>;
+ status = "disabled";
+ };
+
+ uart7: serial@01c29c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29c00 0x400>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART7>;
+ resets = <&ccu RST_BUS_UART7>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@01c2b800 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b800 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c4: i2c@01c2c000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2c000 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C4>;
+ resets = <&ccu RST_BUS_I2C4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+};
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 5/9] ARM: dts: sun8i: add DTSI file for R40 SoC
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
R40 is a new SoC by Allwinner, with peripherals as rich as A20, and quad
core Cortex-A7.
Add a DTSI file for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 404 +++++++++++++++++++++++++++++++++++++++
1 file changed, 404 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-r40.dtsi
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
new file mode 100644
index 000000000000..df48c87237f3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -0,0 +1,404 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ };
+
+ chosen {
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ osc32k: osc32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x80000000>;
+ };
+
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ nmi_intc: interrupt-controller@01c00030 {
+ compatible = "allwinner,sun7i-a20-sc-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01c00030 0x0c>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mmc0: mmc@1c0f000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@1c10000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@1c11000 {
+ compatible = "allwinner,sun50i-a64-emmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <200000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc3: mmc@1c12000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC3>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ccu: clock@01c20000 {
+ compatible = "allwinner,sun8i-r40-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,sun8i-r40-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ i2c0_pins: twi0@0 {
+ pins = "PB0", "PB1";
+ function = "i2c0";
+ };
+
+ mmc0_pins: mmc0@0 {
+ pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc1_pins: mmc1@0 {
+ pins = "PG0", "PG1", "PG2",
+ "PG3", "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_pins: mmc2@0 {
+ pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12", "PC13", "PC14",
+ "PC15", "PC24";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ uart0_pins_0: uart0@0 {
+ pins = "PB22", "PB23";
+ function = "uart0";
+ };
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@01c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
+ uart5: serial@01c29400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29400 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART5>;
+ resets = <&ccu RST_BUS_UART5>;
+ status = "disabled";
+ };
+
+ uart6: serial@01c29800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29800 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART6>;
+ resets = <&ccu RST_BUS_UART6>;
+ status = "disabled";
+ };
+
+ uart7: serial@01c29c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29c00 0x400>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART7>;
+ resets = <&ccu RST_BUS_UART7>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@01c2b800 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b800 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c4: i2c@01c2c000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2c000 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C4>;
+ resets = <&ccu RST_BUS_I2C4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+};
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 5/9] ARM: dts: sun8i: add DTSI file for R40 SoC
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
R40 is a new SoC by Allwinner, with peripherals as rich as A20, and quad
core Cortex-A7.
Add a DTSI file for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 404 +++++++++++++++++++++++++++++++++++++++
1 file changed, 404 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-r40.dtsi
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
new file mode 100644
index 000000000000..df48c87237f3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -0,0 +1,404 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ };
+
+ chosen {
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ osc32k: osc32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu at 1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu at 2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x80000000>;
+ };
+
+ soc at 01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ nmi_intc: interrupt-controller at 01c00030 {
+ compatible = "allwinner,sun7i-a20-sc-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01c00030 0x0c>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mmc0: mmc at 1c0f000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc at 1c10000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc at 1c11000 {
+ compatible = "allwinner,sun50i-a64-emmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <200000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc3: mmc at 1c12000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC3>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <150000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ccu: clock at 01c20000 {
+ compatible = "allwinner,sun8i-r40-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl at 01c20800 {
+ compatible = "allwinner,sun8i-r40-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ i2c0_pins: twi0 at 0 {
+ pins = "PB0", "PB1";
+ function = "i2c0";
+ };
+
+ mmc0_pins: mmc0 at 0 {
+ pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc1_pins: mmc1 at 0 {
+ pins = "PG0", "PG1", "PG2",
+ "PG3", "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_pins: mmc2 at 0 {
+ pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12", "PC13", "PC14",
+ "PC15", "PC24";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ uart0_pins_0: uart0 at 0 {
+ pins = "PB22", "PB23";
+ function = "uart0";
+ };
+ };
+
+ uart0: serial at 01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial at 01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial at 01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial at 01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial at 01c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
+ uart5: serial at 01c29400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29400 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART5>;
+ resets = <&ccu RST_BUS_UART5>;
+ status = "disabled";
+ };
+
+ uart6: serial at 01c29800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29800 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART6>;
+ resets = <&ccu RST_BUS_UART6>;
+ status = "disabled";
+ };
+
+ uart7: serial at 01c29c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29c00 0x400>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART7>;
+ resets = <&ccu RST_BUS_UART7>;
+ status = "disabled";
+ };
+
+ i2c0: i2c at 01c2ac00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c at 01c2b000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c at 01c2b400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c at 01c2b800 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b800 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c4: i2c at 01c2c000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2c000 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C4>;
+ resets = <&ccu RST_BUS_I2C4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gic: interrupt-controller at 01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+};
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 6/9] ARM: dts: sun8i: add DTS file for Banana Pi M2 Ultra
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 17:37 ` Icenowy Zheng
-1 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
Banana Pi M2 Ultra is a new board by Sinovoip (BPi), with R40 SoC,
AXP221 PMIC, 2GiB DRAM, 8GiB eMMC, a 40-pin RPi-like GPIO connector, a
HDMI connector, a SATA connector (native in SoC) as well as its power
supply, a Headphone jack, two USB ports, a 1000Mbps Ethernet port
(with RTL8211E PHY), a MicroSD slot, a battery connector, a DSI
connector and a CSI connector.
Add support for the board.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 161 ++++++++++++++++++++++
2 files changed, 162 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 011808490fed..29367442cda4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -876,6 +876,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-r16-parrot.dtb \
+ sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 000000000000..1d824830a1ad
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Banana Pi BPI-M2-Ultra";
+ compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp22x: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-sys";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+®_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dldo2>;
+ vqmmc-supply = <®_dldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_0>;
+ status = "okay";
+};
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 6/9] ARM: dts: sun8i: add DTS file for Banana Pi M2 Ultra
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
Banana Pi M2 Ultra is a new board by Sinovoip (BPi), with R40 SoC,
AXP221 PMIC, 2GiB DRAM, 8GiB eMMC, a 40-pin RPi-like GPIO connector, a
HDMI connector, a SATA connector (native in SoC) as well as its power
supply, a Headphone jack, two USB ports, a 1000Mbps Ethernet port
(with RTL8211E PHY), a MicroSD slot, a battery connector, a DSI
connector and a CSI connector.
Add support for the board.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 161 ++++++++++++++++++++++
2 files changed, 162 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 011808490fed..29367442cda4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -876,6 +876,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-r16-parrot.dtb \
+ sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 000000000000..1d824830a1ad
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Banana Pi BPI-M2-Ultra";
+ compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp22x: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-sys";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+®_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dldo2>;
+ vqmmc-supply = <®_dldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_0>;
+ status = "okay";
+};
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 6/9] ARM: dts: sun8i: add DTS file for Banana Pi M2 Ultra
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
Banana Pi M2 Ultra is a new board by Sinovoip (BPi), with R40 SoC,
AXP221 PMIC, 2GiB DRAM, 8GiB eMMC, a 40-pin RPi-like GPIO connector, a
HDMI connector, a SATA connector (native in SoC) as well as its power
supply, a Headphone jack, two USB ports, a 1000Mbps Ethernet port
(with RTL8211E PHY), a MicroSD slot, a battery connector, a DSI
connector and a CSI connector.
Add support for the board.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 161 ++++++++++++++++++++++
2 files changed, 162 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 011808490fed..29367442cda4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -876,6 +876,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-r16-parrot.dtb \
+ sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 000000000000..1d824830a1ad
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Banana Pi BPI-M2-Ultra";
+ compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp22x: pmic at 68 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-sys";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+®_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dldo2>;
+ vqmmc-supply = <®_dldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_0>;
+ status = "okay";
+};
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 7/9] phy: sun4i-usb: add support for R40 USB PHY
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 17:37 ` Icenowy Zheng
-1 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
Allwinner R40 features a USB PHY like the one in A64, but with 3 ports.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
drivers/phy/phy-sun4i-usb.c | 17 +++++++++++++----
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index e42334258185..184a1d7af352 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -11,6 +11,7 @@ Required properties:
* allwinner,sun8i-a33-usb-phy
* allwinner,sun8i-h3-usb-phy
* allwinner,sun8i-v3s-usb-phy
+ * allwinner,sun8i-r40-usb-phy
* allwinner,sun50i-a64-usb-phy
- reg : a list of offset + length pairs
- reg-names :
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index a21b5f24a340..3c6ddd6750dd 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -100,6 +100,7 @@ enum sun4i_usb_phy_type {
sun8i_a33_phy,
sun8i_h3_phy,
sun8i_v3s_phy,
+ sun8i_r40_phy,
sun50i_a64_phy,
};
@@ -188,10 +189,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
spin_lock_irqsave(&phy_data->reg_lock, flags);
- if (phy_data->cfg->type == sun8i_a33_phy ||
- phy_data->cfg->type == sun50i_a64_phy ||
- phy_data->cfg->type == sun8i_v3s_phy) {
- /* A33 or A64 needs us to set phyctl to 0 explicitly */
+ if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
+ /* A33-style phyctl register needs to be set to 0 explicitly */
writel(0, phyctl);
}
@@ -845,6 +844,15 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.enable_pmu_unk1 = true,
};
+static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
+ .num_phys = 3,
+ .type = sun8i_r40_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
+};
+
static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -854,6 +862,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
+ { .compatible = "allwinner,sun8i-r40-usb-phy", .data = &sun8i_r40_cfg },
{ .compatible = "allwinner,sun50i-a64-usb-phy",
.data = &sun50i_a64_cfg},
{ },
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 7/9] phy: sun4i-usb: add support for R40 USB PHY
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
Allwinner R40 features a USB PHY like the one in A64, but with 3 ports.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
drivers/phy/phy-sun4i-usb.c | 17 +++++++++++++----
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index e42334258185..184a1d7af352 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -11,6 +11,7 @@ Required properties:
* allwinner,sun8i-a33-usb-phy
* allwinner,sun8i-h3-usb-phy
* allwinner,sun8i-v3s-usb-phy
+ * allwinner,sun8i-r40-usb-phy
* allwinner,sun50i-a64-usb-phy
- reg : a list of offset + length pairs
- reg-names :
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index a21b5f24a340..3c6ddd6750dd 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -100,6 +100,7 @@ enum sun4i_usb_phy_type {
sun8i_a33_phy,
sun8i_h3_phy,
sun8i_v3s_phy,
+ sun8i_r40_phy,
sun50i_a64_phy,
};
@@ -188,10 +189,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
spin_lock_irqsave(&phy_data->reg_lock, flags);
- if (phy_data->cfg->type == sun8i_a33_phy ||
- phy_data->cfg->type == sun50i_a64_phy ||
- phy_data->cfg->type == sun8i_v3s_phy) {
- /* A33 or A64 needs us to set phyctl to 0 explicitly */
+ if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
+ /* A33-style phyctl register needs to be set to 0 explicitly */
writel(0, phyctl);
}
@@ -845,6 +844,15 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.enable_pmu_unk1 = true,
};
+static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
+ .num_phys = 3,
+ .type = sun8i_r40_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
+};
+
static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -854,6 +862,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
+ { .compatible = "allwinner,sun8i-r40-usb-phy", .data = &sun8i_r40_cfg },
{ .compatible = "allwinner,sun50i-a64-usb-phy",
.data = &sun50i_a64_cfg},
{ },
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [PATCH 7/9] phy: sun4i-usb: add support for R40 USB PHY
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
Allwinner R40 features a USB PHY like the one in A64, but with 3 ports.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
drivers/phy/phy-sun4i-usb.c | 17 +++++++++++++----
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index e42334258185..184a1d7af352 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -11,6 +11,7 @@ Required properties:
* allwinner,sun8i-a33-usb-phy
* allwinner,sun8i-h3-usb-phy
* allwinner,sun8i-v3s-usb-phy
+ * allwinner,sun8i-r40-usb-phy
* allwinner,sun50i-a64-usb-phy
- reg : a list of offset + length pairs
- reg-names :
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index a21b5f24a340..3c6ddd6750dd 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -100,6 +100,7 @@ enum sun4i_usb_phy_type {
sun8i_a33_phy,
sun8i_h3_phy,
sun8i_v3s_phy,
+ sun8i_r40_phy,
sun50i_a64_phy,
};
@@ -188,10 +189,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
spin_lock_irqsave(&phy_data->reg_lock, flags);
- if (phy_data->cfg->type == sun8i_a33_phy ||
- phy_data->cfg->type == sun50i_a64_phy ||
- phy_data->cfg->type == sun8i_v3s_phy) {
- /* A33 or A64 needs us to set phyctl to 0 explicitly */
+ if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
+ /* A33-style phyctl register needs to be set to 0 explicitly */
writel(0, phyctl);
}
@@ -845,6 +844,15 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.enable_pmu_unk1 = true,
};
+static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
+ .num_phys = 3,
+ .type = sun8i_r40_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
+};
+
static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -854,6 +862,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
+ { .compatible = "allwinner,sun8i-r40-usb-phy", .data = &sun8i_r40_cfg },
{ .compatible = "allwinner,sun50i-a64-usb-phy",
.data = &sun50i_a64_cfg},
{ },
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 8/9] ARM: dts: sun8i: add USB nodes for R40
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 17:37 ` Icenowy Zheng
-1 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
Allwinner R40 SoC features a USB OTG port and two USB HOST ports.
Add support for the ports in the DTSI file.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 89 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index df48c87237f3..052badc2dd3c 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -179,6 +179,95 @@
#size-cells = <0>;
};
+ usb_otg: usb@01c13000 {
+ compatible = "allwinner,sun8i-a33-musb";
+ reg = <0x01c13000 0x0400>;
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
+
+ usbphy: phy@01c13400 {
+ compatible = "allwinner,sun8i-r40-usb-phy";
+ reg = <0x01c13400 0x14>,
+ <0x01c19800 0x4>,
+ <0x01c1c800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu1",
+ "pmu2";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci1: usb@01c19000 {
+ compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+ reg = <0x01c19000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_BUS_EHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>,
+ <&ccu RST_BUS_EHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@01c19400 {
+ compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+ reg = <0x01c19400 0x100>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci2: usb@01c1c000 {
+ compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+ reg = <0x01c1c000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_BUS_EHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_OHCI2>,
+ <&ccu RST_BUS_EHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@01c1c400 {
+ compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
ccu: clock@01c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 8/9] ARM: dts: sun8i: add USB nodes for R40
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
Allwinner R40 SoC features a USB OTG port and two USB HOST ports.
Add support for the ports in the DTSI file.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 89 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index df48c87237f3..052badc2dd3c 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -179,6 +179,95 @@
#size-cells = <0>;
};
+ usb_otg: usb@01c13000 {
+ compatible = "allwinner,sun8i-a33-musb";
+ reg = <0x01c13000 0x0400>;
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
+
+ usbphy: phy@01c13400 {
+ compatible = "allwinner,sun8i-r40-usb-phy";
+ reg = <0x01c13400 0x14>,
+ <0x01c19800 0x4>,
+ <0x01c1c800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu1",
+ "pmu2";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci1: usb@01c19000 {
+ compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+ reg = <0x01c19000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_BUS_EHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>,
+ <&ccu RST_BUS_EHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@01c19400 {
+ compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+ reg = <0x01c19400 0x100>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci2: usb@01c1c000 {
+ compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+ reg = <0x01c1c000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_BUS_EHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_OHCI2>,
+ <&ccu RST_BUS_EHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@01c1c400 {
+ compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
ccu: clock@01c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 8/9] ARM: dts: sun8i: add USB nodes for R40
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
Allwinner R40 SoC features a USB OTG port and two USB HOST ports.
Add support for the ports in the DTSI file.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 89 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index df48c87237f3..052badc2dd3c 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -179,6 +179,95 @@
#size-cells = <0>;
};
+ usb_otg: usb at 01c13000 {
+ compatible = "allwinner,sun8i-a33-musb";
+ reg = <0x01c13000 0x0400>;
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
+
+ usbphy: phy at 01c13400 {
+ compatible = "allwinner,sun8i-r40-usb-phy";
+ reg = <0x01c13400 0x14>,
+ <0x01c19800 0x4>,
+ <0x01c1c800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu1",
+ "pmu2";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci1: usb at 01c19000 {
+ compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+ reg = <0x01c19000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_BUS_EHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>,
+ <&ccu RST_BUS_EHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb at 01c19400 {
+ compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+ reg = <0x01c19400 0x100>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci2: usb at 01c1c000 {
+ compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+ reg = <0x01c1c000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_BUS_EHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_OHCI2>,
+ <&ccu RST_BUS_EHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb at 01c1c400 {
+ compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
ccu: clock at 01c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 9/9] ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 17:37 ` Icenowy Zheng
-1 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng
Banana Pi M2 Ultra board features two USB host ports, connected to the
two USB host ports on the SoC.
Add support for them.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 1d824830a1ad..672fb7f0f393 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -63,6 +63,14 @@
};
};
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -154,8 +162,23 @@
status = "okay";
};
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_0>;
status = "okay";
};
+
+&usbphy {
+ pinctrl-names = "default";
+ usb1_vbus-supply = <®_vcc5v0>;
+ usb2_vbus-supply = <®_vcc5v0>;
+ status = "okay";
+};
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 9/9] ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel, Icenowy Zheng
Banana Pi M2 Ultra board features two USB host ports, connected to the
two USB host ports on the SoC.
Add support for them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 1d824830a1ad..672fb7f0f393 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -63,6 +63,14 @@
};
};
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -154,8 +162,23 @@
status = "okay";
};
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_0>;
status = "okay";
};
+
+&usbphy {
+ pinctrl-names = "default";
+ usb1_vbus-supply = <®_vcc5v0>;
+ usb2_vbus-supply = <®_vcc5v0>;
+ status = "okay";
+};
--
2.11.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 51+ messages in thread
* [RFC PATCH 9/9] ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra
@ 2017-02-17 17:37 ` Icenowy Zheng
0 siblings, 0 replies; 51+ messages in thread
From: Icenowy Zheng @ 2017-02-17 17:37 UTC (permalink / raw)
To: linux-arm-kernel
Banana Pi M2 Ultra board features two USB host ports, connected to the
two USB host ports on the SoC.
Add support for them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 1d824830a1ad..672fb7f0f393 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -63,6 +63,14 @@
};
};
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -154,8 +162,23 @@
status = "okay";
};
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_0>;
status = "okay";
};
+
+&usbphy {
+ pinctrl-names = "default";
+ usb1_vbus-supply = <®_vcc5v0>;
+ usb2_vbus-supply = <®_vcc5v0>;
+ status = "okay";
+};
--
2.11.1
^ permalink raw reply related [flat|nested] 51+ messages in thread
* Re: [RFC PATCH 5/9] ARM: dts: sun8i: add DTSI file for R40 SoC
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-17 22:17 ` André Przywara
-1 siblings, 0 replies; 51+ messages in thread
From: André Przywara @ 2017-02-17 22:17 UTC (permalink / raw)
To: icenowy-ymACFijhrKM, Maxime Ripard, Chen-Yu Tsai,
Kishon Vijay Abraham I, Linus Walleij
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
On 17/02/17 17:37, Icenowy Zheng wrote:
> R40 is a new SoC by Allwinner, with peripherals as rich as A20, and quad
> core Cortex-A7.
>
> Add a DTSI file for it.
>
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
> ---
> arch/arm/boot/dts/sun8i-r40.dtsi | 404 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 404 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-r40.dtsi
>
> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
> new file mode 100644
> index 000000000000..df48c87237f3
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> @@ -0,0 +1,404 @@
> +/*
> + * Copyright 2017 Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
> + * Copyright 2017 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/sun8i-r40-ccu.h>
> +#include <dt-bindings/reset/sun8i-r40-ccu.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + };
> +
> + chosen {
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + osc24M: osc24M {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + };
> +
> + osc32k: osc32k {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "osc32k";
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <0>;
> + };
> +
> + cpu@1 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <1>;
> + };
> +
> + cpu@2 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <2>;
> + };
> +
> + cpu@3 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <3>;
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x40000000 0x80000000>;
> + };
> +
> + soc@01c00000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + nmi_intc: interrupt-controller@01c00030 {
> + compatible = "allwinner,sun7i-a20-sc-nmi";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + reg = <0x01c00030 0x0c>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + mmc0: mmc@1c0f000 {
> + compatible = "allwinner,sun50i-a64-mmc";
Can you please add a SoC specific compatible in the first place?
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
Same for the others MMC controllers.
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC0>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <150000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc1: mmc@1c10000 {
> + compatible = "allwinner,sun50i-a64-mmc";
> + reg = <0x01c10000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC1>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <150000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc2: mmc@1c11000 {
> + compatible = "allwinner,sun50i-a64-emmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC2>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <200000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc3: mmc@1c12000 {
> + compatible = "allwinner,sun50i-a64-mmc";
> + reg = <0x01c12000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC3>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <150000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + ccu: clock@01c20000 {
> + compatible = "allwinner,sun8i-r40-ccu";
> + reg = <0x01c20000 0x400>;
> + clocks = <&osc24M>, <&osc32k>;
> + clock-names = "hosc", "losc";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + pio: pinctrl@01c20800 {
> + compatible = "allwinner,sun8i-r40-pinctrl";
> + reg = <0x01c20800 0x400>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
> + clock-names = "apb", "hosc", "losc";
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #gpio-cells = <3>;
> +
> + i2c0_pins: twi0@0 {
> + pins = "PB0", "PB1";
> + function = "i2c0";
> + };
> +
> + mmc0_pins: mmc0@0 {
> + pins = "PF0", "PF1", "PF2",
> + "PF3", "PF4", "PF5";
> + function = "mmc0";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + mmc1_pins: mmc1@0 {
> + pins = "PG0", "PG1", "PG2",
> + "PG3", "PG4", "PG5";
> + function = "mmc1";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + mmc2_pins: mmc2@0 {
> + pins = "PC5", "PC6", "PC7", "PC8", "PC9",
> + "PC10", "PC11", "PC12", "PC13", "PC14",
> + "PC15", "PC24";
> + function = "mmc2";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + uart0_pins_0: uart0@0 {
> + pins = "PB22", "PB23";
> + function = "uart0";
> + };
> + };
> +
> + uart0: serial@01c28000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28000 0x400>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART0>;
> + resets = <&ccu RST_BUS_UART0>;
> + status = "disabled";
> + };
> +
> + uart1: serial@01c28400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28400 0x400>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART1>;
> + resets = <&ccu RST_BUS_UART1>;
> + status = "disabled";
> + };
> +
> + uart2: serial@01c28800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28800 0x400>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART2>;
> + resets = <&ccu RST_BUS_UART2>;
> + status = "disabled";
> + };
> +
> + uart3: serial@01c28c00 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28c00 0x400>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART3>;
> + resets = <&ccu RST_BUS_UART3>;
> + status = "disabled";
> + };
> +
> + uart4: serial@01c29000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29000 0x400>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART4>;
> + resets = <&ccu RST_BUS_UART4>;
> + status = "disabled";
> + };
> +
> + uart5: serial@01c29400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29400 0x400>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART5>;
> + resets = <&ccu RST_BUS_UART5>;
> + status = "disabled";
> + };
> +
> + uart6: serial@01c29800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29800 0x400>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART6>;
> + resets = <&ccu RST_BUS_UART6>;
> + status = "disabled";
> + };
> +
> + uart7: serial@01c29c00 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29c00 0x400>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART7>;
> + resets = <&ccu RST_BUS_UART7>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c@01c2ac00 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2ac00 0x400>;
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C0>;
> + resets = <&ccu RST_BUS_I2C0>;
> + pinctrl-0 = <&i2c0_pins>;
> + pinctrl-names = "default";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c1: i2c@01c2b000 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b000 0x400>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C1>;
> + resets = <&ccu RST_BUS_I2C1>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c2: i2c@01c2b400 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b400 0x400>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C2>;
> + resets = <&ccu RST_BUS_I2C2>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c3: i2c@01c2b800 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b800 0x400>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C3>;
> + resets = <&ccu RST_BUS_I2C3>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c4: i2c@01c2c000 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2c000 0x400>;
> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C4>;
> + resets = <&ccu RST_BUS_I2C4>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + gic: interrupt-controller@01c81000 {
> + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
I wonder if we should use the opportunity to change this to something
more sensible, possibly:
compatible = "arm,gic-400", "arm,cortex-a7-gic";
> + reg = <0x01c81000 0x1000>,
> + <0x01c82000 0x1000>,
This should be 8K in size.
And yes, this is wrong in many DTs:
https://www.spinics.net/lists/arm-kernel/msg555444.html
> + <0x01c84000 0x2000>,
> + <0x01c86000 0x2000>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + clock-frequency = <24000000>;
This should not be here:
http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/arm/arch_timer.txt#L20
> + arm,cpu-registers-not-fw-configured;
Do we actually need this?
Thanks,
Andre
> + };
> +};
>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [linux-sunxi] [RFC PATCH 5/9] ARM: dts: sun8i: add DTSI file for R40 SoC
@ 2017-02-17 22:17 ` André Przywara
0 siblings, 0 replies; 51+ messages in thread
From: André Przywara @ 2017-02-17 22:17 UTC (permalink / raw)
To: icenowy, Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I,
Linus Walleij
Cc: linux-gpio, linux-sunxi, linux-clk, linux-arm-kernel
On 17/02/17 17:37, Icenowy Zheng wrote:
> R40 is a new SoC by Allwinner, with peripherals as rich as A20, and quad
> core Cortex-A7.
>
> Add a DTSI file for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
> arch/arm/boot/dts/sun8i-r40.dtsi | 404 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 404 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-r40.dtsi
>
> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
> new file mode 100644
> index 000000000000..df48c87237f3
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> @@ -0,0 +1,404 @@
> +/*
> + * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
> + * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/sun8i-r40-ccu.h>
> +#include <dt-bindings/reset/sun8i-r40-ccu.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + };
> +
> + chosen {
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + osc24M: osc24M {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + };
> +
> + osc32k: osc32k {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "osc32k";
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <0>;
> + };
> +
> + cpu@1 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <1>;
> + };
> +
> + cpu@2 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <2>;
> + };
> +
> + cpu@3 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <3>;
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x40000000 0x80000000>;
> + };
> +
> + soc@01c00000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + nmi_intc: interrupt-controller@01c00030 {
> + compatible = "allwinner,sun7i-a20-sc-nmi";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + reg = <0x01c00030 0x0c>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + mmc0: mmc@1c0f000 {
> + compatible = "allwinner,sun50i-a64-mmc";
Can you please add a SoC specific compatible in the first place?
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
Same for the others MMC controllers.
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC0>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <150000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc1: mmc@1c10000 {
> + compatible = "allwinner,sun50i-a64-mmc";
> + reg = <0x01c10000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC1>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <150000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc2: mmc@1c11000 {
> + compatible = "allwinner,sun50i-a64-emmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC2>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <200000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc3: mmc@1c12000 {
> + compatible = "allwinner,sun50i-a64-mmc";
> + reg = <0x01c12000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC3>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <150000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + ccu: clock@01c20000 {
> + compatible = "allwinner,sun8i-r40-ccu";
> + reg = <0x01c20000 0x400>;
> + clocks = <&osc24M>, <&osc32k>;
> + clock-names = "hosc", "losc";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + pio: pinctrl@01c20800 {
> + compatible = "allwinner,sun8i-r40-pinctrl";
> + reg = <0x01c20800 0x400>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
> + clock-names = "apb", "hosc", "losc";
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #gpio-cells = <3>;
> +
> + i2c0_pins: twi0@0 {
> + pins = "PB0", "PB1";
> + function = "i2c0";
> + };
> +
> + mmc0_pins: mmc0@0 {
> + pins = "PF0", "PF1", "PF2",
> + "PF3", "PF4", "PF5";
> + function = "mmc0";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + mmc1_pins: mmc1@0 {
> + pins = "PG0", "PG1", "PG2",
> + "PG3", "PG4", "PG5";
> + function = "mmc1";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + mmc2_pins: mmc2@0 {
> + pins = "PC5", "PC6", "PC7", "PC8", "PC9",
> + "PC10", "PC11", "PC12", "PC13", "PC14",
> + "PC15", "PC24";
> + function = "mmc2";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + uart0_pins_0: uart0@0 {
> + pins = "PB22", "PB23";
> + function = "uart0";
> + };
> + };
> +
> + uart0: serial@01c28000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28000 0x400>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART0>;
> + resets = <&ccu RST_BUS_UART0>;
> + status = "disabled";
> + };
> +
> + uart1: serial@01c28400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28400 0x400>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART1>;
> + resets = <&ccu RST_BUS_UART1>;
> + status = "disabled";
> + };
> +
> + uart2: serial@01c28800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28800 0x400>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART2>;
> + resets = <&ccu RST_BUS_UART2>;
> + status = "disabled";
> + };
> +
> + uart3: serial@01c28c00 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28c00 0x400>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART3>;
> + resets = <&ccu RST_BUS_UART3>;
> + status = "disabled";
> + };
> +
> + uart4: serial@01c29000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29000 0x400>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART4>;
> + resets = <&ccu RST_BUS_UART4>;
> + status = "disabled";
> + };
> +
> + uart5: serial@01c29400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29400 0x400>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART5>;
> + resets = <&ccu RST_BUS_UART5>;
> + status = "disabled";
> + };
> +
> + uart6: serial@01c29800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29800 0x400>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART6>;
> + resets = <&ccu RST_BUS_UART6>;
> + status = "disabled";
> + };
> +
> + uart7: serial@01c29c00 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29c00 0x400>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART7>;
> + resets = <&ccu RST_BUS_UART7>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c@01c2ac00 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2ac00 0x400>;
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C0>;
> + resets = <&ccu RST_BUS_I2C0>;
> + pinctrl-0 = <&i2c0_pins>;
> + pinctrl-names = "default";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c1: i2c@01c2b000 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b000 0x400>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C1>;
> + resets = <&ccu RST_BUS_I2C1>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c2: i2c@01c2b400 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b400 0x400>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C2>;
> + resets = <&ccu RST_BUS_I2C2>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c3: i2c@01c2b800 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b800 0x400>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C3>;
> + resets = <&ccu RST_BUS_I2C3>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c4: i2c@01c2c000 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2c000 0x400>;
> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C4>;
> + resets = <&ccu RST_BUS_I2C4>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + gic: interrupt-controller@01c81000 {
> + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
I wonder if we should use the opportunity to change this to something
more sensible, possibly:
compatible = "arm,gic-400", "arm,cortex-a7-gic";
> + reg = <0x01c81000 0x1000>,
> + <0x01c82000 0x1000>,
This should be 8K in size.
And yes, this is wrong in many DTs:
https://www.spinics.net/lists/arm-kernel/msg555444.html
> + <0x01c84000 0x2000>,
> + <0x01c86000 0x2000>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + clock-frequency = <24000000>;
This should not be here:
http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/arm/arch_timer.txt#L20
> + arm,cpu-registers-not-fw-configured;
Do we actually need this?
Thanks,
Andre
> + };
> +};
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 51+ messages in thread
* [linux-sunxi] [RFC PATCH 5/9] ARM: dts: sun8i: add DTSI file for R40 SoC
@ 2017-02-17 22:17 ` André Przywara
0 siblings, 0 replies; 51+ messages in thread
From: André Przywara @ 2017-02-17 22:17 UTC (permalink / raw)
To: linux-arm-kernel
On 17/02/17 17:37, Icenowy Zheng wrote:
> R40 is a new SoC by Allwinner, with peripherals as rich as A20, and quad
> core Cortex-A7.
>
> Add a DTSI file for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
> arch/arm/boot/dts/sun8i-r40.dtsi | 404 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 404 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-r40.dtsi
>
> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
> new file mode 100644
> index 000000000000..df48c87237f3
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> @@ -0,0 +1,404 @@
> +/*
> + * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
> + * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/sun8i-r40-ccu.h>
> +#include <dt-bindings/reset/sun8i-r40-ccu.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + };
> +
> + chosen {
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + osc24M: osc24M {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + };
> +
> + osc32k: osc32k {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "osc32k";
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <0>;
> + };
> +
> + cpu at 1 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <1>;
> + };
> +
> + cpu at 2 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <2>;
> + };
> +
> + cpu at 3 {
> + compatible = "arm,cortex-a7";
> + device_type = "cpu";
> + reg = <3>;
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x40000000 0x80000000>;
> + };
> +
> + soc at 01c00000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + nmi_intc: interrupt-controller at 01c00030 {
> + compatible = "allwinner,sun7i-a20-sc-nmi";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + reg = <0x01c00030 0x0c>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + mmc0: mmc at 1c0f000 {
> + compatible = "allwinner,sun50i-a64-mmc";
Can you please add a SoC specific compatible in the first place?
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
Same for the others MMC controllers.
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC0>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <150000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc1: mmc at 1c10000 {
> + compatible = "allwinner,sun50i-a64-mmc";
> + reg = <0x01c10000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC1>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <150000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc2: mmc at 1c11000 {
> + compatible = "allwinner,sun50i-a64-emmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC2>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <200000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc3: mmc at 1c12000 {
> + compatible = "allwinner,sun50i-a64-mmc";
> + reg = <0x01c12000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
> + clock-names = "ahb", "mmc";
> + resets = <&ccu RST_BUS_MMC3>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + max-frequency = <150000000>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + ccu: clock at 01c20000 {
> + compatible = "allwinner,sun8i-r40-ccu";
> + reg = <0x01c20000 0x400>;
> + clocks = <&osc24M>, <&osc32k>;
> + clock-names = "hosc", "losc";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + pio: pinctrl at 01c20800 {
> + compatible = "allwinner,sun8i-r40-pinctrl";
> + reg = <0x01c20800 0x400>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
> + clock-names = "apb", "hosc", "losc";
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #gpio-cells = <3>;
> +
> + i2c0_pins: twi0 at 0 {
> + pins = "PB0", "PB1";
> + function = "i2c0";
> + };
> +
> + mmc0_pins: mmc0 at 0 {
> + pins = "PF0", "PF1", "PF2",
> + "PF3", "PF4", "PF5";
> + function = "mmc0";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + mmc1_pins: mmc1 at 0 {
> + pins = "PG0", "PG1", "PG2",
> + "PG3", "PG4", "PG5";
> + function = "mmc1";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + mmc2_pins: mmc2 at 0 {
> + pins = "PC5", "PC6", "PC7", "PC8", "PC9",
> + "PC10", "PC11", "PC12", "PC13", "PC14",
> + "PC15", "PC24";
> + function = "mmc2";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + uart0_pins_0: uart0 at 0 {
> + pins = "PB22", "PB23";
> + function = "uart0";
> + };
> + };
> +
> + uart0: serial at 01c28000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28000 0x400>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART0>;
> + resets = <&ccu RST_BUS_UART0>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 01c28400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28400 0x400>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART1>;
> + resets = <&ccu RST_BUS_UART1>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 01c28800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28800 0x400>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART2>;
> + resets = <&ccu RST_BUS_UART2>;
> + status = "disabled";
> + };
> +
> + uart3: serial at 01c28c00 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28c00 0x400>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART3>;
> + resets = <&ccu RST_BUS_UART3>;
> + status = "disabled";
> + };
> +
> + uart4: serial at 01c29000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29000 0x400>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART4>;
> + resets = <&ccu RST_BUS_UART4>;
> + status = "disabled";
> + };
> +
> + uart5: serial at 01c29400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29400 0x400>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART5>;
> + resets = <&ccu RST_BUS_UART5>;
> + status = "disabled";
> + };
> +
> + uart6: serial at 01c29800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29800 0x400>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART6>;
> + resets = <&ccu RST_BUS_UART6>;
> + status = "disabled";
> + };
> +
> + uart7: serial at 01c29c00 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29c00 0x400>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART7>;
> + resets = <&ccu RST_BUS_UART7>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c at 01c2ac00 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2ac00 0x400>;
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C0>;
> + resets = <&ccu RST_BUS_I2C0>;
> + pinctrl-0 = <&i2c0_pins>;
> + pinctrl-names = "default";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c1: i2c at 01c2b000 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b000 0x400>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C1>;
> + resets = <&ccu RST_BUS_I2C1>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c2: i2c at 01c2b400 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b400 0x400>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C2>;
> + resets = <&ccu RST_BUS_I2C2>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c3: i2c at 01c2b800 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2b800 0x400>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C3>;
> + resets = <&ccu RST_BUS_I2C3>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c4: i2c at 01c2c000 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x01c2c000 0x400>;
> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C4>;
> + resets = <&ccu RST_BUS_I2C4>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + gic: interrupt-controller at 01c81000 {
> + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
I wonder if we should use the opportunity to change this to something
more sensible, possibly:
compatible = "arm,gic-400", "arm,cortex-a7-gic";
> + reg = <0x01c81000 0x1000>,
> + <0x01c82000 0x1000>,
This should be 8K in size.
And yes, this is wrong in many DTs:
https://www.spinics.net/lists/arm-kernel/msg555444.html
> + <0x01c84000 0x2000>,
> + <0x01c86000 0x2000>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + clock-frequency = <24000000>;
This should not be here:
http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/arm/arch_timer.txt#L20
> + arm,cpu-registers-not-fw-configured;
Do we actually need this?
Thanks,
Andre
> + };
> +};
>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH 2/9] pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-21 22:53 ` Maxime Ripard
-1 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 22:53 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
[-- Attachment #1: Type: text/plain, Size: 641 bytes --]
Hi,
On Sat, Feb 18, 2017 at 01:37:15AM +0800, Icenowy Zheng wrote:
> The new R40 SoC come with a largely similar version of the pin
> controller in A20.
>
> Rename the driver, in order to extend it with R40 support.
>
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
I'm not too fond of renaming this. This is going to be renamed over
and over again, will break the configurations every time.
We're not doing that for the other drivers, I'm not sure why we would
need it specifically for the pinctrl drivers.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH 2/9] pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40
@ 2017-02-21 22:53 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 22:53 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Linus Walleij, linux-sunxi, Kishon Vijay Abraham I, linux-gpio,
Chen-Yu Tsai, linux-clk, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 644 bytes --]
Hi,
On Sat, Feb 18, 2017 at 01:37:15AM +0800, Icenowy Zheng wrote:
> The new R40 SoC come with a largely similar version of the pin
> controller in A20.
>
> Rename the driver, in order to extend it with R40 support.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
I'm not too fond of renaming this. This is going to be renamed over
and over again, will break the configurations every time.
We're not doing that for the other drivers, I'm not sure why we would
need it specifically for the pinctrl drivers.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 2/9] pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40
@ 2017-02-21 22:53 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 22:53 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Sat, Feb 18, 2017 at 01:37:15AM +0800, Icenowy Zheng wrote:
> The new R40 SoC come with a largely similar version of the pin
> controller in A20.
>
> Rename the driver, in order to extend it with R40 support.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
I'm not too fond of renaming this. This is going to be renamed over
and over again, will break the configurations every time.
We're not doing that for the other drivers, I'm not sure why we would
need it specifically for the pinctrl drivers.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170221/51ebde1e/attachment.sig>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH 3/9] pinctrl: sunxi: add support for R40 pinctrl
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-21 23:02 ` Maxime Ripard
-1 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:02 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
[-- Attachment #1: Type: text/plain, Size: 567 bytes --]
On Sat, Feb 18, 2017 at 01:37:16AM +0800, Icenowy Zheng wrote:
> Allwinner R40 have a pin controller similar to A20, only added 8-bit
> eMMC function to mmc2 at PC bank.
>
> Add support for it in the already renamed sunxi-a20-r40 driver via
> variant framework.
>
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
I think a prerequisite would be to merge A10 as well (possibly even
the other way around: A20 and R40 into the A10 driver).
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH 3/9] pinctrl: sunxi: add support for R40 pinctrl
@ 2017-02-21 23:02 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:02 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Linus Walleij, linux-sunxi, Kishon Vijay Abraham I, linux-gpio,
Chen-Yu Tsai, linux-clk, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 566 bytes --]
On Sat, Feb 18, 2017 at 01:37:16AM +0800, Icenowy Zheng wrote:
> Allwinner R40 have a pin controller similar to A20, only added 8-bit
> eMMC function to mmc2 at PC bank.
>
> Add support for it in the already renamed sunxi-a20-r40 driver via
> variant framework.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
I think a prerequisite would be to merge A10 as well (possibly even
the other way around: A20 and R40 into the A10 driver).
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 3/9] pinctrl: sunxi: add support for R40 pinctrl
@ 2017-02-21 23:02 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:02 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Feb 18, 2017 at 01:37:16AM +0800, Icenowy Zheng wrote:
> Allwinner R40 have a pin controller similar to A20, only added 8-bit
> eMMC function to mmc2 at PC bank.
>
> Add support for it in the already renamed sunxi-a20-r40 driver via
> variant framework.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
I think a prerequisite would be to merge A10 as well (possibly even
the other way around: A20 and R40 into the A10 driver).
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170221/893391fb/attachment.sig>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [RFC PATCH 4/9] clk: sunxi-ng: support R40 SoC
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-21 23:03 ` Maxime Ripard
-1 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:03 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
[-- Attachment #1: Type: text/plain, Size: 525 bytes --]
Hi,
On Sat, Feb 18, 2017 at 01:37:17AM +0800, Icenowy Zheng wrote:
> Allwinner R40 SoC have a clock controller module in the style of the
> SoCs beyond sun6i, however, it's more rich and complex.
>
> Add support for it.
>
> As the user manual is still not available, this driver is made with
> knowledge from clk-sun8iw11.c in the BSP kernel source.
Missing SoB.
Why are some patches tagged as RFC and some don't?
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [RFC PATCH 4/9] clk: sunxi-ng: support R40 SoC
@ 2017-02-21 23:03 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:03 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Linus Walleij, linux-sunxi, Kishon Vijay Abraham I, linux-gpio,
Chen-Yu Tsai, linux-clk, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 547 bytes --]
Hi,
On Sat, Feb 18, 2017 at 01:37:17AM +0800, Icenowy Zheng wrote:
> Allwinner R40 SoC have a clock controller module in the style of the
> SoCs beyond sun6i, however, it's more rich and complex.
>
> Add support for it.
>
> As the user manual is still not available, this driver is made with
> knowledge from clk-sun8iw11.c in the BSP kernel source.
Missing SoB.
Why are some patches tagged as RFC and some don't?
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 51+ messages in thread
* [RFC PATCH 4/9] clk: sunxi-ng: support R40 SoC
@ 2017-02-21 23:03 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:03 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Sat, Feb 18, 2017 at 01:37:17AM +0800, Icenowy Zheng wrote:
> Allwinner R40 SoC have a clock controller module in the style of the
> SoCs beyond sun6i, however, it's more rich and complex.
>
> Add support for it.
>
> As the user manual is still not available, this driver is made with
> knowledge from clk-sun8iw11.c in the BSP kernel source.
Missing SoB.
Why are some patches tagged as RFC and some don't?
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170221/b1e5df21/attachment.sig>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [RFC PATCH 8/9] ARM: dts: sun8i: add USB nodes for R40
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-21 23:05 ` Maxime Ripard
-1 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:05 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
[-- Attachment #1: Type: text/plain, Size: 421 bytes --]
On Sat, Feb 18, 2017 at 01:37:21AM +0800, Icenowy Zheng wrote:
> Allwinner R40 SoC features a USB OTG port and two USB HOST ports.
>
> Add support for the ports in the DTSI file.
>
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
Can't this be merged into the patch adding the DTSI?
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [RFC PATCH 8/9] ARM: dts: sun8i: add USB nodes for R40
@ 2017-02-21 23:05 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:05 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Linus Walleij, linux-sunxi, Kishon Vijay Abraham I, linux-gpio,
Chen-Yu Tsai, linux-clk, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 418 bytes --]
On Sat, Feb 18, 2017 at 01:37:21AM +0800, Icenowy Zheng wrote:
> Allwinner R40 SoC features a USB OTG port and two USB HOST ports.
>
> Add support for the ports in the DTSI file.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Can't this be merged into the patch adding the DTSI?
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 51+ messages in thread
* [RFC PATCH 8/9] ARM: dts: sun8i: add USB nodes for R40
@ 2017-02-21 23:05 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:05 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Feb 18, 2017 at 01:37:21AM +0800, Icenowy Zheng wrote:
> Allwinner R40 SoC features a USB OTG port and two USB HOST ports.
>
> Add support for the ports in the DTSI file.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Can't this be merged into the patch adding the DTSI?
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170221/a9206e92/attachment-0001.sig>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [RFC PATCH 9/9] ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-21 23:05 ` Maxime Ripard
-1 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:05 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Chen-Yu Tsai, Kishon Vijay Abraham I, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
[-- Attachment #1: Type: text/plain, Size: 463 bytes --]
On Sat, Feb 18, 2017 at 01:37:22AM +0800, Icenowy Zheng wrote:
> Banana Pi M2 Ultra board features two USB host ports, connected to the
> two USB host ports on the SoC.
>
> Add support for them.
>
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
Same comment than for the DTSI. This should be merged with the rest of
the DTS' patch.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [RFC PATCH 9/9] ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra
@ 2017-02-21 23:05 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:05 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Linus Walleij, linux-sunxi, Kishon Vijay Abraham I, linux-gpio,
Chen-Yu Tsai, linux-clk, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 461 bytes --]
On Sat, Feb 18, 2017 at 01:37:22AM +0800, Icenowy Zheng wrote:
> Banana Pi M2 Ultra board features two USB host ports, connected to the
> two USB host ports on the SoC.
>
> Add support for them.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Same comment than for the DTSI. This should be merged with the rest of
the DTS' patch.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 51+ messages in thread
* [RFC PATCH 9/9] ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra
@ 2017-02-21 23:05 ` Maxime Ripard
0 siblings, 0 replies; 51+ messages in thread
From: Maxime Ripard @ 2017-02-21 23:05 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Feb 18, 2017 at 01:37:22AM +0800, Icenowy Zheng wrote:
> Banana Pi M2 Ultra board features two USB host ports, connected to the
> two USB host ports on the SoC.
>
> Add support for them.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Same comment than for the DTSI. This should be merged with the rest of
the DTS' patch.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170221/a2a4a32e/attachment.sig>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [RFC PATCH 0/9] Add support for Allwinner R40 SoC
2017-02-17 17:37 ` Icenowy Zheng
(?)
@ 2017-02-23 14:56 ` Linus Walleij
-1 siblings, 0 replies; 51+ messages in thread
From: Linus Walleij @ 2017-02-23 14:56 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Maxime Ripard, Chen-Yu Tsai, Kishon Vijay Abraham I,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA, linux-clk, linux-sunxi
On Fri, Feb 17, 2017 at 6:37 PM, Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org> wrote:
> This patchset is an experiment to add R40 support to mainline Linux.
>
> As we have still no user manual for R40, the patchset is developed
> by reading the BSP source code and device tree, educated guess and
> try and error.
Out of curiosity: does the board support use the mainline drivers
as starting point? I.e. does it build on top of the community work done
by Maxime & others?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [RFC PATCH 0/9] Add support for Allwinner R40 SoC
@ 2017-02-23 14:56 ` Linus Walleij
0 siblings, 0 replies; 51+ messages in thread
From: Linus Walleij @ 2017-02-23 14:56 UTC (permalink / raw)
To: Icenowy Zheng
Cc: linux-sunxi, Kishon Vijay Abraham I, linux-gpio, Chen-Yu Tsai,
Maxime Ripard, linux-clk, linux-arm-kernel
On Fri, Feb 17, 2017 at 6:37 PM, Icenowy Zheng <icenowy@aosc.xyz> wrote:
> This patchset is an experiment to add R40 support to mainline Linux.
>
> As we have still no user manual for R40, the patchset is developed
> by reading the BSP source code and device tree, educated guess and
> try and error.
Out of curiosity: does the board support use the mainline drivers
as starting point? I.e. does it build on top of the community work done
by Maxime & others?
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 51+ messages in thread
* [RFC PATCH 0/9] Add support for Allwinner R40 SoC
@ 2017-02-23 14:56 ` Linus Walleij
0 siblings, 0 replies; 51+ messages in thread
From: Linus Walleij @ 2017-02-23 14:56 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Feb 17, 2017 at 6:37 PM, Icenowy Zheng <icenowy@aosc.xyz> wrote:
> This patchset is an experiment to add R40 support to mainline Linux.
>
> As we have still no user manual for R40, the patchset is developed
> by reading the BSP source code and device tree, educated guess and
> try and error.
Out of curiosity: does the board support use the mainline drivers
as starting point? I.e. does it build on top of the community work done
by Maxime & others?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 51+ messages in thread
end of thread, other threads:[~2017-02-23 14:56 UTC | newest]
Thread overview: 51+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-17 17:37 [RFC PATCH 0/9] Add support for Allwinner R40 SoC Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
[not found] ` <20170217173722.6477-1-icenowy-ymACFijhrKM@public.gmane.org>
2017-02-17 17:37 ` [PATCH 1/9] arm: sunxi: add support for " Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` [PATCH 2/9] pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40 Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
[not found] ` <20170217173722.6477-3-icenowy-ymACFijhrKM@public.gmane.org>
2017-02-21 22:53 ` Maxime Ripard
2017-02-21 22:53 ` Maxime Ripard
2017-02-21 22:53 ` Maxime Ripard
2017-02-17 17:37 ` [PATCH 3/9] pinctrl: sunxi: add support for R40 pinctrl Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
[not found] ` <20170217173722.6477-4-icenowy-ymACFijhrKM@public.gmane.org>
2017-02-21 23:02 ` Maxime Ripard
2017-02-21 23:02 ` Maxime Ripard
2017-02-21 23:02 ` Maxime Ripard
2017-02-17 17:37 ` [RFC PATCH 4/9] clk: sunxi-ng: support R40 SoC Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
[not found] ` <20170217173722.6477-5-icenowy-ymACFijhrKM@public.gmane.org>
2017-02-21 23:03 ` Maxime Ripard
2017-02-21 23:03 ` Maxime Ripard
2017-02-21 23:03 ` Maxime Ripard
2017-02-17 17:37 ` [RFC PATCH 5/9] ARM: dts: sun8i: add DTSI file for " Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
[not found] ` <20170217173722.6477-6-icenowy-ymACFijhrKM@public.gmane.org>
2017-02-17 22:17 ` André Przywara
2017-02-17 22:17 ` [linux-sunxi] " André Przywara
2017-02-17 22:17 ` André Przywara
2017-02-17 17:37 ` [RFC PATCH 6/9] ARM: dts: sun8i: add DTS file for Banana Pi M2 Ultra Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` [PATCH 7/9] phy: sun4i-usb: add support for R40 USB PHY Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` [RFC PATCH 8/9] ARM: dts: sun8i: add USB nodes for R40 Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
[not found] ` <20170217173722.6477-9-icenowy-ymACFijhrKM@public.gmane.org>
2017-02-21 23:05 ` Maxime Ripard
2017-02-21 23:05 ` Maxime Ripard
2017-02-21 23:05 ` Maxime Ripard
2017-02-17 17:37 ` [RFC PATCH 9/9] ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
2017-02-17 17:37 ` Icenowy Zheng
[not found] ` <20170217173722.6477-10-icenowy-ymACFijhrKM@public.gmane.org>
2017-02-21 23:05 ` Maxime Ripard
2017-02-21 23:05 ` Maxime Ripard
2017-02-21 23:05 ` Maxime Ripard
2017-02-23 14:56 ` [RFC PATCH 0/9] Add support for Allwinner R40 SoC Linus Walleij
2017-02-23 14:56 ` Linus Walleij
2017-02-23 14:56 ` Linus Walleij
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.