* [PATCH] hwmon: (w83627ehf) Use request_muxed_region
@ 2017-02-20 4:50 Atsushi Nemoto
2017-02-21 15:42 ` Guenter Roeck
0 siblings, 1 reply; 3+ messages in thread
From: Atsushi Nemoto @ 2017-02-20 4:50 UTC (permalink / raw)
To: linux-hwmon; +Cc: Jean Delvare, Guenter Roeck, sato
From: Katsumi Sato <sato@toshiba-tops.co.jp>
Serialize access to the hardware by using "request_muxed_region".
Call to this macro will hold off the requestor if the resource is
currently busy. "superio_enter" will return an error if call to
"request_muxed_region" fails.
Signed-off-by: Katsumi Sato <sato@toshiba-tops.co.jp>
Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp>
---
drivers/hwmon/w83627ehf.c | 32 ++++++++++++++++++++++++++------
1 files changed, 26 insertions(+), 6 deletions(-)
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 697007a..40cb8fa 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -135,11 +135,16 @@ enum kinds {
outb(ld, ioreg + 1);
}
-static inline void
+static inline int
superio_enter(int ioreg)
{
+ if (!request_muxed_region(ioreg, 2, DRVNAME))
+ return -EBUSY;
+
outb(0x87, ioreg);
outb(0x87, ioreg);
+
+ return 0;
}
static inline void
@@ -148,6 +153,7 @@ enum kinds {
outb(0xaa, ioreg);
outb(0x02, ioreg);
outb(0x02, ioreg + 1);
+ release_region(ioreg, 2);
}
/*
@@ -1970,7 +1976,10 @@ static void w82627ehf_swap_tempreg(struct w83627ehf_data *data,
return;
}
- superio_enter(sio_data->sioreg);
+ if (superio_enter(sio_data->sioreg)) {
+ pr_err("%s: superio is busy!!\n", __func__);
+ return;
+ }
/* fan4 and fan5 share some pins with the GPIO and serial flash */
if (sio_data->kind == nct6775) {
@@ -2352,7 +2361,11 @@ static int w83627ehf_probe(struct platform_device *pdev)
w83627ehf_init_device(data, sio_data->kind);
data->vrm = vid_which_vrm();
- superio_enter(sio_data->sioreg);
+
+ err = superio_enter(sio_data->sioreg);
+ if (err)
+ goto exit_release;
+
/* Read VID value */
if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b ||
sio_data->kind == nct6775 || sio_data->kind == nct6776) {
@@ -2364,8 +2377,10 @@ static int w83627ehf_probe(struct platform_device *pdev)
superio_select(sio_data->sioreg, W83667HG_LD_VID);
data->vid = superio_inb(sio_data->sioreg, 0xe3);
err = device_create_file(dev, &dev_attr_cpu0_vid);
- if (err)
+ if (err) {
+ superio_exit(sio_data->sioreg);
goto exit_release;
+ }
} else if (sio_data->kind != w83627uhg) {
superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
@@ -2401,8 +2416,10 @@ static int w83627ehf_probe(struct platform_device *pdev)
data->vid &= 0x3f;
err = device_create_file(dev, &dev_attr_cpu0_vid);
- if (err)
+ if (err) {
+ superio_exit(sio_data->sioreg);
goto exit_release;
+ }
} else {
dev_info(dev,
"VID pins in output mode, CPU VID not available\n");
@@ -2712,8 +2729,11 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
u16 val;
const char *sio_name;
+ int err;
- superio_enter(sioaddr);
+ err = superio_enter(sioaddr);
+ if (err)
+ return err;
if (force_id)
val = force_id;
--
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] hwmon: (w83627ehf) Use request_muxed_region
2017-02-20 4:50 [PATCH] hwmon: (w83627ehf) Use request_muxed_region Atsushi Nemoto
@ 2017-02-21 15:42 ` Guenter Roeck
2017-02-22 4:26 ` Atsushi Nemoto
0 siblings, 1 reply; 3+ messages in thread
From: Guenter Roeck @ 2017-02-21 15:42 UTC (permalink / raw)
To: Atsushi Nemoto; +Cc: linux-hwmon, Jean Delvare, sato
On Mon, Feb 20, 2017 at 01:50:14PM +0900, Atsushi Nemoto wrote:
> From: Katsumi Sato <sato@toshiba-tops.co.jp>
>
> Serialize access to the hardware by using "request_muxed_region".
> Call to this macro will hold off the requestor if the resource is
> currently busy. "superio_enter" will return an error if call to
> "request_muxed_region" fails.
>
> Signed-off-by: Katsumi Sato <sato@toshiba-tops.co.jp>
> Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp>
> ---
> drivers/hwmon/w83627ehf.c | 32 ++++++++++++++++++++++++++------
> 1 files changed, 26 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
> index 697007a..40cb8fa 100644
> --- a/drivers/hwmon/w83627ehf.c
> +++ b/drivers/hwmon/w83627ehf.c
> @@ -135,11 +135,16 @@ enum kinds {
> outb(ld, ioreg + 1);
> }
>
> -static inline void
> +static inline int
> superio_enter(int ioreg)
> {
> + if (!request_muxed_region(ioreg, 2, DRVNAME))
> + return -EBUSY;
> +
> outb(0x87, ioreg);
> outb(0x87, ioreg);
> +
> + return 0;
> }
>
> static inline void
> @@ -148,6 +153,7 @@ enum kinds {
> outb(0xaa, ioreg);
> outb(0x02, ioreg);
> outb(0x02, ioreg + 1);
> + release_region(ioreg, 2);
> }
>
> /*
> @@ -1970,7 +1976,10 @@ static void w82627ehf_swap_tempreg(struct w83627ehf_data *data,
> return;
> }
>
> - superio_enter(sio_data->sioreg);
> + if (superio_enter(sio_data->sioreg)) {
> + pr_err("%s: superio is busy!!\n", __func__);
> + return;
> + }
This is not good. It effectively ignores the error and does not
initialize the chip's fan configuration. Displaying a log message
doesn't improve the situation.
The best solution here would probably be to remove superio_enter/exit
from this function and move the superio_exit() call in the calling code
after the call to w83627ehf_check_fan_inputs().
>
> /* fan4 and fan5 share some pins with the GPIO and serial flash */
> if (sio_data->kind == nct6775) {
> @@ -2352,7 +2361,11 @@ static int w83627ehf_probe(struct platform_device *pdev)
> w83627ehf_init_device(data, sio_data->kind);
>
> data->vrm = vid_which_vrm();
> - superio_enter(sio_data->sioreg);
> +
> + err = superio_enter(sio_data->sioreg);
> + if (err)
> + goto exit_release;
> +
> /* Read VID value */
> if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b ||
> sio_data->kind == nct6775 || sio_data->kind == nct6776) {
> @@ -2364,8 +2377,10 @@ static int w83627ehf_probe(struct platform_device *pdev)
> superio_select(sio_data->sioreg, W83667HG_LD_VID);
> data->vid = superio_inb(sio_data->sioreg, 0xe3);
> err = device_create_file(dev, &dev_attr_cpu0_vid);
> - if (err)
> + if (err) {
> + superio_exit(sio_data->sioreg);
> goto exit_release;
> + }
> } else if (sio_data->kind != w83627uhg) {
> superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
> if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
> @@ -2401,8 +2416,10 @@ static int w83627ehf_probe(struct platform_device *pdev)
> data->vid &= 0x3f;
>
> err = device_create_file(dev, &dev_attr_cpu0_vid);
> - if (err)
> + if (err) {
> + superio_exit(sio_data->sioreg);
> goto exit_release;
> + }
> } else {
> dev_info(dev,
> "VID pins in output mode, CPU VID not available\n");
> @@ -2712,8 +2729,11 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
>
> u16 val;
> const char *sio_name;
> + int err;
>
> - superio_enter(sioaddr);
> + err = superio_enter(sioaddr);
> + if (err)
> + return err;
>
> if (force_id)
> val = force_id;
> --
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] hwmon: (w83627ehf) Use request_muxed_region
2017-02-21 15:42 ` Guenter Roeck
@ 2017-02-22 4:26 ` Atsushi Nemoto
0 siblings, 0 replies; 3+ messages in thread
From: Atsushi Nemoto @ 2017-02-22 4:26 UTC (permalink / raw)
To: linux; +Cc: linux-hwmon, jdelvare, sato
On Tue, 21 Feb 2017 07:42:58 -0800, Guenter Roeck <linux@roeck-us.net> wrote:
>> - superio_enter(sio_data->sioreg);
>> + if (superio_enter(sio_data->sioreg)) {
>> + pr_err("%s: superio is busy!!\n", __func__);
>> + return;
>> + }
>
> This is not good. It effectively ignores the error and does not
> initialize the chip's fan configuration. Displaying a log message
> doesn't improve the situation.
>
> The best solution here would probably be to remove superio_enter/exit
> from this function and move the superio_exit() call in the calling code
> after the call to w83627ehf_check_fan_inputs().
Thank you. I agree with your solution. I will post an updated patch.
---
Atsushi Nemoto
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-02-22 4:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-20 4:50 [PATCH] hwmon: (w83627ehf) Use request_muxed_region Atsushi Nemoto
2017-02-21 15:42 ` Guenter Roeck
2017-02-22 4:26 ` Atsushi Nemoto
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.