On 02/21, Ye Xiaolong wrote: >On 02/20, Dou Liyang wrote: >>Currently, We make the mapping of "cpuid <-> nodeid" fixed at the booting time. >>It keeps consistent with the WorkQueue and avoids some bugs which may be caused >>by the dynamic assignment. >>As we know, It is implemented by the patches as follows: 2532fc318d, f7c28833c2, >>8f54969dc8, 8ad893faf2, dc6db24d24, which depend on ACPI table. Simply speaking: >> >>Step 1. Make the "Logical CPU ID <-> Processor ID/UID" fixed Using MADT: >>We generate the logical CPU IDs by the Local APIC/x2APIC IDs orderly and >>get the mapping of Processor ID/UID <-> Local Apic ID directly in MADT. >>So, we get the mapping of >>*Processor ID/UID <-> Local Apic ID <-> Logical CPU ID* >> >>Step 2. Make the "Processor ID/UID <-> Node ID(_PXM)" fixed Using DSDT: >>The maaping of "Processor ID/UID <-> Node ID(_PXM)" is ready-made in >>each entities. we just use it directly. >> >>So, at last we get the maaping of *Node ID <-> Logical CPU ID* according to >>step1 and step2: >>*Node ID(_PXM) <-> Processor ID/UID <-> Local Apic ID <-> Logical CPU ID* >> >>But, The ACPI table is unreliable and it is very risky that we use the entity >>which isn't related to a physical device at booting time. Here has already two >>bugs we found. >>1. Duplicated Processor IDs in DSDT. >> It has been fixed by commit 8e089eaa19, fd74da217d. >>2. The _PXM in DSDT is inconsistent with the one in MADT. >> It may cause the bug, which is shown in: >> https://lkml.org/lkml/2017/2/12/200 >>There may be more later. We shouldn't just only fix them everytime, we should >>solve this problem from the source to avoid such problems happend again and >>again. >> >>Now, a simple and easy way is found, we revert our patches. Do the Step 2 >>at hot-plug time, not at booting time where we did some useless work. >> >>It also can make the mapping of "cpuid <-> nodeid" fixed and avoid excessive >>use of the ACPI table. >> >>We have tested them in our box: Fujitsu PQ2000 with 2 nodes for hot-plug. >>To Xiaolong: >> Please help me to test it in the special machine. > >Got it, I'll queue the tests on the previous machine and let you know the result >once I get it. Previous kernel panic and incomplete run issue (described in [1]) in 0day system is gone with this series. Tested-by: Xiaolong Ye Here is the comparison: $ compare -at dc6db24d2476cd09c0ecf2b8d80313539f737a89 2e61bac54fad4c018afd23c118bce2399e504020 tests: 1 testcase/path_params/tbox_group/run: vm-scalability/300-never-never-1-1-swap-w-rand-performance/lkp-hsw-ep2 Here dc6db24d24 is previous first bad commit, 2e61bac54 is the head commit of your series applied on top of latest tip of linus/master c945d0227d ("Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") dc6db24d2476cd09 2e61bac54fad4c018afd23c118 ---------------- -------------------------- fail:runs %reproduction fail:runs | | | :12 12% 1:8 last_state.OOM :12 12% 1:8 dmesg.page_allocation_failure:order:#,mode:#(GFP_USER|GFP_DMA32|__GFP_ZERO) :12 12% 1:8 dmesg.Mem-Info 12:12 -100% :8 dmesg.BUG:unable_to_handle_kernel 12:12 -100% :8 dmesg.Oops 12:12 -100% :8 dmesg.RIP:get_partial_node 9:12 -75% :8 dmesg.RIP:_raw_spin_lock_irqsave 3:12 -25% :8 dmesg.general_protection_fault:#[##]SMP 3:12 -25% :8 dmesg.RIP:native_queued_spin_lock_slowpath 3:12 -25% :8 dmesg.Kernel_panic-not_syncing:Hard_LOCKUP 2:12 -17% :8 dmesg.RIP:load_balance 2:12 -17% :8 dmesg.Kernel_panic-not_syncing:Fatal_exception_in_interrupt 1:12 -8% :8 dmesg.RIP:resched_curr 1:12 -8% :8 dmesg.Kernel_panic-not_syncing:Fatal_exception 5:12 -42% :8 dmesg.WARNING:at_include/linux/uaccess.h:#__probe_kernel_read 1:12 -8% :8 dmesg.WARNING:at_lib/list_debug.c:#__list_add [1] https://lkml.org/lkml/2017/2/12/200 Thanks, Xiaolong > >Thanks, >Xiaolong >> >>Change log: >> v1 -> v2: 1. fix some comments. >> 2. add the verification of duplicate processor id. >> >>Dou Liyang (4): >> Revert"x86/acpi: Set persistent cpuid <-> nodeid mapping when booting" >> Revert"x86/acpi: Enable MADT APIs to return disabled apicids" >> acpi: Fix the check handle in case of declaring processors using the >> Device operator >> acpi: Move the verification of duplicate proc_id from booting time to >> hot-plug time >> >> arch/x86/kernel/acpi/boot.c | 2 +- >> drivers/acpi/acpi_processor.c | 50 +++++++++++----- >> drivers/acpi/bus.c | 1 - >> drivers/acpi/processor_core.c | 133 +++++++----------------------------------- >> include/linux/acpi.h | 5 +- >> 5 files changed, 59 insertions(+), 132 deletions(-) >> >>-- >>2.5.5 >> >> >>