From: Cornelia Huck <cornelia.huck@de.ibm.com>
To: qemu-devel@nongnu.org
Cc: borntraeger@de.ibm.com, agraf@suse.de, jfrei@linux.vnet.ibm.com,
Farhan Ali <alifm@linux.vnet.ibm.com>,
Cornelia Huck <cornelia.huck@de.ibm.com>
Subject: [Qemu-devel] [PATCH v2 4/5] pc-bios/s390-ccw: Use the ccw bios to start the network boot
Date: Thu, 23 Feb 2017 13:20:24 +0100 [thread overview]
Message-ID: <20170223122025.10420-5-cornelia.huck@de.ibm.com> (raw)
In-Reply-To: <20170223122025.10420-1-cornelia.huck@de.ibm.com>
From: Farhan Ali <alifm@linux.vnet.ibm.com>
We want to use the ccw bios to start final network boot. To do
this we use ccw bios to detect if the boot device is a virtio
network device and retrieve the start address of the
network boot image.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
---
pc-bios/s390-ccw/bootmap.c | 8 +++++++-
pc-bios/s390-ccw/iplb.h | 3 ++-
pc-bios/s390-ccw/main.c | 20 ++++++++++++++------
pc-bios/s390-ccw/virtio.c | 1 +
pc-bios/s390-ccw/virtio.h | 1 +
5 files changed, 25 insertions(+), 8 deletions(-)
diff --git a/pc-bios/s390-ccw/bootmap.c b/pc-bios/s390-ccw/bootmap.c
index 611102e3ef..b21c877b53 100644
--- a/pc-bios/s390-ccw/bootmap.c
+++ b/pc-bios/s390-ccw/bootmap.c
@@ -724,11 +724,17 @@ static void zipl_load_vscsi(void)
void zipl_load(void)
{
- if (virtio_get_device()->is_cdrom) {
+ VDev *vdev = virtio_get_device();
+
+ if (vdev->is_cdrom) {
ipl_iso_el_torito();
panic("\n! Cannot IPL this ISO image !\n");
}
+ if (virtio_get_device_type() == VIRTIO_ID_NET) {
+ jump_to_IPL_code(vdev->netboot_start_addr);
+ }
+
ipl_scsi();
switch (virtio_get_device_type()) {
diff --git a/pc-bios/s390-ccw/iplb.h b/pc-bios/s390-ccw/iplb.h
index 86abc56a90..890aed9ece 100644
--- a/pc-bios/s390-ccw/iplb.h
+++ b/pc-bios/s390-ccw/iplb.h
@@ -13,7 +13,8 @@
#define IPLB_H
struct IplBlockCcw {
- uint8_t reserved0[85];
+ uint64_t netboot_start_addr;
+ uint8_t reserved0[77];
uint8_t ssid;
uint16_t devno;
uint8_t vm_flags;
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 345b848752..0946766d86 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -53,6 +53,12 @@ static bool find_dev(Schib *schib, int dev_no)
if (!virtio_is_supported(blk_schid)) {
continue;
}
+ /* Skip net devices since no IPLB is created and therefore no
+ * no network bootloader has been loaded
+ */
+ if (virtio_get_device_type() == VIRTIO_ID_NET && dev_no < 0) {
+ continue;
+ }
if ((dev_no < 0) || (schib->pmcw.dev == dev_no)) {
return true;
}
@@ -67,6 +73,7 @@ static void virtio_setup(void)
int ssid;
bool found = false;
uint16_t dev_no;
+ VDev *vdev = virtio_get_device();
/*
* We unconditionally enable mss support. In every sane configuration,
@@ -85,9 +92,6 @@ static void virtio_setup(void)
found = find_dev(&schib, dev_no);
break;
case S390_IPL_TYPE_QEMU_SCSI:
- {
- VDev *vdev = virtio_get_device();
-
vdev->scsi_device_selected = true;
vdev->selected_scsi_device.channel = iplb.scsi.channel;
vdev->selected_scsi_device.target = iplb.scsi.target;
@@ -95,7 +99,6 @@ static void virtio_setup(void)
blk_schid.ssid = iplb.scsi.ssid & 0x3;
found = find_dev(&schib, iplb.scsi.devno);
break;
- }
default:
panic("List-directed IPL not supported yet!\n");
}
@@ -111,9 +114,14 @@ static void virtio_setup(void)
IPL_assert(found, "No virtio device found");
- virtio_setup_device(blk_schid);
+ if (virtio_get_device_type() == VIRTIO_ID_NET) {
+ sclp_print("Network boot device detected\n");
+ vdev->netboot_start_addr = iplb.ccw.netboot_start_addr;
+ } else {
+ virtio_setup_device(blk_schid);
- IPL_assert(virtio_ipl_disk_is_valid(), "No valid IPL device detected");
+ IPL_assert(virtio_ipl_disk_is_valid(), "No valid IPL device detected");
+ }
}
int main(void)
diff --git a/pc-bios/s390-ccw/virtio.c b/pc-bios/s390-ccw/virtio.c
index b333734955..6ee93d56db 100644
--- a/pc-bios/s390-ccw/virtio.c
+++ b/pc-bios/s390-ccw/virtio.c
@@ -585,6 +585,7 @@ bool virtio_is_supported(SubChannelId schid)
switch (vdev.senseid.cu_model) {
case VIRTIO_ID_BLOCK:
case VIRTIO_ID_SCSI:
+ case VIRTIO_ID_NET:
return true;
}
}
diff --git a/pc-bios/s390-ccw/virtio.h b/pc-bios/s390-ccw/virtio.h
index eb35ea5faf..3388a423e5 100644
--- a/pc-bios/s390-ccw/virtio.h
+++ b/pc-bios/s390-ccw/virtio.h
@@ -276,6 +276,7 @@ struct VDev {
uint8_t scsi_dev_heads;
bool scsi_device_selected;
ScsiDevice selected_scsi_device;
+ uint64_t netboot_start_addr;
};
typedef struct VDev VDev;
--
2.11.0
next prev parent reply other threads:[~2017-02-23 12:20 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-23 12:20 [Qemu-devel] [PATCH v2 0/5] s390x: network boot Cornelia Huck
2017-02-23 12:20 ` [Qemu-devel] [PATCH v2 1/5] elf-loader: Allow late loading of elf Cornelia Huck
2017-02-25 6:05 ` Thomas Huth
2017-02-27 12:12 ` Cornelia Huck
2017-02-27 15:56 ` Cornelia Huck
2017-02-23 12:20 ` [Qemu-devel] [PATCH v2 2/5] s390x/ipl: Extend S390IPLState to support network boot Cornelia Huck
2017-02-25 6:18 ` Thomas Huth
2017-02-23 12:20 ` [Qemu-devel] [PATCH v2 3/5] s390x/ipl: Load network boot image Cornelia Huck
2017-02-25 6:18 ` Thomas Huth
2017-02-27 11:51 ` Cornelia Huck
2017-02-27 11:59 ` Thomas Huth
2017-02-23 12:20 ` Cornelia Huck [this message]
2017-02-23 12:20 ` [Qemu-devel] [PATCH v2 5/5] pc-bios/s390-ccw.img: rebuild image Cornelia Huck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170223122025.10420-5-cornelia.huck@de.ibm.com \
--to=cornelia.huck@de.ibm.com \
--cc=agraf@suse.de \
--cc=alifm@linux.vnet.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=jfrei@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.