All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 14/17] sunxi: Pine64: defconfig: enable SPL FIT support
Date: Wed, 1 Mar 2017 16:51:36 +0100	[thread overview]
Message-ID: <20170301155136.ieijdnc2x7ghidry@lukather> (raw)
In-Reply-To: <1488335129-12363-15-git-send-email-andre.przywara@arm.com>

Hi Andre,

On Wed, Mar 01, 2017 at 02:25:26AM +0000, Andre Przywara wrote:
> The Pine64 (and all other 64-bit Allwinner boards) need to load an
> ARM Trusted Firmware image beside the actual U-Boot proper.
> This can now be easily achieved by using the just extended SPL FIT
> loading support, so enable it in the Pine64 defconfig.
> Also add the FIT image as a build target to 64-bit sunxi board to
> trigger the respective Makefile rules.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  configs/pine64_plus_defconfig  | 6 ++++++
>  include/configs/sunxi-common.h | 4 ++++
>  2 files changed, 10 insertions(+)
> 
> diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig
> index 7c7d86f..2b47157 100644
> --- a/configs/pine64_plus_defconfig
> +++ b/configs/pine64_plus_defconfig
> @@ -3,9 +3,14 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
>  CONFIG_ARCH_SUNXI=y
>  CONFIG_MACH_SUN50I=y
>  CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
> +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus"
>  # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>  CONFIG_CONSOLE_MUX=y
>  CONFIG_SPL=y
> +CONFIG_FIT=y
> +CONFIG_SPL_FIT=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_OF_LIBFDT=y

I'm not sure we want to force down that support to all our users.

We should definitely make that easy (basically just switching on an
option), for example a few selects here might be good. But switching
that on, and only for a few boards seems both weird and inconsistent.

>  # CONFIG_CMD_IMLS is not set
>  # CONFIG_CMD_FLASH is not set
>  # CONFIG_CMD_FPGA is not set
> @@ -14,3 +19,4 @@ CONFIG_SPL=y
>  # CONFIG_SPL_EFI_PARTITION is not set
>  CONFIG_SUN8I_EMAC=y
>  CONFIG_USB_EHCI_HCD=y
> +CONFIG_SPL_FIT_GENERATOR="board/sunxi/mksunxi_fit_atf.sh"

And that could be a default value.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170301/7c120ab7/attachment.sig>

  reply	other threads:[~2017-03-01 15:51 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-01  2:25 [U-Boot] [PATCH 00/17] SPL: extend FIT loading support Andre Przywara
2017-03-01  2:25 ` [U-Boot] [PATCH 01/17] armv8: spl: Call spl_relocate_stack_gd for ARMv8 Andre Przywara
2017-03-01  2:25 ` [U-Boot] [PATCH 02/17] SPL: FIT: refactor FDT loading Andre Przywara
2017-03-03  4:53   ` Simon Glass
2017-03-03 11:09     ` Andre Przywara
2017-03-08 21:01       ` Simon Glass
2017-03-14 10:52   ` Lokesh Vutla
2017-03-01  2:25 ` [U-Boot] [PATCH 03/17] SPL: FIT: rework U-Boot image loading Andre Przywara
2017-03-03  4:53   ` Simon Glass
2017-03-14 10:53   ` Lokesh Vutla
2017-03-01  2:25 ` [U-Boot] [PATCH 04/17] SPL: FIT: factor out spl_load_fit_image() Andre Przywara
2017-03-03 16:56   ` Andrew F. Davis
2017-03-03 19:03     ` Franklin S Cooper Jr
2017-03-08 21:00   ` Simon Glass
2017-03-14 10:53   ` Lokesh Vutla
2017-03-01  2:25 ` [U-Boot] [PATCH 05/17] SPL: FIT: allow loading multiple images Andre Przywara
2017-03-08 21:00   ` Simon Glass
2017-03-27  1:19     ` André Przywara
2017-04-01  4:22       ` Simon Glass
2017-03-14 10:53   ` Lokesh Vutla
2017-03-01  2:25 ` [U-Boot] [PATCH 06/17] tools: mksunxiboot: allow larger SPL binaries Andre Przywara
2017-03-08 21:01   ` Simon Glass
2017-03-29 14:43   ` [U-Boot] [linux-sunxi] " Olliver Schinagl
2017-03-29 14:54     ` Andre Przywara
2017-03-01  2:25 ` [U-Boot] [PATCH 07/17] armv8: SPL: only compile GIC code if needed Andre Przywara
2017-03-08 21:01   ` Simon Glass
2017-03-01  2:25 ` [U-Boot] [PATCH 08/17] armv8: fsl: move ccn504 code into FSL Makefile Andre Przywara
2017-03-08 21:01   ` Simon Glass
2017-03-27  1:18     ` André Przywara
2017-03-01  2:25 ` [U-Boot] [PATCH 09/17] sunxi: A64: move SPL stack to end of SRAM A2 Andre Przywara
2017-03-08 21:01   ` Simon Glass
2017-03-01  2:25 ` [U-Boot] [PATCH 10/17] sunxi: SPL: store RAM size in gd Andre Przywara
2017-03-08 21:01   ` Simon Glass
2017-03-01  2:25 ` [U-Boot] [PATCH 11/17] sunxi: SPL: add FIT config selector for Pine64 boards Andre Przywara
2017-03-01  3:03   ` [U-Boot] [linux-sunxi] " Icenowy Zheng
2017-03-03  0:47     ` André Przywara
2017-03-08 21:01   ` [U-Boot] " Simon Glass
2017-03-01  2:25 ` [U-Boot] [PATCH 12/17] Makefile: add rules to generate SPL FIT images Andre Przywara
2017-03-03 16:58   ` Andrew F. Davis
2017-03-08 21:01   ` Simon Glass
2017-03-01  2:25 ` [U-Boot] [PATCH 13/17] sunxi: A64: Pine64: introduce FIT generator script Andre Przywara
2017-03-08 21:01   ` Simon Glass
2017-03-01  2:25 ` [U-Boot] [PATCH 14/17] sunxi: Pine64: defconfig: enable SPL FIT support Andre Przywara
2017-03-01 15:51   ` Maxime Ripard [this message]
2017-03-01  2:25 ` [U-Boot] [PATCH 15/17] sunxi: OrangePi-PC2: " Andre Przywara
2017-03-08 21:01   ` Simon Glass
2017-03-01  2:25 ` [U-Boot] [PATCH 16/17] sunxi: Store the device tree name in the SPL header Andre Przywara
2017-03-08 21:01   ` Simon Glass
2017-03-27  1:18     ` André Przywara
2017-04-01  4:22       ` Simon Glass
2017-03-01  2:25 ` [U-Boot] [PATCH 17/17] sunxi: use SPL header DT name for FIT board matching Andre Przywara
2017-03-08 21:01   ` Simon Glass
2017-03-06 11:24 ` [U-Boot] [PATCH 00/17] SPL: extend FIT loading support Kever Yang
2017-03-14 11:03 ` Dr. Philipp Tomsich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170301155136.ieijdnc2x7ghidry@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.