Hi Jason,

On Fri, Mar 03, 2017 at 09:43:55AM -0800, Jason Uy wrote:
> James,
> 
> Can you verify that changing the code to the following fixes your problem?
> 
> if (IS_ERR_OR_NULL(d->clk) || !old)
>     goto out;

It does, however I'm not at all convinced it is correct. clk_get either
returns a valid opaque clock cookie that can be passed to other clock
functions (which includes NULL), or ERR_PTR(-errno), which IS_ERR()
should catch for errors.

According to this thread:

https://lists.gt.net/linux/kernel/2102623

we should stick to the clk API and use IS_ERR() rather than
IS_ERR_OR_NULL(), but shouldn't be blindly accepting the result of
clk_get_rate() (or I suppose clk_round_rate()), but rather checking for
the value 0 and handling that case as "we don't have a usable clock from
the clk api, fall back to something else".

Cheers
James

> 
> Regards,
> Jason
> 
> -----Original Message-----
> From: Ray Jui [mailto:ray.jui@broadcom.com]
> Sent: March-03-17 9:34 AM
> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>; James Hogan
> <james.hogan@imgtec.com>; Heiko Stuebner <heiko@sntech.de>
> Cc: Jason Uy <jason.uy@broadcom.com>; Greg Kroah-Hartman
> <gregkh@linuxfoundation.org>; Jiri Slaby <jslaby@suse.com>; Kefeng Wang
> <wangkefeng.wang@huawei.com>; Noam Camus <noamc@ezchip.com>; Heikki Krogerus
> <heikki.krogerus@linux.intel.com>; Wang Hongcheng <annie.wang@amd.com>;
> linux-serial@vger.kernel.org; LKML <linux-kernel@vger.kernel.org>;
> bcm-kernel-feedback-list@broadcom.com; Linux MIPS Mailing List
> <linux-mips@linux-mips.org>; David Daney <david.daney@cavium.com>; Russell
> King <linux@armlinux.org.uk>; linux-clk@vger.kernel.org; Viresh Kumar
> <viresh.kumar@st.com>
> Subject: Re: [PATCH v2 1/1] serial: 8250_dw: Allow hardware flow control to
> be used
> 
> Hi Andy/Jason,
> 
> On 3/3/2017 5:31 AM, Andy Shevchenko wrote:
> > Heiko, you might be interested in this as well.
> >
> > On Fri, 2017-03-03 at 00:21 +0000, James Hogan wrote:
> >> On Wed, Mar 01, 2017 at 08:50:20PM +0200, Andy Shevchenko wrote:
> >>> On Wed, 2017-03-01 at 18:02 +0000, James Hogan wrote:
> >>>> On 11 January 2017 at 19:48, Jason Uy <jason.uy@broadcom.com>
> >>>> wrote:
> >>>>> In the most common use case, the Synopsys DW UART driver does not
> >>>>> set the set_termios callback function.  This prevents
> >>>>> UPSTAT_AUTOCTS from being set when the UART flag CRTSCTS is set.
> >>>>> As a result, the driver will use software flow control as opposed
> >>>>> to hardware flow control.
> >>>>>
> >>>>> To fix the problem, the set_termios callback function is set to
> >>>>> the DW specific function.  The logic to set UPSTAT_AUTOCTS is
> >>>>> moved so that any clock error will not affect setting the hardware
> >>>>> flow control.
> >>>> Bisection shows that this patch, commit
> >>>> 6a171b29937984a5e0bf29d6577b055998f03edb, has broken boot of the
> >>>> Cavium Octeon III based UTM-8 board (MIPS architecture).
> >>>>
> >>>> I now get the following warning:
> >>>> [<ffffffff8149c2e4>] uart_get_baud_rate+0xfc/0x1f0
> >>>> [<ffffffff814a5098>] serial8250_do_set_termios+0xb0/0x440
> >>>> [<ffffffff8149c710>] uart_set_options+0xe8/0x190
> >>>> [<ffffffff814a6cdc>] serial8250_console_setup+0x84/0x158
> >>>> [<ffffffff814a11ec>] univ8250_console_setup+0x54/0x70
> >>>> [<ffffffff811901a0>] register_console+0x1c8/0x418
> >>>> [<ffffffff8149f004>] uart_add_one_port+0x434/0x4b0
> >>>> [<ffffffff814a1af8>] serial8250_register_8250_port+0x2d8/0x440
> >>>> [<ffffffff814aa620>] dw8250_probe+0x388/0x5e8 Then it hangs and the
> >>>> watchdog restarts the machine.
> >>>>
> >>>> Any ideas?
> >>>
> >>> 1. Does it use clock on that platform?
> >
> >> I've now dug a little deeper. Essentially what is going on is:
> >>
> >> 1) CONFIG_HAVE_CLK=n (Octeon doesn't select it)
> >> 2) The CONFIG_HAVE_CLK=n implementation of devm_clk_get() returns
> >> NULL
> >> 3) The "if (IS_ERR(d->clk) || !old) {" check in dw8250_set_termios()
> >>    doesn't match, since !IS_ERR(NULL)
> >> 4) The CONFIG_HAVE_CLK=n implementation of clk_round_rate() returns 0
> >> 5) The CONFIG_HAVE_CLK=n implementation of clk_set_rate(d->clk, 0)
> >>    returns 0
> >> 6) dw8250_set_termios() thinks the frequency for that baud rate has
> >> been
> >>    set successfully and writes 0 into uartclk
> >> 7) it all goes wrong from there...
> >
> > So, it means we have need special care of NULL case here, and
> > honestly, I don't like it. But it seems the only feasible (quick) fix
> > right now.
> 
> I agree. I think it should have been:
> 
> if (IS_ERR_OR_NULL(d->clk) || !old)
>     goto out;
> 
> I think it makes sense to validate to make sure the 'clk' pointer is valid
> before proceeding any further down below (regardless of how well or how not
> well the clock framework handles it).
> 
> Thanks,
> 
> Ray
> 
> >
> >> The CONFIG_HAVE_CLK=n implementation of devm_clk_get() in particular
> >> seems highly questionable to me, given that commit 93abe8e4b13a ("clk:
> >> add non CONFIG_HAVE_CLK routines") which added it 5 years ago says:
> >>
> >>> These calls will return error for platforms that don't select
> >>> HAVE_CLK
> >>
> >> And NULL isn't an error in this API.
> >
> > Which is okay. I dunno what should be returned from clk_round_rate()
> > if clk is NULL. I would fix CLK framework, though I would like to
> > gather more details.
> >
> > Btw, I hope you also noticed this one:
> >
> > http://www.spinics.net/lists/linux-serial/msg25314.html
> >