All of lore.kernel.org
 help / color / mirror / Atom feed
From: linus.walleij@linaro.org (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] RFT: irqchip: replace moxa with ftintc010
Date: Sun, 12 Mar 2017 00:15:05 +0100	[thread overview]
Message-ID: <20170311231505.16056-1-linus.walleij@linaro.org> (raw)

The Moxa Art interrupt controller is very very likely just an instance
of the Faraday FTINTC010 interrupt controller from Faraday Technology.
An indication would be its close association with the FA526 ARM core
and the fact that the register layout is the same.

The implementation in irq-moxart.c can probably be right off replaced
with the irq-ftintc010.c driver by adding a compatible string, selecting
this irqchip from the machine and run.

As a bonus we have an irqchip driver supporting high/low and
rising/falling edges for the Moxa Art, and shared code with the Gemini
platform.

Cc: arm at kernel.org
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Jonas: it would be great if you could test this so we can unify the
drivers.

ARM SoC maintainers: if allright with you, please ACK the oneline
change in the moxart Kconfig so we can merge the patch with the rest
of the Faraday refactorings into the irqchip tree.
---
 arch/arm/mach-moxart/Kconfig    |   2 +-
 drivers/irqchip/Makefile        |   1 -
 drivers/irqchip/irq-ftintc010.c |   2 +
 drivers/irqchip/irq-moxart.c    | 116 ----------------------------------------
 4 files changed, 3 insertions(+), 118 deletions(-)
 delete mode 100644 drivers/irqchip/irq-moxart.c

diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index f69e28b85e88..70db2abf6163 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -3,8 +3,8 @@ menuconfig ARCH_MOXART
 	depends on ARCH_MULTI_V4
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
+	select FARADAY_FTINTC010
 	select MOXART_TIMER
-	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	select PHYLIB if NETDEVICES
 	help
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index cdf3474d3851..d80bc3e9d511 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
 obj-$(CONFIG_METAG)			+= irq-metag-ext.o
 obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)	+= irq-metag.o
-obj-$(CONFIG_ARCH_MOXART)		+= irq-moxart.o
 obj-$(CONFIG_CLPS711X_IRQCHIP)		+= irq-clps711x.o
 obj-$(CONFIG_OR1K_PIC)			+= irq-or1k-pic.o
 obj-$(CONFIG_ORION_IRQCHIP)		+= irq-orion.o
diff --git a/drivers/irqchip/irq-ftintc010.c b/drivers/irqchip/irq-ftintc010.c
index 8c52450b5075..1c6eefa79099 100644
--- a/drivers/irqchip/irq-ftintc010.c
+++ b/drivers/irqchip/irq-ftintc010.c
@@ -190,3 +190,5 @@ IRQCHIP_DECLARE(faraday, "faraday,ftintc010",
 		ft010_of_init_irq);
 IRQCHIP_DECLARE(gemini, "cortina,gemini-interrupt-controller",
 		ft010_of_init_irq);
+IRQCHIP_DECLARE(moxa, "moxa,moxart-ic",
+		ft010_of_init_irq);
diff --git a/drivers/irqchip/irq-moxart.c b/drivers/irqchip/irq-moxart.c
deleted file mode 100644
index a24b06a1718b..000000000000
--- a/drivers/irqchip/irq-moxart.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * MOXA ART SoCs IRQ chip driver.
- *
- * Copyright (C) 2013 Jonas Jensen
- *
- * Jonas Jensen <jonas.jensen@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqchip.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/irqdomain.h>
-
-#include <asm/exception.h>
-
-#define IRQ_SOURCE_REG		0
-#define IRQ_MASK_REG		0x04
-#define IRQ_CLEAR_REG		0x08
-#define IRQ_MODE_REG		0x0c
-#define IRQ_LEVEL_REG		0x10
-#define IRQ_STATUS_REG		0x14
-
-#define FIQ_SOURCE_REG		0x20
-#define FIQ_MASK_REG		0x24
-#define FIQ_CLEAR_REG		0x28
-#define FIQ_MODE_REG		0x2c
-#define FIQ_LEVEL_REG		0x30
-#define FIQ_STATUS_REG		0x34
-
-
-struct moxart_irq_data {
-	void __iomem *base;
-	struct irq_domain *domain;
-	unsigned int interrupt_mask;
-};
-
-static struct moxart_irq_data intc;
-
-static void __exception_irq_entry handle_irq(struct pt_regs *regs)
-{
-	u32 irqstat;
-	int hwirq;
-
-	irqstat = readl(intc.base + IRQ_STATUS_REG);
-
-	while (irqstat) {
-		hwirq = ffs(irqstat) - 1;
-		handle_IRQ(irq_linear_revmap(intc.domain, hwirq), regs);
-		irqstat &= ~(1 << hwirq);
-	}
-}
-
-static int __init moxart_of_intc_init(struct device_node *node,
-				      struct device_node *parent)
-{
-	unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
-	int ret;
-	struct irq_chip_generic *gc;
-
-	intc.base = of_iomap(node, 0);
-	if (!intc.base) {
-		pr_err("%s: unable to map IC registers\n",
-		       node->full_name);
-		return -EINVAL;
-	}
-
-	intc.domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops,
-					    intc.base);
-	if (!intc.domain) {
-		pr_err("%s: unable to create IRQ domain\n", node->full_name);
-		return -EINVAL;
-	}
-
-	ret = irq_alloc_domain_generic_chips(intc.domain, 32, 1,
-					     "MOXARTINTC", handle_edge_irq,
-					     clr, 0, IRQ_GC_INIT_MASK_CACHE);
-	if (ret) {
-		pr_err("%s: could not allocate generic chip\n",
-		       node->full_name);
-		irq_domain_remove(intc.domain);
-		return -EINVAL;
-	}
-
-	ret = of_property_read_u32(node, "interrupt-mask",
-				   &intc.interrupt_mask);
-	if (ret)
-		pr_err("%s: could not read interrupt-mask DT property\n",
-		       node->full_name);
-
-	gc = irq_get_domain_generic_chip(intc.domain, 0);
-
-	gc->reg_base = intc.base;
-	gc->chip_types[0].regs.mask = IRQ_MASK_REG;
-	gc->chip_types[0].regs.ack = IRQ_CLEAR_REG;
-	gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
-	gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
-	gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
-
-	writel(0, intc.base + IRQ_MASK_REG);
-	writel(0xffffffff, intc.base + IRQ_CLEAR_REG);
-
-	writel(intc.interrupt_mask, intc.base + IRQ_MODE_REG);
-	writel(intc.interrupt_mask, intc.base + IRQ_LEVEL_REG);
-
-	set_handle_irq(handle_irq);
-
-	return 0;
-}
-IRQCHIP_DECLARE(moxa_moxart_ic, "moxa,moxart-ic", moxart_of_intc_init);
-- 
2.9.3

             reply	other threads:[~2017-03-11 23:15 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-11 23:15 Linus Walleij [this message]
2017-03-13 16:05 ` [PATCH 4/4] RFT: irqchip: replace moxa with ftintc010 Jonas Jensen
2017-03-13 19:56   ` Linus Walleij
2017-03-14 14:58     ` Jonas Jensen
2017-03-18 16:32       ` Linus Walleij
2017-03-13 23:04 ` Olof Johansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170311231505.16056-1-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.