All of lore.kernel.org
 help / color / mirror / Atom feed
From: Himanshu Madhani <himanshu.madhani@cavium.com>
To: target-devel@vger.kernel.org, Bart.VanAssche@sandisk.com,
	nab@linux-iscsi.org
Cc: giridhar.malavali@cavium.com, linux-scsi@vger.kernel.org,
	himanshu.madhani@cavium.com
Subject: [PATCH v4 13/14] qla2xxx: Fix delayed response to command for loop mode/direct connect.
Date: Wed, 15 Mar 2017 09:48:55 -0700	[thread overview]
Message-ID: <20170315164856.17255-14-himanshu.madhani@cavium.com> (raw)
In-Reply-To: <20170315164856.17255-1-himanshu.madhani@cavium.com>

From: Quinn Tran <quinn.tran@cavium.com>

Current driver wait for FW to be in the ready state before
processing in-coming commands. For Arbitrated Loop or
Point-to- Point (not switch), FW Ready state can take a while.
FW will transition to ready state after all Nports have been
logged in. In the mean time, certain initiators have completed
the login and starts IO. Driver needs to start processing all
queues if FW is already started.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
---
 drivers/scsi/qla2xxx/qla_def.h    | 10 ++++++++--
 drivers/scsi/qla2xxx/qla_init.c   | 12 ++++++++++++
 drivers/scsi/qla2xxx/qla_isr.c    | 14 +++++++++++++-
 drivers/scsi/qla2xxx/qla_mbx.c    |  6 +++---
 drivers/scsi/qla2xxx/qla_os.c     | 21 ++++++++++++++++++++-
 drivers/scsi/qla2xxx/qla_target.c | 38 +++++++++++++++++++++++++-------------
 6 files changed, 81 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 9251918773b1..ae119018dfaa 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3322,6 +3322,10 @@ struct qlt_hw_data {
 
 #define LEAK_EXCHG_THRESH_HOLD_PERCENT 75	/* 75 percent */
 
+#define QLA_EARLY_LINKUP(_ha) \
+	((_ha->flags.n2n_ae || _ha->flags.lip_ae) && \
+	 _ha->flags.fw_started && !_ha->flags.fw_init_done)
+
 /*
  * Qlogic host adapter specific data structure.
 */
@@ -3371,9 +3375,11 @@ struct qla_hw_data {
 		uint32_t	fawwpn_enabled:1;
 		uint32_t	exlogins_enabled:1;
 		uint32_t	exchoffld_enabled:1;
-		/* 35 bits */
 
+		uint32_t	lip_ae:1;
+		uint32_t	n2n_ae:1;
 		uint32_t	fw_started:1;
+		uint32_t	fw_init_done:1;
 	} flags;
 
 	/* This spinlock is used to protect "io transactions", you must
@@ -3466,7 +3472,6 @@ struct qla_hw_data {
 #define P2P_LOOP  3
 	uint8_t		interrupts_on;
 	uint32_t	isp_abort_cnt;
-
 #define PCI_DEVICE_ID_QLOGIC_ISP2532    0x2532
 #define PCI_DEVICE_ID_QLOGIC_ISP8432    0x8432
 #define PCI_DEVICE_ID_QLOGIC_ISP8001	0x8001
@@ -3947,6 +3952,7 @@ typedef struct scsi_qla_host {
 	struct list_head vp_fcports;	/* list of fcports */
 	struct list_head work_list;
 	spinlock_t work_lock;
+	struct work_struct iocb_work;
 
 	/* Commonly used flags and state information. */
 	struct Scsi_Host *host;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b0f6ad3020d3..f9d2fe7b1ade 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3178,6 +3178,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 	} else {
 		ql_dbg(ql_dbg_init, vha, 0x00d3,
 		    "Init Firmware -- success.\n");
+		ha->flags.fw_started = 1;
 	}
 
 	return (rval);
@@ -4000,6 +4001,7 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
 			atomic_set(&vha->loop_state, LOOP_READY);
 			ql_dbg(ql_dbg_disc, vha, 0x2069,
 			    "LOOP READY.\n");
+			ha->flags.fw_init_done = 1;
 
 			/*
 			 * Process any ATIO queue entries that came in
@@ -5491,6 +5493,11 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	if (!(IS_P3P_TYPE(ha)))
 		ha->isp_ops->reset_chip(vha);
 
+	ha->flags.n2n_ae = 0;
+	ha->flags.lip_ae = 0;
+	ha->current_topology = 0;
+	ha->flags.fw_started = 0;
+	ha->flags.fw_init_done = 0;
 	ha->chip_reset++;
 
 	atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
@@ -6767,6 +6774,8 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
 		return;
 	if (!ha->fw_major_version)
 		return;
+	if (!ha->flags.fw_started)
+		return;
 
 	ret = qla2x00_stop_firmware(vha);
 	for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
@@ -6780,6 +6789,9 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
 		    "Attempting retry of stop-firmware command.\n");
 		ret = qla2x00_stop_firmware(vha);
 	}
+
+	ha->flags.fw_started = 0;
+	ha->flags.fw_init_done = 0;
 }
 
 int
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 3953c8d6af69..3203367a4f42 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -708,6 +708,8 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 		    "mbx7=%xh.\n", mb[1], mb[2], mb[3], mbx);
 
 		ha->isp_ops->fw_dump(vha, 1);
+		ha->flags.fw_init_done = 0;
+		ha->flags.fw_started = 0;
 
 		if (IS_FWI2_CAPABLE(ha)) {
 			if (mb[1] == 0 && mb[2] == 0) {
@@ -761,6 +763,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 		break;
 
 	case MBA_LIP_OCCURRED:		/* Loop Initialization Procedure */
+		ha->flags.lip_ae = 1;
+		ha->flags.n2n_ae = 0;
+
 		ql_dbg(ql_dbg_async, vha, 0x5009,
 		    "LIP occurred (%x).\n", mb[1]);
 
@@ -797,6 +802,10 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 		break;
 
 	case MBA_LOOP_DOWN:		/* Loop Down Event */
+		ha->flags.n2n_ae = 0;
+		ha->flags.lip_ae = 0;
+		ha->current_topology = 0;
+
 		mbx = (IS_QLA81XX(ha) || IS_QLA8031(ha))
 			? RD_REG_WORD(&reg24->mailbox4) : 0;
 		mbx = (IS_P3P_TYPE(ha)) ? RD_REG_WORD(&reg82->mailbox_out[4])
@@ -866,6 +875,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 
 	/* case MBA_DCBX_COMPLETE: */
 	case MBA_POINT_TO_POINT:	/* Point-to-Point */
+		ha->flags.lip_ae = 0;
+		ha->flags.n2n_ae = 1;
+
 		if (IS_QLA2100(ha))
 			break;
 
@@ -2706,7 +2718,7 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
 	struct sts_entry_24xx *pkt;
 	struct qla_hw_data *ha = vha->hw;
 
-	if (!vha->flags.online)
+	if (!ha->flags.fw_started)
 		return;
 
 	while (rsp->ring_ptr->signature != RESPONSE_PROCESSED) {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 53d9579acc74..a113ab3592a7 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3638,11 +3638,11 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 
 	if (rptid_entry->format == 0) {
 		/* loop */
-		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10b7,
+		ql_dbg(ql_dbg_async, vha, 0x10b7,
 		    "Format 0 : Number of VPs setup %d, number of "
 		    "VPs acquired %d.\n", rptid_entry->vp_setup,
 		    rptid_entry->vp_acquired);
-		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10b8,
+		ql_dbg(ql_dbg_async, vha, 0x10b8,
 		    "Primary port id %02x%02x%02x.\n",
 		    rptid_entry->port_id[2], rptid_entry->port_id[1],
 		    rptid_entry->port_id[0]);
@@ -3651,7 +3651,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 
 	} else if (rptid_entry->format == 1) {
 		/* fabric */
-		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10b9,
+		ql_dbg(ql_dbg_async, vha, 0x10b9,
 		    "Format 1: VP[%d] enabled - status %d - with "
 		    "port id %02x%02x%02x.\n", rptid_entry->vp_idx,
 			rptid_entry->vp_status,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 344faf59783d..41d5b09f7326 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2560,6 +2560,20 @@ qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
 	return atomic_read(&vha->loop_state) == LOOP_READY;
 }
 
+static void qla2x00_iocb_work_fn(struct work_struct *work)
+{
+	struct scsi_qla_host *vha = container_of(work,
+		struct scsi_qla_host, iocb_work);
+	int cnt = 0;
+
+	while (!list_empty(&vha->work_list)) {
+		qla2x00_do_work(vha);
+		cnt++;
+		if (cnt > 10)
+			break;
+	}
+}
+
 /*
  * PCI driver interface
  */
@@ -3078,6 +3092,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	 */
 	qla2xxx_wake_dpc(base_vha);
 
+	INIT_WORK(&base_vha->iocb_work, qla2x00_iocb_work_fn);
 	INIT_WORK(&ha->board_disable, qla2x00_disable_board_on_pci_error);
 
 	if (IS_QLA8031(ha) || IS_MCTP_CAPABLE(ha)) {
@@ -4321,7 +4336,11 @@ qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e)
 	spin_lock_irqsave(&vha->work_lock, flags);
 	list_add_tail(&e->list, &vha->work_list);
 	spin_unlock_irqrestore(&vha->work_lock, flags);
-	qla2xxx_wake_dpc(vha);
+
+	if (QLA_EARLY_LINKUP(vha->hw))
+		schedule_work(&vha->iocb_work);
+	else
+		qla2xxx_wake_dpc(vha);
 
 	return QLA_SUCCESS;
 }
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 7278e046bf87..0e03ca2ab3e5 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -638,6 +638,7 @@ int qla24xx_async_notify_ack(scsi_qla_host_t *vha, fc_port_t *fcport,
 		break;
 	case SRB_NACK_PRLI:
 		fcport->fw_login_state = DSC_LS_PRLI_PEND;
+		fcport->deleted = 0;
 		c = "PRLI";
 		break;
 	case SRB_NACK_LOGO:
@@ -1576,6 +1577,9 @@ static void qlt_send_notify_ack(struct scsi_qla_host *vha,
 	request_t *pkt;
 	struct nack_to_isp *nack;
 
+	if (!ha->flags.fw_started)
+		return;
+
 	ql_dbg(ql_dbg_tgt, vha, 0xe004, "Sending NOTIFY_ACK (ha=%p)\n", ha);
 
 	/* Send marker if required */
@@ -3053,7 +3057,7 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type,
 	else
 		vha->tgt_counters.core_qla_que_buf++;
 
-	if (!vha->flags.online || cmd->reset_count != ha->chip_reset) {
+	if (!ha->flags.fw_started || cmd->reset_count != ha->chip_reset) {
 		/*
 		 * Either the port is not online or this request was from
 		 * previous life, just abort the processing.
@@ -3194,7 +3198,7 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd)
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
-	if (!vha->flags.online || (cmd->reset_count != ha->chip_reset) ||
+	if (!ha->flags.fw_started || (cmd->reset_count != ha->chip_reset) ||
 	    (cmd->sess && cmd->sess->deleted)) {
 		/*
 		 * Either the port is not online or this request was from
@@ -3372,7 +3376,7 @@ static int __qlt_send_term_imm_notif(struct scsi_qla_host *vha,
 	ql_dbg(ql_dbg_tgt_tmr, vha, 0xe01c,
 	    "Sending TERM ELS CTIO (ha=%p)\n", ha);
 
-	pkt = (request_t *)qla2x00_alloc_iocbs_ready(vha, NULL);
+	pkt = (request_t *)qla2x00_alloc_iocbs(vha, NULL);
 	if (pkt == NULL) {
 		ql_dbg(ql_dbg_tgt, vha, 0xe080,
 		    "qla_target(%d): %s failed: unable to allocate "
@@ -4697,7 +4701,8 @@ static int qlt_24xx_handle_els(struct scsi_qla_host *vha,
 		}
 
 		if (sess != NULL) {
-			if (sess->fw_login_state == DSC_LS_PLOGI_PEND) {
+			if (sess->fw_login_state != DSC_LS_PLOGI_PEND &&
+			    sess->fw_login_state != DSC_LS_PLOGI_COMP) {
 				/*
 				 * Impatient initiator sent PRLI before last
 				 * PLOGI could finish. Will force him to re-try,
@@ -4736,15 +4741,23 @@ static int qlt_24xx_handle_els(struct scsi_qla_host *vha,
 
 		/* Make session global (not used in fabric mode) */
 		if (ha->current_topology != ISP_CFG_F) {
-			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
-			set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
-			qla2xxx_wake_dpc(vha);
+			if (sess) {
+				ql_dbg(ql_dbg_disc, vha, 0xffff,
+				    "%s %d %8phC post nack\n",
+				    __func__, __LINE__, sess->port_name);
+				qla24xx_post_nack_work(vha, sess, iocb,
+					SRB_NACK_PRLI);
+				res = 0;
+			} else {
+				set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
+				set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
+				qla2xxx_wake_dpc(vha);
+			}
 		} else {
 			if (sess) {
 				ql_dbg(ql_dbg_disc, vha, 0xffff,
-					   "%s %d %8phC post nack\n",
-					   __func__, __LINE__, sess->port_name);
-
+				    "%s %d %8phC post nack\n",
+				    __func__, __LINE__, sess->port_name);
 				qla24xx_post_nack_work(vha, sess, iocb,
 					SRB_NACK_PRLI);
 				res = 0;
@@ -4752,7 +4765,6 @@ static int qlt_24xx_handle_els(struct scsi_qla_host *vha,
 		}
 		break;
 
-
 	case ELS_TPRLO:
 		if (le16_to_cpu(iocb->u.isp24.flags) &
 			NOTIFY24XX_FLAGS_GLOBAL_TPRLO) {
@@ -5222,7 +5234,7 @@ static void qlt_24xx_atio_pkt(struct scsi_qla_host *vha,
 	unsigned long flags;
 
 	if (unlikely(tgt == NULL)) {
-		ql_dbg(ql_dbg_io, vha, 0x3064,
+		ql_dbg(ql_dbg_tgt, vha, 0x3064,
 		    "ATIO pkt, but no tgt (ha %p)", ha);
 		return;
 	}
@@ -6359,7 +6371,7 @@ qlt_24xx_process_atio_queue(struct scsi_qla_host *vha, uint8_t ha_locked)
 	struct atio_from_isp *pkt;
 	int cnt, i;
 
-	if (!vha->flags.online)
+	if (!ha->flags.fw_started)
 		return;
 
 	while ((ha->tgt.atio_ring_ptr->signature != ATIO_PROCESSED) ||
-- 
2.12.0

  parent reply	other threads:[~2017-03-15 16:48 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-15 16:48 [PATCH v4 00/14] qla2xxx: Bug Fixes and updates for target Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 01/14] qla2xxx: Allow vref count to timeout on vport delete Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 02/14] qla2xxx: Fix memory leak for abts processing Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 03/14] qla2xxx: Fix request queue corruption Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 04/14] qla2xxx: Fix inadequate lock protection for ABTS Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 05/14] qla2xxx: Fix sess_lock & hardware_lock lock order problem Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 06/14] qla2xxx: Allow relogin to proceed if remote login did not finish Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 07/14] qla2xxx: Improve T10-DIF/PI handling in driver Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 08/14] qla2xxx: Export DIF stats via debugfs Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 09/14] qla2xxx: Add async new target notification Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 10/14] qla2xxx: Use IOCB interface to submit non-critical MBX Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 11/14] qla2xxx: Add DebugFS node to display Port Database Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 12/14] qla2xxx: Change scsi host lookup method Himanshu Madhani
2017-03-15 16:48 ` Himanshu Madhani [this message]
2017-03-15 16:48 ` [PATCH v4 14/14] qla2xxx: Update driver version to 9.00.00.00-k Himanshu Madhani
2017-03-19  0:32 ` [PATCH v4 00/14] qla2xxx: Bug Fixes and updates for target Nicholas A. Bellinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170315164856.17255-14-himanshu.madhani@cavium.com \
    --to=himanshu.madhani@cavium.com \
    --cc=Bart.VanAssche@sandisk.com \
    --cc=giridhar.malavali@cavium.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=nab@linux-iscsi.org \
    --cc=target-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.