From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ralph Sennhauser Subject: [PATCH v2 0/4] gpio: mvebu: Add PWM fan support Date: Sat, 18 Mar 2017 16:43:00 +0100 Message-ID: <20170318154305.28348-1-ralph.sennhauser@gmail.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-gpio@vger.kernel.org Cc: Andrew Lunn , Imre Kaloz , Ralph Sennhauser , Thierry Reding , Linus Walleij , Alexandre Courbot , "open list:PWM SUBSYSTEM" , open list List-Id: linux-gpio@vger.kernel.org Hi everyone This patch series was originally submitted by Andrew Lunn but got stalled. I picked up the series and addressed what was discussed for the earlier submission with some helpful input from Andrew. Hopefully this time support for the PWM fan as found on Linksys WRT1900AC (Mamba) will make it in. Implementing as an MFD was discarded due to backward compatibility. The original discussion can be read at [1]. This series depends on two cleanup series. The first [2] ("gpio: mvebu: preparatory cleanup for pwm-fan support") got applied but has yet to appear in linux-next. The second one [3] ("gpio: mvebu: use BIT macro instead of bit shifting") is still pending review. [1] https://patchwork.ozlabs.org/patch/427287/ [2] https://lkml.org/lkml/2017/3/16/62 [3] https://lkml.org/lkml/2017/3/17/493 --- Changes v1 -> v2: Patch 1/4 gpio: mvebu: Add limited PWM support: * use BIT macro (suggested by Linus Walleij) * move id from struct mvebu_pwm to struct mvebu_gpio_chip, implement blink select as if else and comment on the chip id for code clarity (to accommodate Linus Walleijs request for a code clarification / comment. If you can word it better I'm all ears.) * Move function comment mvebu_pwm_probe into the function itself. --- Pending: * Needs ACK from Thierry Reding to be merged via linux-gpio tree by Linus Walleij. --- Andrew Lunn (4): gpio: mvebu: Add limited PWM support mvebu: xp: Add pwm properties to .dtsi files ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 +++ MAINTAINERS | 2 + arch/arm/boot/dts/armada-370.dtsi | 10 +- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 +- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 +- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 +- arch/arm/configs/mvebu_v7_defconfig | 2 + drivers/gpio/gpio-mvebu.c | 291 +++++++++++++++++++-- 9 files changed, 342 insertions(+), 30 deletions(-) -- 2.10.2 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751471AbdCRPo5 (ORCPT ); Sat, 18 Mar 2017 11:44:57 -0400 Received: from mail-wm0-f67.google.com ([74.125.82.67]:32801 "EHLO mail-wm0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751087AbdCRPoy (ORCPT ); Sat, 18 Mar 2017 11:44:54 -0400 From: Ralph Sennhauser To: linux-gpio@vger.kernel.org Cc: Andrew Lunn , Imre Kaloz , Ralph Sennhauser , Thierry Reding , Linus Walleij , Alexandre Courbot , linux-pwm@vger.kernel.org (open list:PWM SUBSYSTEM), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v2 0/4] gpio: mvebu: Add PWM fan support Date: Sat, 18 Mar 2017 16:43:00 +0100 Message-Id: <20170318154305.28348-1-ralph.sennhauser@gmail.com> X-Mailer: git-send-email 2.10.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi everyone This patch series was originally submitted by Andrew Lunn but got stalled. I picked up the series and addressed what was discussed for the earlier submission with some helpful input from Andrew. Hopefully this time support for the PWM fan as found on Linksys WRT1900AC (Mamba) will make it in. Implementing as an MFD was discarded due to backward compatibility. The original discussion can be read at [1]. This series depends on two cleanup series. The first [2] ("gpio: mvebu: preparatory cleanup for pwm-fan support") got applied but has yet to appear in linux-next. The second one [3] ("gpio: mvebu: use BIT macro instead of bit shifting") is still pending review. [1] https://patchwork.ozlabs.org/patch/427287/ [2] https://lkml.org/lkml/2017/3/16/62 [3] https://lkml.org/lkml/2017/3/17/493 --- Changes v1 -> v2: Patch 1/4 gpio: mvebu: Add limited PWM support: * use BIT macro (suggested by Linus Walleij) * move id from struct mvebu_pwm to struct mvebu_gpio_chip, implement blink select as if else and comment on the chip id for code clarity (to accommodate Linus Walleijs request for a code clarification / comment. If you can word it better I'm all ears.) * Move function comment mvebu_pwm_probe into the function itself. --- Pending: * Needs ACK from Thierry Reding to be merged via linux-gpio tree by Linus Walleij. --- Andrew Lunn (4): gpio: mvebu: Add limited PWM support mvebu: xp: Add pwm properties to .dtsi files ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 +++ MAINTAINERS | 2 + arch/arm/boot/dts/armada-370.dtsi | 10 +- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 +- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 +- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 +- arch/arm/configs/mvebu_v7_defconfig | 2 + drivers/gpio/gpio-mvebu.c | 291 +++++++++++++++++++-- 9 files changed, 342 insertions(+), 30 deletions(-) -- 2.10.2