Hi,

On Thu, Mar 16, 2017 at 11:05:28AM -0500, Andrew F. Davis wrote:
> To finish the work started in this patch[0] we needed to reorganize
> the 1-wire subsystem a bit, this is done here[1]. After that is taken
> this series can remove the need for a platform driver for supporting
> 1-wire connected BQ27xxx devices.
> 
> Thanks,
> Andrew
> 
> [0] https://patchwork.kernel.org/patch/7684371/
> [1] https://lkml.org/lkml/2017/3/16/604
> 
> Andrew F. Davis (2):
>   power: supply: move HDQ interface for bq27xxx from w1 to power/supply
>   power: supply: bq27xxx: move platform driver code into
>     bq27xxx_battery_hdq.c
> 
>  drivers/power/supply/Kconfig               |   9 ++
>  drivers/power/supply/Makefile              |   1 +
>  drivers/power/supply/bq27xxx_battery.c     | 104 ----------------------
>  drivers/power/supply/bq27xxx_battery_hdq.c | 135 +++++++++++++++++++++++++++++
>  drivers/w1/slaves/Kconfig                  |   6 --
>  drivers/w1/slaves/Makefile                 |   1 -
>  drivers/w1/slaves/w1_bq27000.c             | 117 -------------------------
>  include/linux/power/bq27xxx_battery.h      |  17 ----
>  8 files changed, 145 insertions(+), 245 deletions(-)
>  create mode 100644 drivers/power/supply/bq27xxx_battery_hdq.c
>  delete mode 100644 drivers/w1/slaves/w1_bq27000.c

Acked-by: Sebastian Reichel <sre@kernel.org>

-- Sebastian