From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Date: Mon, 20 Mar 2017 12:40:34 +0100 Subject: [U-Boot] [PATCH 6/8] rockchip: rk3188: Switch to new i2c IP blocks In-Reply-To: <20170320114036.21475-1-heiko@sntech.de> References: <20170320114036.21475-1-heiko@sntech.de> Message-ID: <20170320114036.21475-7-heiko@sntech.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The rk3066/rk3188 introduced new i2c IP blocks but kept the old ones around just in case. The default also points to these old controllers. The "new" blocks proved stable and nobody ever used the old ones anywhere, not in the kernel and not in U-Boot, so to be able to reuse the already existing driver make the rk3188 switch to the new ones in U-Boot as well. Signed-off-by: Heiko Stuebner --- arch/arm/mach-rockchip/rk3188-board-spl.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/mach-rockchip/rk3188-board-spl.c b/arch/arm/mach-rockchip/rk3188-board-spl.c index affd959f86..14847a7b1b 100644 --- a/arch/arm/mach-rockchip/rk3188-board-spl.c +++ b/arch/arm/mach-rockchip/rk3188-board-spl.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -102,6 +103,7 @@ void board_init_f(ulong dummy) { struct udevice *pinctrl, *dev; struct rk3188_pmu *pmu; + struct rk3188_grf *grf; int ret; /* Example code showing how to enable the debug UART on RK3188 */ @@ -154,6 +156,25 @@ void board_init_f(ulong dummy) error("pmu syscon returned %ld\n", PTR_ERR(pmu)); SAVE_SP_ADDR = readl(&pmu->sys_reg[2]); + /* init common grf settings */ + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + if (IS_ERR(grf)) { + error("grf syscon returned %ld\n", PTR_ERR(grf)); + } else { + /* make i2c controllers use the new IP */ + rk_clrsetreg(&grf->soc_con1, + RKI2C4_SEL_MASK << RKI2C4_SEL_SHIFT | + RKI2C3_SEL_MASK << RKI2C3_SEL_SHIFT | + RKI2C2_SEL_MASK << RKI2C2_SEL_SHIFT | + RKI2C1_SEL_MASK << RKI2C1_SEL_SHIFT | + RKI2C0_SEL_MASK << RKI2C0_SEL_SHIFT, + RKI2C4_SEL_MASK << RKI2C4_SEL_SHIFT | + RKI2C3_SEL_MASK << RKI2C3_SEL_SHIFT | + RKI2C2_SEL_MASK << RKI2C2_SEL_SHIFT | + RKI2C1_SEL_MASK << RKI2C1_SEL_SHIFT | + RKI2C0_SEL_MASK << RKI2C0_SEL_SHIFT); + } + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); if (ret) { debug("Pinctrl init failed: %d\n", ret); -- 2.11.0