All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 23/45] net: mvpp2: rework RXQ interrupt group initialization for PPv2.2
Date: Thu, 23 Mar 2017 17:01:49 +0100	[thread overview]
Message-ID: <20170323160211.18072-24-sr@denx.de> (raw)
In-Reply-To: <20170323160211.18072-1-sr@denx.de>

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

This commit adjusts how the MVPP2_ISR_RXQ_GROUP_REG register is
configured, since it changed between PPv2.1 and PPv2.2.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

---

Changes in v2:
- Added Acked-by from Joe
- Rebased on latest patchset version from Thomas available in net-next,
  mostly smaller changes, making checkpatch happy.

 drivers/net/mvpp2.c | 50 +++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 45 insertions(+), 5 deletions(-)

diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index b56af82f92..16a9c75cf0 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -228,7 +228,21 @@ do {									\
 
 /* Interrupt Cause and Mask registers */
 #define MVPP2_ISR_RX_THRESHOLD_REG(rxq)		(0x5200 + 4 * (rxq))
-#define MVPP2_ISR_RXQ_GROUP_REG(rxq)		(0x5400 + 4 * (rxq))
+#define MVPP21_ISR_RXQ_GROUP_REG(rxq)		(0x5400 + 4 * (rxq))
+
+#define MVPP22_ISR_RXQ_GROUP_INDEX_REG          0x5400
+#define MVPP22_ISR_RXQ_GROUP_INDEX_SUBGROUP_MASK 0xf
+#define MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_MASK   0x380
+#define MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_OFFSET 7
+
+#define MVPP22_ISR_RXQ_GROUP_INDEX_SUBGROUP_MASK 0xf
+#define MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_MASK   0x380
+
+#define MVPP22_ISR_RXQ_SUB_GROUP_CONFIG_REG     0x5404
+#define MVPP22_ISR_RXQ_SUB_GROUP_STARTQ_MASK    0x1f
+#define MVPP22_ISR_RXQ_SUB_GROUP_SIZE_MASK      0xf00
+#define MVPP22_ISR_RXQ_SUB_GROUP_SIZE_OFFSET    8
+
 #define MVPP2_ISR_ENABLE_REG(port)		(0x5420 + 4 * (port))
 #define     MVPP2_ISR_ENABLE_INTERRUPT(mask)	((mask) & 0xffff)
 #define     MVPP2_ISR_DISABLE_INTERRUPT(mask)	(((mask) << 16) & 0xffff0000)
@@ -3747,7 +3761,19 @@ static int mvpp2_port_init(struct udevice *dev, struct mvpp2_port *port)
 	}
 
 	/* Configure Rx queue group interrupt for this port */
-	mvpp2_write(priv, MVPP2_ISR_RXQ_GROUP_REG(port->id), CONFIG_MV_ETH_RXQ);
+	if (priv->hw_version == MVPP21) {
+		mvpp2_write(priv, MVPP21_ISR_RXQ_GROUP_REG(port->id),
+			    CONFIG_MV_ETH_RXQ);
+	} else {
+		u32 val;
+
+		val = (port->id << MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_OFFSET);
+		mvpp2_write(priv, MVPP22_ISR_RXQ_GROUP_INDEX_REG, val);
+
+		val = (CONFIG_MV_ETH_RXQ <<
+		       MVPP22_ISR_RXQ_SUB_GROUP_SIZE_OFFSET);
+		mvpp2_write(priv, MVPP22_ISR_RXQ_SUB_GROUP_CONFIG_REG, val);
+	}
 
 	/* Create Rx descriptor rings */
 	for (queue = 0; queue < rxq_number; queue++) {
@@ -4013,9 +4039,23 @@ static int mvpp2_init(struct udevice *dev, struct mvpp2 *priv)
 	mvpp2_rx_fifo_init(priv);
 
 	/* Reset Rx queue group interrupt configuration */
-	for (i = 0; i < MVPP2_MAX_PORTS; i++)
-		mvpp2_write(priv, MVPP2_ISR_RXQ_GROUP_REG(i),
-			    CONFIG_MV_ETH_RXQ);
+	for (i = 0; i < MVPP2_MAX_PORTS; i++) {
+		if (priv->hw_version == MVPP21) {
+			mvpp2_write(priv, MVPP21_ISR_RXQ_GROUP_REG(i),
+				    CONFIG_MV_ETH_RXQ);
+			continue;
+		} else {
+			u32 val;
+
+			val = (i << MVPP22_ISR_RXQ_GROUP_INDEX_GROUP_OFFSET);
+			mvpp2_write(priv, MVPP22_ISR_RXQ_GROUP_INDEX_REG, val);
+
+			val = (CONFIG_MV_ETH_RXQ <<
+			       MVPP22_ISR_RXQ_SUB_GROUP_SIZE_OFFSET);
+			mvpp2_write(priv,
+				    MVPP22_ISR_RXQ_SUB_GROUP_CONFIG_REG, val);
+		}
+	}
 
 	if (priv->hw_version == MVPP21)
 		writel(MVPP2_EXT_GLOBAL_CTRL_DEFAULT,
-- 
2.12.1

  parent reply	other threads:[~2017-03-23 16:01 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-23 16:01 [U-Boot] [PATCH v2 00/45] Add PPv2.2 support to the mvpp2 ethernet driver and enable it for A7k/8k Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 01/45] bitops.h: Include bitsperlong.h as needed for GENMASK_ULL Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 02/45] net: mvpp2: Round up top tx buffer boundaries for dcache ops Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 03/45] net: mvpp2: simplify mvpp2_bm_bufs_add() Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 04/45] net: mvpp2: remove unused register definitions Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 05/45] net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 06/45] net: mvpp2: simplify MVPP2_PRS_RI_* definitions Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 07/45] net: mvpp2: enable building on 64-bit platforms Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 08/45] net: mvpp2: enable building on 64-bit platforms (more U-Boot specific) Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 09/45] net: mvpp2: use "dma" instead of "phys" where appropriate Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 10/45] net: mvpp2: remove support for buffer header Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 11/45] net: mvpp2: store physical address of buffer in rx_desc->buf_cookie Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 12/45] net: mvpp2: add and use accessors for TX/RX descriptors Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 13/45] net: mvpp2: add hw_version field in "struct mvpp2" Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 14/45] net: mvpp2: introduce an intermediate union for the TX/RX descriptors Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 15/45] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 16/45] net: mvpp2: adjust the allocation/free of BM pools for PPv2.2 Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 17/45] net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2 Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 18/45] net: mvpp2: adapt mvpp2_defaults_set() " Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 19/45] net: mvpp2: adjust mvpp2_{rxq, txq}_init for PPv2.2 Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 20/45] net: mvpp2: handle register mapping and access " Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 21/45] net: mvpp2: handle misc PPv2.1/PPv2.2 differences Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 22/45] net: mvpp2: add AXI bridge initialization for PPv2.2 Stefan Roese
2017-03-23 16:01 ` Stefan Roese [this message]
2017-03-23 16:01 ` [U-Boot] [PATCH v2 24/45] net: mvpp2: adapt rxq distribution to PPv2.2 Stefan Roese
2017-03-25 21:24   ` Joe Hershberger
2017-03-23 16:01 ` [U-Boot] [PATCH v2 25/45] net: mvpp2: finally add the PPv2.2 compatible string Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 26/45] net: mvpp2: Add MDIO support for PPv2.2 Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 27/45] net: mvpp2: Move probe function from MISC to ETH DM driver Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 28/45] net: mvpp2.c: Clear all buffer / descriptor areas before usage Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 29/45] net: mvpp2: Enable compilation for Armada 7K/8K platforms Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 30/45] arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 31/45] arm64: mvebu: armada-7k/8k: Enable MVPP2 ethernet driver Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 32/45] net: mvpp2: Handle eth device naming in multi-CP case correctly Stefan Roese
2017-03-23 16:01 ` [U-Boot] [PATCH v2 33/45] net: mvpp2: Add remove function that is called before the OS is started Stefan Roese
2017-03-23 16:02 ` [U-Boot] [PATCH v2 34/45] net: mvpp2: Add RX and TX FIFO configuration for PPv2.2 Stefan Roese
2017-03-25 20:32   ` Joe Hershberger
2017-03-23 16:02 ` [U-Boot] [PATCH v2 35/45] net: include/phy.h: Add new PHY interface modes Stefan Roese
2017-03-23 16:02 ` [U-Boot] [PATCH v2 36/45] net: mvpp2: Restructure probe / init functions Stefan Roese
2017-03-25 21:30   ` Joe Hershberger
2017-03-23 16:02 ` [U-Boot] [PATCH v2 37/45] net: mvpp2: Read phy-speed from DT to select between 1GB and 2.5GB SGMII Stefan Roese
2017-03-25 21:31   ` Joe Hershberger
2017-03-23 16:02 ` [U-Boot] [PATCH v2 38/45] net: mvpp2: Add GoP and NetC support for ports 2 & 3 (RGMII & SGMII) Stefan Roese
2017-03-25 20:05   ` Joe Hershberger
2017-03-27 11:17     ` Stefan Roese
2017-03-23 16:02 ` [U-Boot] [PATCH v2 39/45] net: mvpp2: Add GoP and NetC support for port 0 (SFI) Stefan Roese
2017-03-25 20:16   ` Joe Hershberger
2017-03-23 16:02 ` [U-Boot] [PATCH v2 40/45] net: mvpp2: Add missing PHY_INTERFACE_MODE_RGMII_ID Stefan Roese
2017-03-25 21:34   ` Joe Hershberger
2017-03-23 16:02 ` [U-Boot] [PATCH v2 41/45] net: mvpp2: Enable PHY polling mode on PPv2.2 Stefan Roese
2017-03-23 16:02 ` [U-Boot] [PATCH v2 42/45] net: mvpp2: Configure SMI PHY address needed for PHY polling Stefan Roese
2017-03-23 16:02 ` [U-Boot] [PATCH v2 43/45] net: mvpp2: Remove unreferenced in_use_thresh from struct mvpp2_bm_pool Stefan Roese
2017-03-23 16:02 ` [U-Boot] [PATCH v2 44/45] arm64: mvebu: armada-7040-db.dts: Change eth1 speed from 2.5G to 1G Stefan Roese
2017-03-23 16:02 ` [U-Boot] [PATCH v2 45/45] arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig Stefan Roese
2017-03-25 21:42 ` [U-Boot] [PATCH v2 00/45] Add PPv2.2 support to the mvpp2 ethernet driver and enable it for A7k/8k Joe Hershberger
2017-03-27 12:02   ` Stefan Roese
2017-03-29  9:24 ` Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170323160211.18072-24-sr@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.