All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
To: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Marcel Partap <mpartap-hi6Y0CQ0nG0@public.gmane.org>,
	Michael Scott
	<michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCHv3] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
Date: Sun, 26 Mar 2017 20:25:13 -0700	[thread overview]
Message-ID: <20170327032513.22890-1-tony@atomide.com> (raw)

The custom CPCAP PMIC used on Motorola phones such as Droid 4 has a
USB battery charger. It can optionally also have a companion chip that
is used for wireless charging.

The charger on CPCAP also can feed VBUS for the USB host mode. This
can be handled by the existing kernel phy_companion interface.

Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Marcel Partap <mpartap-hi6Y0CQ0nG0@public.gmane.org>
Cc: Michael Scott <michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---

Changes since v2:

- Update binding based on comments by Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

- Drop "motorola,cpcap-charger" compatible for now as this seems specific
  to the motorola-mapphone

- Update Kconfig for "depends on IIO" and "default MFD_CPCAP"

Changes since v1:

- Fix scaling of IIO values as pointed out by Sebastian Reichel
  <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

- Use iio_read_channel_processed() instead of iio_read_channel_scaled()
  as changed in the v2 of the ADC driver

- Add GPL v2 license header

---
 .../bindings/power/supply/cpcap-charger.txt        |  38 ++
 drivers/power/supply/Kconfig                       |   8 +
 drivers/power/supply/Makefile                      |   1 +
 drivers/power/supply/cpcap-charger.c               | 681 +++++++++++++++++++++
 4 files changed, 728 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
 create mode 100644 drivers/power/supply/cpcap-charger.c

diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
new file mode 100644
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
@@ -0,0 +1,38 @@
+Motorola CPCAP PMIC battery charger binding
+
+Required properties:
+- compatible: Shall be "motorola,cpcap-charger" or
+	      "motorola,mapphone-cpcap-charger"
+- interrupts: Interrupt specifier for each name in interrupt-names
+- interrupt-names: Should contain the following entries:
+		   "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+		   "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"
+- io-channels: IIO ADC channel specifier for each name in io-channel-names
+- io-channel-names: Should contain the following entries:
+		    "battdetb", "battp", "vbus", "chg_isense", "batti"
+
+Optional properties:
+- mode-gpios: Optionally CPCAP charger can have a companion wireless
+	      charge controller that is controlled with two GPIOs
+	      that are active low.
+
+Example:
+
+cpcap_charger: charger {
+	compatible = "motorola,mapphone-cpcap-charger";
+	interrupts-extended = <
+		&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+		&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+	>;
+	interrupt-names =
+		"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+		"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+	mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+		      &gpio3 23 GPIO_ACTIVE_LOW>;
+	io-channels = <&cpcap_adc 0 &cpcap_adc 1
+		       &cpcap_adc 2 &cpcap_adc 5
+		       &cpcap_adc 6>;
+	io-channel-names = "battdetb", "battp",
+			   "vbus", "chg_isense",
+			   "batti";
+};
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -317,6 +317,14 @@ config BATTERY_RX51
 	  Say Y here to enable support for battery information on Nokia
 	  RX-51, also known as N900 tablet.
 
+config CHARGER_CPCAP
+	tristate "CPCAP PMIC Charger Driver"
+	depends on MFD_CPCAP && IIO
+	default MFD_CPCAP
+	help
+	  Say Y to enable support for CPCAP PMIC charger driver for Motorola
+	  mobile devices such as Droid 4.
+
 config CHARGER_ISP1704
 	tristate "ISP1704 USB Charger Detection"
 	depends on USB_PHY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o
 obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
+obj-$(CONFIG_CHARGER_CPCAP)	+= cpcap-charger.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
new file mode 100644
--- /dev/null
+++ b/drivers/power/supply/cpcap-charger.c
@@ -0,0 +1,681 @@
+/*
+ * Motorola CPCAP PMIC battery charger driver
+ *
+ * Copyright (C) 2017 Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
+ *
+ * Rewritten for Linux power framework with some parts based on
+ * on earlier driver found in the Motorola Linux kernel:
+ *
+ * Copyright (C) 2009-2010 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/atomic.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/usb/otg.h>
+#include <linux/iio/consumer.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/* CPCAP_REG_CRM register bits */
+#define CPCAP_REG_CRM_UNUSED_641_15	BIT(15)	/* 641 = register number */
+#define CPCAP_REG_CRM_UNUSED_641_14	BIT(14)	/* 641 = register number */
+#define CPCAP_REG_CRM_CHRG_LED_EN	BIT(13)
+#define CPCAP_REG_CRM_RVRSMODE		BIT(12)
+#define CPCAP_REG_CRM_ICHRG_TR1		BIT(11)
+#define CPCAP_REG_CRM_ICHRG_TR0		BIT(10)
+#define CPCAP_REG_CRM_FET_OVRD		BIT(9)
+#define CPCAP_REG_CRM_FET_CTRL		BIT(8)
+#define CPCAP_REG_CRM_VCHRG3		BIT(7)
+#define CPCAP_REG_CRM_VCHRG2		BIT(6)
+#define CPCAP_REG_CRM_VCHRG1		BIT(5)
+#define CPCAP_REG_CRM_VCHRG0		BIT(4)
+#define CPCAP_REG_CRM_ICHRG3		BIT(3)
+#define CPCAP_REG_CRM_ICHRG2		BIT(2)
+#define CPCAP_REG_CRM_ICHRG1		BIT(1)
+#define CPCAP_REG_CRM_ICHRG0		BIT(0)
+
+/* CPCAP_REG_CRM trickle charge voltages */
+#define CPCAP_REG_CRM_TR(val)		(((val) & 0x3) << 10)
+#define CPCAP_REG_CRM_TR_0A00		CPCAP_REG_CRM_TR(0x0)
+#define CPCAP_REG_CRM_TR_0A24		CPCAP_REG_CRM_TR(0x1)
+#define CPCAP_REG_CRM_TR_0A48		CPCAP_REG_CRM_TR(0x2)
+#define CPCAP_REG_CRM_TR_0A72		CPCAP_REG_CRM_TR(0x4)
+
+/* CPCAP_REG_CRM charge voltages */
+#define CPCAP_REG_CRM_VCHRG(val)	(((val) & 0xf) << 4)
+#define CPCAP_REG_CRM_VCHRG_3V80	CPCAP_REG_CRM_VCHRG(0x0)
+#define CPCAP_REG_CRM_VCHRG_4V10	CPCAP_REG_CRM_VCHRG(0x1)
+#define CPCAP_REG_CRM_VCHRG_4V15	CPCAP_REG_CRM_VCHRG(0x2)
+#define CPCAP_REG_CRM_VCHRG_4V20	CPCAP_REG_CRM_VCHRG(0x3)
+#define CPCAP_REG_CRM_VCHRG_4V22	CPCAP_REG_CRM_VCHRG(0x4)
+#define CPCAP_REG_CRM_VCHRG_4V24	CPCAP_REG_CRM_VCHRG(0x5)
+#define CPCAP_REG_CRM_VCHRG_4V26	CPCAP_REG_CRM_VCHRG(0x6)
+#define CPCAP_REG_CRM_VCHRG_4V28	CPCAP_REG_CRM_VCHRG(0x7)
+#define CPCAP_REG_CRM_VCHRG_4V30	CPCAP_REG_CRM_VCHRG(0x8)
+#define CPCAP_REG_CRM_VCHRG_4V32	CPCAP_REG_CRM_VCHRG(0x9)
+#define CPCAP_REG_CRM_VCHRG_4V34	CPCAP_REG_CRM_VCHRG(0xa)
+#define CPCAP_REG_CRM_VCHRG_4V36	CPCAP_REG_CRM_VCHRG(0xb)
+#define CPCAP_REG_CRM_VCHRG_4V38	CPCAP_REG_CRM_VCHRG(0xc)
+#define CPCAP_REG_CRM_VCHRG_4V40	CPCAP_REG_CRM_VCHRG(0xd)
+#define CPCAP_REG_CRM_VCHRG_4V42	CPCAP_REG_CRM_VCHRG(0xe)
+#define CPCAP_REG_CRM_VCHRG_4V44	CPCAP_REG_CRM_VCHRG(0xf)
+
+/* CPCAP_REG_CRM charge currents */
+#define CPCAP_REG_CRM_ICHRG(val)	(((val) & 0xf) << 0)
+#define CPCAP_REG_CRM_ICHRG_0A000	CPCAP_REG_CRM_ICHRG(0x0)
+#define CPCAP_REG_CRM_ICHRG_0A070	CPCAP_REG_CRM_ICHRG(0x1)
+#define CPCAP_REG_CRM_ICHRG_0A176	CPCAP_REG_CRM_ICHRG(0x2)
+#define CPCAP_REG_CRM_ICHRG_0A264	CPCAP_REG_CRM_ICHRG(0x3)
+#define CPCAP_REG_CRM_ICHRG_0A352	CPCAP_REG_CRM_ICHRG(0x4)
+#define CPCAP_REG_CRM_ICHRG_0A440	CPCAP_REG_CRM_ICHRG(0x5)
+#define CPCAP_REG_CRM_ICHRG_0A528	CPCAP_REG_CRM_ICHRG(0x6)
+#define CPCAP_REG_CRM_ICHRG_0A616	CPCAP_REG_CRM_ICHRG(0x7)
+#define CPCAP_REG_CRM_ICHRG_0A704	CPCAP_REG_CRM_ICHRG(0x8)
+#define CPCAP_REG_CRM_ICHRG_0A792	CPCAP_REG_CRM_ICHRG(0x9)
+#define CPCAP_REG_CRM_ICHRG_0A880	CPCAP_REG_CRM_ICHRG(0xa)
+#define CPCAP_REG_CRM_ICHRG_0A968	CPCAP_REG_CRM_ICHRG(0xb)
+#define CPCAP_REG_CRM_ICHRG_1A056	CPCAP_REG_CRM_ICHRG(0xc)
+#define CPCAP_REG_CRM_ICHRG_1A144	CPCAP_REG_CRM_ICHRG(0xd)
+#define CPCAP_REG_CRM_ICHRG_1A584	CPCAP_REG_CRM_ICHRG(0xe)
+#define CPCAP_REG_CRM_ICHRG_NO_LIMIT	CPCAP_REG_CRM_ICHRG(0xf)
+
+enum {
+	CPCAP_CHARGER_IIO_BATTDET,
+	CPCAP_CHARGER_IIO_VOLTAGE,
+	CPCAP_CHARGER_IIO_VBUS,
+	CPCAP_CHARGER_IIO_CHRG_CURRENT,
+	CPCAP_CHARGER_IIO_BATT_CURRENT,
+	CPCAP_CHARGER_IIO_NR,
+};
+
+struct cpcap_charger_ddata {
+	struct device *dev;
+	struct regmap *reg;
+	struct list_head irq_list;
+	struct delayed_work detect_work;
+	struct delayed_work vbus_work;
+	struct gpio_desc *gpio[2];		/* gpio_reven0 & 1 */
+
+	struct iio_channel *channels[CPCAP_CHARGER_IIO_NR];
+
+	struct power_supply *usb;
+
+	struct phy_companion comparator;	/* For USB VBUS */
+	bool vbus_enabled;
+	atomic_t active;
+
+	int status;
+};
+
+struct cpcap_interrupt_desc {
+	int irq;
+	struct list_head node;
+	const char *name;
+};
+
+struct cpcap_charger_ints_state {
+	bool chrg_det;
+	bool rvrs_chrg;
+	bool vbusov;
+
+	bool chrg_se1b;
+	bool rvrs_mode;
+	bool chrgcurr1;
+	bool vbusvld;
+
+	bool battdetb;
+};
+
+static enum power_supply_property cpcap_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static bool cpcap_charger_battery_found(struct cpcap_charger_ddata *ddata)
+{
+	struct iio_channel *channel;
+	int error, value;
+
+	channel = ddata->channels[CPCAP_CHARGER_IIO_BATTDET];
+	error = iio_read_channel_raw(channel, &value);
+	if (error < 0) {
+		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+		return false;
+	}
+
+	return value == 1;
+}
+
+static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata)
+{
+	struct iio_channel *channel;
+	int error, value = 0;
+
+	channel = ddata->channels[CPCAP_CHARGER_IIO_VOLTAGE];
+	error = iio_read_channel_processed(channel, &value);
+	if (error < 0) {
+		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+		return 0;
+	}
+
+	return value;
+}
+
+static int cpcap_charger_get_charge_current(struct cpcap_charger_ddata *ddata)
+{
+	struct iio_channel *channel;
+	int error, value = 0;
+
+	channel = ddata->channels[CPCAP_CHARGER_IIO_CHRG_CURRENT];
+	error = iio_read_channel_processed(channel, &value);
+	if (error < 0) {
+		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+		return 0;
+	}
+
+	return value;
+}
+
+static int cpcap_charger_get_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      union power_supply_propval *val)
+{
+	struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = ddata->status;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
+			val->intval = cpcap_charger_get_charge_voltage(ddata) *
+				1000;
+		else
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
+			val->intval = cpcap_charger_get_charge_current(ddata) *
+				1000;
+		else
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = ddata->status == POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void cpcap_charger_set_cable_path(struct cpcap_charger_ddata *ddata,
+					 bool enabled)
+{
+	if (!ddata->gpio[0])
+		return;
+
+	gpiod_set_value(ddata->gpio[0], enabled);
+}
+
+static void cpcap_charger_set_inductive_path(struct cpcap_charger_ddata *ddata,
+					     bool enabled)
+{
+	if (!ddata->gpio[1])
+		return;
+
+	gpiod_set_value(ddata->gpio[1], enabled);
+}
+
+static int cpcap_charger_set_state(struct cpcap_charger_ddata *ddata,
+				   int max_voltage, int charge_current,
+				   int trickle_current)
+{
+	bool enable;
+	int error;
+
+	enable = max_voltage && (charge_current || trickle_current);
+	dev_dbg(ddata->dev, "%s enable: %i\n", __func__, enable);
+
+	if (!enable) {
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+					   0x3fff,
+					   CPCAP_REG_CRM_FET_OVRD |
+					   CPCAP_REG_CRM_FET_CTRL);
+		if (error) {
+			ddata->status = POWER_SUPPLY_STATUS_UNKNOWN;
+			goto out_err;
+		}
+
+		ddata->status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+		return 0;
+	}
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff,
+				   CPCAP_REG_CRM_CHRG_LED_EN |
+				   trickle_current |
+				   CPCAP_REG_CRM_FET_OVRD |
+				   CPCAP_REG_CRM_FET_CTRL |
+				   max_voltage |
+				   charge_current);
+	if (error) {
+		ddata->status = POWER_SUPPLY_STATUS_UNKNOWN;
+		goto out_err;
+	}
+
+	ddata->status = POWER_SUPPLY_STATUS_CHARGING;
+
+	return 0;
+
+out_err:
+	dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+	return error;
+}
+
+static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata)
+{
+	int error, value = 0;
+	struct iio_channel *channel =
+		ddata->channels[CPCAP_CHARGER_IIO_VBUS];
+
+	error = iio_read_channel_processed(channel, &value);
+	if (error >= 0)
+		return value > 3900 ? true : false;
+
+	dev_err(ddata->dev, "error reading VBUS: %i\n", error);
+
+	return false;
+}
+
+/* VBUS control functions for the USB PHY companion */
+
+static void cpcap_charger_vbus_work(struct work_struct *work)
+{
+	struct cpcap_charger_ddata *ddata;
+	bool vbus = false;
+	int error;
+
+	ddata = container_of(work, struct cpcap_charger_ddata,
+			     vbus_work.work);
+
+	if (ddata->vbus_enabled) {
+		vbus = cpcap_charger_vbus_valid(ddata);
+		if (vbus) {
+			dev_info(ddata->dev, "VBUS already provided\n");
+
+			return;
+		}
+
+		cpcap_charger_set_cable_path(ddata, false);
+		cpcap_charger_set_inductive_path(ddata, false);
+
+		error = cpcap_charger_set_state(ddata, 0, 0, 0);
+		if (error)
+			goto out_err;
+
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+					   CPCAP_REG_CRM_RVRSMODE,
+					   CPCAP_REG_CRM_RVRSMODE);
+		if (error)
+			goto out_err;
+	} else {
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+					   CPCAP_REG_CRM_RVRSMODE, 0);
+		if (error)
+			goto out_err;
+
+		cpcap_charger_set_cable_path(ddata, true);
+		cpcap_charger_set_inductive_path(ddata, true);
+	}
+
+	return;
+
+out_err:
+	dev_err(ddata->dev, "%s could not %s vbus: %i\n", __func__,
+		ddata->vbus_enabled ? "enable" : "disable", error);
+}
+
+static int cpcap_charger_set_vbus(struct phy_companion *comparator,
+				  bool enabled)
+{
+	struct cpcap_charger_ddata *ddata =
+		container_of(comparator, struct cpcap_charger_ddata,
+			     comparator);
+
+	ddata->vbus_enabled = enabled;
+	schedule_delayed_work(&ddata->vbus_work, 0);
+
+	return 0;
+}
+
+/* Charger interrupt handling functions */
+
+static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata,
+					struct cpcap_charger_ints_state *s)
+{
+	int val, error;
+
+	error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val);
+	if (error)
+		return error;
+
+	s->chrg_det = val & BIT(13);
+	s->rvrs_chrg = val & BIT(12);
+	s->vbusov = val & BIT(11);
+
+	error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val);
+	if (error)
+		return error;
+
+	s->chrg_se1b = val & BIT(13);
+	s->rvrs_mode = val & BIT(6);
+	s->chrgcurr1 = val & BIT(4);
+	s->vbusvld = val & BIT(3);
+
+	error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val);
+	if (error)
+		return error;
+
+	s->battdetb = val & BIT(6);
+
+	return 0;
+}
+
+static void cpcap_usb_detect(struct work_struct *work)
+{
+	struct cpcap_charger_ddata *ddata;
+	struct cpcap_charger_ints_state s;
+	int error;
+
+	ddata = container_of(work, struct cpcap_charger_ddata,
+			     detect_work.work);
+
+	error = cpcap_charger_get_ints_state(ddata, &s);
+	if (error)
+		return;
+
+	if (cpcap_charger_vbus_valid(ddata) && s.chrgcurr1) {
+		int max_current;
+
+		if (cpcap_charger_battery_found(ddata))
+			max_current = CPCAP_REG_CRM_ICHRG_1A584;
+		else
+			max_current = CPCAP_REG_CRM_ICHRG_0A528;
+
+		error = cpcap_charger_set_state(ddata,
+						CPCAP_REG_CRM_VCHRG_4V20,
+						max_current,
+						CPCAP_REG_CRM_TR_0A72);
+		if (error)
+			goto out_err;
+	} else {
+		error = cpcap_charger_set_state(ddata, 0, 0, 0);
+		if (error)
+			goto out_err;
+	}
+
+	return;
+
+out_err:
+	dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+}
+
+static irqreturn_t cpcap_charger_irq_thread(int irq, void *data)
+{
+	struct cpcap_charger_ddata *ddata = data;
+
+	if (!atomic_read(&ddata->active))
+		return IRQ_NONE;
+
+	schedule_delayed_work(&ddata->detect_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int cpcap_usb_init_irq(struct platform_device *pdev,
+			      struct cpcap_charger_ddata *ddata,
+			      const char *name)
+{
+	struct cpcap_interrupt_desc *d;
+	int irq, error;
+
+	irq = platform_get_irq_byname(pdev, name);
+	if (!irq)
+		return -ENODEV;
+
+	error = devm_request_threaded_irq(ddata->dev, irq, NULL,
+					  cpcap_charger_irq_thread,
+					  IRQF_SHARED,
+					  name, ddata);
+	if (error) {
+		dev_err(ddata->dev, "could not get irq %s: %i\n",
+			name, error);
+
+		return error;
+	}
+
+	d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	d->name = name;
+	d->irq = irq;
+	list_add(&d->node, &ddata->irq_list);
+
+	return 0;
+}
+
+static const char * const cpcap_charger_irqs[] = {
+	/* REG_INT_0 */
+	"chrg_det", "rvrs_chrg",
+
+	/* REG_INT1 */
+	"chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr1", "vbusvld",
+
+	/* REG_INT_3 */
+	"battdetb",
+};
+
+static int cpcap_usb_init_interrupts(struct platform_device *pdev,
+				     struct cpcap_charger_ddata *ddata)
+{
+	int i, error;
+
+	for (i = 0; i < ARRAY_SIZE(cpcap_charger_irqs); i++) {
+		error = cpcap_usb_init_irq(pdev, ddata, cpcap_charger_irqs[i]);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+static void cpcap_charger_init_optional_gpios(struct cpcap_charger_ddata *ddata)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode",
+						      i, GPIOD_OUT_HIGH);
+		if (IS_ERR(ddata->gpio[i])) {
+			dev_info(ddata->dev, "no mode change GPIO%i: %li\n",
+				 i, PTR_ERR(ddata->gpio[i]));
+				 ddata->gpio[i] = NULL;
+		}
+	}
+}
+
+static int cpcap_charger_init_iio(struct cpcap_charger_ddata *ddata)
+{
+	const char * const names[CPCAP_CHARGER_IIO_NR] = {
+		"battdetb", "battp", "vbus", "chg_isense", "batti",
+	};
+	int error, i;
+
+	for (i = 0; i < CPCAP_CHARGER_IIO_NR; i++) {
+		ddata->channels[i] = devm_iio_channel_get(ddata->dev,
+							  names[i]);
+		if (IS_ERR(ddata->channels[i])) {
+			error = PTR_ERR(ddata->channels[i]);
+			goto out_err;
+		}
+
+		if (!ddata->channels[i]->indio_dev) {
+			error = -ENXIO;
+			goto out_err;
+		}
+	}
+
+	return 0;
+
+out_err:
+	dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n",
+		error);
+
+	return error;
+}
+
+static const struct power_supply_desc cpcap_charger_usb_desc = {
+	.name		= "cpcap_usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= cpcap_charger_props,
+	.num_properties	= ARRAY_SIZE(cpcap_charger_props),
+	.get_property	= cpcap_charger_get_property,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id cpcap_charger_id_table[] = {
+	{
+		.compatible = "motorola,mapphone-cpcap-charger",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, cpcap_charger_id_table);
+#endif
+
+static int cpcap_charger_probe(struct platform_device *pdev)
+{
+	struct cpcap_charger_ddata *ddata;
+	const struct of_device_id *of_id;
+	int error;
+
+	of_id = of_match_device(of_match_ptr(cpcap_charger_id_table),
+				&pdev->dev);
+	if (!of_id)
+		return -EINVAL;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->dev = &pdev->dev;
+
+	ddata->reg = dev_get_regmap(ddata->dev->parent, NULL);
+	if (!ddata->reg)
+		return -ENODEV;
+
+	INIT_LIST_HEAD(&ddata->irq_list);
+	INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect);
+	INIT_DELAYED_WORK(&ddata->vbus_work, cpcap_charger_vbus_work);
+	platform_set_drvdata(pdev, ddata);
+
+	error = cpcap_charger_init_iio(ddata);
+	if (error)
+		return error;
+
+	atomic_set(&ddata->active, 1);
+
+	ddata->usb = devm_power_supply_register(ddata->dev,
+						&cpcap_charger_usb_desc,
+						NULL);
+	if (IS_ERR(ddata->usb)) {
+		error = PTR_ERR(ddata->usb);
+		dev_err(ddata->dev, "failed to register USB charger: %i\n",
+			error);
+
+		return error;
+	}
+
+	error = cpcap_usb_init_interrupts(pdev, ddata);
+	if (error)
+		return error;
+
+	ddata->comparator.set_vbus = cpcap_charger_set_vbus;
+	error = omap_usb2_set_comparator(&ddata->comparator);
+	if (error == -ENODEV) {
+		dev_info(ddata->dev, "charger needs phy, deferring probe\n");
+		return -EPROBE_DEFER;
+	}
+
+	cpcap_charger_init_optional_gpios(ddata);
+
+	schedule_delayed_work(&ddata->detect_work, 0);
+
+	return 0;
+}
+
+static int cpcap_charger_remove(struct platform_device *pdev)
+{
+	struct cpcap_charger_ddata *ddata = platform_get_drvdata(pdev);
+	int error;
+
+	atomic_set(&ddata->active, 0);
+	error = omap_usb2_set_comparator(NULL);
+	if (error)
+		dev_warn(ddata->dev, "could not clear USB comparator: %i\n",
+			 error);
+
+	error = cpcap_charger_set_state(ddata, 0, 0, 0);
+	if (error)
+		dev_warn(ddata->dev, "could not clear charger: %i\n",
+			 error);
+	cancel_delayed_work_sync(&ddata->vbus_work);
+	cancel_delayed_work_sync(&ddata->detect_work);
+
+	return 0;
+}
+
+static struct platform_driver cpcap_charger_driver = {
+	.probe = cpcap_charger_probe,
+	.driver	= {
+		.name	= "cpcap-charger",
+		.of_match_table = of_match_ptr(cpcap_charger_id_table),
+	},
+	.remove	= cpcap_charger_remove,
+};
+module_platform_driver(cpcap_charger_driver);
+
+MODULE_AUTHOR("Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>");
+MODULE_DESCRIPTION("CPCAP Battery Charger Interface driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cpcap-charger");
-- 
2.12.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2017-03-27  3:25 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-27  3:25 Tony Lindgren [this message]
2017-03-30 23:24 ` [PATCHv3] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger Rob Herring
     [not found] ` <20170327032513.22890-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-04-11 15:28   ` Sebastian Reichel
2017-04-11 15:31     ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170327032513.22890-1-tony@atomide.com \
    --to=tony-4v6ys6ai5vpbdgjk7y7tuq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=mpartap-hi6Y0CQ0nG0@public.gmane.org \
    --cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.