BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with the Ethernet replaced by a TI wl1835 wireless module. This board can be indentified by the BWAx value after A335BNLT (BBB) in the at24 eeprom: BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|] http://beagleboard.org/black-wireless https://github.com/beagleboard/beaglebone-black-wireless firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tom Rini <trini@konsulko.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Will Newton <willn@resin.io> --- board/ti/am335x/board.c | 7 +++++++ include/configs/am335x_evm.h | 2 ++ 2 files changed, 9 insertions(+) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 8eaf3e9a5c..304ae34fb7 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -651,6 +651,13 @@ int board_late_init(void) #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG char *name = NULL; + if (board_is_bone_lt()) { + /* BeagleBoard.org BeagleBone Black Wireless: */ + if (!strncmp(board_ti_get_rev(), "BWA", 3)) { + name = "BBBW"; + } + } + if (board_is_bbg1()) name = "BBG1"; set_board_info_env(name); diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 27126871f7..dcac2f5816 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -138,6 +138,8 @@ "setenv fdtfile am335x-bone.dtb; fi; " \ "if test $board_name = A335BNLT; then " \ "setenv fdtfile am335x-boneblack.dtb; fi; " \ + "if test $board_name = BBBW; then " \ + "setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \ "if test $board_name = BBG1; then " \ "setenv fdtfile am335x-bonegreen.dtb; fi; " \ "if test $board_name = A33515BB; then " \ -- 2.11.0
SeeedStudio BeagleBone Green Wireless (BBGW) is an expansion of the SeeedStudio Green (BBG) with the Ethernet replaced by a TI wl1835 wireless module. This board can be indentified by the GW1x value after A335BNLT (BBB) in the at24 eeprom: GW1x [aa 55 33 ee 41 33 33 35 42 4e 4c 54 47 57 31 41 |.U3.A335BNLTGW1A|] http://beagleboard.org/green-wireless http://wiki.seeed.cc/BeagleBone_Green_Wireless/ firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware wl18xx mac address: Stored in at24 eeprom at address 5-16: hexdump -e '8/1 "%c"' /sys/bus/i2c/devices/0-0050/eeprom | cut -b 5-16 Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tom Rini <trini@konsulko.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Will Newton <willn@resin.io> --- board/ti/am335x/board.c | 4 ++++ include/configs/am335x_evm.h | 2 ++ 2 files changed, 6 insertions(+) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 304ae34fb7..54589638b3 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -656,6 +656,10 @@ int board_late_init(void) if (!strncmp(board_ti_get_rev(), "BWA", 3)) { name = "BBBW"; } + /* SeeedStudio BeagleBone Green Wireless */ + if (!strncmp(board_ti_get_rev(), "GW1", 3)) { + name = "BBGW"; + } } if (board_is_bbg1()) diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index dcac2f5816..d90c5156d3 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -142,6 +142,8 @@ "setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \ "if test $board_name = BBG1; then " \ "setenv fdtfile am335x-bonegreen.dtb; fi; " \ + "if test $board_name = BBGW; then " \ + "setenv fdtfile am335x-bonegreen-wireless.dtb; fi; " \ "if test $board_name = A33515BB; then " \ "setenv fdtfile am335x-evm.dtb; fi; " \ "if test $board_name = A335X_SK; then " \ -- 2.11.0
BeagleBone Blue is next grenation of boards from BeagleBoard.org, focusing on robotics with a TI wl1835 wireless module for connectivity. This board can be indentified by the BLAx value after A335BNLT (BBB) in the at24 eeprom: BLAx: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|] http://beagleboard.org/blue https://github.com/beagleboard/beaglebone-blue firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tom Rini <trini@konsulko.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Will Newton <willn@resin.io> --- board/ti/am335x/board.c | 4 ++++ include/configs/am335x_evm.h | 2 ++ 2 files changed, 6 insertions(+) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 54589638b3..3e842d3187 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -660,6 +660,10 @@ int board_late_init(void) if (!strncmp(board_ti_get_rev(), "GW1", 3)) { name = "BBGW"; } + /* BeagleBoard.org BeagleBone Blue */ + if (!strncmp(board_ti_get_rev(), "BLA", 3)) { + name = "BBBL"; + } } if (board_is_bbg1()) diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index d90c5156d3..5fbc1e3ff9 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -144,6 +144,8 @@ "setenv fdtfile am335x-bonegreen.dtb; fi; " \ "if test $board_name = BBGW; then " \ "setenv fdtfile am335x-bonegreen-wireless.dtb; fi; " \ + "if test $board_name = BBBL; then " \ + "setenv fdtfile am335x-boneblue.dtb; fi; " \ "if test $board_name = A33515BB; then " \ "setenv fdtfile am335x-evm.dtb; fi; " \ "if test $board_name = A335X_SK; then " \ -- 2.11.0
fyi: these are board only, SPL/device tree will need a bigger resync on am33xx from kernel.rog Regards, On Thu, Mar 30, 2017 at 2:29 PM, Robert Nelson <robertcnelson@gmail.com> wrote: > BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with > the Ethernet replaced by a TI wl1835 wireless module. > > This board can be indentified by the BWAx value after A335BNLT (BBB) > in the at24 eeprom: > BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|] > > http://beagleboard.org/black-wireless > https://github.com/beagleboard/beaglebone-black-wireless > > firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware > wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Tom Rini <trini@konsulko.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Will Newton <willn@resin.io> > --- > board/ti/am335x/board.c | 7 +++++++ > include/configs/am335x_evm.h | 2 ++ > 2 files changed, 9 insertions(+) > > diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c > index 8eaf3e9a5c..304ae34fb7 100644 > --- a/board/ti/am335x/board.c > +++ b/board/ti/am335x/board.c > @@ -651,6 +651,13 @@ int board_late_init(void) > #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > char *name = NULL; > > + if (board_is_bone_lt()) { > + /* BeagleBoard.org BeagleBone Black Wireless: */ > + if (!strncmp(board_ti_get_rev(), "BWA", 3)) { > + name = "BBBW"; > + } > + } > + > if (board_is_bbg1()) > name = "BBG1"; > set_board_info_env(name); > diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h > index 27126871f7..dcac2f5816 100644 > --- a/include/configs/am335x_evm.h > +++ b/include/configs/am335x_evm.h > @@ -138,6 +138,8 @@ > "setenv fdtfile am335x-bone.dtb; fi; " \ > "if test $board_name = A335BNLT; then " \ > "setenv fdtfile am335x-boneblack.dtb; fi; " \ > + "if test $board_name = BBBW; then " \ > + "setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \ > "if test $board_name = BBG1; then " \ > "setenv fdtfile am335x-bonegreen.dtb; fi; " \ > "if test $board_name = A33515BB; then " \ > -- > 2.11.0 > -- Robert Nelson https://rcn-ee.com/
On Thu, Mar 30, 2017 at 02:29:52PM -0500, Robert Nelson wrote: > BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with > the Ethernet replaced by a TI wl1835 wireless module. > > This board can be indentified by the BWAx value after A335BNLT (BBB) > in the at24 eeprom: > BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|] > > http://beagleboard.org/black-wireless > https://github.com/beagleboard/beaglebone-black-wireless > > firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware > wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Tom Rini <trini@konsulko.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Will Newton <willn@resin.io> Reviewed-by: Tom Rini <trini@konsulko.com> -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170404/0ac08c2e/attachment.sig>
On Thu, Mar 30, 2017 at 02:29:53PM -0500, Robert Nelson wrote: > SeeedStudio BeagleBone Green Wireless (BBGW) is an expansion of the > SeeedStudio Green (BBG) with the Ethernet replaced by a TI wl1835 > wireless module. > > This board can be indentified by the GW1x value after A335BNLT (BBB) > in the at24 eeprom: > GW1x [aa 55 33 ee 41 33 33 35 42 4e 4c 54 47 57 31 41 |.U3.A335BNLTGW1A|] > > http://beagleboard.org/green-wireless > http://wiki.seeed.cc/BeagleBone_Green_Wireless/ > > firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware > wl18xx mac address: Stored in at24 eeprom at address 5-16: > hexdump -e '8/1 "%c"' /sys/bus/i2c/devices/0-0050/eeprom | cut -b 5-16 > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Tom Rini <trini@konsulko.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Will Newton <willn@resin.io> Reviewed-by: Tom Rini <trini@konsulko.com> -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170404/a484cb6d/attachment.sig>
On Thu, Mar 30, 2017 at 02:29:54PM -0500, Robert Nelson wrote: > BeagleBone Blue is next grenation of boards from BeagleBoard.org, focusing > on robotics with a TI wl1835 wireless module for connectivity. > > This board can be indentified by the BLAx value after A335BNLT (BBB) > in the at24 eeprom: > BLAx: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|] > > http://beagleboard.org/blue > https://github.com/beagleboard/beaglebone-blue > > firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware > wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Tom Rini <trini@konsulko.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Will Newton <willn@resin.io> Reviewed-by: Tom Rini <trini@konsulko.com> -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170404/57dc8699/attachment.sig>
"On Thu, Mar 30, 2017 at 8:29 PM, Robert Nelson <robertcnelson@gmail.com> wrote: > BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with > the Ethernet replaced by a TI wl1835 wireless module. > > This board can be indentified by the BWAx value after A335BNLT (BBB) > in the at24 eeprom: > BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|] > > http://beagleboard.org/black-wireless > https://github.com/beagleboard/beaglebone-black-wireless > > firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware > wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Tom Rini <trini@konsulko.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Will Newton <willn@resin.io> > --- > board/ti/am335x/board.c | 7 +++++++ > include/configs/am335x_evm.h | 2 ++ Shouldn't this also update "CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"" in configs/am335x_evm_defconfig ans possibly other am33xx_ configs? Peter > diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c > index 8eaf3e9a5c..304ae34fb7 100644 > --- a/board/ti/am335x/board.c > +++ b/board/ti/am335x/board.c > @@ -651,6 +651,13 @@ int board_late_init(void) > #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > char *name = NULL; > > + if (board_is_bone_lt()) { > + /* BeagleBoard.org BeagleBone Black Wireless: */ > + if (!strncmp(board_ti_get_rev(), "BWA", 3)) { > + name = "BBBW"; > + } > + } > + > if (board_is_bbg1()) > name = "BBG1"; > set_board_info_env(name); > diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h > index 27126871f7..dcac2f5816 100644 > --- a/include/configs/am335x_evm.h > +++ b/include/configs/am335x_evm.h > @@ -138,6 +138,8 @@ > "setenv fdtfile am335x-bone.dtb; fi; " \ > "if test $board_name = A335BNLT; then " \ > "setenv fdtfile am335x-boneblack.dtb; fi; " \ > + "if test $board_name = BBBW; then " \ > + "setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \ > "if test $board_name = BBG1; then " \ > "setenv fdtfile am335x-bonegreen.dtb; fi; " \ > "if test $board_name = A33515BB; then " \ > -- > 2.11.0 > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot
On Wed, Apr 5, 2017 at 11:14 AM, Peter Robinson <pbrobinson@gmail.com> wrote: > "On Thu, Mar 30, 2017 at 8:29 PM, Robert Nelson <robertcnelson@gmail.com> wrote: >> BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with >> the Ethernet replaced by a TI wl1835 wireless module. >> >> This board can be indentified by the BWAx value after A335BNLT (BBB) >> in the at24 eeprom: >> BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|] >> >> http://beagleboard.org/black-wireless >> https://github.com/beagleboard/beaglebone-black-wireless >> >> firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware >> wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address >> >> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> >> CC: Tom Rini <trini@konsulko.com> >> CC: Jason Kridner <jkridner@beagleboard.org> >> CC: Will Newton <willn@resin.io> >> --- >> board/ti/am335x/board.c | 7 +++++++ >> include/configs/am335x_evm.h | 2 ++ > > Shouldn't this also update "CONFIG_OF_LIST="am335x-evm am335x-bone > am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"" in > configs/am335x_evm_defconfig ans possibly other am33xx_ configs? Hi Peter, Currently these patches rely on "CONFIG_OF_CONTROL" being disabled (non-device-tree boot, aka the old boot method), after we resync with kernel.org's ti/omap device tree changes. We can go back and enable device-tree boot for these new devices. Regards, -- Robert Nelson https://rcn-ee.com/
On Wed, Apr 5, 2017 at 11:50 AM, Robert Nelson <robertcnelson@gmail.com> wrote: > On Wed, Apr 5, 2017 at 11:14 AM, Peter Robinson <pbrobinson@gmail.com> wrote: >> "On Thu, Mar 30, 2017 at 8:29 PM, Robert Nelson <robertcnelson@gmail.com> wrote: >>> BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with >>> the Ethernet replaced by a TI wl1835 wireless module. >>> >>> This board can be indentified by the BWAx value after A335BNLT (BBB) >>> in the at24 eeprom: >>> BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|] >>> >>> http://beagleboard.org/black-wireless >>> https://github.com/beagleboard/beaglebone-black-wireless >>> >>> firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware >>> wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address >>> >>> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> >>> CC: Tom Rini <trini@konsulko.com> >>> CC: Jason Kridner <jkridner@beagleboard.org> >>> CC: Will Newton <willn@resin.io> >>> --- >>> board/ti/am335x/board.c | 7 +++++++ >>> include/configs/am335x_evm.h | 2 ++ >> >> Shouldn't this also update "CONFIG_OF_LIST="am335x-evm am335x-bone >> am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"" in >> configs/am335x_evm_defconfig ans possibly other am33xx_ configs? > > Hi Peter, > > Currently these patches rely on "CONFIG_OF_CONTROL" being disabled > (non-device-tree boot, aka the old boot method), after we resync with > kernel.org's ti/omap device tree changes. We can go back and enable > device-tree boot for these new devices. and side note, with CONFIG_OF_CONTROL enabled with these patches, they'll still just use "am335x-boneblack.dtb" in spl/device-tree boot mode.. Since they share the black's eeprom base identifier. Regards, -- Robert Nelson https://rcn-ee.com/
On Thu, Mar 30, 2017 at 02:29:52PM -0500, robertcnelson at gmail.com wrote: > BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with > the Ethernet replaced by a TI wl1835 wireless module. > > This board can be indentified by the BWAx value after A335BNLT (BBB) > in the at24 eeprom: > BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|] > > http://beagleboard.org/black-wireless > https://github.com/beagleboard/beaglebone-black-wireless > > firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware > wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Tom Rini <trini@konsulko.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Will Newton <willn@resin.io> > Reviewed-by: Tom Rini <trini@konsulko.com> Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170408/91f4eb91/attachment.sig>
On Thu, Mar 30, 2017 at 02:29:53PM -0500, robertcnelson at gmail.com wrote: > SeeedStudio BeagleBone Green Wireless (BBGW) is an expansion of the > SeeedStudio Green (BBG) with the Ethernet replaced by a TI wl1835 > wireless module. > > This board can be indentified by the GW1x value after A335BNLT (BBB) > in the at24 eeprom: > GW1x [aa 55 33 ee 41 33 33 35 42 4e 4c 54 47 57 31 41 |.U3.A335BNLTGW1A|] > > http://beagleboard.org/green-wireless > http://wiki.seeed.cc/BeagleBone_Green_Wireless/ > > firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware > wl18xx mac address: Stored in at24 eeprom at address 5-16: > hexdump -e '8/1 "%c"' /sys/bus/i2c/devices/0-0050/eeprom | cut -b 5-16 > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Tom Rini <trini@konsulko.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Will Newton <willn@resin.io> > Reviewed-by: Tom Rini <trini@konsulko.com> Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170408/7acf705f/attachment.sig>
On Thu, Mar 30, 2017 at 02:29:54PM -0500, robertcnelson at gmail.com wrote: > BeagleBone Blue is next grenation of boards from BeagleBoard.org, focusing > on robotics with a TI wl1835 wireless module for connectivity. > > This board can be indentified by the BLAx value after A335BNLT (BBB) > in the at24 eeprom: > BLAx: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|] > > http://beagleboard.org/blue > https://github.com/beagleboard/beaglebone-blue > > firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware > wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Tom Rini <trini@konsulko.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Will Newton <willn@resin.io> > Reviewed-by: Tom Rini <trini@konsulko.com> Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170408/03f52a4a/attachment.sig>