From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932763AbdCaHl1 (ORCPT ); Fri, 31 Mar 2017 03:41:27 -0400 Received: from mail-wr0-f195.google.com ([209.85.128.195]:34249 "EHLO mail-wr0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932522AbdCaHlZ (ORCPT ); Fri, 31 Mar 2017 03:41:25 -0400 From: Ralph Sennhauser To: linux-arm-kernel@lists.infradead.org Cc: Ralph Sennhauser , Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Mark Rutland , Russell King , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] ARM: dts: armada-38x: label USB and SATA nodes Date: Fri, 31 Mar 2017 09:41:15 +0200 Message-Id: <20170331074115.8111-1-ralph.sennhauser@gmail.com> X-Mailer: git-send-email 2.10.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Recently most nodes got labels to make them referenceable. The USB 3.0 nodes as well as the nodes for the SATA controllers were left out, rectify the omission. Signed-off-by: Ralph Sennhauser --- Hi everybody In preparation to add support for the Linksys WRT3200ACM (Rango) some rework of the "dts-stack" is highly desirable. This patch is part of the preparatory work but independent. The label for the USB 2.0 port is "usb0:", so using "usb1:" and "usb2:" would be the logical continuation. Guess you realized the catch already, "usb2:" for an USB 3.0 controller might be very confusing. I'm sending this patch ahead of the rest so the labels can be discussed and finalized. Ralph --- arch/arm/boot/dts/armada-38x.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index ba27ec1..78c838a 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -530,7 +530,7 @@ interrupts = ; }; - sata@a8000 { + satac0: sata@a8000 { compatible = "marvell,armada-380-ahci"; reg = <0xa8000 0x2000>; interrupts = ; @@ -546,7 +546,7 @@ status = "disabled"; }; - sata@e0000 { + satac1: sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; interrupts = ; @@ -590,7 +590,7 @@ status = "disabled"; }; - usb3@f0000 { + usb3_0: usb3@f0000 { compatible = "marvell,armada-380-xhci"; reg = <0xf0000 0x4000>,<0xf4000 0x4000>; interrupts = ; @@ -598,7 +598,7 @@ status = "disabled"; }; - usb3@f8000 { + usb3_1: usb3@f8000 { compatible = "marvell,armada-380-xhci"; reg = <0xf8000 0x4000>,<0xfc000 0x4000>; interrupts = ; -- 2.10.2 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ralph Sennhauser Subject: [PATCH] ARM: dts: armada-38x: label USB and SATA nodes Date: Fri, 31 Mar 2017 09:41:15 +0200 Message-ID: <20170331074115.8111-1-ralph.sennhauser@gmail.com> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: Ralph Sennhauser , Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Mark Rutland , Russell King , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Recently most nodes got labels to make them referenceable. The USB 3.0 nodes as well as the nodes for the SATA controllers were left out, rectify the omission. Signed-off-by: Ralph Sennhauser --- Hi everybody In preparation to add support for the Linksys WRT3200ACM (Rango) some rework of the "dts-stack" is highly desirable. This patch is part of the preparatory work but independent. The label for the USB 2.0 port is "usb0:", so using "usb1:" and "usb2:" would be the logical continuation. Guess you realized the catch already, "usb2:" for an USB 3.0 controller might be very confusing. I'm sending this patch ahead of the rest so the labels can be discussed and finalized. Ralph --- arch/arm/boot/dts/armada-38x.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index ba27ec1..78c838a 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -530,7 +530,7 @@ interrupts = ; }; - sata@a8000 { + satac0: sata@a8000 { compatible = "marvell,armada-380-ahci"; reg = <0xa8000 0x2000>; interrupts = ; @@ -546,7 +546,7 @@ status = "disabled"; }; - sata@e0000 { + satac1: sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; interrupts = ; @@ -590,7 +590,7 @@ status = "disabled"; }; - usb3@f0000 { + usb3_0: usb3@f0000 { compatible = "marvell,armada-380-xhci"; reg = <0xf0000 0x4000>,<0xf4000 0x4000>; interrupts = ; @@ -598,7 +598,7 @@ status = "disabled"; }; - usb3@f8000 { + usb3_1: usb3@f8000 { compatible = "marvell,armada-380-xhci"; reg = <0xf8000 0x4000>,<0xfc000 0x4000>; interrupts = ; -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: ralph.sennhauser@gmail.com (Ralph Sennhauser) Date: Fri, 31 Mar 2017 09:41:15 +0200 Subject: [PATCH] ARM: dts: armada-38x: label USB and SATA nodes Message-ID: <20170331074115.8111-1-ralph.sennhauser@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Recently most nodes got labels to make them referenceable. The USB 3.0 nodes as well as the nodes for the SATA controllers were left out, rectify the omission. Signed-off-by: Ralph Sennhauser --- Hi everybody In preparation to add support for the Linksys WRT3200ACM (Rango) some rework of the "dts-stack" is highly desirable. This patch is part of the preparatory work but independent. The label for the USB 2.0 port is "usb0:", so using "usb1:" and "usb2:" would be the logical continuation. Guess you realized the catch already, "usb2:" for an USB 3.0 controller might be very confusing. I'm sending this patch ahead of the rest so the labels can be discussed and finalized. Ralph --- arch/arm/boot/dts/armada-38x.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index ba27ec1..78c838a 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -530,7 +530,7 @@ interrupts = ; }; - sata at a8000 { + satac0: sata at a8000 { compatible = "marvell,armada-380-ahci"; reg = <0xa8000 0x2000>; interrupts = ; @@ -546,7 +546,7 @@ status = "disabled"; }; - sata at e0000 { + satac1: sata at e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; interrupts = ; @@ -590,7 +590,7 @@ status = "disabled"; }; - usb3 at f0000 { + usb3_0: usb3 at f0000 { compatible = "marvell,armada-380-xhci"; reg = <0xf0000 0x4000>,<0xf4000 0x4000>; interrupts = ; @@ -598,7 +598,7 @@ status = "disabled"; }; - usb3 at f8000 { + usb3_1: usb3 at f8000 { compatible = "marvell,armada-380-xhci"; reg = <0xf8000 0x4000>,<0xfc000 0x4000>; interrupts = ; -- 2.10.2