[PATCH v4 05/27] ARM: GICv3 ITS: map ITS command buffer

[Andre Przywara <andre.przywara@arm.com>]

Instead of directly manipulating the tables in memory, an ITS driver
sends commands via a ring buffer in normal system memory to the ITS h/w
to create or alter the LPI mappings.
Allocate memory for that buffer and tell the ITS about it to be able
to send ITS commands.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 xen/arch/arm/gic-v3-its.c        | 53 ++++++++++++++++++++++++++++++++++++++++
 xen/include/asm-arm/gic_v3_its.h |  6 +++++
 2 files changed, 59 insertions(+)

diff --git a/xen/arch/arm/gic-v3-its.c b/xen/arch/arm/gic-v3-its.c
index 00a1f7b..51b1b60 100644
--- a/xen/arch/arm/gic-v3-its.c
+++ b/xen/arch/arm/gic-v3-its.c
@@ -20,10 +20,13 @@
 
 #include <xen/lib.h>
 #include <xen/mm.h>
+#include <xen/sizes.h>
 #include <asm/gic_v3_defs.h>
 #include <asm/gic_v3_its.h>
 #include <asm/io.h>
 
+#define ITS_CMD_QUEUE_SZ                SZ_1M
+
 /*
  * No lock here, as this list gets only populated upon boot while scanning
  * firmware tables for all host ITSes, and only gets iterated afterwards.
@@ -60,6 +63,51 @@ static uint64_t encode_baser_phys_addr(paddr_t addr, unsigned int page_bits)
     return ret | ((addr & GENMASK_ULL(51, 48)) >> (48 - 12));
 }
 
+static void *its_map_cbaser(struct host_its *its)
+{
+    void __iomem *cbasereg = its->its_base + GITS_CBASER;
+    uint64_t reg;
+    void *buffer;
+
+    reg  = GIC_BASER_InnerShareable << GITS_BASER_SHAREABILITY_SHIFT;
+    reg |= GIC_BASER_CACHE_SameAsInner << GITS_BASER_OUTER_CACHEABILITY_SHIFT;
+    reg |= GIC_BASER_CACHE_RaWaWb << GITS_BASER_INNER_CACHEABILITY_SHIFT;
+
+    buffer = _xzalloc(ITS_CMD_QUEUE_SZ, SZ_64K);
+    if ( !buffer )
+        return NULL;
+
+    if ( virt_to_maddr(buffer) & ~GENMASK_ULL(51, 12) )
+    {
+        xfree(buffer);
+        return NULL;
+    }
+
+    reg |= GITS_VALID_BIT | virt_to_maddr(buffer);
+    reg |= ((ITS_CMD_QUEUE_SZ / SZ_4K) - 1) & GITS_CBASER_SIZE_MASK;
+    writeq_relaxed(reg, cbasereg);
+    reg = readq_relaxed(cbasereg);
+
+    /* If the ITS dropped shareability, drop cacheability as well. */
+    if ( (reg & GITS_BASER_SHAREABILITY_MASK) == 0 )
+    {
+        reg &= ~GITS_BASER_INNER_CACHEABILITY_MASK;
+        writeq_relaxed(reg, cbasereg);
+    }
+
+    /*
+     * If the command queue memory is mapped as uncached, we need to flush
+     * it on every access.
+     */
+    if ( !(reg & GITS_BASER_INNER_CACHEABILITY_MASK) )
+    {
+        its->flags |= HOST_ITS_FLUSH_CMD_QUEUE;
+        printk(XENLOG_WARNING "using non-cacheable ITS command queue\n");
+    }
+
+    return buffer;
+}
+
 /* The ITS BASE registers work with page sizes of 4K, 16K or 64K. */
 #define BASER_PAGE_BITS(sz) ((sz) * 2 + 12)
 
@@ -185,6 +233,11 @@ static int gicv3_its_init_single_its(struct host_its *hw_its)
         }
     }
 
+    hw_its->cmd_buf = its_map_cbaser(hw_its);
+    if ( !hw_its->cmd_buf )
+        return -ENOMEM;
+    writeq_relaxed(0, hw_its->its_base + GITS_CWRITER);
+
     return 0;
 }
 
diff --git a/xen/include/asm-arm/gic_v3_its.h b/xen/include/asm-arm/gic_v3_its.h
index c7d8766..3500b042 100644
--- a/xen/include/asm-arm/gic_v3_its.h
+++ b/xen/include/asm-arm/gic_v3_its.h
@@ -84,8 +84,12 @@
 #define GITS_BASER_OUTER_CACHEABILITY_MASK   (0x7ULL << GITS_BASER_OUTER_CACHEABILITY_SHIFT)
 #define GITS_BASER_INNER_CACHEABILITY_MASK   (0x7ULL << GITS_BASER_INNER_CACHEABILITY_SHIFT)
 
+#define GITS_CBASER_SIZE_MASK           0xff
+
 #include <xen/device_tree.h>
 
+#define HOST_ITS_FLUSH_CMD_QUEUE        (1U << 0)
+
 /* data structure for each hardware ITS */
 struct host_its {
     struct list_head entry;
@@ -96,6 +100,8 @@ struct host_its {
     unsigned int devid_bits;
     unsigned int evid_bits;
     unsigned int itte_size;
+    void *cmd_buf;
+    unsigned int flags;
 };
 
 
-- 
2.9.0


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel