All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi
@ 2017-04-05 22:23 Simon Glass
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 01/18] net: smsc95xx: Correct free_pkt() implementation Simon Glass
                   ` (17 more replies)
  0 siblings, 18 replies; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Raspberry Pi uses a DWC2 USB controller and a SMSC USB Ethernet adaptor.
Driver model support for these is available.

This series does the following:
- Enable CONFIG_DM_ETH and CONFIG_DM_USB on Raspberry Pi
- Convert the MMC driver to driver model
- Convert the video driver to driver model
- Fixes a driver model video bug which accessed beyond the frame buffer
- Fixes start-up of MMC with driver model (e.g. at present it does not
    support env_fat)
- Clean up a few loose ends

With Ethernet active the device list looks something like this:

U-Boot> dm tree
 Class       Probed   Name
----------------------------------------
 root        [ + ]    root_driver
 simple_bus  [ + ]    |-- soc
 gpio        [ + ]    |   |-- gpio at 7e200000
 serial      [ + ]    |   |-- serial at 7e215040
 mmc         [ + ]    |   |-- sdhci at 7e300000
 blk         [ + ]    |   |   `-- sdhci at 7e300000.blk
 video       [ + ]    |   |-- hdmi at 7e902000
 vidconsole0 [ + ]    |   |   `-- hdmi at 7e902000.vidconsole0
 usb         [ + ]    |   `-- usb at 7e980000
 usb_hub     [ + ]    |       `-- usb_hub
 usb_hub     [ + ]    |           `-- usb_hub
 eth         [ + ]    |               `-- smsc95xx_eth
 simple_bus  [   ]    `-- clocks

With version 4 a problem was discovered where tftpboot does not correctly
read a file on rpi_2 and rpi_3. The cause is unknown but for now this
series includes a work-around in the dwc2 driver. See here for details:

https://lists.denx.de/pipermail/u-boot/2017-April/285451.html

Changes in v6:
- Drop changes to dwc2.c now we have http://patchwork.ozlabs.org/patch/746917/
- Rebase to master

Changes in v5:
- Add new patch for smsc95xx to correct free_pkt() implementation
- Rebase to master

Changes in v4:
- Add patches to convert video and MMC to driver model also
- Rebase to master

Changes in v3:
- Drop applied patches from series
- Drop patch to introduce usbethaddr for driver model

Simon Glass (18):
  net: smsc95xx: Correct free_pkt() implementation
  dm: mmc: Set up the MMC device when controller is probed
  dm: video: Correct line clearing code
  string: Use memcpy() within memmove() when we can
  arm: rpi: Drop the GPIO device addresses
  arm: rpi: Drop CONFIG_CONS_INDEX
  dm: arm: rpi: Move to driver model for USB
  dm: arm: rpi: Use driver model for Ethernet
  arm: rpi: Add a file to handle messages
  arm: rpi: Add a function to obtain the MMC clock
  dm: mmc: rpi: Convert Raspberry Pi to driver model for MMC
  dm: arm: rpi: Drop CONFIG_OF_EMBED
  video: arm: rpi: Move the video query out of the driver
  video: arm: rpi: Move the video settings out of the driver
  dm: video: Refactor lcd_simplefb to prepare for driver model
  dm: video: Add driver-model support to lcd_simplefb
  dm: video: arm: rpi: Convert to use driver model for video
  arm: rpi: Add a TODO to move all messages into the msg handler

 arch/arm/mach-bcm283x/Makefile            |   2 +-
 arch/arm/mach-bcm283x/include/mach/gpio.h |   5 -
 arch/arm/mach-bcm283x/include/mach/msg.h  |  51 ++++++++++
 arch/arm/mach-bcm283x/msg.c               | 154 ++++++++++++++++++++++++++++++
 board/raspberrypi/rpi/rpi.c               |  56 +----------
 common/lcd_simplefb.c                     |  47 +++++++--
 configs/rpi_2_defconfig                   |   6 +-
 configs/rpi_3_32b_defconfig               |   6 +-
 configs/rpi_3_defconfig                   |   6 +-
 configs/rpi_defconfig                     |   6 +-
 drivers/mmc/bcm2835_sdhci.c               |  81 ++++++++++++----
 drivers/mmc/mmc-uclass.c                  |  12 +++
 drivers/usb/eth/smsc95xx.c                |   4 +-
 drivers/video/bcm2835.c                   | 140 +++++++--------------------
 drivers/video/console_normal.c            |   3 +-
 include/configs/rpi.h                     |  17 +---
 lib/string.c                              |  11 +--
 17 files changed, 384 insertions(+), 223 deletions(-)
 create mode 100644 arch/arm/mach-bcm283x/include/mach/msg.h
 create mode 100644 arch/arm/mach-bcm283x/msg.c

-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 01/18] net: smsc95xx: Correct free_pkt() implementation
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 02/18] dm: mmc: Set up the MMC device when controller is probed Simon Glass
                   ` (16 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

On further review this returns the wrong packet length from the driver.
It may not be noticed since protocols will take care of it. Fix it by
subtracting the header length from the packet length returned.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v6: None
Changes in v5:
- Add new patch for smsc95xx to correct free_pkt() implementation

Changes in v4: None
Changes in v3: None

 drivers/usb/eth/smsc95xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
index d4c8ea4a98..26000a5a45 100644
--- a/drivers/usb/eth/smsc95xx.c
+++ b/drivers/usb/eth/smsc95xx.c
@@ -998,7 +998,7 @@ int smsc95xx_eth_recv(struct udevice *dev, int flags, uchar **packetp)
 	}
 
 	*packetp = ptr + sizeof(packet_len);
-	return packet_len;
+	return packet_len - 4;
 
 err:
 	usb_ether_advance_rxbuf(ueth, -1);
@@ -1009,7 +1009,7 @@ static int smsc95xx_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
 {
 	struct smsc95xx_private *priv = dev_get_priv(dev);
 
-	packet_len = ALIGN(packet_len, 4);
+	packet_len = ALIGN(packet_len + sizeof(u32), 4);
 	usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len);
 
 	return 0;
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 02/18] dm: mmc: Set up the MMC device when controller is probed
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 01/18] net: smsc95xx: Correct free_pkt() implementation Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-04-24  2:11   ` Simon Glass
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 03/18] dm: video: Correct line clearing code Simon Glass
                   ` (15 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

When an MMC controller is set up we should probe the device to find out
what it is. This includes finding its capacity and reading its partition
table.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 drivers/mmc/mmc-uclass.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
index 9c07871d3a..009cdd1d6d 100644
--- a/drivers/mmc/mmc-uclass.c
+++ b/drivers/mmc/mmc-uclass.c
@@ -239,6 +239,15 @@ int mmc_unbind(struct udevice *dev)
 	return 0;
 }
 
+#ifdef CONFIG_BLK
+static int mmc_post_probe(struct udevice *dev)
+{
+	struct mmc *mmc = mmc_get_mmc_dev(dev);
+
+	return mmc_init(mmc);
+}
+#endif
+
 static int mmc_select_hwpart(struct udevice *bdev, int hwpart)
 {
 	struct udevice *mmc_dev = dev_get_parent(bdev);
@@ -292,4 +301,7 @@ UCLASS_DRIVER(mmc) = {
 	.name		= "mmc",
 	.flags		= DM_UC_FLAG_SEQ_ALIAS,
 	.per_device_auto_alloc_size = sizeof(struct mmc_uclass_priv),
+#ifdef CONFIG_BLK
+	.post_probe	= mmc_post_probe,
+#endif
 };
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 03/18] dm: video: Correct line clearing code
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 01/18] net: smsc95xx: Correct free_pkt() implementation Simon Glass
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 02/18] dm: mmc: Set up the MMC device when controller is probed Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 04/18] string: Use memcpy() within memmove() when we can Simon Glass
                   ` (14 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

At present we clear many more bytes than we should on 16bpp and 32bpp
displays. The number of pixels to clear is currently calculated as the
line length (in bytes) multiplied by the number of lines to clear. This
is only correct for 8bpp displays.

Correct the calculation to use the number of text columns multiplied by
the width of each character multiplied by the number of lines to clear.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 drivers/video/console_normal.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/video/console_normal.c b/drivers/video/console_normal.c
index 89a55dd11d..744345d58e 100644
--- a/drivers/video/console_normal.c
+++ b/drivers/video/console_normal.c
@@ -16,9 +16,10 @@
 
 static int console_normal_set_row(struct udevice *dev, uint row, int clr)
 {
+	struct vidconsole_priv *vc_priv = dev_get_uclass_priv(dev);
 	struct video_priv *vid_priv = dev_get_uclass_priv(dev->parent);
 	void *line;
-	int pixels = VIDEO_FONT_HEIGHT * vid_priv->line_length;
+	int pixels = VIDEO_FONT_HEIGHT * vc_priv->cols * VIDEO_FONT_WIDTH;
 	int i;
 
 	line = vid_priv->fb + row * VIDEO_FONT_HEIGHT * vid_priv->line_length;
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 04/18] string: Use memcpy() within memmove() when we can
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (2 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 03/18] dm: video: Correct line clearing code Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 05/18] arm: rpi: Drop the GPIO device addresses Simon Glass
                   ` (13 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

A common use of memmove() can be handled by memcpy(). Also memcpy()
includes an optimisation for large sizes: it copies a word at a time. So
we can get a speed-up by calling memcpy() to handle our move in this case.

Update memmove() to call memcpy() if the destination is before the source.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 lib/string.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/lib/string.c b/lib/string.c
index c1a28c14ce..e94021c468 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -511,16 +511,9 @@ void * memmove(void * dest,const void *src,size_t count)
 {
 	char *tmp, *s;
 
-	if (src == dest)
-		return dest;
-
 	if (dest <= src) {
-		tmp = (char *) dest;
-		s = (char *) src;
-		while (count--)
-			*tmp++ = *s++;
-		}
-	else {
+		memcpy(dest, src, count);
+	} else {
 		tmp = (char *) dest + count;
 		s = (char *) src + count;
 		while (count--)
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 05/18] arm: rpi: Drop the GPIO device addresses
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (3 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 04/18] string: Use memcpy() within memmove() when we can Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 06/18] arm: rpi: Drop CONFIG_CONS_INDEX Simon Glass
                   ` (12 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

We can rely on the device tree to provide this information.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 arch/arm/mach-bcm283x/include/mach/gpio.h | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/mach-bcm283x/include/mach/gpio.h b/arch/arm/mach-bcm283x/include/mach/gpio.h
index b2df75ad3f..daaee52f81 100644
--- a/arch/arm/mach-bcm283x/include/mach/gpio.h
+++ b/arch/arm/mach-bcm283x/include/mach/gpio.h
@@ -9,11 +9,6 @@
 #ifndef _BCM2835_GPIO_H_
 #define _BCM2835_GPIO_H_
 
-#ifndef CONFIG_BCM2835
-#define BCM2835_GPIO_BASE		0x3f200000
-#else
-#define BCM2835_GPIO_BASE		0x20200000
-#endif
 #define BCM2835_GPIO_COUNT		54
 
 #define BCM2835_GPIO_FSEL_MASK		0x7
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 06/18] arm: rpi: Drop CONFIG_CONS_INDEX
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (4 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 05/18] arm: rpi: Drop the GPIO device addresses Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:51   ` [U-Boot] [U-Boot,v6,06/18] " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 07/18] dm: arm: rpi: Move to driver model for USB Simon Glass
                   ` (11 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

This is not needed now that serial uses driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 include/configs/rpi.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 92eb792989..8d9a44c51d 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -98,7 +98,6 @@
 #else
 #define CONFIG_PL01X_SERIAL
 #endif
-#define CONFIG_CONS_INDEX		0
 
 /* Console configuration */
 #define CONFIG_SYS_CBSIZE		1024
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 07/18] dm: arm: rpi: Move to driver model for USB
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (5 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 06/18] arm: rpi: Drop CONFIG_CONS_INDEX Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 08/18] dm: arm: rpi: Use driver model for Ethernet Simon Glass
                   ` (10 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Start using driver model for USB on the Raspberry Pi. The dwc2 supports
this now so this is just a config change.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 configs/rpi_2_defconfig     | 1 +
 configs/rpi_3_32b_defconfig | 1 +
 configs/rpi_3_defconfig     | 1 +
 configs/rpi_defconfig       | 1 +
 include/configs/rpi.h       | 5 -----
 5 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
index 9d669c92e4..4de1d206bc 100644
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -17,6 +17,7 @@ CONFIG_OF_EMBED=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_CONSOLE_SCROLL_LINES=10
diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
index d0f7beaa0b..746a6e2816 100644
--- a/configs/rpi_3_32b_defconfig
+++ b/configs/rpi_3_32b_defconfig
@@ -19,6 +19,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_CONSOLE_SCROLL_LINES=10
diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
index ce28c31283..b916ced65a 100644
--- a/configs/rpi_3_defconfig
+++ b/configs/rpi_3_defconfig
@@ -19,6 +19,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_CONSOLE_SCROLL_LINES=10
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 4a90ca8348..514b29b5cd 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -17,6 +17,7 @@ CONFIG_OF_EMBED=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_CONSOLE_SCROLL_LINES=10
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 8d9a44c51d..f96ee46794 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -80,11 +80,6 @@
 
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_DWC2
-#ifndef CONFIG_BCM2835
-#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000
-#else
-#define CONFIG_USB_DWC2_REG_ADDR 0x20980000
-#endif
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_TFTP_TSIZE
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 08/18] dm: arm: rpi: Use driver model for Ethernet
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (6 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 07/18] dm: arm: rpi: Move to driver model for USB Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 09/18] arm: rpi: Add a file to handle messages Simon Glass
                   ` (9 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Enable CONFIG_DM_ETH so that driver model is used for the USB Ethernet
device.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 configs/rpi_2_defconfig     | 1 +
 configs/rpi_3_32b_defconfig | 1 +
 configs/rpi_3_defconfig     | 1 +
 configs/rpi_defconfig       | 1 +
 4 files changed, 4 insertions(+)

diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
index 4de1d206bc..090a0b0714 100644
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -16,6 +16,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_OF_EMBED=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_DM_ETH=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
index 746a6e2816..785bf21e9a 100644
--- a/configs/rpi_3_32b_defconfig
+++ b/configs/rpi_3_32b_defconfig
@@ -17,6 +17,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_OF_EMBED=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_DM_ETH=y
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
index b916ced65a..5ff8ed1cf2 100644
--- a/configs/rpi_3_defconfig
+++ b/configs/rpi_3_defconfig
@@ -17,6 +17,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_OF_EMBED=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_DM_ETH=y
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 514b29b5cd..5d44f29726 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -16,6 +16,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_OF_EMBED=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_DM_ETH=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 09/18] arm: rpi: Add a file to handle messages
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (7 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 08/18] dm: arm: rpi: Use driver model for Ethernet Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 10/18] arm: rpi: Add a function to obtain the MMC clock Simon Glass
                   ` (8 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

The bcm283x chips provide a way for the ARM core to communicate with the
graphics processor, which is in charge of many things. This is handled by
way of a message prototcol.

At present the code for sending message (and receiving a reply) is spread
around U-Boot, primarily in the board file. This means that sending a
message from a driver requires duplicating the code.

Create a new message implementation with a function to support powering on
a subsystem as a starting point.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 arch/arm/mach-bcm283x/Makefile           |  2 +-
 arch/arm/mach-bcm283x/include/mach/msg.h | 18 +++++++++++++++
 arch/arm/mach-bcm283x/msg.c              | 39 ++++++++++++++++++++++++++++++++
 board/raspberrypi/rpi/rpi.c              | 35 +++-------------------------
 4 files changed, 61 insertions(+), 33 deletions(-)
 create mode 100644 arch/arm/mach-bcm283x/include/mach/msg.h
 create mode 100644 arch/arm/mach-bcm283x/msg.c

diff --git a/arch/arm/mach-bcm283x/Makefile b/arch/arm/mach-bcm283x/Makefile
index 5cb1b2fe94..b5f606ef0b 100644
--- a/arch/arm/mach-bcm283x/Makefile
+++ b/arch/arm/mach-bcm283x/Makefile
@@ -5,4 +5,4 @@
 #
 
 obj-$(CONFIG_BCM2835) += lowlevel_init.o
-obj-y	+= init.o reset.o mbox.o phys2bus.o
+obj-y	+= init.o reset.o mbox.o msg.o phys2bus.o
diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h
new file mode 100644
index 0000000000..3bcb5db3e6
--- /dev/null
+++ b/arch/arm/mach-bcm283x/include/mach/msg.h
@@ -0,0 +1,18 @@
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _BCM2835_MSG_H
+#define _BCM2835_MSG_H
+
+/**
+ * bcm2835_power_on_module() - power on an SoC module
+ *
+ * @module: ID of module to power on (BCM2835_MBOX_POWER_DEVID_...)
+ * @return 0 if OK, -EIO on error
+ */
+int bcm2835_power_on_module(u32 module);
+
+#endif
diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c
new file mode 100644
index 0000000000..08b1beaa53
--- /dev/null
+++ b/arch/arm/mach-bcm283x/msg.c
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <memalign.h>
+#include <asm/arch/mbox.h>
+
+struct msg_set_power_state {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_set_power_state set_power_state;
+	u32 end_tag;
+};
+
+int bcm2835_power_on_module(u32 module)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_pwr);
+	BCM2835_MBOX_INIT_TAG(&msg_pwr->set_power_state,
+			      SET_POWER_STATE);
+	msg_pwr->set_power_state.body.req.device_id = module;
+	msg_pwr->set_power_state.body.req.state =
+		BCM2835_MBOX_SET_POWER_STATE_REQ_ON |
+		BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT;
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN,
+				     &msg_pwr->hdr);
+	if (ret) {
+		printf("bcm2835: Could not set module %u power state\n",
+		       module);
+		return -EIO;
+	}
+
+	return 0;
+}
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 2146534b36..d0d9a9739d 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -16,6 +16,7 @@
 #include <mmc.h>
 #include <asm/gpio.h>
 #include <asm/arch/mbox.h>
+#include <asm/arch/msg.h>
 #include <asm/arch/sdhci.h>
 #include <asm/global_data.h>
 #include <dm/platform_data/serial_bcm283x_mu.h>
@@ -53,12 +54,6 @@ struct msg_get_mac_address {
 	u32 end_tag;
 };
 
-struct msg_set_power_state {
-	struct bcm2835_mbox_hdr hdr;
-	struct bcm2835_mbox_tag_set_power_state set_power_state;
-	u32 end_tag;
-};
-
 struct msg_get_clock_rate {
 	struct bcm2835_mbox_hdr hdr;
 	struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
@@ -365,30 +360,6 @@ int misc_init_r(void)
 	return 0;
 }
 
-static int power_on_module(u32 module)
-{
-	ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1);
-	int ret;
-
-	BCM2835_MBOX_INIT_HDR(msg_pwr);
-	BCM2835_MBOX_INIT_TAG(&msg_pwr->set_power_state,
-			      SET_POWER_STATE);
-	msg_pwr->set_power_state.body.req.device_id = module;
-	msg_pwr->set_power_state.body.req.state =
-		BCM2835_MBOX_SET_POWER_STATE_REQ_ON |
-		BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT;
-
-	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN,
-				     &msg_pwr->hdr);
-	if (ret) {
-		printf("bcm2835: Could not set module %u power state\n",
-		       module);
-		return -1;
-	}
-
-	return 0;
-}
-
 static void get_board_rev(void)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_board_rev, msg, 1);
@@ -492,7 +463,7 @@ int board_init(void)
 
 	gd->bd->bi_boot_params = 0x100;
 
-	return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
+	return bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
 }
 
 int board_mmc_init(bd_t *bis)
@@ -500,7 +471,7 @@ int board_mmc_init(bd_t *bis)
 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1);
 	int ret;
 
-	power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
+	bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
 
 	BCM2835_MBOX_INIT_HDR(msg_clk);
 	BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE);
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 10/18] arm: rpi: Add a function to obtain the MMC clock
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (8 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 09/18] arm: rpi: Add a file to handle messages Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 11/18] dm: mmc: rpi: Convert Raspberry Pi to driver model for MMC Simon Glass
                   ` (7 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Move this code into the new message handler file.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 arch/arm/mach-bcm283x/include/mach/msg.h |  7 +++++++
 arch/arm/mach-bcm283x/msg.c              | 28 ++++++++++++++++++++++++++++
 board/raspberrypi/rpi/rpi.c              | 16 ++++------------
 3 files changed, 39 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h
index 3bcb5db3e6..8fd4ace124 100644
--- a/arch/arm/mach-bcm283x/include/mach/msg.h
+++ b/arch/arm/mach-bcm283x/include/mach/msg.h
@@ -15,4 +15,11 @@
  */
 int bcm2835_power_on_module(u32 module);
 
+/**
+ * bcm2835_get_mmc_clock() - get the frequency of the MMC clock
+ *
+ * @return clock frequency, or -ve on error
+ */
+int bcm2835_get_mmc_clock(void);
+
 #endif
diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c
index 08b1beaa53..facb916711 100644
--- a/arch/arm/mach-bcm283x/msg.c
+++ b/arch/arm/mach-bcm283x/msg.c
@@ -14,6 +14,12 @@ struct msg_set_power_state {
 	u32 end_tag;
 };
 
+struct msg_get_clock_rate {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
+	u32 end_tag;
+};
+
 int bcm2835_power_on_module(u32 module)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1);
@@ -37,3 +43,25 @@ int bcm2835_power_on_module(u32 module)
 
 	return 0;
 }
+
+int bcm2835_get_mmc_clock(void)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1);
+	int ret;
+
+	ret = bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
+	if (ret)
+		return ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_clk);
+	BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE);
+	msg_clk->get_clock_rate.body.req.clock_id = BCM2835_MBOX_CLOCK_ID_EMMC;
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr);
+	if (ret) {
+		printf("bcm2835: Could not query eMMC clock rate\n");
+		return -EIO;
+	}
+
+	return msg_clk->get_clock_rate.body.resp.rate_hz;
+}
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index d0d9a9739d..2893f09bc5 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -468,23 +468,15 @@ int board_init(void)
 
 int board_mmc_init(bd_t *bis)
 {
-	ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1);
 	int ret;
 
 	bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
 
-	BCM2835_MBOX_INIT_HDR(msg_clk);
-	BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE);
-	msg_clk->get_clock_rate.body.req.clock_id = BCM2835_MBOX_CLOCK_ID_EMMC;
+	ret = bcm2835_get_mmc_clock();
+	if (ret)
+		return ret;
 
-	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr);
-	if (ret) {
-		printf("bcm2835: Could not query eMMC clock rate\n");
-		return -1;
-	}
-
-	return bcm2835_sdhci_init(BCM2835_SDHCI_BASE,
-				  msg_clk->get_clock_rate.body.resp.rate_hz);
+	return bcm2835_sdhci_init(BCM2835_SDHCI_BASE, ret);
 }
 
 int ft_board_setup(void *blob, bd_t *bd)
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 11/18] dm: mmc: rpi: Convert Raspberry Pi to driver model for MMC
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (9 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 10/18] arm: rpi: Add a function to obtain the MMC clock Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 12/18] dm: arm: rpi: Drop CONFIG_OF_EMBED Simon Glass
                   ` (6 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Convert the bcm2835 SDHCI driver over to support CONFIG_DM_MMC and move
all boards over. There is no need to keep the old code since there are no
other users.

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 board/raspberrypi/rpi/rpi.c | 13 --------
 configs/rpi_2_defconfig     |  1 +
 configs/rpi_3_32b_defconfig |  1 +
 configs/rpi_3_defconfig     |  1 +
 configs/rpi_defconfig       |  1 +
 drivers/mmc/bcm2835_sdhci.c | 81 ++++++++++++++++++++++++++++++++++++---------
 6 files changed, 69 insertions(+), 29 deletions(-)

diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 2893f09bc5..1fb7ba05ff 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -466,19 +466,6 @@ int board_init(void)
 	return bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
 }
 
-int board_mmc_init(bd_t *bis)
-{
-	int ret;
-
-	bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI);
-
-	ret = bcm2835_get_mmc_clock();
-	if (ret)
-		return ret;
-
-	return bcm2835_sdhci_init(BCM2835_SDHCI_BASE, ret);
-}
-
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	/*
diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
index 090a0b0714..3d6f2a3337 100644
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -14,6 +14,7 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_OF_EMBED=y
+CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_DM_ETH=y
diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
index 785bf21e9a..ca0ef7afe7 100644
--- a/configs/rpi_3_32b_defconfig
+++ b/configs/rpi_3_32b_defconfig
@@ -15,6 +15,7 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_OF_EMBED=y
+CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_DM_ETH=y
diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
index 5ff8ed1cf2..185a56c280 100644
--- a/configs/rpi_3_defconfig
+++ b/configs/rpi_3_defconfig
@@ -15,6 +15,7 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_OF_EMBED=y
+CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_DM_ETH=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 5d44f29726..89ecef8994 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -14,6 +14,7 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_OF_EMBED=y
+CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_DM_ETH=y
diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c
index 29c2a85812..74ce573096 100644
--- a/drivers/mmc/bcm2835_sdhci.c
+++ b/drivers/mmc/bcm2835_sdhci.c
@@ -37,14 +37,23 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <malloc.h>
+#include <memalign.h>
 #include <sdhci.h>
-#include <mach/timer.h>
+#include <asm/arch/msg.h>
+#include <asm/arch/mbox.h>
 #include <mach/sdhci.h>
+#include <mach/timer.h>
 
 /* 400KHz is max freq for card ID etc. Use that as min */
 #define MIN_FREQ 400000
 
+struct bcm2835_sdhci_plat {
+	struct mmc_config cfg;
+	struct mmc mmc;
+};
+
 struct bcm2835_sdhci_host {
 	struct sdhci_host host;
 	uint twoticks_delay;
@@ -57,7 +66,7 @@ static inline struct bcm2835_sdhci_host *to_bcm(struct sdhci_host *host)
 }
 
 static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val,
-						int reg)
+					    int reg)
 {
 	struct bcm2835_sdhci_host *bcm_host = to_bcm(host);
 
@@ -149,16 +158,33 @@ static const struct sdhci_ops bcm2835_ops = {
 	.read_b = bcm2835_sdhci_readb,
 };
 
-int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq)
+static int bcm2835_sdhci_bind(struct udevice *dev)
 {
-	struct bcm2835_sdhci_host *bcm_host;
-	struct sdhci_host *host;
+	struct bcm2835_sdhci_plat *plat = dev_get_platdata(dev);
 
-	bcm_host = calloc(1, sizeof(*bcm_host));
-	if (!bcm_host) {
-		printf("sdhci_host calloc fail!\n");
-		return -ENOMEM;
+	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static int bcm2835_sdhci_probe(struct udevice *dev)
+{
+	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	struct bcm2835_sdhci_plat *plat = dev_get_platdata(dev);
+	struct bcm2835_sdhci_host *priv = dev_get_priv(dev);
+	struct sdhci_host *host = &priv->host;
+	fdt_addr_t base;
+	int emmc_freq;
+	int ret;
+
+	base = dev_get_addr(dev);
+	if (base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	ret = bcm2835_get_mmc_clock();
+	if (ret < 0) {
+		debug("%s: Failed to set MMC clock (err=%d)\n", __func__, ret);
+		return ret;
 	}
+	emmc_freq = ret;
 
 	/*
 	 * See the comments in bcm2835_sdhci_raw_writel().
@@ -173,19 +199,42 @@ int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq)
 	 * Multiply by 1000000 to get uS per two ticks.
 	 * +1 for hack rounding.
 	 */
-	bcm_host->twoticks_delay = ((2 * 1000000) / MIN_FREQ) + 1;
-	bcm_host->last_write = 0;
+	priv->twoticks_delay = ((2 * 1000000) / MIN_FREQ) + 1;
+	priv->last_write = 0;
 
-	host = &bcm_host->host;
-	host->name = "bcm2835_sdhci";
-	host->ioaddr = (void *)(unsigned long)regbase;
+	host->name = dev->name;
+	host->ioaddr = (void *)base;
 	host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B |
 		SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_NO_HISPD_BIT;
 	host->max_clk = emmc_freq;
 	host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
 	host->ops = &bcm2835_ops;
 
-	add_sdhci(host, 0, MIN_FREQ);
+	ret = sdhci_setup_cfg(&plat->cfg, host, emmc_freq, MIN_FREQ);
+	if (ret) {
+		debug("%s: Failed to setup SDHCI (err=%d)\n", __func__, ret);
+		return ret;
+	}
+
+	upriv->mmc = &plat->mmc;
+	host->mmc = &plat->mmc;
+	host->mmc->priv = host;
 
-	return 0;
+	return sdhci_probe(dev);
 }
+
+static const struct udevice_id bcm2835_sdhci_match[] = {
+	{ .compatible = "brcm,bcm2835-sdhci" },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(sdhci_cdns) = {
+	.name = "sdhci-bcm2835",
+	.id = UCLASS_MMC,
+	.of_match = bcm2835_sdhci_match,
+	.bind = bcm2835_sdhci_bind,
+	.probe = bcm2835_sdhci_probe,
+	.priv_auto_alloc_size = sizeof(struct bcm2835_sdhci_host),
+	.platdata_auto_alloc_size = sizeof(struct bcm2835_sdhci_plat),
+	.ops = &sdhci_ops,
+};
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 12/18] dm: arm: rpi: Drop CONFIG_OF_EMBED
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (10 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 11/18] dm: mmc: rpi: Convert Raspberry Pi to driver model for MMC Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot,v6,12/18] " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 13/18] video: arm: rpi: Move the video query out of the driver Simon Glass
                   ` (5 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

We should not use an embedded device tree on a production board. There
does not seem to be any reason for it in commit 7670909. So drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 configs/rpi_2_defconfig     | 1 -
 configs/rpi_3_32b_defconfig | 1 -
 configs/rpi_3_defconfig     | 1 -
 configs/rpi_defconfig       | 1 -
 4 files changed, 4 deletions(-)

diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
index 3d6f2a3337..f8f123c4a6 100644
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -13,7 +13,6 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
-CONFIG_OF_EMBED=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
index ca0ef7afe7..3ff932c361 100644
--- a/configs/rpi_3_32b_defconfig
+++ b/configs/rpi_3_32b_defconfig
@@ -14,7 +14,6 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
-CONFIG_OF_EMBED=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
index 185a56c280..98d7bd2c50 100644
--- a/configs/rpi_3_defconfig
+++ b/configs/rpi_3_defconfig
@@ -14,7 +14,6 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
-CONFIG_OF_EMBED=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 89ecef8994..23d540d129 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -13,7 +13,6 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
-CONFIG_OF_EMBED=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_BCM2835=y
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 13/18] video: arm: rpi: Move the video query out of the driver
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (11 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 12/18] dm: arm: rpi: Drop CONFIG_OF_EMBED Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 14/18] video: arm: rpi: Move the video settings " Simon Glass
                   ` (4 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Add a function to get the video size to the msg handler and remove it from
the video driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 arch/arm/mach-bcm283x/include/mach/msg.h |  9 +++++++++
 arch/arm/mach-bcm283x/msg.c              | 26 ++++++++++++++++++++++++++
 drivers/video/bcm2835.c                  | 20 +++-----------------
 3 files changed, 38 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h
index 8fd4ace124..c785c43a67 100644
--- a/arch/arm/mach-bcm283x/include/mach/msg.h
+++ b/arch/arm/mach-bcm283x/include/mach/msg.h
@@ -22,4 +22,13 @@ int bcm2835_power_on_module(u32 module);
  */
 int bcm2835_get_mmc_clock(void);
 
+/**
+ * bcm2835_get_video_size() - get the current display size
+ *
+ * @widthp: Returns the width in pixels
+ * @heightp: Returns the height in pixels
+ * @return 0 if OK, -ve on error
+ */
+int bcm2835_get_video_size(int *widthp, int *heightp);
+
 #endif
diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c
index facb916711..17266c01a6 100644
--- a/arch/arm/mach-bcm283x/msg.c
+++ b/arch/arm/mach-bcm283x/msg.c
@@ -6,6 +6,7 @@
 
 #include <common.h>
 #include <memalign.h>
+#include <phys2bus.h>
 #include <asm/arch/mbox.h>
 
 struct msg_set_power_state {
@@ -20,6 +21,12 @@ struct msg_get_clock_rate {
 	u32 end_tag;
 };
 
+struct msg_query {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
+	u32 end_tag;
+};
+
 int bcm2835_power_on_module(u32 module)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1);
@@ -65,3 +72,22 @@ int bcm2835_get_mmc_clock(void)
 
 	return msg_clk->get_clock_rate.body.resp.rate_hz;
 }
+
+int bcm2835_get_video_size(int *widthp, int *heightp)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_query, msg_query, 1);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_query);
+	BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_query->physical_w_h,
+				     GET_PHYSICAL_W_H);
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_query->hdr);
+	if (ret) {
+		printf("bcm2835: Could not query display resolution\n");
+		return ret;
+	}
+	*widthp = msg_query->physical_w_h.body.resp.width;
+	*heightp = msg_query->physical_w_h.body.resp.height;
+
+	return 0;
+}
diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c
index cc6454f10d..eb137be11c 100644
--- a/drivers/video/bcm2835.c
+++ b/drivers/video/bcm2835.c
@@ -9,6 +9,7 @@
 #include <memalign.h>
 #include <phys2bus.h>
 #include <asm/arch/mbox.h>
+#include <asm/arch/msg.h>
 #include <asm/global_data.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -18,12 +19,6 @@ vidinfo_t panel_info;
 
 static u32 bcm2835_pitch;
 
-struct msg_query {
-	struct bcm2835_mbox_hdr hdr;
-	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
-	u32 end_tag;
-};
-
 struct msg_setup {
 	struct bcm2835_mbox_hdr hdr;
 	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
@@ -40,27 +35,18 @@ struct msg_setup {
 
 void lcd_ctrl_init(void *lcdbase)
 {
-	ALLOC_CACHE_ALIGN_BUFFER(struct msg_query, msg_query, 1);
 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_setup, msg_setup, 1);
 	int ret;
-	u32 w, h;
+	int w, h;
 	u32 fb_start, fb_end;
 
 	debug("bcm2835: Query resolution...\n");
-
-	BCM2835_MBOX_INIT_HDR(msg_query);
-	BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_query->physical_w_h,
-					GET_PHYSICAL_W_H);
-	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_query->hdr);
+	ret = bcm2835_get_video_size(&w, &h);
 	if (ret) {
-		printf("bcm2835: Could not query display resolution\n");
 		/* FIXME: How to disable the LCD to prevent errors? hang()? */
 		return;
 	}
 
-	w = msg_query->physical_w_h.body.resp.width;
-	h = msg_query->physical_w_h.body.resp.height;
-
 	debug("bcm2835: Setting up display for %d x %d\n", w, h);
 
 	BCM2835_MBOX_INIT_HDR(msg_setup);
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 14/18] video: arm: rpi: Move the video settings out of the driver
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (12 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 13/18] video: arm: rpi: Move the video query out of the driver Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 15/18] dm: video: Refactor lcd_simplefb to prepare for driver model Simon Glass
                   ` (3 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Add a function to set the video parameters to the msg handler and remove
it from the video driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 arch/arm/mach-bcm283x/include/mach/msg.h | 17 ++++++++
 arch/arm/mach-bcm283x/msg.c              | 61 ++++++++++++++++++++++++++++
 drivers/video/bcm2835.c                  | 68 +++++---------------------------
 3 files changed, 88 insertions(+), 58 deletions(-)

diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h
index c785c43a67..478b1f1c50 100644
--- a/arch/arm/mach-bcm283x/include/mach/msg.h
+++ b/arch/arm/mach-bcm283x/include/mach/msg.h
@@ -31,4 +31,21 @@ int bcm2835_get_mmc_clock(void);
  */
 int bcm2835_get_video_size(int *widthp, int *heightp);
 
+/**
+ * bcm2835_set_video_params() - set the video parameters
+ *
+ * @widthp: Video width to request (returns the actual width selected)
+ * @heightp: Video height to request (returns the actual height selected)
+ * @depth_bpp: Requested bit depth
+ * @pixel_order: Pixel order to use (BCM2835_MBOX_PIXEL_ORDER_...)
+ * @alpha_mode: Alpha transparency mode to use (BCM2835_MBOX_ALPHA_MODE_...)
+ * @fb_basep: Returns base address of frame buffer
+ * @fb_sizep: Returns size of frame buffer
+ * @pitchp: Returns number of bytes in each frame buffer line
+ * @return 0 if OK, -ve on error
+ */
+int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp,
+			     int pixel_order, int alpha_mode, ulong *fb_basep,
+			     ulong *fb_sizep, int *pitchp);
+
 #endif
diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c
index 17266c01a6..92e93ad9e5 100644
--- a/arch/arm/mach-bcm283x/msg.c
+++ b/arch/arm/mach-bcm283x/msg.c
@@ -27,6 +27,20 @@ struct msg_query {
 	u32 end_tag;
 };
 
+struct msg_setup {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
+	struct bcm2835_mbox_tag_virtual_w_h virtual_w_h;
+	struct bcm2835_mbox_tag_depth depth;
+	struct bcm2835_mbox_tag_pixel_order pixel_order;
+	struct bcm2835_mbox_tag_alpha_mode alpha_mode;
+	struct bcm2835_mbox_tag_virtual_offset virtual_offset;
+	struct bcm2835_mbox_tag_overscan overscan;
+	struct bcm2835_mbox_tag_allocate_buffer allocate_buffer;
+	struct bcm2835_mbox_tag_pitch pitch;
+	u32 end_tag;
+};
+
 int bcm2835_power_on_module(u32 module)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1);
@@ -91,3 +105,50 @@ int bcm2835_get_video_size(int *widthp, int *heightp)
 
 	return 0;
 }
+
+int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp,
+			     int pixel_order, int alpha_mode, ulong *fb_basep,
+			     ulong *fb_sizep, int *pitchp)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(struct msg_setup, msg_setup, 1);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg_setup);
+	BCM2835_MBOX_INIT_TAG(&msg_setup->physical_w_h, SET_PHYSICAL_W_H);
+	msg_setup->physical_w_h.body.req.width = *widthp;
+	msg_setup->physical_w_h.body.req.height = *heightp;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_w_h, SET_VIRTUAL_W_H);
+	msg_setup->virtual_w_h.body.req.width = *widthp;
+	msg_setup->virtual_w_h.body.req.height = *heightp;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->depth, SET_DEPTH);
+	msg_setup->depth.body.req.bpp = 32;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->pixel_order, SET_PIXEL_ORDER);
+	msg_setup->pixel_order.body.req.order = pixel_order;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->alpha_mode, SET_ALPHA_MODE);
+	msg_setup->alpha_mode.body.req.alpha = alpha_mode;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_offset, SET_VIRTUAL_OFFSET);
+	msg_setup->virtual_offset.body.req.x = 0;
+	msg_setup->virtual_offset.body.req.y = 0;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->overscan, SET_OVERSCAN);
+	msg_setup->overscan.body.req.top = 0;
+	msg_setup->overscan.body.req.bottom = 0;
+	msg_setup->overscan.body.req.left = 0;
+	msg_setup->overscan.body.req.right = 0;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->allocate_buffer, ALLOCATE_BUFFER);
+	msg_setup->allocate_buffer.body.req.alignment = 0x100;
+	BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_setup->pitch, GET_PITCH);
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_setup->hdr);
+	if (ret) {
+		printf("bcm2835: Could not configure display\n");
+		return ret;
+	}
+	*widthp = msg_setup->physical_w_h.body.resp.width;
+	*heightp = msg_setup->physical_w_h.body.resp.height;
+	*pitchp = msg_setup->pitch.body.resp.pitch;
+	*fb_basep = bus_to_phys(
+			msg_setup->allocate_buffer.body.resp.fb_address);
+	*fb_sizep = msg_setup->allocate_buffer.body.resp.fb_size;
+
+	return 0;
+}
diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c
index eb137be11c..cd15f7f32a 100644
--- a/drivers/video/bcm2835.c
+++ b/drivers/video/bcm2835.c
@@ -17,28 +17,13 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Global variables that lcd.c expects to exist */
 vidinfo_t panel_info;
 
-static u32 bcm2835_pitch;
-
-struct msg_setup {
-	struct bcm2835_mbox_hdr hdr;
-	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
-	struct bcm2835_mbox_tag_virtual_w_h virtual_w_h;
-	struct bcm2835_mbox_tag_depth depth;
-	struct bcm2835_mbox_tag_pixel_order pixel_order;
-	struct bcm2835_mbox_tag_alpha_mode alpha_mode;
-	struct bcm2835_mbox_tag_virtual_offset virtual_offset;
-	struct bcm2835_mbox_tag_overscan overscan;
-	struct bcm2835_mbox_tag_allocate_buffer allocate_buffer;
-	struct bcm2835_mbox_tag_pitch pitch;
-	u32 end_tag;
-};
+static int bcm2835_pitch;
 
 void lcd_ctrl_init(void *lcdbase)
 {
-	ALLOC_CACHE_ALIGN_BUFFER(struct msg_setup, msg_setup, 1);
 	int ret;
 	int w, h;
-	u32 fb_start, fb_end;
+	ulong fb_base, fb_size, fb_start, fb_end;
 
 	debug("bcm2835: Query resolution...\n");
 	ret = bcm2835_get_video_size(&w, &h);
@@ -48,42 +33,9 @@ void lcd_ctrl_init(void *lcdbase)
 	}
 
 	debug("bcm2835: Setting up display for %d x %d\n", w, h);
-
-	BCM2835_MBOX_INIT_HDR(msg_setup);
-	BCM2835_MBOX_INIT_TAG(&msg_setup->physical_w_h, SET_PHYSICAL_W_H);
-	msg_setup->physical_w_h.body.req.width = w;
-	msg_setup->physical_w_h.body.req.height = h;
-	BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_w_h, SET_VIRTUAL_W_H);
-	msg_setup->virtual_w_h.body.req.width = w;
-	msg_setup->virtual_w_h.body.req.height = h;
-	BCM2835_MBOX_INIT_TAG(&msg_setup->depth, SET_DEPTH);
-	msg_setup->depth.body.req.bpp = 32;
-	BCM2835_MBOX_INIT_TAG(&msg_setup->pixel_order, SET_PIXEL_ORDER);
-	msg_setup->pixel_order.body.req.order = BCM2835_MBOX_PIXEL_ORDER_RGB;
-	BCM2835_MBOX_INIT_TAG(&msg_setup->alpha_mode, SET_ALPHA_MODE);
-	msg_setup->alpha_mode.body.req.alpha = BCM2835_MBOX_ALPHA_MODE_IGNORED;
-	BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_offset, SET_VIRTUAL_OFFSET);
-	msg_setup->virtual_offset.body.req.x = 0;
-	msg_setup->virtual_offset.body.req.y = 0;
-	BCM2835_MBOX_INIT_TAG(&msg_setup->overscan, SET_OVERSCAN);
-	msg_setup->overscan.body.req.top = 0;
-	msg_setup->overscan.body.req.bottom = 0;
-	msg_setup->overscan.body.req.left = 0;
-	msg_setup->overscan.body.req.right = 0;
-	BCM2835_MBOX_INIT_TAG(&msg_setup->allocate_buffer, ALLOCATE_BUFFER);
-	msg_setup->allocate_buffer.body.req.alignment = 0x100;
-	BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_setup->pitch, GET_PITCH);
-
-	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_setup->hdr);
-	if (ret) {
-		printf("bcm2835: Could not configure display\n");
-		/* FIXME: How to disable the LCD to prevent errors? hang()? */
-		return;
-	}
-
-	w = msg_setup->physical_w_h.body.resp.width;
-	h = msg_setup->physical_w_h.body.resp.height;
-	bcm2835_pitch = msg_setup->pitch.body.resp.pitch;
+	ret = bcm2835_set_video_params(&w, &h, 32, BCM2835_MBOX_PIXEL_ORDER_RGB,
+				       BCM2835_MBOX_ALPHA_MODE_IGNORED,
+				       &fb_base, &fb_size, &bcm2835_pitch);
 
 	debug("bcm2835: Final resolution is %d x %d\n", w, h);
 
@@ -91,15 +43,14 @@ void lcd_ctrl_init(void *lcdbase)
 	panel_info.vl_row = h;
 	panel_info.vl_bpix = LCD_COLOR32;
 
-	gd->fb_base = bus_to_phys(
-		msg_setup->allocate_buffer.body.resp.fb_address);
+	gd->fb_base = fb_base;
 
 	/* Enable dcache for the frame buffer */
-	fb_start = gd->fb_base & ~(MMU_SECTION_SIZE - 1);
-	fb_end = gd->fb_base + msg_setup->allocate_buffer.body.resp.fb_size;
+	fb_start = fb_base & ~(MMU_SECTION_SIZE - 1);
+	fb_end = fb_base + fb_size;
 	fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT);
 	mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start,
-		DCACHE_WRITEBACK);
+					DCACHE_WRITEBACK);
 	lcd_set_flush_dcache(1);
 }
 
@@ -110,5 +61,6 @@ void lcd_enable(void)
 int lcd_get_size(int *line_length)
 {
 	*line_length = bcm2835_pitch;
+
 	return *line_length * panel_info.vl_row;
 }
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 15/18] dm: video: Refactor lcd_simplefb to prepare for driver model
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (13 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 14/18] video: arm: rpi: Move the video settings " Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 16/18] dm: video: Add driver-model support to lcd_simplefb Simon Glass
                   ` (2 subsequent siblings)
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Adjust this function so that we can convert it to support CONFIG_DM_VIDEO
without a lot of code duplication.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 common/lcd_simplefb.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/common/lcd_simplefb.c b/common/lcd_simplefb.c
index 2ba00f6d34..e479b492b8 100644
--- a/common/lcd_simplefb.c
+++ b/common/lcd_simplefb.c
@@ -16,17 +16,28 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static int lcd_dt_simplefb_configure_node(void *blob, int off)
 {
-	int vl_col = lcd_get_pixel_width();
-	int vl_row = lcd_get_pixel_height();
-#if LCD_BPP == LCD_COLOR16
-	return fdt_setup_simplefb_node(blob, off, gd->fb_base, vl_col, vl_row,
-				       vl_col * 2, "r5g6b5");
-#elif LCD_BPP == LCD_COLOR32
-	return fdt_setup_simplefb_node(blob, off, gd->fb_base, vl_col, vl_row,
-				       vl_col * 4, "a8r8g8b8");
-#else
-	return -1;
-#endif
+	int xsize, ysize;
+	int bpix; /* log2 of bits per pixel */
+	const char *name;
+	ulong fb_base;
+
+	xsize = lcd_get_pixel_width();
+	ysize = lcd_get_pixel_height();
+	bpix = LCD_BPP;
+	fb_base = gd->fb_base;
+	switch (bpix) {
+	case 4: /* VIDEO_BPP16 */
+		name = "r5g6b5";
+		break;
+	case 5: /* VIDEO_BPP32 */
+		name = "a8r8g8b8";
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return fdt_setup_simplefb_node(blob, off, fb_base, xsize, ysize,
+				       xsize * (1 << bpix) / 8, name);
 }
 
 int lcd_dt_simplefb_add_node(void *blob)
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 16/18] dm: video: Add driver-model support to lcd_simplefb
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (14 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 15/18] dm: video: Refactor lcd_simplefb to prepare for driver model Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 17/18] dm: video: arm: rpi: Convert to use driver model for video Simon Glass
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 18/18] arm: rpi: Add a TODO to move all messages into the msg handler Simon Glass
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Allow this to work with CONFIG_DM_VIDEO enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 common/lcd_simplefb.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/common/lcd_simplefb.c b/common/lcd_simplefb.c
index e479b492b8..d7e9fc9f65 100644
--- a/common/lcd_simplefb.c
+++ b/common/lcd_simplefb.c
@@ -8,9 +8,11 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <lcd.h>
 #include <fdt_support.h>
 #include <libfdt.h>
+#include <video.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -20,11 +22,27 @@ static int lcd_dt_simplefb_configure_node(void *blob, int off)
 	int bpix; /* log2 of bits per pixel */
 	const char *name;
 	ulong fb_base;
+#ifdef CONFIG_DM_VIDEO
+	struct video_uc_platdata *plat;
+	struct video_priv *uc_priv;
+	struct udevice *dev;
+	int ret;
 
+	ret = uclass_first_device_err(UCLASS_VIDEO, &dev);
+	if (ret)
+		return ret;
+	uc_priv = dev_get_uclass_priv(dev);
+	plat = dev_get_uclass_platdata(dev);
+	xsize = uc_priv->xsize;
+	ysize = uc_priv->ysize;
+	bpix = uc_priv->bpix;
+	fb_base = plat->base;
+#else
 	xsize = lcd_get_pixel_width();
 	ysize = lcd_get_pixel_height();
 	bpix = LCD_BPP;
 	fb_base = gd->fb_base;
+#endif
 	switch (bpix) {
 	case 4: /* VIDEO_BPP16 */
 		name = "r5g6b5";
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 17/18] dm: video: arm: rpi: Convert to use driver model for video
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (15 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 16/18] dm: video: Add driver-model support to lcd_simplefb Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 18/18] arm: rpi: Add a TODO to move all messages into the msg handler Simon Glass
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

Adjust the video driver to work with driver model and move over existing
baords. There is no need to keep the old code.

We can also drop setting of CONFIG_FB_ADDR since driver model doesn't have
this problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

 configs/rpi_2_defconfig     |  2 +-
 configs/rpi_3_32b_defconfig |  2 +-
 configs/rpi_3_defconfig     |  2 +-
 configs/rpi_defconfig       |  2 +-
 drivers/video/bcm2835.c     | 62 ++++++++++++++++++++-------------------------
 include/configs/rpi.h       | 11 ++------
 6 files changed, 34 insertions(+), 47 deletions(-)

diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
index f8f123c4a6..e492468a84 100644
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -21,6 +21,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
 CONFIG_CONSOLE_SCROLL_LINES=10
-CONFIG_LCD=y
 CONFIG_PHYS_TO_BUS=y
diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
index 3ff932c361..efcc23e5f4 100644
--- a/configs/rpi_3_32b_defconfig
+++ b/configs/rpi_3_32b_defconfig
@@ -23,6 +23,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
 CONFIG_CONSOLE_SCROLL_LINES=10
-CONFIG_LCD=y
 CONFIG_PHYS_TO_BUS=y
diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
index 98d7bd2c50..8f39d32cd6 100644
--- a/configs/rpi_3_defconfig
+++ b/configs/rpi_3_defconfig
@@ -23,6 +23,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
 CONFIG_CONSOLE_SCROLL_LINES=10
-CONFIG_LCD=y
 CONFIG_PHYS_TO_BUS=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 23d540d129..62a1d981e9 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -21,6 +21,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
 CONFIG_CONSOLE_SCROLL_LINES=10
-CONFIG_LCD=y
 CONFIG_PHYS_TO_BUS=y
diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c
index cd15f7f32a..952ef59661 100644
--- a/drivers/video/bcm2835.c
+++ b/drivers/video/bcm2835.c
@@ -5,62 +5,56 @@
  */
 
 #include <common.h>
-#include <lcd.h>
-#include <memalign.h>
-#include <phys2bus.h>
+#include <dm.h>
+#include <video.h>
 #include <asm/arch/mbox.h>
 #include <asm/arch/msg.h>
-#include <asm/global_data.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Global variables that lcd.c expects to exist */
-vidinfo_t panel_info;
-
-static int bcm2835_pitch;
-
-void lcd_ctrl_init(void *lcdbase)
+static int bcm2835_video_probe(struct udevice *dev)
 {
+	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
 	int ret;
-	int w, h;
+	int w, h, pitch;
 	ulong fb_base, fb_size, fb_start, fb_end;
 
 	debug("bcm2835: Query resolution...\n");
 	ret = bcm2835_get_video_size(&w, &h);
-	if (ret) {
-		/* FIXME: How to disable the LCD to prevent errors? hang()? */
-		return;
-	}
+	if (ret)
+		return -EIO;
 
 	debug("bcm2835: Setting up display for %d x %d\n", w, h);
 	ret = bcm2835_set_video_params(&w, &h, 32, BCM2835_MBOX_PIXEL_ORDER_RGB,
 				       BCM2835_MBOX_ALPHA_MODE_IGNORED,
-				       &fb_base, &fb_size, &bcm2835_pitch);
+				       &fb_base, &fb_size, &pitch);
 
 	debug("bcm2835: Final resolution is %d x %d\n", w, h);
 
-	panel_info.vl_col = w;
-	panel_info.vl_row = h;
-	panel_info.vl_bpix = LCD_COLOR32;
-
-	gd->fb_base = fb_base;
-
 	/* Enable dcache for the frame buffer */
 	fb_start = fb_base & ~(MMU_SECTION_SIZE - 1);
 	fb_end = fb_base + fb_size;
 	fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT);
 	mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start,
 					DCACHE_WRITEBACK);
-	lcd_set_flush_dcache(1);
-}
+	video_set_flush_dcache(dev, true);
 
-void lcd_enable(void)
-{
-}
+	uc_priv->xsize = w;
+	uc_priv->ysize = h;
+	uc_priv->bpix = VIDEO_BPP32;
+	plat->base = fb_base;
+	plat->size = fb_size;
 
-int lcd_get_size(int *line_length)
-{
-	*line_length = bcm2835_pitch;
-
-	return *line_length * panel_info.vl_row;
+	return 0;
 }
+
+static const struct udevice_id bcm2835_video_ids[] = {
+	{ .compatible = "brcm,bcm2835-hdmi" },
+	{ }
+};
+
+U_BOOT_DRIVER(bcm2835_video) = {
+	.name	= "bcm2835_video",
+	.id	= UCLASS_VIDEO,
+	.of_match = bcm2835_video_ids,
+	.probe	= bcm2835_video_probe,
+};
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index f96ee46794..bebb79897b 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -68,13 +68,6 @@
 #define CONFIG_BCM2835_GPIO
 /* LCD */
 #define CONFIG_LCD_DT_SIMPLEFB
-#define LCD_BPP				LCD_COLOR32
-/*
- * Prevent allocation of RAM for FB; the real FB address is queried
- * dynamically from the VideoCore co-processor, and comes from RAM
- * not owned by the ARM CPU.
- */
-#define CONFIG_FB_ADDR			0
 #define CONFIG_VIDEO_BCM2835
 #define CONFIG_SYS_WHITE_ON_BLACK
 
@@ -125,8 +118,8 @@
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define ENV_DEVICE_SETTINGS \
 	"stdin=serial,usbkbd\0" \
-	"stdout=serial,lcd\0" \
-	"stderr=serial,lcd\0"
+	"stdout=serial,vidconsole\0" \
+	"stderr=serial,vidconsole\0"
 
 /*
  * Memory layout for where various images get loaded by boot scripts:
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 18/18] arm: rpi: Add a TODO to move all messages into the msg handler
  2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
                   ` (16 preceding siblings ...)
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 17/18] dm: video: arm: rpi: Convert to use driver model for video Simon Glass
@ 2017-04-05 22:23 ` Simon Glass
  2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
  17 siblings, 1 reply; 37+ messages in thread
From: Simon Glass @ 2017-04-05 22:23 UTC (permalink / raw)
  To: u-boot

The board code should all move into msg.c for consistency. Add a TODO for
this.

Signed-off-by: Simon Glass <sjg@chromium.org>

---

Changes in v6:
- Drop changes to dwc2.c now we have http://patchwork.ozlabs.org/patch/746917/
- Rebase to master

Changes in v5:
- Rebase to master

Changes in v4:
- Add patches to convert video and MMC to driver model also
- Rebase to master

Changes in v3:
- Drop applied patches from series
- Drop patch to introduce usbethaddr for driver model

 board/raspberrypi/rpi/rpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 1fb7ba05ff..c99beedc49 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -29,7 +29,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* From lowlevel_init.S */
 extern unsigned long fw_dtb_pointer;
 
-
+/* TODO(sjg at chromium.org): Move these to the msg.c file */
 struct msg_get_arm_mem {
 	struct bcm2835_mbox_hdr hdr;
 	struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
-- 
2.12.2.715.g7642488e1d-goog

^ permalink raw reply related	[flat|nested] 37+ messages in thread
* [U-Boot] [PATCH v6 02/18] dm: mmc: Set up the MMC device when controller is probed
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 02/18] dm: mmc: Set up the MMC device when controller is probed Simon Glass
@ 2017-04-24  2:11   ` Simon Glass
  0 siblings, 0 replies; 37+ messages in thread
From: Simon Glass @ 2017-04-24  2:11 UTC (permalink / raw)
  To: u-boot

Hi,

On 5 April 2017 at 16:23, Simon Glass <sjg@chromium.org> wrote:
> When an MMC controller is set up we should probe the device to find out
> what it is. This includes finding its capacity and reading its partition
> table.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
> ---
>
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
>
>  drivers/mmc/mmc-uclass.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)

I think I have a better way of doing this, so I'm withdrawing this
patch. I'll send a series with my ideas.

Regards,
Simon

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 01/18] net: smsc95xx: Correct free_pkt() implementation
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 01/18] net: smsc95xx: Correct free_pkt() implementation Simon Glass
@ 2017-05-10 17:51   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:51 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:28PM -0600, Simon Glass wrote:

> On further review this returns the wrong packet length from the driver.
> It may not be noticed since protocols will take care of it. Fix it by
> subtracting the header length from the packet length returned.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/a92ee9ca/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 03/18] dm: video: Correct line clearing code
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 03/18] dm: video: Correct line clearing code Simon Glass
@ 2017-05-10 17:51   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:51 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:30PM -0600, Simon Glass wrote:

> At present we clear many more bytes than we should on 16bpp and 32bpp
> displays. The number of pixels to clear is currently calculated as the
> line length (in bytes) multiplied by the number of lines to clear. This
> is only correct for 8bpp displays.
> 
> Correct the calculation to use the number of text columns multiplied by
> the width of each character multiplied by the number of lines to clear.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Acked-by: Anatolij Gustschin <agust@denx.de>

This has been deferred as another change:
commit 7682736c891d2b6f0cce167f4ecd55d2df0f562f
Author: eric.gao at rock-chips.com <eric.gao@rock-chips.com>
Date:   Mon Apr 10 10:02:20 2017 +0800

    video: Fix crash when scroll screen

also fixed the problem and has since gone in.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/627f0e73/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 04/18] string: Use memcpy() within memmove() when we can
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 04/18] string: Use memcpy() within memmove() when we can Simon Glass
@ 2017-05-10 17:51   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:51 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:31PM -0600, Simon Glass wrote:

> A common use of memmove() can be handled by memcpy(). Also memcpy()
> includes an optimisation for large sizes: it copies a word at a time. So
> we can get a speed-up by calling memcpy() to handle our move in this case.
> 
> Update memmove() to call memcpy() if the destination is before the source.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/860b72e8/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 05/18] arm: rpi: Drop the GPIO device addresses
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 05/18] arm: rpi: Drop the GPIO device addresses Simon Glass
@ 2017-05-10 17:51   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:51 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:32PM -0600, Simon Glass wrote:

> We can rely on the device tree to provide this information.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/2c56a9d3/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot,v6,06/18] arm: rpi: Drop CONFIG_CONS_INDEX
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 06/18] arm: rpi: Drop CONFIG_CONS_INDEX Simon Glass
@ 2017-05-10 17:51   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:51 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:33PM -0600, Simon Glass wrote:

> This is not needed now that serial uses driver model.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/37ea0b8a/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 07/18] dm: arm: rpi: Move to driver model for USB
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 07/18] dm: arm: rpi: Move to driver model for USB Simon Glass
@ 2017-05-10 17:51   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:51 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:34PM -0600, Simon Glass wrote:

> Start using driver model for USB on the Raspberry Pi. The dwc2 supports
> this now so this is just a config change.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/e72157fc/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 08/18] dm: arm: rpi: Use driver model for Ethernet
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 08/18] dm: arm: rpi: Use driver model for Ethernet Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:35PM -0600, Simon Glass wrote:

> Enable CONFIG_DM_ETH so that driver model is used for the USB Ethernet
> device.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/34a7c3b5/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 09/18] arm: rpi: Add a file to handle messages
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 09/18] arm: rpi: Add a file to handle messages Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:36PM -0600, Simon Glass wrote:

> The bcm283x chips provide a way for the ARM core to communicate with the
> graphics processor, which is in charge of many things. This is handled by
> way of a message prototcol.
> 
> At present the code for sending message (and receiving a reply) is spread
> around U-Boot, primarily in the board file. This means that sending a
> message from a driver requires duplicating the code.
> 
> Create a new message implementation with a function to support powering on
> a subsystem as a starting point.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/7c500169/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 10/18] arm: rpi: Add a function to obtain the MMC clock
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 10/18] arm: rpi: Add a function to obtain the MMC clock Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:37PM -0600, Simon Glass wrote:

> Move this code into the new message handler file.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/82ace841/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 11/18] dm: mmc: rpi: Convert Raspberry Pi to driver model for MMC
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 11/18] dm: mmc: rpi: Convert Raspberry Pi to driver model for MMC Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:38PM -0600, Simon Glass wrote:

> Convert the bcm2835 SDHCI driver over to support CONFIG_DM_MMC and move
> all boards over. There is no need to keep the old code since there are no
> other users.
> 
> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/93526b14/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot,v6,12/18] dm: arm: rpi: Drop CONFIG_OF_EMBED
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 12/18] dm: arm: rpi: Drop CONFIG_OF_EMBED Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:39PM -0600, Simon Glass wrote:

> We should not use an embedded device tree on a production board. There
> does not seem to be any reason for it in commit 7670909. So drop this.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/445c538e/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 13/18] video: arm: rpi: Move the video query out of the driver
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 13/18] video: arm: rpi: Move the video query out of the driver Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:40PM -0600, Simon Glass wrote:

> Add a function to get the video size to the msg handler and remove it from
> the video driver.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Acked-by: Anatolij Gustschin <agust@denx.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/81f2a873/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 14/18] video: arm: rpi: Move the video settings out of the driver
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 14/18] video: arm: rpi: Move the video settings " Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:41PM -0600, Simon Glass wrote:

> Add a function to set the video parameters to the msg handler and remove
> it from the video driver.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Acked-by: Anatolij Gustschin <agust@denx.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/cba2fe24/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 15/18] dm: video: Refactor lcd_simplefb to prepare for driver model
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 15/18] dm: video: Refactor lcd_simplefb to prepare for driver model Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:42PM -0600, Simon Glass wrote:

> Adjust this function so that we can convert it to support CONFIG_DM_VIDEO
> without a lot of code duplication.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Acked-by: Anatolij Gustschin <agust@denx.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/a73d49c6/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 16/18] dm: video: Add driver-model support to lcd_simplefb
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 16/18] dm: video: Add driver-model support to lcd_simplefb Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:43PM -0600, Simon Glass wrote:

> Allow this to work with CONFIG_DM_VIDEO enabled.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Acked-by: Anatolij Gustschin <agust@denx.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/ca225e93/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 17/18] dm: video: arm: rpi: Convert to use driver model for video
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 17/18] dm: video: arm: rpi: Convert to use driver model for video Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:44PM -0600, Simon Glass wrote:

> Adjust the video driver to work with driver model and move over existing
> baords. There is no need to keep the old code.
> 
> We can also drop setting of CONFIG_FB_ADDR since driver model doesn't have
> this problem.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Acked-by: Anatolij Gustschin <agust@denx.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/b85bbcbf/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
* [U-Boot] [U-Boot, v6, 18/18] arm: rpi: Add a TODO to move all messages into the msg handler
  2017-04-05 22:23 ` [U-Boot] [PATCH v6 18/18] arm: rpi: Add a TODO to move all messages into the msg handler Simon Glass
@ 2017-05-10 17:52   ` Tom Rini
  0 siblings, 0 replies; 37+ messages in thread
From: Tom Rini @ 2017-05-10 17:52 UTC (permalink / raw)
  To: u-boot

On Wed, Apr 05, 2017 at 04:23:45PM -0600, Simon Glass wrote:

> The board code should all move into msg.c for consistency. Add a TODO for
> this.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/d096e6b9/attachment.sig>

^ permalink raw reply	[flat|nested] 37+ messages in thread
end of thread, other threads:[~2017-05-10 17:52 UTC | newest]

Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-05 22:23 [U-Boot] [PATCH v6 00/18] arm: rpi: Enable USB, Ethernet, MMC, Video driver model on Raspberry Pi Simon Glass
2017-04-05 22:23 ` [U-Boot] [PATCH v6 01/18] net: smsc95xx: Correct free_pkt() implementation Simon Glass
2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 02/18] dm: mmc: Set up the MMC device when controller is probed Simon Glass
2017-04-24  2:11   ` Simon Glass
2017-04-05 22:23 ` [U-Boot] [PATCH v6 03/18] dm: video: Correct line clearing code Simon Glass
2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 04/18] string: Use memcpy() within memmove() when we can Simon Glass
2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 05/18] arm: rpi: Drop the GPIO device addresses Simon Glass
2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 06/18] arm: rpi: Drop CONFIG_CONS_INDEX Simon Glass
2017-05-10 17:51   ` [U-Boot] [U-Boot,v6,06/18] " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 07/18] dm: arm: rpi: Move to driver model for USB Simon Glass
2017-05-10 17:51   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 08/18] dm: arm: rpi: Use driver model for Ethernet Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 09/18] arm: rpi: Add a file to handle messages Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 10/18] arm: rpi: Add a function to obtain the MMC clock Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 11/18] dm: mmc: rpi: Convert Raspberry Pi to driver model for MMC Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 12/18] dm: arm: rpi: Drop CONFIG_OF_EMBED Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot,v6,12/18] " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 13/18] video: arm: rpi: Move the video query out of the driver Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 14/18] video: arm: rpi: Move the video settings " Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 15/18] dm: video: Refactor lcd_simplefb to prepare for driver model Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 16/18] dm: video: Add driver-model support to lcd_simplefb Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 17/18] dm: video: arm: rpi: Convert to use driver model for video Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini
2017-04-05 22:23 ` [U-Boot] [PATCH v6 18/18] arm: rpi: Add a TODO to move all messages into the msg handler Simon Glass
2017-05-10 17:52   ` [U-Boot] [U-Boot, v6, " Tom Rini

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.