[RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Sebastian Andrzej Siewior]

In commit 4b53a3412d66 ("sched/core: Remove the tsk_nr_cpus_allowed()
wrapper") the tsk_nr_cpus_allowed() wrapper was removed. There was not
much difference in !RT but in RT we used this to implement
migrate_disable(). Within a migrate_disable() section the CPU mask is
restricted to single CPU while the "normal" CPU mask remains untouched.

As an alternative implementation Ingo suggested to use
	struct task_struct {
		const cpumask_t		*cpus_ptr;
		cpumask_t		cpus_mask;
        };
with
	t->cpus_allowed_ptr = &t->cpus_allowed;

In -RT we then can switch the cpus_ptr to
	t->cpus_allowed_ptr = &cpumask_of(task_cpu(p));

in a migration disabled region. The rules are simple:
- Code that 'uses' ->cpus_allowed would use the pointer.
- Code that 'modifies' ->cpus_allowed would use the direct mask.

While converting the existing users I tried to stick with the rules
above however… well mostly CPUFREQ tries to temporary switch the CPU
mask to do something on a certain CPU and then switches the mask back it
its original value. So in theory `cpus_ptr' could or should be used.
However if this is invoked in a migration disabled region (which is not
the case because it would require something like preempt_disable() and
set_cpus_allowed_ptr() might sleep so it can't be) then the "restore"
part would restore the wrong mask. So it only looks strange and I go for
the pointer…

Some drivers copy the cpumask without cpumask_copy() and others use
cpumask_copy but without alloc_cpumask_var(). I did not fix those as
part of this, could do this as a follow up…

So is this the way we want it?
Is the usage of `cpus_ptr' vs `cpus_mask' for the set + restore part
(see cpufreq users) what we want? At some point it looks like they
should use a different interface for their doing. I am not sure why
switching to certain CPU is important but maybe it could be done via a
workqueue from the CPUFREQ core (so we have a comment desribing why are
doing this and a get_online_cpus() to ensure that the CPU does not go
offline too early).

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/ia64/kernel/mca.c                     |  2 +-
 arch/ia64/kernel/salinfo.c                 |  2 +-
 arch/ia64/kernel/topology.c                |  2 +-
 arch/ia64/sn/kernel/sn2/sn_hwperf.c        |  2 +-
 arch/mips/include/asm/switch_to.h          |  4 +--
 arch/mips/kernel/mips-mt-fpaff.c           |  2 +-
 arch/mips/kernel/traps.c                   |  6 ++---
 arch/powerpc/kernel/smp.c                  |  2 +-
 arch/powerpc/platforms/cell/spufs/sched.c  |  2 +-
 arch/sparc/kernel/sysfs.c                  |  2 +-
 arch/tile/include/asm/setup.h              |  2 +-
 arch/tile/kernel/hardwall.c                | 10 +++----
 drivers/acpi/processor_throttling.c        |  2 +-
 drivers/cpufreq/ia64-acpi-cpufreq.c        |  4 +--
 drivers/cpufreq/sh-cpufreq.c               |  2 +-
 drivers/cpufreq/sparc-us2e-cpufreq.c       |  4 +--
 drivers/cpufreq/sparc-us3-cpufreq.c        |  4 +--
 drivers/crypto/n2_core.c                   |  2 +-
 drivers/infiniband/hw/hfi1/affinity.c      |  6 ++---
 drivers/infiniband/hw/hfi1/sdma.c          |  3 +--
 drivers/infiniband/hw/qib/qib_file_ops.c   |  7 +++--
 fs/proc/array.c                            |  4 +--
 include/linux/init_task.h                  |  3 ++-
 include/linux/sched.h                      |  5 ++--
 kernel/cgroup/cpuset.c                     |  2 +-
 kernel/sched/core.c                        | 42 +++++++++++++++---------------
 kernel/sched/cpudeadline.c                 |  4 +--
 kernel/sched/cpupri.c                      |  4 +--
 kernel/sched/deadline.c                    |  6 ++---
 kernel/sched/fair.c                        | 28 ++++++++++----------
 kernel/sched/rt.c                          |  4 +--
 kernel/trace/trace_hwlat.c                 |  2 +-
 lib/smp_processor_id.c                     |  2 +-
 samples/trace_events/trace-events-sample.c |  2 +-
 34 files changed, 90 insertions(+), 90 deletions(-)

diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 79c7c46d7dc1..f5f116e1a504 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1824,7 +1824,7 @@ format_mca_init_stack(void *mca_data, unsigned long offset,
 	ti->cpu = cpu;
 	p->stack = ti;
 	p->state = TASK_UNINTERRUPTIBLE;
-	cpumask_set_cpu(cpu, &p->cpus_allowed);
+	cpumask_set_cpu(cpu, &p->cpus_mask);
 	INIT_LIST_HEAD(&p->tasks);
 	p->parent = p->real_parent = p->group_leader = p;
 	INIT_LIST_HEAD(&p->children);
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index d194d5c83d32..382c1cdc28f5 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -383,7 +383,7 @@ salinfo_log_release(struct inode *inode, struct file *file)
 static void
 call_on_cpu(int cpu, void (*fn)(void *), void *arg)
 {
-	cpumask_t save_cpus_allowed = current->cpus_allowed;
+	cpumask_t save_cpus_allowed = current->cpus_mask;
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	(*fn)(arg);
 	set_cpus_allowed_ptr(current, &save_cpus_allowed);
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 1a68f012a6dc..62684276abeb 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -360,7 +360,7 @@ static int cache_add_dev(unsigned int cpu)
 	if (all_cpu_cache_info[cpu].kobj.parent)
 		return 0;
 
-	oldmask = current->cpus_allowed;
+	oldmask = current->cpus_mask;
 	retval = set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	if (unlikely(retval))
 		return retval;
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 52704f199dd6..3c9a3c9b0ee7 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -632,7 +632,7 @@ static int sn_hwperf_op_cpu(struct sn_hwperf_op_info *op_info)
 		}
 		else {
 			/* migrate the task before calling SAL */ 
-			save_allowed = current->cpus_allowed;
+			save_allowed = current->cpus_mask;
 			set_cpus_allowed_ptr(current, cpumask_of(cpu));
 			sn_hwperf_call_sal(op_info);
 			set_cpus_allowed_ptr(current, &save_allowed);
diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h
index e610473d61b8..1428b4febbc9 100644
--- a/arch/mips/include/asm/switch_to.h
+++ b/arch/mips/include/asm/switch_to.h
@@ -42,7 +42,7 @@ extern struct task_struct *ll_task;
  * inline to try to keep the overhead down. If we have been forced to run on
  * a "CPU" with an FPU because of a previous high level of FP computation,
  * but did not actually use the FPU during the most recent time-slice (CU1
- * isn't set), we undo the restriction on cpus_allowed.
+ * isn't set), we undo the restriction on cpus_mask.
  *
  * We're not calling set_cpus_allowed() here, because we have no need to
  * force prompt migration - we're already switching the current CPU to a
@@ -57,7 +57,7 @@ do {									\
 	    test_ti_thread_flag(__prev_ti, TIF_FPUBOUND) &&		\
 	    (!(KSTK_STATUS(prev) & ST0_CU1))) {				\
 		clear_ti_thread_flag(__prev_ti, TIF_FPUBOUND);		\
-		prev->cpus_allowed = prev->thread.user_cpus_allowed;	\
+		prev->cpus_mask = prev->thread.user_cpus_allowed;	\
 	}								\
 	next->thread.emulated_fp = 0;					\
 } while(0)
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index 8cab633e0e5a..f64555ea9068 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -176,7 +176,7 @@ asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
 	if (retval)
 		goto out_unlock;
 
-	cpumask_or(&allowed, &p->thread.user_cpus_allowed, &p->cpus_allowed);
+	cpumask_or(&allowed, &p->thread.user_cpus_allowed, p->cpus_ptr);
 	cpumask_and(&mask, &allowed, cpu_active_mask);
 
 out_unlock:
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index c7d17cfb32f6..d77e79e03bd0 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1191,12 +1191,12 @@ static void mt_ase_fp_affinity(void)
 		 * restricted the allowed set to exclude any CPUs with FPUs,
 		 * we'll skip the procedure.
 		 */
-		if (cpumask_intersects(&current->cpus_allowed, &mt_fpu_cpumask)) {
+		if (cpumask_intersects(&current->cpus_mask, &mt_fpu_cpumask)) {
 			cpumask_t tmask;
 
 			current->thread.user_cpus_allowed
-				= current->cpus_allowed;
-			cpumask_and(&tmask, &current->cpus_allowed,
+				= current->cpus_mask;
+			cpumask_and(&tmask, &current->cpus_mask,
 				    &mt_fpu_cpumask);
 			set_cpus_allowed_ptr(current, &tmask);
 			set_thread_flag(TIF_FPUBOUND);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 46f89e66a273..f7d2023023c5 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -796,7 +796,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	 * se we pin us down to CPU 0 for a short while
 	 */
 	alloc_cpumask_var(&old_mask, GFP_NOWAIT);
-	cpumask_copy(old_mask, &current->cpus_allowed);
+	cpumask_copy(old_mask, &current->cpus_mask);
 	set_cpus_allowed_ptr(current, cpumask_of(boot_cpuid));
 	
 	if (smp_ops && smp_ops->setup_cpu)
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 1fbb5da17dd2..ca86366d5424 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -141,7 +141,7 @@ void __spu_update_sched_info(struct spu_context *ctx)
 	 * runqueue. The context will be rescheduled on the proper node
 	 * if it is timesliced or preempted.
 	 */
-	cpumask_copy(&ctx->cpus_allowed, &current->cpus_allowed);
+	cpumask_copy(&ctx->cpus_allowed, current->cpus_ptr);
 
 	/* Save the current cpu id for spu interrupt routing. */
 	ctx->last_ran = raw_smp_processor_id();
diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c
index d63fc613e7a9..c3f9a4c9abf0 100644
--- a/arch/sparc/kernel/sysfs.c
+++ b/arch/sparc/kernel/sysfs.c
@@ -106,7 +106,7 @@ static unsigned long run_on_cpu(unsigned long cpu,
 	cpumask_t old_affinity;
 	unsigned long ret;
 
-	cpumask_copy(&old_affinity, &current->cpus_allowed);
+	cpumask_copy(&old_affinity, &current->cpus_mask);
 	/* should return -EINVAL to userspace */
 	if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
 		return 0;
diff --git a/arch/tile/include/asm/setup.h b/arch/tile/include/asm/setup.h
index 2a0347af0702..670fa2f4cfc3 100644
--- a/arch/tile/include/asm/setup.h
+++ b/arch/tile/include/asm/setup.h
@@ -49,7 +49,7 @@ int hardwall_ipi_valid(int cpu);
 
 /* Hook hardwall code into changes in affinity. */
 #define arch_set_cpus_allowed(p, new_mask) do { \
-	if (!cpumask_equal(&p->cpus_allowed, new_mask)) \
+	if (!cpumask_equal(p->cpus_ptr, new_mask)) \
 		hardwall_deactivate_all(p); \
 } while (0)
 #endif
diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c
index 2fd1694ac1d0..8cec2a88049d 100644
--- a/arch/tile/kernel/hardwall.c
+++ b/arch/tile/kernel/hardwall.c
@@ -590,12 +590,12 @@ static int hardwall_activate(struct hardwall_info *info)
 	 * Get our affinity; if we're not bound to this tile uniquely,
 	 * we can't access the network registers.
 	 */
-	if (cpumask_weight(&p->cpus_allowed) != 1)
+	if (p->nr_cpus_allowed != 1)
 		return -EPERM;
 
 	/* Make sure we are bound to a cpu assigned to this resource. */
 	cpu = smp_processor_id();
-	BUG_ON(cpumask_first(&p->cpus_allowed) != cpu);
+	BUG_ON(cpumask_first(p->cpus_ptr) != cpu);
 	if (!cpumask_test_cpu(cpu, &info->cpumask))
 		return -EINVAL;
 
@@ -621,17 +621,17 @@ static int hardwall_activate(struct hardwall_info *info)
  * Deactivate a task's hardwall.  Must hold lock for hardwall_type.
  * This method may be called from exit_thread(), so we don't want to
  * rely on too many fields of struct task_struct still being valid.
- * We assume the cpus_allowed, pid, and comm fields are still valid.
+ * We assume the nr_cpus_allowed, pid, and comm fields are still valid.
  */
 static void _hardwall_deactivate(struct hardwall_type *hwt,
 				 struct task_struct *task)
 {
 	struct thread_struct *ts = &task->thread;
 
-	if (cpumask_weight(&task->cpus_allowed) != 1) {
+	if (task->nr_cpus_allowed) != 1 {
 		pr_err("pid %d (%s) releasing %s hardwall with an affinity mask containing %d cpus!\n",
 		       task->pid, task->comm, hwt->name,
-		       cpumask_weight(&task->cpus_allowed));
+		       task->nr_cpus_allowed);
 		BUG();
 	}
 
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index a12f96cc93ff..a689b84721cc 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -918,7 +918,7 @@ static int acpi_processor_get_throttling(struct acpi_processor *pr)
 	/*
 	 * Migrate task to the cpu pointed by pr.
 	 */
-	cpumask_copy(saved_mask, &current->cpus_allowed);
+	cpumask_copy(saved_mask, &current->cpus_mask);
 	/* FIXME: use work_on_cpu() */
 	if (set_cpus_allowed_ptr(current, cpumask_of(pr->id))) {
 		/* Can't migrate to the target pr->id CPU. Exit */
diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c
index e28a31a40829..deb06ffbafb9 100644
--- a/drivers/cpufreq/ia64-acpi-cpufreq.c
+++ b/drivers/cpufreq/ia64-acpi-cpufreq.c
@@ -110,7 +110,7 @@ processor_get_freq (
 
 	pr_debug("processor_get_freq\n");
 
-	saved_mask = current->cpus_allowed;
+	saved_mask = current->cpus_mask;
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	if (smp_processor_id() != cpu)
 		goto migrate_end;
@@ -146,7 +146,7 @@ processor_set_freq (
 
 	pr_debug("processor_set_freq\n");
 
-	saved_mask = current->cpus_allowed;
+	saved_mask = current->cpus_mask;
 	set_cpus_allowed_ptr(current, cpumask_of(policy->cpu));
 	if (smp_processor_id() != policy->cpu) {
 		retval = -EAGAIN;
diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
index 86628e22b2a3..3a9432f9fb64 100644
--- a/drivers/cpufreq/sh-cpufreq.c
+++ b/drivers/cpufreq/sh-cpufreq.c
@@ -49,7 +49,7 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy,
 	struct device *dev;
 	long freq;
 
-	cpus_allowed = current->cpus_allowed;
+	cpus_allowed = current->cpus_mask;
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	BUG_ON(smp_processor_id() != cpu);
diff --git a/drivers/cpufreq/sparc-us2e-cpufreq.c b/drivers/cpufreq/sparc-us2e-cpufreq.c
index 35ddb6da93aa..db16a3c6386d 100644
--- a/drivers/cpufreq/sparc-us2e-cpufreq.c
+++ b/drivers/cpufreq/sparc-us2e-cpufreq.c
@@ -234,7 +234,7 @@ static unsigned int us2e_freq_get(unsigned int cpu)
 	cpumask_t cpus_allowed;
 	unsigned long clock_tick, estar;
 
-	cpumask_copy(&cpus_allowed, &current->cpus_allowed);
+	cpumask_copy(&cpus_allowed, &current->cpus_mask);
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	clock_tick = sparc64_get_clock_tick(cpu) / 1000;
@@ -252,7 +252,7 @@ static int us2e_freq_target(struct cpufreq_policy *policy, unsigned int index)
 	unsigned long clock_tick, divisor, old_divisor, estar;
 	cpumask_t cpus_allowed;
 
-	cpumask_copy(&cpus_allowed, &current->cpus_allowed);
+	cpumask_copy(&cpus_allowed, &current->cpus_mask);
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000;
diff --git a/drivers/cpufreq/sparc-us3-cpufreq.c b/drivers/cpufreq/sparc-us3-cpufreq.c
index a8d86a449ca1..603258602d03 100644
--- a/drivers/cpufreq/sparc-us3-cpufreq.c
+++ b/drivers/cpufreq/sparc-us3-cpufreq.c
@@ -82,7 +82,7 @@ static unsigned int us3_freq_get(unsigned int cpu)
 	unsigned long reg;
 	unsigned int ret;
 
-	cpumask_copy(&cpus_allowed, &current->cpus_allowed);
+	cpumask_copy(&cpus_allowed, &current->cpus_mask);
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	reg = read_safari_cfg();
@@ -99,7 +99,7 @@ static int us3_freq_target(struct cpufreq_policy *policy, unsigned int index)
 	unsigned long new_bits, new_freq, reg;
 	cpumask_t cpus_allowed;
 
-	cpumask_copy(&cpus_allowed, &current->cpus_allowed);
+	cpumask_copy(&cpus_allowed, &current->cpus_mask);
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	new_freq = sparc64_get_clock_tick(cpu) / 1000;
diff --git a/drivers/crypto/n2_core.c b/drivers/crypto/n2_core.c
index c5aac25a5738..b853951f8ef0 100644
--- a/drivers/crypto/n2_core.c
+++ b/drivers/crypto/n2_core.c
@@ -1642,7 +1642,7 @@ static int spu_queue_register(struct spu_queue *p, unsigned long q_type)
 	if (!alloc_cpumask_var(&old_allowed, GFP_KERNEL))
 		return -ENOMEM;
 
-	cpumask_copy(old_allowed, &current->cpus_allowed);
+	cpumask_copy(old_allowed, &current->cpus_mask);
 
 	set_cpus_allowed_ptr(current, &p->sharing);
 
diff --git a/drivers/infiniband/hw/hfi1/affinity.c b/drivers/infiniband/hw/hfi1/affinity.c
index e2cd2cd3b28a..822873226a19 100644
--- a/drivers/infiniband/hw/hfi1/affinity.c
+++ b/drivers/infiniband/hw/hfi1/affinity.c
@@ -576,7 +576,7 @@ int hfi1_get_proc_affinity(int node)
 	struct hfi1_affinity_node *entry;
 	cpumask_var_t diff, hw_thread_mask, available_mask, intrs_mask;
 	const struct cpumask *node_mask,
-		*proc_mask = &current->cpus_allowed;
+		*proc_mask = current->cpus_ptr;
 	struct hfi1_affinity_node_list *affinity = &node_affinity;
 	struct cpu_mask_set *set = &affinity->proc;
 
@@ -584,7 +584,7 @@ int hfi1_get_proc_affinity(int node)
 	 * check whether process/context affinity has already
 	 * been set
 	 */
-	if (cpumask_weight(proc_mask) == 1) {
+	if (current->nr_cpus_allowed == 1) {
 		hfi1_cdbg(PROC, "PID %u %s affinity set to CPU %*pbl",
 			  current->pid, current->comm,
 			  cpumask_pr_args(proc_mask));
@@ -595,7 +595,7 @@ int hfi1_get_proc_affinity(int node)
 		cpu = cpumask_first(proc_mask);
 		cpumask_set_cpu(cpu, &set->used);
 		goto done;
-	} else if (cpumask_weight(proc_mask) < cpumask_weight(&set->mask)) {
+	} else if (current->nr_cpus_allowed < cpumask_weight(&set->mask)) {
 		hfi1_cdbg(PROC, "PID %u %s affinity set to CPU set(s) %*pbl",
 			  current->pid, current->comm,
 			  cpumask_pr_args(proc_mask));
diff --git a/drivers/infiniband/hw/hfi1/sdma.c b/drivers/infiniband/hw/hfi1/sdma.c
index 5cde1ecda0fe..d8555c2d232c 100644
--- a/drivers/infiniband/hw/hfi1/sdma.c
+++ b/drivers/infiniband/hw/hfi1/sdma.c
@@ -856,14 +856,13 @@ struct sdma_engine *sdma_select_user_engine(struct hfi1_devdata *dd,
 {
 	struct sdma_rht_node *rht_node;
 	struct sdma_engine *sde = NULL;
-	const struct cpumask *current_mask = &current->cpus_allowed;
 	unsigned long cpu_id;
 
 	/*
 	 * To ensure that always the same sdma engine(s) will be
 	 * selected make sure the process is pinned to this CPU only.
 	 */
-	if (cpumask_weight(current_mask) != 1)
+	if (current->nr_cpus_allowed != 1)
 		goto out;
 
 	cpu_id = smp_processor_id();
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index 9396c1807cc3..a42fcd4735cb 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -1163,7 +1163,7 @@ static unsigned int qib_poll(struct file *fp, struct poll_table_struct *pt)
 static void assign_ctxt_affinity(struct file *fp, struct qib_devdata *dd)
 {
 	struct qib_filedata *fd = fp->private_data;
-	const unsigned int weight = cpumask_weight(&current->cpus_allowed);
+	const unsigned int weight = current->nr_cpus_allowed;
 	const struct cpumask *local_mask = cpumask_of_pcibus(dd->pcidev->bus);
 	int local_cpu;
 
@@ -1644,9 +1644,8 @@ static int qib_assign_ctxt(struct file *fp, const struct qib_user_info *uinfo)
 		ret = find_free_ctxt(i_minor - 1, fp, uinfo);
 	else {
 		int unit;
-		const unsigned int cpu = cpumask_first(&current->cpus_allowed);
-		const unsigned int weight =
-			cpumask_weight(&current->cpus_allowed);
+		const unsigned int cpu = cpumask_first(current->cpus_ptr);
+		const unsigned int weight = current->nr_cpus_allowed;
 
 		if (weight == 1 && !test_bit(cpu, qib_cpulist))
 			if (!find_hca(cpu, &unit) && unit >= 0)
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 88c355574aa0..5fe112bce201 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -364,9 +364,9 @@ static inline void task_context_switch_counts(struct seq_file *m,
 static void task_cpus_allowed(struct seq_file *m, struct task_struct *task)
 {
 	seq_printf(m, "Cpus_allowed:\t%*pb\n",
-		   cpumask_pr_args(&task->cpus_allowed));
+		   cpumask_pr_args(task->cpus_ptr));
 	seq_printf(m, "Cpus_allowed_list:\t%*pbl\n",
-		   cpumask_pr_args(&task->cpus_allowed));
+		   cpumask_pr_args(task->cpus_ptr));
 }
 
 int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 91d9049f0039..d17c35006048 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -225,7 +225,8 @@ extern struct cred init_cred;
 	.static_prio	= MAX_PRIO-20,					\
 	.normal_prio	= MAX_PRIO-20,					\
 	.policy		= SCHED_NORMAL,					\
-	.cpus_allowed	= CPU_MASK_ALL,					\
+	.cpus_ptr	= &tsk.cpus_mask,				\
+	.cpus_mask	= CPU_MASK_ALL,					\
 	.nr_cpus_allowed= NR_CPUS,					\
 	.mm		= NULL,						\
 	.active_mm	= &init_mm,					\
diff --git a/include/linux/sched.h b/include/linux/sched.h
index d67eee84fd43..01b22549404b 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -535,7 +535,8 @@ struct task_struct {
 
 	unsigned int			policy;
 	int				nr_cpus_allowed;
-	cpumask_t			cpus_allowed;
+	const cpumask_t			*cpus_ptr;
+	cpumask_t			cpus_mask;
 
 #ifdef CONFIG_PREEMPT_RCU
 	int				rcu_read_lock_nesting;
@@ -1218,7 +1219,7 @@ extern struct pid *cad_pid;
 #define PF_KTHREAD		0x00200000	/* I am a kernel thread */
 #define PF_RANDOMIZE		0x00400000	/* Randomize virtual address space */
 #define PF_SWAPWRITE		0x00800000	/* Allowed to write to swap */
-#define PF_NO_SETAFFINITY	0x04000000	/* Userland is not allowed to meddle with cpus_allowed */
+#define PF_NO_SETAFFINITY	0x04000000	/* Userland is not allowed to meddle with cpus_mask */
 #define PF_MCE_EARLY		0x08000000      /* Early kill for mce process policy */
 #define PF_MUTEX_TESTER		0x20000000	/* Thread belongs to the rt mutex tester */
 #define PF_FREEZER_SKIP		0x40000000	/* Freezer should not count it as freezable */
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index 0f41292be0fb..5bb6d48cfece 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -2092,7 +2092,7 @@ static void cpuset_fork(struct task_struct *task)
 	if (task_css_is_root(task, cpuset_cgrp_id))
 		return;
 
-	set_cpus_allowed_ptr(task, &current->cpus_allowed);
+	set_cpus_allowed_ptr(task, current->cpus_ptr);
 	task->mems_allowed = current->mems_allowed;
 }
 
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 3b31fc05a0f1..96481b3ea746 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -986,7 +986,7 @@ static struct rq *__migrate_task(struct rq *rq, struct task_struct *p, int dest_
 		return rq;
 
 	/* Affinity changed (again). */
-	if (!cpumask_test_cpu(dest_cpu, &p->cpus_allowed))
+	if (!cpumask_test_cpu(dest_cpu, p->cpus_ptr))
 		return rq;
 
 	rq = move_queued_task(rq, p, dest_cpu);
@@ -1012,7 +1012,7 @@ static int migration_cpu_stop(void *data)
 	local_irq_disable();
 	/*
 	 * We need to explicitly wake pending tasks before running
-	 * __migrate_task() such that we will not miss enforcing cpus_allowed
+	 * __migrate_task() such that we will not miss enforcing cpus_ptr
 	 * during wakeups, see set_cpus_allowed_ptr()'s TASK_WAKING test.
 	 */
 	sched_ttwu_pending();
@@ -1043,7 +1043,7 @@ static int migration_cpu_stop(void *data)
  */
 void set_cpus_allowed_common(struct task_struct *p, const struct cpumask *new_mask)
 {
-	cpumask_copy(&p->cpus_allowed, new_mask);
+	cpumask_copy(&p->cpus_mask, new_mask);
 	p->nr_cpus_allowed = cpumask_weight(new_mask);
 }
 
@@ -1113,7 +1113,7 @@ static int __set_cpus_allowed_ptr(struct task_struct *p,
 		goto out;
 	}
 
-	if (cpumask_equal(&p->cpus_allowed, new_mask))
+	if (cpumask_equal(p->cpus_ptr, new_mask))
 		goto out;
 
 	if (!cpumask_intersects(new_mask, cpu_valid_mask)) {
@@ -1264,10 +1264,10 @@ static int migrate_swap_stop(void *data)
 	if (task_cpu(arg->src_task) != arg->src_cpu)
 		goto unlock;
 
-	if (!cpumask_test_cpu(arg->dst_cpu, &arg->src_task->cpus_allowed))
+	if (!cpumask_test_cpu(arg->dst_cpu, arg->src_task->cpus_ptr))
 		goto unlock;
 
-	if (!cpumask_test_cpu(arg->src_cpu, &arg->dst_task->cpus_allowed))
+	if (!cpumask_test_cpu(arg->src_cpu, arg->dst_task->cpus_ptr))
 		goto unlock;
 
 	__migrate_swap_task(arg->src_task, arg->dst_cpu);
@@ -1308,10 +1308,10 @@ int migrate_swap(struct task_struct *cur, struct task_struct *p)
 	if (!cpu_active(arg.src_cpu) || !cpu_active(arg.dst_cpu))
 		goto out;
 
-	if (!cpumask_test_cpu(arg.dst_cpu, &arg.src_task->cpus_allowed))
+	if (!cpumask_test_cpu(arg.dst_cpu, arg.src_task->cpus_ptr))
 		goto out;
 
-	if (!cpumask_test_cpu(arg.src_cpu, &arg.dst_task->cpus_allowed))
+	if (!cpumask_test_cpu(arg.src_cpu, arg.dst_task->cpus_ptr))
 		goto out;
 
 	trace_sched_swap_numa(cur, arg.src_cpu, p, arg.dst_cpu);
@@ -1455,7 +1455,7 @@ void kick_process(struct task_struct *p)
 EXPORT_SYMBOL_GPL(kick_process);
 
 /*
- * ->cpus_allowed is protected by both rq->lock and p->pi_lock
+ * ->cpus_ptr is protected by both rq->lock and p->pi_lock
  *
  * A few notes on cpu_active vs cpu_online:
  *
@@ -1495,14 +1495,14 @@ static int select_fallback_rq(int cpu, struct task_struct *p)
 		for_each_cpu(dest_cpu, nodemask) {
 			if (!cpu_active(dest_cpu))
 				continue;
-			if (cpumask_test_cpu(dest_cpu, &p->cpus_allowed))
+			if (cpumask_test_cpu(dest_cpu, p->cpus_ptr))
 				return dest_cpu;
 		}
 	}
 
 	for (;;) {
 		/* Any allowed, online CPU? */
-		for_each_cpu(dest_cpu, &p->cpus_allowed) {
+		for_each_cpu(dest_cpu, p->cpus_ptr) {
 			if (!(p->flags & PF_KTHREAD) && !cpu_active(dest_cpu))
 				continue;
 			if (!cpu_online(dest_cpu))
@@ -1547,7 +1547,7 @@ static int select_fallback_rq(int cpu, struct task_struct *p)
 }
 
 /*
- * The caller (fork, wakeup) owns p->pi_lock, ->cpus_allowed is stable.
+ * The caller (fork, wakeup) owns p->pi_lock, ->cpus_ptr is stable.
  */
 static inline
 int select_task_rq(struct task_struct *p, int cpu, int sd_flags, int wake_flags)
@@ -1557,11 +1557,11 @@ int select_task_rq(struct task_struct *p, int cpu, int sd_flags, int wake_flags)
 	if (p->nr_cpus_allowed > 1)
 		cpu = p->sched_class->select_task_rq(p, cpu, sd_flags, wake_flags);
 	else
-		cpu = cpumask_any(&p->cpus_allowed);
+		cpu = cpumask_any(p->cpus_ptr);
 
 	/*
 	 * In order not to call set_task_cpu() on a blocking task we need
-	 * to rely on ttwu() to place the task on a valid ->cpus_allowed
+	 * to rely on ttwu() to place the task on a valid ->cpus_ptr
 	 * CPU.
 	 *
 	 * Since this is common to all placement strategies, this lives here.
@@ -1569,7 +1569,7 @@ int select_task_rq(struct task_struct *p, int cpu, int sd_flags, int wake_flags)
 	 * [ this allows ->select_task() to simply return task_cpu(p) and
 	 *   not worry about this generic constraint ]
 	 */
-	if (unlikely(!cpumask_test_cpu(cpu, &p->cpus_allowed) ||
+	if (unlikely(!cpumask_test_cpu(cpu, p->cpus_ptr) ||
 		     !cpu_online(cpu)))
 		cpu = select_fallback_rq(task_cpu(p), p);
 
@@ -2543,7 +2543,7 @@ void wake_up_new_task(struct task_struct *p)
 #ifdef CONFIG_SMP
 	/*
 	 * Fork balancing, do it here and not earlier because:
-	 *  - cpus_allowed can change in the fork path
+	 *  - cpus_ptr can change in the fork path
 	 *  - any previously selected CPU might disappear through hotplug
 	 *
 	 * Use __set_task_cpu() to avoid calling sched_class::migrate_task_rq,
@@ -4273,7 +4273,7 @@ static int __sched_setscheduler(struct task_struct *p,
 			 * the entire root_domain to become SCHED_DEADLINE. We
 			 * will also fail if there's no bandwidth available.
 			 */
-			if (!cpumask_subset(span, &p->cpus_allowed) ||
+			if (!cpumask_subset(span, p->cpus_ptr) ||
 			    rq->rd->dl_bw.bw == 0) {
 				task_rq_unlock(rq, p, &rf);
 				return -EPERM;
@@ -4867,7 +4867,7 @@ long sched_getaffinity(pid_t pid, struct cpumask *mask)
 		goto out_unlock;
 
 	raw_spin_lock_irqsave(&p->pi_lock, flags);
-	cpumask_and(mask, &p->cpus_allowed, cpu_active_mask);
+	cpumask_and(mask, &p->cpus_mask, cpu_active_mask);
 	raw_spin_unlock_irqrestore(&p->pi_lock, flags);
 
 out_unlock:
@@ -5427,7 +5427,7 @@ int task_can_attach(struct task_struct *p,
 	 * allowed nodes is unnecessary.  Thus, cpusets are not
 	 * applicable for such threads.  This prevents checking for
 	 * success of set_cpus_allowed_ptr() on all attached tasks
-	 * before cpus_allowed may be changed.
+	 * before cpus_mask may be changed.
 	 */
 	if (p->flags & PF_NO_SETAFFINITY) {
 		ret = -EINVAL;
@@ -5483,7 +5483,7 @@ int migrate_task_to(struct task_struct *p, int target_cpu)
 	if (curr_cpu == target_cpu)
 		return 0;
 
-	if (!cpumask_test_cpu(target_cpu, &p->cpus_allowed))
+	if (!cpumask_test_cpu(target_cpu, p->cpus_ptr))
 		return -EINVAL;
 
 	/* TODO: This is not properly updating schedstats */
@@ -5623,7 +5623,7 @@ static void migrate_tasks(struct rq *dead_rq)
 		next->sched_class->put_prev_task(rq, next);
 
 		/*
-		 * Rules for changing task_struct::cpus_allowed are holding
+		 * Rules for changing task_struct::cpus_mask are holding
 		 * both pi_lock and rq->lock, such that holding either
 		 * stabilizes the mask.
 		 *
diff --git a/kernel/sched/cpudeadline.c b/kernel/sched/cpudeadline.c
index fba235c7d026..165dd5078e85 100644
--- a/kernel/sched/cpudeadline.c
+++ b/kernel/sched/cpudeadline.c
@@ -128,10 +128,10 @@ int cpudl_find(struct cpudl *cp, struct task_struct *p,
 	const struct sched_dl_entity *dl_se = &p->dl;
 
 	if (later_mask &&
-	    cpumask_and(later_mask, cp->free_cpus, &p->cpus_allowed)) {
+	    cpumask_and(later_mask, cp->free_cpus, p->cpus_ptr)) {
 		best_cpu = cpumask_any(later_mask);
 		goto out;
-	} else if (cpumask_test_cpu(cpudl_maximum(cp), &p->cpus_allowed) &&
+	} else if (cpumask_test_cpu(cpudl_maximum(cp), p->cpus_ptr) &&
 			dl_time_before(dl_se->deadline, cp->elements[0].dl)) {
 		best_cpu = cpudl_maximum(cp);
 		if (later_mask)
diff --git a/kernel/sched/cpupri.c b/kernel/sched/cpupri.c
index 981fcd7dc394..d84aae9b694c 100644
--- a/kernel/sched/cpupri.c
+++ b/kernel/sched/cpupri.c
@@ -103,11 +103,11 @@ int cpupri_find(struct cpupri *cp, struct task_struct *p,
 		if (skip)
 			continue;
 
-		if (cpumask_any_and(&p->cpus_allowed, vec->mask) >= nr_cpu_ids)
+		if (cpumask_any_and(p->cpus_ptr, vec->mask) >= nr_cpu_ids)
 			continue;
 
 		if (lowest_mask) {
-			cpumask_and(lowest_mask, &p->cpus_allowed, vec->mask);
+			cpumask_and(lowest_mask, p->cpus_ptr, vec->mask);
 
 			/*
 			 * We have to ensure that we have at least one bit
diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index a2ce59015642..ce9233cd1126 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -252,7 +252,7 @@ static struct rq *dl_task_offline_migration(struct rq *rq, struct task_struct *p
 		 * If we cannot preempt any rq, fall back to pick any
 		 * online cpu.
 		 */
-		cpu = cpumask_any_and(cpu_active_mask, &p->cpus_allowed);
+		cpu = cpumask_any_and(cpu_active_mask, p->cpus_ptr);
 		if (cpu >= nr_cpu_ids) {
 			/*
 			 * Fail to find any suitable cpu.
@@ -1286,7 +1286,7 @@ static void set_curr_task_dl(struct rq *rq)
 static int pick_dl_task(struct rq *rq, struct task_struct *p, int cpu)
 {
 	if (!task_running(rq, p) &&
-	    cpumask_test_cpu(cpu, &p->cpus_allowed))
+	    cpumask_test_cpu(cpu, p->cpus_ptr))
 		return 1;
 	return 0;
 }
@@ -1435,7 +1435,7 @@ static struct rq *find_lock_later_rq(struct task_struct *task, struct rq *rq)
 		/* Retry if something changed. */
 		if (double_lock_balance(rq, later_rq)) {
 			if (unlikely(task_rq(task) != rq ||
-				     !cpumask_test_cpu(later_rq->cpu, &task->cpus_allowed) ||
+				     !cpumask_test_cpu(later_rq->cpu, task->cpus_ptr) ||
 				     task_running(rq, task) ||
 				     !dl_task(task) ||
 				     !task_on_rq_queued(task))) {
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index dea138964b91..e136330f861f 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -1553,7 +1553,7 @@ static void task_numa_compare(struct task_numa_env *env,
 	 */
 	if (cur) {
 		/* Skip this swap candidate if cannot move to the source cpu */
-		if (!cpumask_test_cpu(env->src_cpu, &cur->cpus_allowed))
+		if (!cpumask_test_cpu(env->src_cpu, cur->cpus_ptr))
 			goto unlock;
 
 		/*
@@ -1663,7 +1663,7 @@ static void task_numa_find_cpu(struct task_numa_env *env,
 
 	for_each_cpu(cpu, cpumask_of_node(env->dst_nid)) {
 		/* Skip this CPU if the source task cannot migrate */
-		if (!cpumask_test_cpu(cpu, &env->p->cpus_allowed))
+		if (!cpumask_test_cpu(cpu, env->p->cpus_ptr))
 			continue;
 
 		env->dst_cpu = cpu;
@@ -5460,7 +5460,7 @@ find_idlest_group(struct sched_domain *sd, struct task_struct *p,
 
 		/* Skip over this group if it has no CPUs allowed */
 		if (!cpumask_intersects(sched_group_cpus(group),
-					&p->cpus_allowed))
+					p->cpus_ptr))
 			continue;
 
 		local_group = cpumask_test_cpu(this_cpu,
@@ -5580,7 +5580,7 @@ find_idlest_cpu(struct sched_group *group, struct task_struct *p, int this_cpu)
 		return cpumask_first(sched_group_cpus(group));
 
 	/* Traverse only the allowed CPUs */
-	for_each_cpu_and(i, sched_group_cpus(group), &p->cpus_allowed) {
+	for_each_cpu_and(i, sched_group_cpus(group), p->cpus_ptr) {
 		if (idle_cpu(i)) {
 			struct rq *rq = cpu_rq(i);
 			struct cpuidle_state *idle = idle_get_state(rq);
@@ -5719,7 +5719,7 @@ static int select_idle_core(struct task_struct *p, struct sched_domain *sd, int
 	if (!test_idle_cores(target, false))
 		return -1;
 
-	cpumask_and(cpus, sched_domain_span(sd), &p->cpus_allowed);
+	cpumask_and(cpus, sched_domain_span(sd), p->cpus_ptr);
 
 	for_each_cpu_wrap(core, cpus, target, wrap) {
 		bool idle = true;
@@ -5753,7 +5753,7 @@ static int select_idle_smt(struct task_struct *p, struct sched_domain *sd, int t
 		return -1;
 
 	for_each_cpu(cpu, cpu_smt_mask(target)) {
-		if (!cpumask_test_cpu(cpu, &p->cpus_allowed))
+		if (!cpumask_test_cpu(cpu, p->cpus_ptr))
 			continue;
 		if (idle_cpu(cpu))
 			return cpu;
@@ -5805,7 +5805,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t
 	time = local_clock();
 
 	for_each_cpu_wrap(cpu, sched_domain_span(sd), target, wrap) {
-		if (!cpumask_test_cpu(cpu, &p->cpus_allowed))
+		if (!cpumask_test_cpu(cpu, p->cpus_ptr))
 			continue;
 		if (idle_cpu(cpu))
 			break;
@@ -5960,7 +5960,7 @@ select_task_rq_fair(struct task_struct *p, int prev_cpu, int sd_flag, int wake_f
 	if (sd_flag & SD_BALANCE_WAKE) {
 		record_wakee(p);
 		want_affine = !wake_wide(p) && !wake_cap(p, cpu, prev_cpu)
-			      && cpumask_test_cpu(cpu, &p->cpus_allowed);
+			      && cpumask_test_cpu(cpu, p->cpus_ptr);
 	}
 
 	rcu_read_lock();
@@ -6693,14 +6693,14 @@ int can_migrate_task(struct task_struct *p, struct lb_env *env)
 	/*
 	 * We do not migrate tasks that are:
 	 * 1) throttled_lb_pair, or
-	 * 2) cannot be migrated to this CPU due to cpus_allowed, or
+	 * 2) cannot be migrated to this CPU due to cpus_ptr, or
 	 * 3) running (obviously), or
 	 * 4) are cache-hot on their current CPU.
 	 */
 	if (throttled_lb_pair(task_group(p), env->src_cpu, env->dst_cpu))
 		return 0;
 
-	if (!cpumask_test_cpu(env->dst_cpu, &p->cpus_allowed)) {
+	if (!cpumask_test_cpu(env->dst_cpu, p->cpus_ptr)) {
 		int cpu;
 
 		schedstat_inc(p->se.statistics.nr_failed_migrations_affine);
@@ -6720,7 +6720,7 @@ int can_migrate_task(struct task_struct *p, struct lb_env *env)
 
 		/* Prevent to re-select dst_cpu via env's cpus */
 		for_each_cpu_and(cpu, env->dst_grpmask, env->cpus) {
-			if (cpumask_test_cpu(cpu, &p->cpus_allowed)) {
+			if (cpumask_test_cpu(cpu, p->cpus_ptr)) {
 				env->flags |= LBF_DST_PINNED;
 				env->new_dst_cpu = cpu;
 				break;
@@ -7254,7 +7254,7 @@ check_cpu_capacity(struct rq *rq, struct sched_domain *sd)
 
 /*
  * Group imbalance indicates (and tries to solve) the problem where balancing
- * groups is inadequate due to ->cpus_allowed constraints.
+ * groups is inadequate due to ->cpus_ptr constraints.
  *
  * Imagine a situation of two groups of 4 cpus each and 4 tasks each with a
  * cpumask covering 1 cpu of the first group and 3 cpus of the second group.
@@ -7828,7 +7828,7 @@ static struct sched_group *find_busiest_group(struct lb_env *env)
 	/*
 	 * If the busiest group is imbalanced the below checks don't
 	 * work because they assume all things are equal, which typically
-	 * isn't true due to cpus_allowed constraints and the like.
+	 * isn't true due to cpus_ptr constraints and the like.
 	 */
 	if (busiest->group_type == group_imbalanced)
 		goto force_balance;
@@ -8213,7 +8213,7 @@ static int load_balance(int this_cpu, struct rq *this_rq,
 			 * if the curr task on busiest cpu can't be
 			 * moved to this_cpu
 			 */
-			if (!cpumask_test_cpu(this_cpu, &busiest->curr->cpus_allowed)) {
+			if (!cpumask_test_cpu(this_cpu, busiest->curr->cpus_ptr)) {
 				raw_spin_unlock_irqrestore(&busiest->lock,
 							    flags);
 				env.flags |= LBF_ALL_PINNED;
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 9f3e40226dec..872eba9f2174 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -1591,7 +1591,7 @@ static void put_prev_task_rt(struct rq *rq, struct task_struct *p)
 static int pick_rt_task(struct rq *rq, struct task_struct *p, int cpu)
 {
 	if (!task_running(rq, p) &&
-	    cpumask_test_cpu(cpu, &p->cpus_allowed))
+	    cpumask_test_cpu(cpu, p->cpus_ptr))
 		return 1;
 	return 0;
 }
@@ -1726,7 +1726,7 @@ static struct rq *find_lock_lowest_rq(struct task_struct *task, struct rq *rq)
 			 * Also make sure that it wasn't scheduled on its rq.
 			 */
 			if (unlikely(task_rq(task) != rq ||
-				     !cpumask_test_cpu(lowest_rq->cpu, &task->cpus_allowed) ||
+				     !cpumask_test_cpu(lowest_rq->cpu, task->cpus_ptr) ||
 				     task_running(rq, task) ||
 				     !rt_task(task) ||
 				     !task_on_rq_queued(task))) {
diff --git a/kernel/trace/trace_hwlat.c b/kernel/trace/trace_hwlat.c
index 21ea6ae77d93..0cdf70878312 100644
--- a/kernel/trace/trace_hwlat.c
+++ b/kernel/trace/trace_hwlat.c
@@ -279,7 +279,7 @@ static void move_to_next_cpu(void)
 	 * of this thread, than stop migrating for the duration
 	 * of the current test.
 	 */
-	if (!cpumask_equal(current_mask, &current->cpus_allowed))
+	if (!cpumask_equal(current_mask, current->cpus_ptr))
 		goto disable;
 
 	get_online_cpus();
diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c
index 690d75b132fa..8779ffe90b76 100644
--- a/lib/smp_processor_id.c
+++ b/lib/smp_processor_id.c
@@ -22,7 +22,7 @@ notrace static unsigned int check_preemption_disabled(const char *what1,
 	 * Kernel threads bound to a single CPU can safely use
 	 * smp_processor_id():
 	 */
-	if (cpumask_equal(&current->cpus_allowed, cpumask_of(this_cpu)))
+	if (cpumask_equal(current->cpus_ptr, cpumask_of(this_cpu)))
 		goto out;
 
 	/*
diff --git a/samples/trace_events/trace-events-sample.c b/samples/trace_events/trace-events-sample.c
index bc7fcf010a5b..9abbefb3617c 100644
--- a/samples/trace_events/trace-events-sample.c
+++ b/samples/trace_events/trace-events-sample.c
@@ -33,7 +33,7 @@ static void simple_thread_func(int cnt)
 
 	/* Silly tracepoints */
 	trace_foo_bar("hello", cnt, array, random_strings[len],
-		      &current->cpus_allowed);
+		      current->cpus_ptr);
 
 	trace_foo_with_template_simple("HELLO", cnt);
 
-- 
2.11.0

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Ingo Molnar]

* Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:

> In commit 4b53a3412d66 ("sched/core: Remove the tsk_nr_cpus_allowed()
> wrapper") the tsk_nr_cpus_allowed() wrapper was removed. There was not
> much difference in !RT but in RT we used this to implement
> migrate_disable(). Within a migrate_disable() section the CPU mask is
> restricted to single CPU while the "normal" CPU mask remains untouched.
> 
> As an alternative implementation Ingo suggested to use
> 	struct task_struct {
> 		const cpumask_t		*cpus_ptr;
> 		cpumask_t		cpus_mask;
>         };
> with
> 	t->cpus_allowed_ptr = &t->cpus_allowed;
> 
> In -RT we then can switch the cpus_ptr to
> 	t->cpus_allowed_ptr = &cpumask_of(task_cpu(p));
> 
> in a migration disabled region. The rules are simple:
> - Code that 'uses' ->cpus_allowed would use the pointer.
> - Code that 'modifies' ->cpus_allowed would use the direct mask.
> 
> While converting the existing users I tried to stick with the rules
> above however… well mostly CPUFREQ tries to temporary switch the CPU
> mask to do something on a certain CPU and then switches the mask back it
> its original value. So in theory `cpus_ptr' could or should be used.
> However if this is invoked in a migration disabled region (which is not
> the case because it would require something like preempt_disable() and
> set_cpus_allowed_ptr() might sleep so it can't be) then the "restore"
> part would restore the wrong mask. So it only looks strange and I go for
> the pointer…

So maybe we could add the following facility:

	ptr = sched_migrate_to_cpu_save(cpu);

	...

	sched_migrate_to_cpu_restore(ptr);

... and use it in the cpufreq code. Then -rt could simply define migrate_disable() 
to be:

	ptr = sched_migrate_to_cpu_save(raw_smp_processor_id());

and define migrate_enable() as:

	sched_migrate_to_cpu_restore(ptr);

... or such.

In the cpu == current_cpu case it would be super fast - otherwise it would migrate 
over to the target CPU first. Also note that this facility is strictly a special 
case for single-CPU masks and migrations - i.e. the constant pointer cpumask 
optimization would always apply.

Note that due to the use of the 'ptr' local variable the interface nests 
naturally, so this would be a legitimate use:
	
	ptr = sched_migrate_to_cpu_save(cpu);

	...
		migrate_disable();
		...
		migrate_enable();
	...

	sched_migrate_to_cpu_restore(ptr);

I.e. my proposal would be to essentially upstream the -rt migrate_disable() 
facility in a slightly more generic form that would fit the cpufreq usecase.

I bet a number of the current driver's mucking with cpumask would also fit this 
new API.

Does this make sense?

Thanks,

	Ingo

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Sebastian Andrzej Siewior]

On 2017-04-05 09:39:43 [+0200], Ingo Molnar wrote:
> 
> So maybe we could add the following facility:
> 
> 	ptr = sched_migrate_to_cpu_save(cpu);
> 
> 	...
> 
> 	sched_migrate_to_cpu_restore(ptr);
> 
> ... and use it in the cpufreq code. Then -rt could simply define migrate_disable() 
> to be:
> 
> 	ptr = sched_migrate_to_cpu_save(raw_smp_processor_id());
> 
> and define migrate_enable() as:
> 
> 	sched_migrate_to_cpu_restore(ptr);
> 
> ... or such.
> 
> In the cpu == current_cpu case it would be super fast - otherwise it would migrate 
> over to the target CPU first. Also note that this facility is strictly a special 
> case for single-CPU masks and migrations - i.e. the constant pointer cpumask 
> optimization would always apply.
> 
> Note that due to the use of the 'ptr' local variable the interface nests 
> naturally, so this would be a legitimate use:
> 	
> 	ptr = sched_migrate_to_cpu_save(cpu);
> 
> 	...
> 		migrate_disable();
> 		...
> 		migrate_enable();
> 	...
> 
> 	sched_migrate_to_cpu_restore(ptr);
> 
> I.e. my proposal would be to essentially upstream the -rt migrate_disable() 
> facility in a slightly more generic form that would fit the cpufreq usecase.
> 
> I bet a number of the current driver's mucking with cpumask would also fit this 
> new API.
> 
> Does this make sense?

It kind of does. If you want to allow migration to different CPU then it
will might make things little complicated because we need to supported
nested migrate_disable() and we can't (must not) change the mask while
nesting.
Other than that, I am not sure the cpufreq usecase is valid.
schedule_work_on() looks better but maybe not as fast as the proposed
sched_migrate_to_cpu_save(). Also, some users look wrong:
	[PATCH] CPUFREQ: Loongson2: drop set_cpus_allowed_ptr()
	https://www.linux-mips.org/archives/linux-mips/2017-04/msg00042.html

and I received offlist mail pointing to the other cpufreq users. So here
I am waiting for some feedback from the cpufreq maintainer.

But I get your point. Other than super-fast switching to a specific CPU
for $reason we could replace a few preempt_disable() invocation which
are only there due to per-CPU variables. So let me hack this into -RT
and come back…

> Thanks,
> 
> 	Ingo

Sebastian

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Ingo Molnar]

* Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:

> On 2017-04-05 09:39:43 [+0200], Ingo Molnar wrote:
> > 
> > So maybe we could add the following facility:
> > 
> > 	ptr = sched_migrate_to_cpu_save(cpu);
> > 
> > 	...
> > 
> > 	sched_migrate_to_cpu_restore(ptr);

BTW., and I'm sure this has come up before, but why doesn't migrate_disable() use 
a simple per task flag that the scheduler migration code takes into account?

It should be functionally equivalent to the current solution, and it appears to 
have a heck of a smaller cross section with the rest of the scheduler.

I.e.:

	static inline void migrate_disable(void)
	{
		current->migration_disabled++;
	}

	...

	static inline void migrate_enable(void)
	{
		current->migration_disabled--;
	}

or so? Then add this flag as a condition to can_migrate_task() et al.

While we generally dislike such flags as they wreck havoc with the scheduler if 
overused, the cpus_allowed based solution has the exact same effect so it's not 
like it's a step backwards - and it should also be much faster and less intrusive.

Am I missing some complication?

Thanks,

	Ingo

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Sebastian Andrzej Siewior]

On 2017-04-06 08:16:22 [+0200], Ingo Molnar wrote:
> 
> * Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:
> 
> > On 2017-04-05 09:39:43 [+0200], Ingo Molnar wrote:
> > > 
> > > So maybe we could add the following facility:
> > > 
> > > 	ptr = sched_migrate_to_cpu_save(cpu);
> > > 
> > > 	...
> > > 
> > > 	sched_migrate_to_cpu_restore(ptr);
> 
> BTW., and I'm sure this has come up before, but why doesn't migrate_disable() use 
> a simple per task flag that the scheduler migration code takes into account?

we could add that. But right now there are two spots which look at the
counter to decide whether or not migration is disabled.

> It should be functionally equivalent to the current solution, and it appears to 
> have a heck of a smaller cross section with the rest of the scheduler.
> 
> I.e.:
> 
> 	static inline void migrate_disable(void)
> 	{
> 		current->migration_disabled++;
> 	}
> 
> 	...
> 
> 	static inline void migrate_enable(void)
> 	{
> 		current->migration_disabled--;
> 	}
> 
> or so? Then add this flag as a condition to can_migrate_task() et al.
> 
> While we generally dislike such flags as they wreck havoc with the scheduler if 
> overused, the cpus_allowed based solution has the exact same effect so it's not 
> like it's a step backwards - and it should also be much faster and less intrusive.

So you are saying that we drop the cpus_ptr + cpus_mask fields again and
instead add a task-flag to ensure that the scheduler does not migrate
the task to another CPU?

> Am I missing some complication?

We do have the counter. We have need to ensure that the CPU is not going
away while we are in a migrate_disable() region since we can be
scheduled out. So the CPU can't go offline until we leave that region.
This version uses get_online_cpus() while in -RT we have something
called "pin_current_cpu()". This is a lightweight version of
get_online_cpus() which should go away…
Right now I have this and I need to test this and complete CPU hop part:

#define migrate_disable()	sched_migrate_to_cpu_save(-1)

int sched_migrate_to_cpu_save(int cpu)
{
       struct task_struct *p = current;

       if (in_atomic()) {
#ifdef CONFIG_SCHED_DEBUG
               p->migrate_disable_atomic++;
               if (cpu >= 0)
                       WARN_ON_ONCE(!cpumask_equal(p->cpus_ptr, cpumask_of(cpu)));
#endif
               return raw_smp_processor_id();
       }
#ifdef CONFIG_SCHED_DEBUG
       WARN_ON_ONCE(p->migrate_disable_atomic);
#endif

       if (p->migrate_disable) {
               p->migrate_disable++;
#ifdef CONFIG_SCHED_DEBUG
               if (cpu >= 0)
                       WARN_ON_ONCE(!cpumask_equal(p->cpus_ptr, cpumask_of(cpu)));
#endif
               return raw_smp_processor_id();
       }

       get_online_cpus();

       preempt_disable();
       p->migrate_disable = 1;

       if (cpu < 0) {
               p->cpus_ptr = &cpumask_of(task_cpu(raw_smp_processor_id()));
       } else {
               if (!cpu_online(cpu)) {
                       preempt_enable();
                       put_online_cpus();
                       WARN(1, "CPU is offline\n");
                       return -ENODEV;
               }
               p->cpus_ptr = &cpumask_of(task_cpu((cpu)));
       }
       t->nr_cpus = 1;
       preempt_enable();

       if (cpumask_equal(p->cpus_ptr, cpumask_of(cpu)))
               return cpu;

       /* move to the correct CPU */
       BUG();
       return raw_smp_processor_id();
}

The task-flag / p->migrate_disable() counter is used in two spots in
       do_set_cpus_allowed();
       __set_cpus_allowed_ptr();

so that a change to the affinity mask does not force a CPU hop.

> Thanks,
> 
> 	Ingo

Sebastian

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Ingo Molnar]

* Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:

> On 2017-04-06 08:16:22 [+0200], Ingo Molnar wrote:
> > 
> > * Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:
> > 
> > > On 2017-04-05 09:39:43 [+0200], Ingo Molnar wrote:
> > > > 
> > > > So maybe we could add the following facility:
> > > > 
> > > > 	ptr = sched_migrate_to_cpu_save(cpu);
> > > > 
> > > > 	...
> > > > 
> > > > 	sched_migrate_to_cpu_restore(ptr);
> > 
> > BTW., and I'm sure this has come up before, but why doesn't migrate_disable() use 
> > a simple per task flag that the scheduler migration code takes into account?
> 
> we could add that. But right now there are two spots which look at the
> counter to decide whether or not migration is disabled.
> 
> > It should be functionally equivalent to the current solution, and it appears to 
> > have a heck of a smaller cross section with the rest of the scheduler.
> > 
> > I.e.:
> > 
> > 	static inline void migrate_disable(void)
> > 	{
> > 		current->migration_disabled++;
> > 	}
> > 
> > 	...
> > 
> > 	static inline void migrate_enable(void)
> > 	{
> > 		current->migration_disabled--;
> > 	}
> > 
> > or so? Then add this flag as a condition to can_migrate_task() et al.
> > 
> > While we generally dislike such flags as they wreck havoc with the scheduler if 
> > overused, the cpus_allowed based solution has the exact same effect so it's not 
> > like it's a step backwards - and it should also be much faster and less intrusive.
> 
> So you are saying that we drop the cpus_ptr + cpus_mask fields again and
> instead add a task-flag to ensure that the scheduler does not migrate
> the task to another CPU?

Yeah - but no need to add a per-task flag if we already have a counter.

> > Am I missing some complication?
> 
> We do have the counter. We have need to ensure that the CPU is not going away 
> while we are in a migrate_disable() region since we can be scheduled out. So the 
> CPU can't go offline until we leave that region.

Yeah. But it should be relatively straightforward to extend the logic that makes 
sure that a CPU does not go away from under tasks pinned to that CPU alone, right?

> #define migrate_disable()	sched_migrate_to_cpu_save(-1)
> 
> int sched_migrate_to_cpu_save(int cpu)

So if we have a ->migration_disabled counter then we don't need the 
sched_migrate_to_cpu_save()/restore() complication, right?

Sorry if this is a back and forth - I was somehow convinced that we do need to 
frob the cpus_allowed mask to get this functionality - but in hindsight I think 
the counter should be enough.

I.e. just have a counter and these two APIs:

        static inline void migrate_disable(void)
        {
                current->migration_disabled++;
        }

        ...

        static inline void migrate_enable(void)
        {
                current->migration_disabled--;
        }

... and make sure the scheduler migration code plus the CPU hotplug code considers 
the counter.

Would this work, and would this be the simplest all around solution?

Thanks,

	Ingo

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Sebastian Andrzej Siewior]

On 2017-04-06 10:01:39 [+0200], Ingo Molnar wrote:
> 
> * Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:
> 
> > On 2017-04-06 08:16:22 [+0200], Ingo Molnar wrote:
> > > 
> > > * Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:
> > > 
> > > > On 2017-04-05 09:39:43 [+0200], Ingo Molnar wrote:
> > > > > 
> > > > > So maybe we could add the following facility:
> > > > > 
> > > > > 	ptr = sched_migrate_to_cpu_save(cpu);
> > > > > 
> > > > > 	...
> > > > > 
> > > > > 	sched_migrate_to_cpu_restore(ptr);
> > > 
> > > BTW., and I'm sure this has come up before, but why doesn't migrate_disable() use 
> > > a simple per task flag that the scheduler migration code takes into account?
> > 
> > we could add that. But right now there are two spots which look at the
> > counter to decide whether or not migration is disabled.
> > 
> > > It should be functionally equivalent to the current solution, and it appears to 
> > > have a heck of a smaller cross section with the rest of the scheduler.
> > > 
> > > I.e.:
> > > 
> > > 	static inline void migrate_disable(void)
> > > 	{
> > > 		current->migration_disabled++;
> > > 	}
> > > 
> > > 	...
> > > 
> > > 	static inline void migrate_enable(void)
> > > 	{
> > > 		current->migration_disabled--;
> > > 	}
> > > 
> > > or so? Then add this flag as a condition to can_migrate_task() et al.
> > > 
> > > While we generally dislike such flags as they wreck havoc with the scheduler if 
> > > overused, the cpus_allowed based solution has the exact same effect so it's not 
> > > like it's a step backwards - and it should also be much faster and less intrusive.
> > 
> > So you are saying that we drop the cpus_ptr + cpus_mask fields again and
> > instead add a task-flag to ensure that the scheduler does not migrate
> > the task to another CPU?
> 
> Yeah - but no need to add a per-task flag if we already have a counter.
> 
> > > Am I missing some complication?
> > 
> > We do have the counter. We have need to ensure that the CPU is not going away 
> > while we are in a migrate_disable() region since we can be scheduled out. So the 
> > CPU can't go offline until we leave that region.
> 
> Yeah. But it should be relatively straightforward to extend the logic that makes 
> sure that a CPU does not go away from under tasks pinned to that CPU alone, right?

I used get_online_cpus() that is enough.

> > #define migrate_disable()	sched_migrate_to_cpu_save(-1)
> > 
> > int sched_migrate_to_cpu_save(int cpu)
> 
> So if we have a ->migration_disabled counter then we don't need the 
> sched_migrate_to_cpu_save()/restore() complication, right?

correct. Unless (as you suggested) we want a migrate to specific CPU we
just the function until the BUG() statement and don't need to check the
CPU we are on.

> Sorry if this is a back and forth - I was somehow convinced that we do need to 
> frob the cpus_allowed mask to get this functionality - but in hindsight I think 
> the counter should be enough.
> 
> I.e. just have a counter and these two APIs:
> 
>         static inline void migrate_disable(void)
>         {
>                 current->migration_disabled++;
plus
	if (current->migration_disabled == 1)
		get_online_cpus()
>         }
> 
>         ...
> 
>         static inline void migrate_enable(void)
>         {
>                 current->migration_disabled--;
>         }
> 
> ... and make sure the scheduler migration code plus the CPU hotplug code considers 
> the counter.

So on the sched part I need go through all places where it looks at the
mask and make sure it ignores the CPU switch decision. This could be
doable.
On the CPU hotplug I don't see a way around get_online_cpus(). It is
essentially there to ensure a CPU does not go away. The other way around
it would be to remove the CPU from the online_mask followed by going
through all task left on the CPU waiting for them leave the CPU. And I
remember peterz saying that he wanted to make get_online_cpus() fast and
stay with that.

> Would this work, and would this be the simplest all around solution?

Let me try this with get_online_cpus() (as suggested) and without
cpus_ptr.

> Thanks,
> 
> 	Ingo

Sebastian

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Tue, Apr 04, 2017 at 08:42:02PM +0200, Sebastian Andrzej Siewior wrote:
> While converting the existing users I tried to stick with the rules
> above however… well mostly CPUFREQ tries to temporary switch the CPU
> mask to do something on a certain CPU and then switches the mask back it
> its original value.


There's a bunch of that through ancient and rotten parts of the kernel.
All those sites are broken.

Nothing stops userspace from setting a different affinity right after
the kernel does for those threads.

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Wed, Apr 05, 2017 at 09:39:43AM +0200, Ingo Molnar wrote:

> > While converting the existing users I tried to stick with the rules
> > above however… well mostly CPUFREQ tries to temporary switch the CPU
> > mask to do something on a certain CPU and then switches the mask back it
> > its original value. So in theory `cpus_ptr' could or should be used.
> > However if this is invoked in a migration disabled region (which is not
> > the case because it would require something like preempt_disable() and
> > set_cpus_allowed_ptr() might sleep so it can't be) then the "restore"
> > part would restore the wrong mask. So it only looks strange and I go for
> > the pointer…
> 
> So maybe we could add the following facility:
> 
> 	ptr = sched_migrate_to_cpu_save(cpu);
> 
> 	...
> 
> 	sched_migrate_to_cpu_restore(ptr);
> 
> ... and use it in the cpufreq code. Then -rt could simply define migrate_disable() 
> to be:

Argh, no....

We have plenty of proper per-cpu kthreads / workqueue and other APIs to
do this.

Not to mention that implementing the above in a non-broken way has user
visible side-effects, which ugly.

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Thu, Apr 06, 2017 at 10:01:39AM +0200, Ingo Molnar wrote:
> I.e. just have a counter and these two APIs:
> 
>         static inline void migrate_disable(void)
>         {
>                 current->migration_disabled++;
>         }
> 
>         ...
> 
>         static inline void migrate_enable(void)
>         {
>                 current->migration_disabled--;
>         }
> 
> ... and make sure the scheduler migration code plus the CPU hotplug code considers 
> the counter.
> 
> Would this work, and would this be the simplest all around solution?

If you want to add expensive bits to hot paths like wakeups ... :/

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Thu, Apr 06, 2017 at 11:35:45AM +0200, Peter Zijlstra wrote:
> On Thu, Apr 06, 2017 at 10:01:39AM +0200, Ingo Molnar wrote:
> > I.e. just have a counter and these two APIs:
> > 
> >         static inline void migrate_disable(void)
> >         {
> >                 current->migration_disabled++;
> >         }
> > 
> >         ...
> > 
> >         static inline void migrate_enable(void)
> >         {
> >                 current->migration_disabled--;
> >         }
> > 
> > ... and make sure the scheduler migration code plus the CPU hotplug code considers 
> > the counter.
> > 
> > Would this work, and would this be the simplest all around solution?
> 
> If you want to add expensive bits to hot paths like wakeups ... :/

Hmm, doesn't that get us back to exactly where we were: ?

tsk_cpus_allowed() 
{
	if (!tsk->migration_disabled)
		return tsk->cpus_allowed;
	else
		return cpumask_of(task_cpu(tsk));
}

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Sebastian Andrzej Siewior]

On 2017-04-06 11:32:24 [+0200], Peter Zijlstra wrote:
> On Tue, Apr 04, 2017 at 08:42:02PM +0200, Sebastian Andrzej Siewior wrote:
> > While converting the existing users I tried to stick with the rules
> > above however… well mostly CPUFREQ tries to temporary switch the CPU
> > mask to do something on a certain CPU and then switches the mask back it
> > its original value.
> 
> 
> There's a bunch of that through ancient and rotten parts of the kernel.
> All those sites are broken.
> 
> Nothing stops userspace from setting a different affinity right after
> the kernel does for those threads.

Good. So you are saying I should convert them to something like
queue_work_on()?

Sebastian

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Thu, Apr 06, 2017 at 11:25:42AM +0200, Sebastian Andrzej Siewior wrote:
> > I.e. just have a counter and these two APIs:
> > 
> >         static inline void migrate_disable(void)
> >         {
> >                 current->migration_disabled++;
> plus
> 	if (current->migration_disabled == 1)
> 		get_online_cpus()

You want that other hotplug fast hack crap you have in rt, no? Because
mainline will not get anything other than prempt_disable() for
migrate_disable().

> >         }
> > 
> >         ...
> > 
> >         static inline void migrate_enable(void)
> >         {
> >                 current->migration_disabled--;
> >         }
> > 
> > ... and make sure the scheduler migration code plus the CPU hotplug code considers 
> > the counter.
> 
> So on the sched part I need go through all places where it looks at the
> mask and make sure it ignores the CPU switch decision. This could be
> doable.

Don't sprinkle that around. Use a wrapper like say: tsk_cpus_allowed()
to encapsulate that logic :-)

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Thu, Apr 06, 2017 at 11:46:33AM +0200, Sebastian Andrzej Siewior wrote:
> On 2017-04-06 11:32:24 [+0200], Peter Zijlstra wrote:
> > On Tue, Apr 04, 2017 at 08:42:02PM +0200, Sebastian Andrzej Siewior wrote:
> > > While converting the existing users I tried to stick with the rules
> > > above however… well mostly CPUFREQ tries to temporary switch the CPU
> > > mask to do something on a certain CPU and then switches the mask back it
> > > its original value.
> > 
> > 
> > There's a bunch of that through ancient and rotten parts of the kernel.
> > All those sites are broken.
> > 
> > Nothing stops userspace from setting a different affinity right after
> > the kernel does for those threads.
> 
> Good. So you are saying I should convert them to something like
> queue_work_on()?

Not sure; iirc there were a few variants. Some can indeed simply do
queue_work_on() and possibly wait for completion. some should maybe be a
per-cpu kthread, others will be more 'interesting'.

IIRC MIPS has a case where only 1 in N cores has an FPU. And once a task
uses FPU, it gets affined to the core that has one or something like
that.

Of course, nothing then stops someone else breaking that affinity. But I
suspect it will simply fault on the next FPU instruction and 'reset' the
mask or something. I've no clue and no real desire to know.

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Thomas Gleixner]

On Thu, 6 Apr 2017, Ingo Molnar wrote:
> Sorry if this is a back and forth - I was somehow convinced that we do need to 
> frob the cpus_allowed mask to get this functionality - but in hindsight I think 
> the counter should be enough.
> 
> I.e. just have a counter and these two APIs:
> 
>         static inline void migrate_disable(void)
>         {
>                 current->migration_disabled++;
>         }
> 
>         ...
> 
>         static inline void migrate_enable(void)
>         {
>                 current->migration_disabled--;
>         }
> 
> ... and make sure the scheduler migration code plus the CPU hotplug code considers 
> the counter.

We tried that some time ago, but there are a lot of places in the scheduler
which just rely on the cpus_allowed_mask, so we have to chase all of them
and make sure that new users do not ignore that counter. That's why we
chose the cpus_allowed_mask approach. And I still think that's the proper
thing to do.

Also this still requires magic in the context switch where we need to
transport that information to the CPU, so it can't go away.

CPU hotplug has other issues. If migration is disabled, then blocking out
the hotplug code is probably easy to do, but you need to undo the blocking
when the CPU is not longer pinned, i.e. if the last task enabled migration
again.

To make that all less horrible, we need to fix the stupid nested usage of
get_online_cpus() first. That'd allow us to convert the hotplug locking
into a percpu_rwsem, which is desired anyway as it makes get_online_cpus()
cheap.

So then the migration stuff becomes:

void migrate_disable(void)
{
	if (in_atomic() || irqs_disabled())
		return;

	if (!current->migration_disabled) {
		percpu_down_read_preempt_disable(hotplug_rwsem);
		current->migration_disabled++;
		preempt_enable();
	} else {
		current->migration_disabled++;
	}
}

void migrate_enable(void)
{
	if (in_atomic() || irqs_disabled())
		return;

	if (current->migration_disabled == 1) {
	   	preempt_disable();
		current->migration_disabled--;
		percpu_up_read_preempt_enable(hotplug_rwsem);
	} else {
		current->migration_disabled--;
	}
}

That want's to have some debug extras: see the current RT version of it.

Coming back to the cpus_allowed mask.

Most of the cpus_allowed usage outside of the scheduler is broken and we
really should clean that up now and then restrict access to cpus_allowed.

The easy ones (and the majority) are those:

 cpumask_copy(saved_mask, &current->cpus_allowed);
 set_cpus_allowed_ptr(current, cpumask_of(XXX));
 do_something();
 set_cpus_allowed_ptr(current, saved_mask);

That code is not at all protected against user space changing affinity or
cpus going down. We better do that now before doing anything about
cpus_allowed in the core code.

Thanks,

	tglx

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Thomas Gleixner]

[-- Attachment #1: Type: text/plain, Size: 1888 bytes --]

On Thu, 6 Apr 2017, Peter Zijlstra wrote:
> On Thu, Apr 06, 2017 at 11:46:33AM +0200, Sebastian Andrzej Siewior wrote:
> > On 2017-04-06 11:32:24 [+0200], Peter Zijlstra wrote:
> > > On Tue, Apr 04, 2017 at 08:42:02PM +0200, Sebastian Andrzej Siewior wrote:
> > > > While converting the existing users I tried to stick with the rules
> > > > above however… well mostly CPUFREQ tries to temporary switch the CPU
> > > > mask to do something on a certain CPU and then switches the mask back it
> > > > its original value.
> > > 
> > > 
> > > There's a bunch of that through ancient and rotten parts of the kernel.
> > > All those sites are broken.
> > > 
> > > Nothing stops userspace from setting a different affinity right after
> > > the kernel does for those threads.
> > 
> > Good. So you are saying I should convert them to something like
> > queue_work_on()?
> 
> Not sure; iirc there were a few variants. Some can indeed simply do
> queue_work_on() and possibly wait for completion. some should maybe be a
> per-cpu kthread, others will be more 'interesting'.
> 
> IIRC MIPS has a case where only 1 in N cores has an FPU. And once a task
> uses FPU, it gets affined to the core that has one or something like
> that.
>
> Of course, nothing then stops someone else breaking that affinity. But I
> suspect it will simply fault on the next FPU instruction and 'reset' the
> mask or something. I've no clue and no real desire to know.

It does nasty games with it's own storage of p->thread.user_cpus_allowed
and a fully seperate implementation of sys_sched_set|getaffinity.

Plus a magic trap handler which forces the thread to a CPU with FPU when
the user_cpus_allowed mask intersects with the cpus_with_fpu_mask...

Magic crap, which could all be replaced by a simple function in the
scheduler which allows to push a task to a FPU CPU and then disable
migration.

Thanks,

	tglx

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Thu, Apr 06, 2017 at 12:47:21PM +0200, Thomas Gleixner wrote:
> On Thu, 6 Apr 2017, Peter Zijlstra wrote:

> > IIRC MIPS has a case where only 1 in N cores has an FPU. And once a task
> > uses FPU, it gets affined to the core that has one or something like
> > that.
> >
> > Of course, nothing then stops someone else breaking that affinity. But I
> > suspect it will simply fault on the next FPU instruction and 'reset' the
> > mask or something. I've no clue and no real desire to know.
> 
> It does nasty games with it's own storage of p->thread.user_cpus_allowed
> and a fully seperate implementation of sys_sched_set|getaffinity.
> 
> Plus a magic trap handler which forces the thread to a CPU with FPU when
> the user_cpus_allowed mask intersects with the cpus_with_fpu_mask...
> 
> Magic crap, which could all be replaced by a simple function in the
> scheduler which allows to push a task to a FPU CPU and then disable
> migration.

If its even halfway coherent, I'd much rather let it stay where it it.

I really want to limit migrate_disable() to PREEMPT_RT=y where its used
to preserve spinlock semantics and not allow random other
migrate_disable() usage in the kernel.

Also note, that per the above, it can actually migrate to any core that
has an FPU on, so its not a good match for migrate_disable() in any
case.

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Thomas Gleixner]

On Thu, 6 Apr 2017, Peter Zijlstra wrote:
> On Thu, Apr 06, 2017 at 11:25:42AM +0200, Sebastian Andrzej Siewior wrote:
> > > I.e. just have a counter and these two APIs:
> > > 
> > >         static inline void migrate_disable(void)
> > >         {
> > >                 current->migration_disabled++;
> > plus
> > 	if (current->migration_disabled == 1)
> > 		get_online_cpus()
> 
> You want that other hotplug fast hack crap you have in rt, no?

As I said in the other mail, we certainly want to make get_online_cpus()
fast independently of RT. That's on our todo list anyway.

> Because mainline will not get anything other than prempt_disable() for
> migrate_disable().

I'm not yet convinced of that. There is enough stuff which pointlessly
disables preemption and works around the restrictions caused by that or
plays games with cpus_allowed just to stay on a particular cpu.

I know you don't like it because it imposes restrictions on schedulability,
but disabling preemption for a long time or playing cpus_allowed games has
the same and worse effects.

Thanks,

	tglx

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Ingo Molnar]

* Thomas Gleixner <tglx@linutronix.de> wrote:

> On Thu, 6 Apr 2017, Ingo Molnar wrote:
>
> > Sorry if this is a back and forth - I was somehow convinced that we do need to 
> > frob the cpus_allowed mask to get this functionality - but in hindsight I 
> > think the counter should be enough.
> > 
> > I.e. just have a counter and these two APIs:
> > 
> >         static inline void migrate_disable(void)
> >         {
> >                 current->migration_disabled++;
> >         }
> > 
> >         ...
> > 
> >         static inline void migrate_enable(void)
> >         {
> >                 current->migration_disabled--;
> >         }
> > 
> > ... and make sure the scheduler migration code plus the CPU hotplug code considers 
> > the counter.
> 
> We tried that some time ago, but there are a lot of places in the scheduler 
> which just rely on the cpus_allowed_mask, so we have to chase all of them and 
> make sure that new users do not ignore that counter. That's why we chose the 
> cpus_allowed_mask approach. And I still think that's the proper thing to do.

But but ...

The number of places in the scheduler where we actually end up migrating a task is 
pretty limited:

	try_to_wake_up():
		- main wakeup code

	migrate_swap():
		- active NUMA-balancing feature

	move_queued_task():
		- hotplug CPU-down migration
		- changing the affinity mask

The wakeup and NUMA balancing case is trivial to solve: it's an optimization and 
we can skip the migration if migration is disabled.

CPU hotplug and changing the affinity mask are the more complex cases, because 
there migrating or not migrating is a correctness issue:

 - CPU hotplug has to be aware of this anyway, regardless of whether it's solved 
   via a counter of the affinity mask.

 - Changing the affinity mask (set_cpus_allowed()) has two main cases:
   the synchronous and asynchronous case:

     - synchronous is when the current task changes its own affinity mask, this 
       should work fine mostly out of box, as we don't call set_cpus_allowed() 
       from inside migration disabled regions. (We can enforce this via a 
       debugging check.)

     - The asynchronous case is when the affinity task of some other task is 
       changed - this would not have an immediate effect with migration-disabled 
       logic, the migration would be delayed to when migration is re-enabled 
       again.

As for general fragility, is there any reason why a simple debugging check in 
set_task_cpu() would not catch most mishaps:

	WARN_ON_ONCE(p->state != TASK_RUNNING && p->migration_disabled);

... or something like that?

I.e. my point is that I think using a counter would be much simpler, yet still as 
robust and maintainable. We could in fact move migrate_disable()/enable() upstream 
straight away and eliminate this small fork of functionality between mainline and 
-rt.

Thanks,

	Ingo

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Thomas Gleixner]

On Thu, 6 Apr 2017, Peter Zijlstra wrote:
> On Thu, Apr 06, 2017 at 12:47:21PM +0200, Thomas Gleixner wrote:
> > On Thu, 6 Apr 2017, Peter Zijlstra wrote:
> 
> > > IIRC MIPS has a case where only 1 in N cores has an FPU. And once a task
> > > uses FPU, it gets affined to the core that has one or something like
> > > that.
> > >
> > > Of course, nothing then stops someone else breaking that affinity. But I
> > > suspect it will simply fault on the next FPU instruction and 'reset' the
> > > mask or something. I've no clue and no real desire to know.
> > 
> > It does nasty games with it's own storage of p->thread.user_cpus_allowed
> > and a fully seperate implementation of sys_sched_set|getaffinity.
> > 
> > Plus a magic trap handler which forces the thread to a CPU with FPU when
> > the user_cpus_allowed mask intersects with the cpus_with_fpu_mask...
> > 
> > Magic crap, which could all be replaced by a simple function in the
> > scheduler which allows to push a task to a FPU CPU and then disable
> > migration.
> 
> If its even halfway coherent, I'd much rather let it stay where it it.
> 
> I really want to limit migrate_disable() to PREEMPT_RT=y where its used
> to preserve spinlock semantics and not allow random other
> migrate_disable() usage in the kernel.
> 
> Also note, that per the above, it can actually migrate to any core that
> has an FPU on, so its not a good match for migrate_disable() in any
> case.

Fair enough, but I prefer to have the ability for a temporary restriction
of the user space visible cpus allowed mask in the core code, which can be
used for both migrate_disable() and things like that MIPS FPU stuff rather
than all those home brewn hackeries which are prone to bitrot, security
issues and subtle wreckage. cpus_allowed should be solely under sched core
control and not accessible from anything outside.

Thanks,

	tglx

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Thomas Gleixner]

On Thu, 6 Apr 2017, Ingo Molnar wrote:
> CPU hotplug and changing the affinity mask are the more complex cases, because 
> there migrating or not migrating is a correctness issue:
> 
>  - CPU hotplug has to be aware of this anyway, regardless of whether it's solved 
>    via a counter of the affinity mask.

You have to prevent CPU hotplug simply as long as there are migration
disabled tasks on the fly. Making that depend on whether they are on a CPU
which is about to be unplugged or not would be complete overkill as you
still have to solve the case that a task sets the migrate_disable() AFTER
the cpu down machinery started.

>  - Changing the affinity mask (set_cpus_allowed()) has two main cases:
>    the synchronous and asynchronous case:
> 
>      - synchronous is when the current task changes its own affinity mask, this 
>        should work fine mostly out of box, as we don't call set_cpus_allowed() 
>        from inside migration disabled regions. (We can enforce this via a 
>        debugging check.)
> 
>      - The asynchronous case is when the affinity task of some other task is 
>        changed - this would not have an immediate effect with migration-disabled 
>        logic, the migration would be delayed to when migration is re-enabled 
>        again.
> 
> As for general fragility, is there any reason why a simple debugging check in 
> set_task_cpu() would not catch most mishaps:
> 
> 	WARN_ON_ONCE(p->state != TASK_RUNNING && p->migration_disabled);
> 
> ... or something like that?
>
> I.e. my point is that I think using a counter would be much simpler, yet still as 
> robust and maintainable. We could in fact move migrate_disable()/enable() upstream 
> straight away and eliminate this small fork of functionality between mainline and 
> -rt.

The counter alone might be enough for the scheduler placement decisions,
but it cannot solve the hotplug issue. You still need something like I
sketched out in my previous reply.

Thanks,

	tglx

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Thu, Apr 06, 2017 at 12:58:27PM +0200, Thomas Gleixner wrote:
> On Thu, 6 Apr 2017, Peter Zijlstra wrote:

> > Because mainline will not get anything other than prempt_disable() for
> > migrate_disable().
> 
> I'm not yet convinced of that. There is enough stuff which pointlessly
> disables preemption and works around the restrictions caused by that or
> plays games with cpus_allowed just to stay on a particular cpu.
> 
> I know you don't like it because it imposes restrictions on schedulability,
> but disabling preemption for a long time or playing cpus_allowed games has
> the same and worse effects.

There really isn't much code that plays games with cpus_allowed. And
code that disabled preemption for a long time can surely be fixed, we've
done so many a time.

A pure migrate_disable() (without wrapping lock) is a straight up
nightmare, you can end up with a gazillion runnable tasks stuck to one
CPU and all other CPUs with their thumbs up their arses waiting for
work.

The moment you stick migrate_disable() in a lock, you at least get PI to
bail you out of some of the pain (but by no means all of it).

Adding migrate_disable() to the kernel is really just moving pain
around, it doesn't solve anything much.

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Thu, Apr 06, 2017 at 01:03:16PM +0200, Thomas Gleixner wrote:

> Fair enough, but I prefer to have the ability for a temporary restriction
> of the user space visible cpus allowed mask in the core code, which can be
> used for both migrate_disable() and things like that MIPS FPU stuff rather
> than all those home brewn hackeries which are prone to bitrot, security
> issues and subtle wreckage. cpus_allowed should be solely under sched core
> control and not accessible from anything outside.

So the big difference between what MIPS does and what migrate_disable()
needs here is the amount of storage.

For migrate_disable() we don't need a whole second cpumask bitmap. We
can simply use one of the static cpumask_of() things.

Given that cpumask bitmaps can be quite large, adding another one to
task_struct just for $very_rare_occasion, doesn't seem like a good
thing.

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Thomas Gleixner]

On Thu, 6 Apr 2017, Peter Zijlstra wrote:
> On Thu, Apr 06, 2017 at 01:03:16PM +0200, Thomas Gleixner wrote:
> 
> > Fair enough, but I prefer to have the ability for a temporary restriction
> > of the user space visible cpus allowed mask in the core code, which can be
> > used for both migrate_disable() and things like that MIPS FPU stuff rather
> > than all those home brewn hackeries which are prone to bitrot, security
> > issues and subtle wreckage. cpus_allowed should be solely under sched core
> > control and not accessible from anything outside.
> 
> So the big difference between what MIPS does and what migrate_disable()
> needs here is the amount of storage.
> 
> For migrate_disable() we don't need a whole second cpumask bitmap. We
> can simply use one of the static cpumask_of() things.
> 
> Given that cpumask bitmaps can be quite large, adding another one to
> task_struct just for $very_rare_occasion, doesn't seem like a good
> thing.

A pointer to the effective mask is definitely enough. And that's what we
need for migrate_disable() as well. That still leaves the storage
requirement to MIPS.

Thanks,

	tglx

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Peter Zijlstra]

On Thu, Apr 06, 2017 at 01:56:12PM +0200, Thomas Gleixner wrote:

> A pointer to the effective mask is definitely enough. And that's what we
> need for migrate_disable() as well. That still leaves the storage
> requirement to MIPS.

So then you're back to Ingo's proposal, right?

Re: [RFC PATCH] kernel: sched: Provide a pointer to the valid CPU mask

[Ingo Molnar]

* Thomas Gleixner <tglx@linutronix.de> wrote:

> On Thu, 6 Apr 2017, Ingo Molnar wrote:
> > CPU hotplug and changing the affinity mask are the more complex cases, because 
> > there migrating or not migrating is a correctness issue:
> > 
> >  - CPU hotplug has to be aware of this anyway, regardless of whether it's solved 
> >    via a counter of the affinity mask.
> 
> You have to prevent CPU hotplug simply as long as there are migration disabled 
> tasks on the fly. Making that depend on whether they are on a CPU which is about 
> to be unplugged or not would be complete overkill as you still have to solve the 
> case that a task sets the migrate_disable() AFTER the cpu down machinery 
> started.
>
> [...]
>
> The counter alone might be enough for the scheduler placement decisions, but it 
> cannot solve the hotplug issue. You still need something like I sketched out in 
> my previous reply.

Yes, so what you outlined:

void migrate_disable(void)
{
        if (in_atomic() || irqs_disabled())
                return;

        if (!current->migration_disabled) {
                percpu_down_read_preempt_disable(hotplug_rwsem);
                current->migration_disabled++;
                preempt_enable();
        } else {
                current->migration_disabled++;
        }
}

Would solve it?

I.e. my point is: whether migrate_disable()/enable() is implemented via a counter 
or a pointer to a cpumask does not materially change how the CPU-hotplug solution 
looks like, right?

I.e. we could just use the counter and avoid the whole wrapping of cpumask 
complexity.

Thanks,

	Ingo

[lkp-robot] [kernel] c1f943ee40: kernel_BUG_at_kernel/smpboot.c

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3823 bytes --]


FYI, we noticed the following commit:

commit: c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e ("kernel: sched: Provide a pointer to the valid CPU mask")
url: https://github.com/0day-ci/linux/commits/Sebastian-Andrzej-Siewior/kernel-sched-Provide-a-pointer-to-the-valid-CPU-mask/20170405-093637


in testcase: trinity
with following parameters:

	runtime: 300s

test-description: Trinity is a linux system call fuzz tester.
test-url: http://codemonkey.org.uk/projects/trinity/


on test machine: qemu-system-x86_64 -enable-kvm -smp 2 -m 420M

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+------------------------------------------+------------+------------+
|                                          | 89970a04d7 | c1f943ee40 |
+------------------------------------------+------------+------------+
| boot_successes                           | 12         | 2          |
| boot_failures                            | 0          | 10         |
| kernel_BUG_at_kernel/smpboot.c           | 0          | 10         |
| invalid_opcode:#[##]                     | 0          | 10         |
| EIP:smpboot_thread_fn                    | 0          | 10         |
| Kernel_panic-not_syncing:Fatal_exception | 0          | 10         |
+------------------------------------------+------------+------------+



[    0.302283] kernel BUG at kernel/smpboot.c:137!
[    0.302283] kernel BUG at kernel/smpboot.c:137!
[    0.304242] invalid opcode: 0000 [#1] PREEMPT SMP
[    0.304242] invalid opcode: 0000 [#1] PREEMPT SMP
[    0.306065] Modules linked in:
[    0.306065] Modules linked in:
[    0.307436] CPU: 0 PID: 14 Comm: cpuhp/1 Not tainted 4.11.0-rc4-00065-gc1f943e #74
[    0.307436] CPU: 0 PID: 14 Comm: cpuhp/1 Not tainted 4.11.0-rc4-00065-gc1f943e #74
[    0.310000] task: 57520000 task.stack: 5751a000
[    0.310000] task: 57520000 task.stack: 5751a000
[    0.310000] EIP: smpboot_thread_fn+0x380/0x3e0
[    0.310000] EIP: smpboot_thread_fn+0x380/0x3e0
[    0.310000] EFLAGS: 00210202 CPU: 0
[    0.310000] EFLAGS: 00210202 CPU: 0
[    0.310000] EAX: 587bd950 EBX: 57520000 ECX: 00000000 EDX: 00000001
[    0.310000] EAX: 587bd950 EBX: 57520000 ECX: 00000000 EDX: 00000001
[    0.310000] ESI: 00000000 EDI: 00000001 EBP: 5751bf80 ESP: 5751bf64
[    0.310000] ESI: 00000000 EDI: 00000001 EBP: 5751bf80 ESP: 5751bf64
[    0.310000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.310000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.310000] CR0: 80050033 CR2: ffffffff CR3: 189fa000 CR4: 00000690
[    0.310000] CR0: 80050033 CR2: ffffffff CR3: 189fa000 CR4: 00000690
[    0.310000] Call Trace:
[    0.310000] Call Trace:
[    0.310000]  kthread+0xdf/0x110
[    0.310000]  kthread+0xdf/0x110
[    0.310000]  ? sort_range+0x30/0x30
[    0.310000]  ? sort_range+0x30/0x30
[    0.310000]  ? kthread_create_on_node+0x30/0x30
[    0.310000]  ? kthread_create_on_node+0x30/0x30
[    0.310000]  ret_from_fork+0x21/0x30
[    0.310000]  ret_from_fork+0x21/0x30
[    0.310000] Code: 8b 50 04 85 d2 74 10 8b 00 31 d2 0f a3 05 50 dc 81 58 0f 92 c2 ff d1 8b 45 ec e8 bc 67 17 00 83 c4 10 31 c0 5b 5e 5f 5d c3 66 90 <0f> 0b 8d b6 00 00 00 00 b8 01 00 00 00 e8 3e 41 00 00 e8 a9 de
[    0.310000] Code: 8b 50 04 85 d2 74 10 8b 00 31 d2 0f a3 05 50 dc 81 58 0f 92 c2 ff d1 8b 45 ec e8 bc 67 17 00 83 c4 10 31 c0 5b 5e 5f 5d c3 66 90 <0f> 0b 8d b6 00 00 00 00 b8 01 00 00 00 e8 3e 41 00 00 e8 a9 de
[    0.310000] EIP: smpboot_thread_fn+0x380/0x3e0 SS:ESP: 0068:5751bf64
[    0.310000] EIP: smpboot_thread_fn+0x380/0x3e0 SS:ESP: 0068:5751bf64
[    0.310013] ---[ end trace b192179aeb6bf756 ]---


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script  # job-script is attached in this email



Thanks,
Xiaolong

[-- Attachment #2: config-4.11.0-rc4-00065-gc1f943e --]
[-- Type: text/plain, Size: 112555 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.11.0-rc4 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_MEMCG_SWAP is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
# CONFIG_SOCK_CGROUP_DATA is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_POSIX_TIMERS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_MEMCG_SYSFS_ON=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
CONFIG_GCC_PLUGIN_CYC_COMPLEXITY=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_TRIM_UNUSED_KSYMS=y
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_ZONED=y
# CONFIG_BLK_CMDLINE_PARSER is not set
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_SQ is not set
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_MQ_IOSCHED_DEADLINE=m
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_FAST_FEATURE_TESTS is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT_A is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=m
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
# CONFIG_STA2X11 is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
CONFIG_MVIAC3_2=y
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
CONFIG_PERF_EVENTS_AMD_POWER=y
CONFIG_X86_LEGACY_VM86=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_1G=y
CONFIG_PAGE_OFFSET=0x40000000
CONFIG_HIGHMEM=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=m
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=m
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_FRAME_VECTOR=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
CONFIG_X86_INTEL_MPX=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOOLPC=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_PCIEASPM_DEFAULT is not set
CONFIG_PCIEASPM_POWERSAVE=y
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_PLAT=y

#
# PCI host controller drivers
#
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
# CONFIG_EISA_PCI_EISA is not set
CONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
CONFIG_SCx200=y
# CONFIG_SCx200HR_TIMER is not set
CONFIG_OLPC=y
# CONFIG_OLPC_XO1_PM is not set
# CONFIG_OLPC_XO15_SCI is not set
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_GRO_CELLS is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# CONFIG_DMA_CMA is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
CONFIG_VIRTIO_BLK_SCSI=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=m
CONFIG_BLK_DEV_NVME_SCSI=y
CONFIG_NVME_FABRICS=y
# CONFIG_NVME_FC is not set
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_FC=m

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=m
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=m
CONFIG_SRAM=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_LEGACY=y
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_IDE_GD is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
# CONFIG_BLK_DEV_CS5536 is not set
CONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=m
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not set
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_TC86C001=y

#
# Other IDE chipsets support
#

#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=m
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=y
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
# CONFIG_SCSI_MVUMI is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_SMARTPQI=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_UFS_DWC_TC_PCI=y
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_SCSI_SNIC=m
CONFIG_SCSI_SNIC_DEBUG_FS=y
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_ISCI=y
CONFIG_SCSI_GENERIC_NCR5380=y
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_NCR53C406A=y
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_FAS=m
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_SIM710=y
CONFIG_SCSI_SYM53C416=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_NSP32=y
CONFIG_SCSI_WD719X=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_AHCI_CEVA=m
# CONFIG_AHCI_QORIQ is not set
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_MQ_DEFAULT=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
CONFIG_DM_ERA=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
# CONFIG_TCM_PSCSI is not set
# CONFIG_TCM_USER2 is not set
# CONFIG_LOOPBACK_TARGET is not set
# CONFIG_ISCSI_TARGET is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
CONFIG_NVM=y
CONFIG_NVM_DEBUG=y
CONFIG_NVM_RRPC=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_OLPC is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=y
# CONFIG_NOZOMI is not set
CONFIG_ISI=y
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=m
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
# CONFIG_SERIAL_8250_ACCENT is not set
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=y
CONFIG_SERIAL_8250_HUB6=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=m
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_MOXA=m
# CONFIG_SERIAL_OF_PLATFORM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=m
# CONFIG_SERIAL_SC16IS7XX is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_PCH_UART=m
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
CONFIG_SERIAL_MEN_Z135=m
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
CONFIG_TTY_PRINTK=m
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_DTLK=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_MWAVE=y
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_CRB is not set
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=m
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EG20T=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_PCI=y
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
# CONFIG_I2C_DLN2 is not set
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_CROS_EC_TUNNEL is not set
CONFIG_SCx200_ACB=y
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=m

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
CONFIG_GPIO_ICH=y
# CONFIG_GPIO_LYNXPOINT is not set
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_MOCKUP=m
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XILINX is not set

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=m
CONFIG_GPIO_104_IDIO_16=y
# CONFIG_GPIO_104_IDI_48 is not set
CONFIG_GPIO_F7188X=m
# CONFIG_GPIO_GPIO_MM is not set
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WS16C48 is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_CS5535=m
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
# CONFIG_GPIO_JANZ_TTL is not set
CONFIG_GPIO_KEMPLD=m
# CONFIG_GPIO_LP3943 is not set
CONFIG_GPIO_LP873X=m
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TC3589X=y
# CONFIG_GPIO_TIMBERDALE is not set
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS65912=m
# CONFIG_GPIO_WHISKEY_COVE is not set
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=m

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=m
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_ML_IOH=m
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
CONFIG_GPIO_RDC321X=y
# CONFIG_GPIO_SODAVILLE is not set

#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=y

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# CONFIG_W1 is not set
CONFIG_POWER_AVS=y
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_BATTERY_ACT8945A is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_OLPC is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_DA9150 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_MAX14577 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77693 is not set
# CONFIG_CHARGER_MAX8998 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_DELL_SMM is not set
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_I5500=m
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2990=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
# CONFIG_SENSORS_PMBUS is not set
# CONFIG_SENSORS_ADM1275 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX20751=m
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS1015=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
CONFIG_SENSORS_TC74=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM8350 is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
CONFIG_INTEL_SOC_DTS_THERMAL=m

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_BXT_PMIC_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_GENERIC_ADC_THERMAL=m
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
CONFIG_BCMA_HOST_SOC=y
# CONFIG_BCMA_DRIVER_PCI is not set
CONFIG_BCMA_SFLASH=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=m
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=m
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_CROS_EC=m
# CONFIG_MFD_CROS_EC_I2C is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=m
CONFIG_MFD_DLN2=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_HI6421_PMIC=m
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=m
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=y
CONFIG_MFD_RTSX_USB=m
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SMSC=y
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=m
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_88PM8607=m
CONFIG_REGULATOR_ACT8865=m
# CONFIG_REGULATOR_ACT8945A is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=m
# CONFIG_REGULATOR_AS3711 is not set
CONFIG_REGULATOR_AS3722=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=m
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP873X=m
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=m
# CONFIG_REGULATOR_MAX14577 is not set
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_PALMAS=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=m
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
CONFIG_REGULATOR_RK808=m
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_TPS51632=m
# CONFIG_REGULATOR_TPS6105X is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=m
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65218=m
CONFIG_REGULATOR_TPS65912=m
# CONFIG_REGULATOR_WM8350 is not set
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_WM8994=y
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CEC_DEBUG=y
CONFIG_MEDIA_CEC_EDID=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_VIDEO_PCI_SKELETON is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=16
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
# CONFIG_USB_STV06XX is not set
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
# CONFIG_USB_GSPCA_MR97310A is not set
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
# CONFIG_USB_GSPCA_SQ905 is not set
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
# CONFIG_USB_GSPCA_T613 is not set
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
# CONFIG_USB_GSPCA_TV8532 is not set
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_USB_PWC is not set
CONFIG_VIDEO_CPIA2=m
# CONFIG_USB_ZR364XX is not set
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set

#
# Analog/digital TV USB devices
#
# CONFIG_VIDEO_AU0828 is not set

#
# Digital TV USB devices
#
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
# CONFIG_DVB_USB_ANYSEE is not set
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
# CONFIG_DVB_USB_CE6230 is not set
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_MXL111SF=m
# CONFIG_DVB_USB_RTL28XXU is not set
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_TTUSB_BUDGET=m
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_USB_DRV is not set
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
# CONFIG_VIDEO_EM28XX_DVB is not set

#
# Software defined radio USB devices
#
# CONFIG_USB_AIRSPY is not set
# CONFIG_USB_HACKRF is not set

#
# USB HDMI CEC adapters
#
# CONFIG_USB_PULSE8_CEC is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
CONFIG_VIDEO_TW5864=m
# CONFIG_VIDEO_TW68 is not set
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
# CONFIG_VIDEO_ZORAN_BUZ is not set
CONFIG_VIDEO_ZORAN_DC10=m
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZORAN_LML33R10 is not set
CONFIG_VIDEO_ZORAN_AVS6EYES=m

#
# Media capture/analog TV support
#
CONFIG_VIDEO_HEXIUM_GEMINI=m
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
CONFIG_VIDEO_DT3155=m

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_ADV7175=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_TS2020=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_CX22700=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
CONFIG_DVB_ZD1301_DEMOD=m
# CONFIG_DVB_GP8PSK_FE is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_SP2=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=m
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=m
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
# CONFIG_FB_GEODE_GX is not set
# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=m
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=m
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_MAX8925=m
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_PM8941_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_OT200=m
CONFIG_BACKLIGHT_SKY81452=y
# CONFIG_BACKLIGHT_AS3711 is not set
CONFIG_BACKLIGHT_GPIO=y
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=m
CONFIG_VGASTATE=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_OTG_FSM=y
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=m
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=m
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=m
CONFIG_USB_HCD_TEST_MODE=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=y
# CONFIG_REALTEK_AUTOPM is not set
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
# CONFIG_USB_STORAGE_SDDR09 is not set
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=m
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=m
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#

#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_HOST=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
# CONFIG_USB_DWC3_OF_SIMPLE is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PCI is not set
CONFIG_USB_DWC2_DEBUG=y
# CONFIG_USB_DWC2_VERBOSE is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_DWC2_DEBUG_PERIODIC=y
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_OF=m
CONFIG_USB_CHIPIDEA_PCI=m
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_CHIPIDEA_ULPI is not set
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_BELKIN is not set
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_F8153X=m
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
CONFIG_USB_SERIAL_WISHBONE=m
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=y
# CONFIG_USB_HSIC_USB4604 is not set
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_UCSI is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
CONFIG_USB_ISP1301=y
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
CONFIG_USB_FOTG210_UDC=m
CONFIG_USB_GR_UDC=m
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
CONFIG_USB_MV_U3D=m
CONFIG_USB_M66592=m
# CONFIG_USB_BDC_UDC is not set
CONFIG_USB_AMD5536UDC=m
CONFIG_USB_NET2272=m
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GOKU is not set
CONFIG_USB_EG20T=m
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_F_TCM=m
CONFIG_USB_CONFIGFS=m
# CONFIG_USB_CONFIGFS_SERIAL is not set
CONFIG_USB_CONFIGFS_ACM=y
# CONFIG_USB_CONFIGFS_OBEX is not set
# CONFIG_USB_CONFIGFS_NCM is not set
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
# CONFIG_USB_CONFIGFS_RNDIS is not set
# CONFIG_USB_CONFIGFS_EEM is not set
# CONFIG_USB_CONFIGFS_MASS_STORAGE is not set
CONFIG_USB_CONFIGFS_F_LB_SS=y
# CONFIG_USB_CONFIGFS_F_FS is not set
# CONFIG_USB_CONFIGFS_F_HID is not set
# CONFIG_USB_CONFIGFS_F_UVC is not set
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
# CONFIG_USB_FUNCTIONFS_ETH is not set
# CONFIG_USB_FUNCTIONFS_RNDIS is not set
CONFIG_USB_FUNCTIONFS_GENERIC=y
# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_GADGET_TARGET=m
# CONFIG_USB_G_SERIAL is not set
CONFIG_USB_G_PRINTER=m
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
# CONFIG_USB_G_WEBCAM is not set
CONFIG_USB_ULPI_BUS=m
CONFIG_UWB=y
CONFIG_UWB_HWA=m
# CONFIG_UWB_WHCI is not set
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_PWRSEQ_EMMC=m
# CONFIG_PWRSEQ_SIMPLE is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_OF_ARASAN is not set
CONFIG_MMC_SDHCI_OF_AT91=m
# CONFIG_MMC_SDHCI_CADENCE is not set
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
# CONFIG_MMC_REALTEK_USB is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
CONFIG_MMC_MTK=m
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_BCM6328 is not set
CONFIG_LEDS_BCM6358=m
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3533=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA9052=m
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=y
# CONFIG_LEDS_MENF21BMC is not set
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_USER=m
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
# CONFIG_EDAC_I82875P is not set
CONFIG_EDAC_I82975X=m
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I82860 is not set
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=m
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_AS3722=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_MAX8907 is not set
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV8803=m
CONFIG_RTC_DRV_S5M=y

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=y

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
CONFIG_RTC_DRV_DS17885=y
# CONFIG_RTC_DS1685_PROC_REGS is not set
# CONFIG_RTC_DS1685_SYSFS_REGS is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=m
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_WM8350 is not set
CONFIG_RTC_DRV_PCF50633=m
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SNVS is not set
CONFIG_RTC_DRV_R7301=y

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_FSL_EDMA=m
CONFIG_INTEL_IDMA64=y
CONFIG_PCH_DMA=m
CONFIG_TIMB_DMA=m
CONFIG_QCOM_HIDMA_MGMT=m
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=m
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=m

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_COMEDI is not set
# CONFIG_FB_OLPC_DCON is not set
CONFIG_RTS5208=y

#
# IIO staging drivers
#

#
# Accelerometers
#

#
# Analog to digital converters
#
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_I2C=m

#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7152=m
CONFIG_AD7746=m

#
# Direct Digital Synthesis
#

#
# Digital gyroscope sensors
#

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m

#
# Light sensors
#
CONFIG_SENSORS_ISL29028=m
CONFIG_TSL2x7x=m

#
# Active energy metering IC
#
CONFIG_ADE7854=m
# CONFIG_ADE7854_I2C is not set

#
# Resolver to digital converters
#

#
# Triggers - standalone
#
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
CONFIG_STAGING_MEDIA=y
CONFIG_DVB_CXD2099=m

#
# Android
#
# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
# CONFIG_ION is not set
CONFIG_STAGING_BOARD=y
# CONFIG_LTE_GDM724X is not set
CONFIG_DGNC=y
# CONFIG_GS_FPGABOOT is not set
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_MOST=y
CONFIG_MOSTCORE=y
# CONFIG_AIM_CDEV is not set
# CONFIG_AIM_NETWORK is not set
CONFIG_AIM_V4L2=m
CONFIG_HDM_I2C=m
# CONFIG_HDM_USB is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
CONFIG_INTEL_PMC_CORE=y
CONFIG_IBM_RTL=m
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=m
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_INTEL_PUNIT_IPC=y
# CONFIG_MLX_CPLD_PLATFORM is not set
CONFIG_PMC_ATOM=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_PSTORE=m
# CONFIG_CROS_EC_CHARDEV is not set
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_RK808 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_CDCE706=m
CONFIG_COMMON_CLK_CDCE925=m
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=m
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PALMAS=m
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_COMMON_CLK_VC5 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=m
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=m
# CONFIG_MAILBOX_TEST is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_SOC_ZTE is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=m
CONFIG_DEVFREQ_GOV_USERSPACE=m
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=m

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_INTEL_INT3496 is not set
# CONFIG_EXTCON_MAX14577 is not set
CONFIG_EXTCON_MAX3355=m
# CONFIG_EXTCON_MAX77693 is not set
CONFIG_EXTCON_MAX77843=m
# CONFIG_EXTCON_PALMAS is not set
CONFIG_EXTCON_QCOM_SPMI_MISC=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_MEMORY=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
CONFIG_IIO_SW_TRIGGER=m

#
# Accelerometers
#
CONFIG_BMA180=m
# CONFIG_BMC150_ACCEL is not set
CONFIG_DA280=m
# CONFIG_DA311 is not set
CONFIG_DMARD06=m
CONFIG_DMARD09=m
CONFIG_DMARD10=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
# CONFIG_MMA7660 is not set
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m

#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
# CONFIG_AD799X is not set
# CONFIG_CC10001_ADC is not set
# CONFIG_DA9150_GPADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HX711=m
# CONFIG_INA2XX_ADC is not set
# CONFIG_LTC2485 is not set
CONFIG_MAX1363=m
CONFIG_MCP3422=m
CONFIG_MEN_Z188_ADC=m
CONFIG_NAU7802=m
# CONFIG_PALMAS_GPADC is not set
# CONFIG_STX104 is not set
# CONFIG_TI_ADC081C is not set
CONFIG_TI_ADS1015=m
CONFIG_TI_AM335X_ADC=m
CONFIG_VF610_ADC=m
CONFIG_VIPERBOARD_ADC=m

#
# Amplifiers
#

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
CONFIG_IAQCORE=m
# CONFIG_VZ89X is not set
# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set

#
# Hid Sensor IIO Common
#
CONFIG_IIO_MS_SENSORS_I2C=m

#
# SSP Sensor Common
#
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Counters
#
# CONFIG_104_QUAD_8 is not set

#
# Digital to analog converters
#
CONFIG_AD5064=m
# CONFIG_AD5380 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5593R is not set
# CONFIG_CIO_DAC is not set
CONFIG_DPOT_DAC=m
CONFIG_M62332=m
# CONFIG_MAX517 is not set
CONFIG_MAX5821=m
CONFIG_MCP4725=m
CONFIG_VF610_DAC=m

#
# IIO dummy driver
#

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#

#
# Phase-Locked Loop (PLL) frequency synthesizers
#

#
# Digital gyroscope sensors
#
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set

#
# Humidity sensors
#
CONFIG_AM2315=m
CONFIG_DHT11=m
CONFIG_HDC100X=m
# CONFIG_HTS221 is not set
# CONFIG_HTU21 is not set
CONFIG_SI7005=m
CONFIG_SI7020=m

#
# Inertial measurement units
#
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_KMX61=m
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
# CONFIG_ADJD_S311 is not set
CONFIG_AL3320A=m
CONFIG_APDS9300=m
# CONFIG_APDS9960 is not set
CONFIG_BH1750=m
# CONFIG_BH1780 is not set
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
CONFIG_CM3605=m
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=m
CONFIG_SENSORS_ISL29018=m
CONFIG_ISL29125=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
# CONFIG_LTR501 is not set
# CONFIG_MAX44000 is not set
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
CONFIG_TSL4531=m
# CONFIG_US5182D is not set
CONFIG_VCNL4000=m
CONFIG_VEML6070=m

#
# Magnetometer sensors
#
CONFIG_AK8974=m
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_MAG3110=m
CONFIG_MMC35240=m
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m

#
# Inclinometer sensors
#

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
# CONFIG_IIO_SYSFS_TRIGGER is not set

#
# Digital potentiometers
#
CONFIG_DS1803=m
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=m

#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set

#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_HP03=m
# CONFIG_MPL115_I2C is not set
CONFIG_MPL3115=m
CONFIG_MS5611=m
# CONFIG_MS5611_I2C is not set
CONFIG_MS5637=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_T5403=m
CONFIG_HP206C=m
# CONFIG_ZPA2326 is not set

#
# Lightning sensors
#

#
# Proximity and distance sensors
#
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set

#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
CONFIG_TMP006=m
CONFIG_TMP007=m
CONFIG_TSYS01=m
# CONFIG_TSYS02D is not set
CONFIG_NTB=m
# CONFIG_NTB_PINGPONG is not set
CONFIG_NTB_TOOL=m
# CONFIG_NTB_PERF is not set
CONFIG_NTB_TRANSPORT=m
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
# CONFIG_VME_CA91CX42 is not set
CONFIG_VME_TSI148=m
# CONFIG_VME_FAKE is not set

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y

#
# VME Device Drivers
#
CONFIG_VME_USER=m
CONFIG_VME_PIO2=m
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_CRC=y
CONFIG_PWM_CROS_EC=m
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=m
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_TI_SYSCON_RESET=m
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_EXYNOS4210_USB2 is not set
# CONFIG_PHY_EXYNOS4X12_USB2 is not set
# CONFIG_PHY_EXYNOS5250_USB2 is not set
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_TUSB1210=m
# CONFIG_POWERCAP is not set
CONFIG_MCB=m
CONFIG_MCB_PCI=m
CONFIG_MCB_LPC=m

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
CONFIG_DEV_DAX=y
CONFIG_NR_DEV_DAX=32768
CONFIG_NVMEM=y
CONFIG_STM=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
# CONFIG_STM_SOURCE_FTRACE is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
CONFIG_BTRFS_ASSERT=y
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
CONFIG_F2FS_IO_TRACE=y
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_PERF_TEST=m
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BRANCH_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_MMIOTRACE_TEST is not set
CONFIG_TRACEPOINT_BENCHMARK=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
CONFIG_TRACE_ENUM_MAP_FILE=y
# CONFIG_TRACING_EVENTS_GPIO is not set

#
# Runtime Testing
#
CONFIG_LKDTM=y
CONFIG_TEST_LIST_SORT=y
# CONFIG_TEST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
CONFIG_TEST_HEXDUMP=y
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
# CONFIG_TEST_PRINTF is not set
CONFIG_TEST_BITMAP=m
CONFIG_TEST_UUID=m
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=m
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
CONFIG_MEMTEST=y
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN_NULL is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_X86_PTDUMP_CORE=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_WX=y
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_ENTRY is not set
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_PAGESPAN=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENABLED=y
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_TEMPLATE=y
# CONFIG_IMA_NG_TEMPLATE is not set
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_CHACHA20=m
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=m
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 3755 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='trinity'
	export testcase='trinity'
	export runtime=300
	export rootfs='yocto-tiny-i386-2016-04-22.cgz'
	export job_origin='/lkp/lkp/src/allot/rand/vm-lkp-nhm-dp1-yocto-ia32/trinity.yaml'
	export testbox='vm-lkp-nhm-dp1-yocto-ia32-2'
	export tbox_group='vm-lkp-nhm-dp1-yocto-ia32'
	export kconfig='i386-randconfig-a0-201714'
	export compiler='gcc-6'
	export queue='bisect'
	export branch='linux-devel/devel-catchup-201704051250'
	export commit='c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e'
	export submit_id='58e74f9f0b9a93db2d399aac'
	export job_file='/lkp/scheduled/vm-lkp-nhm-dp1-yocto-ia32-2/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e-20170407-56109-1oi138e-0.yaml'
	export id='d4bc1fe112fe7ffb86f864b0c0d3fbc77c38841c'
	export model='qemu-system-x86_64 -enable-kvm'
	export nr_vm=10
	export nr_cpu=2
	export memory='420M'
	export need_kconfig='CONFIG_KVM_GUEST=y'
	export enqueue_time='2017-04-07 16:36:48 +0800'
	export _id='58e74f9f0b9a93db2d399aac'
	export user='lkp'
	export result_root='/result/trinity/300s/vm-lkp-nhm-dp1-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/0'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/yocto/yocto-tiny-i386-2016-04-22.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/vm-lkp-nhm-dp1-yocto-ia32-2/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e-20170407-56109-1oi138e-0.yaml
ARCH=i386
kconfig=i386-randconfig-a0-201714
branch=linux-devel/devel-catchup-201704051250
commit=c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e
BOOT_IMAGE=/pkg/linux/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/vmlinuz-4.11.0-rc4-00065-gc1f943e
max_uptime=1500
RESULT_ROOT=/result/trinity/300s/vm-lkp-nhm-dp1-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-i386.cgz'
	export modules_initrd='/pkg/linux/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig.i386_2016-09-03.cgz,/osimage/pkg/static/trinity-i386.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export kernel='/pkg/linux/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/vmlinuz-4.11.0-rc4-00065-gc1f943e'
	export dequeue_time='2017-04-07 16:55:32 +0800'
	export job_initrd='/lkp/scheduled/vm-lkp-nhm-dp1-yocto-ia32-2/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e-20170407-56109-1oi138e-0.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	run_test $LKP_SRC/tests/wrapper trinity
}

extract_stats()
{
	$LKP_SRC/stats/wrapper kmsg

	$LKP_SRC/stats/wrapper time trinity.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 6352 bytes --]

[lkp-robot] [kernel] c1f943ee40: kernel_BUG_at_kernel/smpboot.c

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3906 bytes --]


FYI, we noticed the following commit:

commit: c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e ("kernel: sched: Provide a pointer to the valid CPU mask")
url: https://github.com/0day-ci/linux/commits/Sebastian-Andrzej-Siewior/kernel-sched-Provide-a-pointer-to-the-valid-CPU-mask/20170405-093637


in testcase: trinity
with following parameters:

	runtime: 300s

test-description: Trinity is a linux system call fuzz tester.
test-url: http://codemonkey.org.uk/projects/trinity/


on test machine: qemu-system-x86_64 -enable-kvm -smp 2 -m 420M

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+------------------------------------------+------------+------------+
|                                          | 89970a04d7 | c1f943ee40 |
+------------------------------------------+------------+------------+
| boot_successes                           | 12         | 2          |
| boot_failures                            | 0          | 10         |
| kernel_BUG_at_kernel/smpboot.c           | 0          | 10         |
| invalid_opcode:#[##]                     | 0          | 10         |
| EIP:smpboot_thread_fn                    | 0          | 10         |
| Kernel_panic-not_syncing:Fatal_exception | 0          | 10         |
+------------------------------------------+------------+------------+



[    0.302283] kernel BUG at kernel/smpboot.c:137!
[    0.302283] kernel BUG at kernel/smpboot.c:137!
[    0.304242] invalid opcode: 0000 [#1] PREEMPT SMP
[    0.304242] invalid opcode: 0000 [#1] PREEMPT SMP
[    0.306065] Modules linked in:
[    0.306065] Modules linked in:
[    0.307436] CPU: 0 PID: 14 Comm: cpuhp/1 Not tainted 4.11.0-rc4-00065-gc1f943e #74
[    0.307436] CPU: 0 PID: 14 Comm: cpuhp/1 Not tainted 4.11.0-rc4-00065-gc1f943e #74
[    0.310000] task: 57520000 task.stack: 5751a000
[    0.310000] task: 57520000 task.stack: 5751a000
[    0.310000] EIP: smpboot_thread_fn+0x380/0x3e0
[    0.310000] EIP: smpboot_thread_fn+0x380/0x3e0
[    0.310000] EFLAGS: 00210202 CPU: 0
[    0.310000] EFLAGS: 00210202 CPU: 0
[    0.310000] EAX: 587bd950 EBX: 57520000 ECX: 00000000 EDX: 00000001
[    0.310000] EAX: 587bd950 EBX: 57520000 ECX: 00000000 EDX: 00000001
[    0.310000] ESI: 00000000 EDI: 00000001 EBP: 5751bf80 ESP: 5751bf64
[    0.310000] ESI: 00000000 EDI: 00000001 EBP: 5751bf80 ESP: 5751bf64
[    0.310000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.310000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.310000] CR0: 80050033 CR2: ffffffff CR3: 189fa000 CR4: 00000690
[    0.310000] CR0: 80050033 CR2: ffffffff CR3: 189fa000 CR4: 00000690
[    0.310000] Call Trace:
[    0.310000] Call Trace:
[    0.310000]  kthread+0xdf/0x110
[    0.310000]  kthread+0xdf/0x110
[    0.310000]  ? sort_range+0x30/0x30
[    0.310000]  ? sort_range+0x30/0x30
[    0.310000]  ? kthread_create_on_node+0x30/0x30
[    0.310000]  ? kthread_create_on_node+0x30/0x30
[    0.310000]  ret_from_fork+0x21/0x30
[    0.310000]  ret_from_fork+0x21/0x30
[    0.310000] Code: 8b 50 04 85 d2 74 10 8b 00 31 d2 0f a3 05 50 dc 81 58 0f 92 c2 ff d1 8b 45 ec e8 bc 67 17 00 83 c4 10 31 c0 5b 5e 5f 5d c3 66 90 <0f> 0b 8d b6 00 00 00 00 b8 01 00 00 00 e8 3e 41 00 00 e8 a9 de
[    0.310000] Code: 8b 50 04 85 d2 74 10 8b 00 31 d2 0f a3 05 50 dc 81 58 0f 92 c2 ff d1 8b 45 ec e8 bc 67 17 00 83 c4 10 31 c0 5b 5e 5f 5d c3 66 90 <0f> 0b 8d b6 00 00 00 00 b8 01 00 00 00 e8 3e 41 00 00 e8 a9 de
[    0.310000] EIP: smpboot_thread_fn+0x380/0x3e0 SS:ESP: 0068:5751bf64
[    0.310000] EIP: smpboot_thread_fn+0x380/0x3e0 SS:ESP: 0068:5751bf64
[    0.310013] ---[ end trace b192179aeb6bf756 ]---


To reproduce:

        git clone https://github.com/01org/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script  # job-script is attached in this email



Thanks,
Xiaolong

[-- Attachment #2: config-4.11.0-rc4-00065-gc1f943e --]
[-- Type: text/plain, Size: 112555 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.11.0-rc4 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_MEMCG_SWAP is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
# CONFIG_SOCK_CGROUP_DATA is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_POSIX_TIMERS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_MEMCG_SYSFS_ON=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
CONFIG_GCC_PLUGIN_CYC_COMPLEXITY=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_TRIM_UNUSED_KSYMS=y
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_ZONED=y
# CONFIG_BLK_CMDLINE_PARSER is not set
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_SQ is not set
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_MQ_IOSCHED_DEADLINE=m
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_FAST_FEATURE_TESTS is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT_A is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=m
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
# CONFIG_STA2X11 is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
CONFIG_MVIAC3_2=y
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
CONFIG_PERF_EVENTS_AMD_POWER=y
CONFIG_X86_LEGACY_VM86=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_1G=y
CONFIG_PAGE_OFFSET=0x40000000
CONFIG_HIGHMEM=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=m
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=m
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_FRAME_VECTOR=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
CONFIG_X86_INTEL_MPX=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_SFI=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOOLPC=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_PCIEASPM_DEFAULT is not set
CONFIG_PCIEASPM_POWERSAVE=y
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_PLAT=y

#
# PCI host controller drivers
#
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
# CONFIG_EISA_PCI_EISA is not set
CONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
CONFIG_SCx200=y
# CONFIG_SCx200HR_TIMER is not set
CONFIG_OLPC=y
# CONFIG_OLPC_XO1_PM is not set
# CONFIG_OLPC_XO15_SCI is not set
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_GRO_CELLS is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# CONFIG_DMA_CMA is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
CONFIG_VIRTIO_BLK_SCSI=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=m
CONFIG_BLK_DEV_NVME_SCSI=y
CONFIG_NVME_FABRICS=y
# CONFIG_NVME_FC is not set
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_FC=m

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=m
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=m
CONFIG_SRAM=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_LEGACY=y
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_IDE_GD is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
# CONFIG_BLK_DEV_CS5536 is not set
CONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=m
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not set
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_TC86C001=y

#
# Other IDE chipsets support
#

#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=m
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=y
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
# CONFIG_SCSI_MVUMI is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_SMARTPQI=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_UFS_DWC_TC_PCI=y
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_SCSI_SNIC=m
CONFIG_SCSI_SNIC_DEBUG_FS=y
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_ISCI=y
CONFIG_SCSI_GENERIC_NCR5380=y
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_NCR53C406A=y
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_FAS=m
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_SIM710=y
CONFIG_SCSI_SYM53C416=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_NSP32=y
CONFIG_SCSI_WD719X=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_AHCI_CEVA=m
# CONFIG_AHCI_QORIQ is not set
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_MQ_DEFAULT=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
CONFIG_DM_ERA=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
# CONFIG_TCM_PSCSI is not set
# CONFIG_TCM_USER2 is not set
# CONFIG_LOOPBACK_TARGET is not set
# CONFIG_ISCSI_TARGET is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
CONFIG_NVM=y
CONFIG_NVM_DEBUG=y
CONFIG_NVM_RRPC=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_OLPC is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=y
# CONFIG_NOZOMI is not set
CONFIG_ISI=y
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=m
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
# CONFIG_SERIAL_8250_ACCENT is not set
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=y
CONFIG_SERIAL_8250_HUB6=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=m
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_MOXA=m
# CONFIG_SERIAL_OF_PLATFORM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=m
# CONFIG_SERIAL_SC16IS7XX is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_PCH_UART=m
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
CONFIG_SERIAL_MEN_Z135=m
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
CONFIG_TTY_PRINTK=m
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_DTLK=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_MWAVE=y
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_CRB is not set
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=m
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EG20T=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_PCI=y
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
# CONFIG_I2C_DLN2 is not set
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_CROS_EC_TUNNEL is not set
CONFIG_SCx200_ACB=y
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=m

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
CONFIG_GPIO_ICH=y
# CONFIG_GPIO_LYNXPOINT is not set
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_MOCKUP=m
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XILINX is not set

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=m
CONFIG_GPIO_104_IDIO_16=y
# CONFIG_GPIO_104_IDI_48 is not set
CONFIG_GPIO_F7188X=m
# CONFIG_GPIO_GPIO_MM is not set
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WS16C48 is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_CS5535=m
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
# CONFIG_GPIO_JANZ_TTL is not set
CONFIG_GPIO_KEMPLD=m
# CONFIG_GPIO_LP3943 is not set
CONFIG_GPIO_LP873X=m
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TC3589X=y
# CONFIG_GPIO_TIMBERDALE is not set
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS65912=m
# CONFIG_GPIO_WHISKEY_COVE is not set
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=m

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=m
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_ML_IOH=m
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
CONFIG_GPIO_RDC321X=y
# CONFIG_GPIO_SODAVILLE is not set

#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=y

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# CONFIG_W1 is not set
CONFIG_POWER_AVS=y
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_BATTERY_ACT8945A is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_OLPC is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_DA9150 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_MAX14577 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77693 is not set
# CONFIG_CHARGER_MAX8998 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_DELL_SMM is not set
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_I5500=m
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2990=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
# CONFIG_SENSORS_PMBUS is not set
# CONFIG_SENSORS_ADM1275 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX20751=m
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS1015=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
CONFIG_SENSORS_TC74=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM8350 is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
CONFIG_INTEL_SOC_DTS_THERMAL=m

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_BXT_PMIC_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_GENERIC_ADC_THERMAL=m
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
CONFIG_BCMA_HOST_SOC=y
# CONFIG_BCMA_DRIVER_PCI is not set
CONFIG_BCMA_SFLASH=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=m
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=m
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_CROS_EC=m
# CONFIG_MFD_CROS_EC_I2C is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=m
CONFIG_MFD_DLN2=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_HI6421_PMIC=m
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=m
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=y
CONFIG_MFD_RTSX_USB=m
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SMSC=y
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=m
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_88PM8607=m
CONFIG_REGULATOR_ACT8865=m
# CONFIG_REGULATOR_ACT8945A is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=m
# CONFIG_REGULATOR_AS3711 is not set
CONFIG_REGULATOR_AS3722=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=m
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP873X=m
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=m
# CONFIG_REGULATOR_MAX14577 is not set
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_PALMAS=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=m
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
CONFIG_REGULATOR_RK808=m
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_TPS51632=m
# CONFIG_REGULATOR_TPS6105X is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=m
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65218=m
CONFIG_REGULATOR_TPS65912=m
# CONFIG_REGULATOR_WM8350 is not set
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_WM8994=y
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CEC_DEBUG=y
CONFIG_MEDIA_CEC_EDID=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_VIDEO_PCI_SKELETON is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=16
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
# CONFIG_USB_STV06XX is not set
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
# CONFIG_USB_GSPCA_MR97310A is not set
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
# CONFIG_USB_GSPCA_SQ905 is not set
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
# CONFIG_USB_GSPCA_T613 is not set
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
# CONFIG_USB_GSPCA_TV8532 is not set
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_USB_PWC is not set
CONFIG_VIDEO_CPIA2=m
# CONFIG_USB_ZR364XX is not set
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set

#
# Analog/digital TV USB devices
#
# CONFIG_VIDEO_AU0828 is not set

#
# Digital TV USB devices
#
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
# CONFIG_DVB_USB_ANYSEE is not set
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
# CONFIG_DVB_USB_CE6230 is not set
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_MXL111SF=m
# CONFIG_DVB_USB_RTL28XXU is not set
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_TTUSB_BUDGET=m
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_USB_DRV is not set
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
# CONFIG_VIDEO_EM28XX_DVB is not set

#
# Software defined radio USB devices
#
# CONFIG_USB_AIRSPY is not set
# CONFIG_USB_HACKRF is not set

#
# USB HDMI CEC adapters
#
# CONFIG_USB_PULSE8_CEC is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
CONFIG_VIDEO_TW5864=m
# CONFIG_VIDEO_TW68 is not set
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
# CONFIG_VIDEO_ZORAN_BUZ is not set
CONFIG_VIDEO_ZORAN_DC10=m
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZORAN_LML33R10 is not set
CONFIG_VIDEO_ZORAN_AVS6EYES=m

#
# Media capture/analog TV support
#
CONFIG_VIDEO_HEXIUM_GEMINI=m
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
CONFIG_VIDEO_DT3155=m

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_ADV7175=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_TS2020=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_CX22700=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
CONFIG_DVB_ZD1301_DEMOD=m
# CONFIG_DVB_GP8PSK_FE is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_SP2=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_LIB_RANDOM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=m
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=m
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
# CONFIG_FB_GEODE_GX is not set
# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=m
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=m
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_MAX8925=m
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_PM8941_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_OT200=m
CONFIG_BACKLIGHT_SKY81452=y
# CONFIG_BACKLIGHT_AS3711 is not set
CONFIG_BACKLIGHT_GPIO=y
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=m
CONFIG_VGASTATE=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_OTG_FSM=y
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=m
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=m
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=m
CONFIG_USB_HCD_TEST_MODE=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=y
# CONFIG_REALTEK_AUTOPM is not set
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
# CONFIG_USB_STORAGE_SDDR09 is not set
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=m
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=m
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#

#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_HOST=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
# CONFIG_USB_DWC3_OF_SIMPLE is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PCI is not set
CONFIG_USB_DWC2_DEBUG=y
# CONFIG_USB_DWC2_VERBOSE is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_DWC2_DEBUG_PERIODIC=y
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_OF=m
CONFIG_USB_CHIPIDEA_PCI=m
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_CHIPIDEA_ULPI is not set
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_BELKIN is not set
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_F8153X=m
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
CONFIG_USB_SERIAL_WISHBONE=m
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=y
# CONFIG_USB_HSIC_USB4604 is not set
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_UCSI is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
CONFIG_USB_ISP1301=y
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
CONFIG_USB_FOTG210_UDC=m
CONFIG_USB_GR_UDC=m
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
CONFIG_USB_MV_U3D=m
CONFIG_USB_M66592=m
# CONFIG_USB_BDC_UDC is not set
CONFIG_USB_AMD5536UDC=m
CONFIG_USB_NET2272=m
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GOKU is not set
CONFIG_USB_EG20T=m
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_F_TCM=m
CONFIG_USB_CONFIGFS=m
# CONFIG_USB_CONFIGFS_SERIAL is not set
CONFIG_USB_CONFIGFS_ACM=y
# CONFIG_USB_CONFIGFS_OBEX is not set
# CONFIG_USB_CONFIGFS_NCM is not set
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
# CONFIG_USB_CONFIGFS_RNDIS is not set
# CONFIG_USB_CONFIGFS_EEM is not set
# CONFIG_USB_CONFIGFS_MASS_STORAGE is not set
CONFIG_USB_CONFIGFS_F_LB_SS=y
# CONFIG_USB_CONFIGFS_F_FS is not set
# CONFIG_USB_CONFIGFS_F_HID is not set
# CONFIG_USB_CONFIGFS_F_UVC is not set
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
# CONFIG_USB_FUNCTIONFS_ETH is not set
# CONFIG_USB_FUNCTIONFS_RNDIS is not set
CONFIG_USB_FUNCTIONFS_GENERIC=y
# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_GADGET_TARGET=m
# CONFIG_USB_G_SERIAL is not set
CONFIG_USB_G_PRINTER=m
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
# CONFIG_USB_G_WEBCAM is not set
CONFIG_USB_ULPI_BUS=m
CONFIG_UWB=y
CONFIG_UWB_HWA=m
# CONFIG_UWB_WHCI is not set
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_PWRSEQ_EMMC=m
# CONFIG_PWRSEQ_SIMPLE is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_OF_ARASAN is not set
CONFIG_MMC_SDHCI_OF_AT91=m
# CONFIG_MMC_SDHCI_CADENCE is not set
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
# CONFIG_MMC_REALTEK_USB is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
CONFIG_MMC_MTK=m
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_BCM6328 is not set
CONFIG_LEDS_BCM6358=m
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3533=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA9052=m
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=y
# CONFIG_LEDS_MENF21BMC is not set
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_USER=m
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
# CONFIG_EDAC_I82875P is not set
CONFIG_EDAC_I82975X=m
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I82860 is not set
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=m
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_AS3722=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_MAX8907 is not set
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV8803=m
CONFIG_RTC_DRV_S5M=y

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=y

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
CONFIG_RTC_DRV_DS17885=y
# CONFIG_RTC_DS1685_PROC_REGS is not set
# CONFIG_RTC_DS1685_SYSFS_REGS is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=m
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_WM8350 is not set
CONFIG_RTC_DRV_PCF50633=m
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SNVS is not set
CONFIG_RTC_DRV_R7301=y

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_FSL_EDMA=m
CONFIG_INTEL_IDMA64=y
CONFIG_PCH_DMA=m
CONFIG_TIMB_DMA=m
CONFIG_QCOM_HIDMA_MGMT=m
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=m
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=m

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_COMEDI is not set
# CONFIG_FB_OLPC_DCON is not set
CONFIG_RTS5208=y

#
# IIO staging drivers
#

#
# Accelerometers
#

#
# Analog to digital converters
#
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_I2C=m

#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7152=m
CONFIG_AD7746=m

#
# Direct Digital Synthesis
#

#
# Digital gyroscope sensors
#

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m

#
# Light sensors
#
CONFIG_SENSORS_ISL29028=m
CONFIG_TSL2x7x=m

#
# Active energy metering IC
#
CONFIG_ADE7854=m
# CONFIG_ADE7854_I2C is not set

#
# Resolver to digital converters
#

#
# Triggers - standalone
#
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
CONFIG_STAGING_MEDIA=y
CONFIG_DVB_CXD2099=m

#
# Android
#
# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
# CONFIG_ION is not set
CONFIG_STAGING_BOARD=y
# CONFIG_LTE_GDM724X is not set
CONFIG_DGNC=y
# CONFIG_GS_FPGABOOT is not set
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_MOST=y
CONFIG_MOSTCORE=y
# CONFIG_AIM_CDEV is not set
# CONFIG_AIM_NETWORK is not set
CONFIG_AIM_V4L2=m
CONFIG_HDM_I2C=m
# CONFIG_HDM_USB is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
CONFIG_INTEL_PMC_CORE=y
CONFIG_IBM_RTL=m
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=m
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_INTEL_PUNIT_IPC=y
# CONFIG_MLX_CPLD_PLATFORM is not set
CONFIG_PMC_ATOM=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_PSTORE=m
# CONFIG_CROS_EC_CHARDEV is not set
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_RK808 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_CDCE706=m
CONFIG_COMMON_CLK_CDCE925=m
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=m
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PALMAS=m
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_COMMON_CLK_VC5 is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=m
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=m
# CONFIG_MAILBOX_TEST is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_SOC_ZTE is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=m
CONFIG_DEVFREQ_GOV_USERSPACE=m
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=m

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_INTEL_INT3496 is not set
# CONFIG_EXTCON_MAX14577 is not set
CONFIG_EXTCON_MAX3355=m
# CONFIG_EXTCON_MAX77693 is not set
CONFIG_EXTCON_MAX77843=m
# CONFIG_EXTCON_PALMAS is not set
CONFIG_EXTCON_QCOM_SPMI_MISC=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_MEMORY=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
CONFIG_IIO_SW_TRIGGER=m

#
# Accelerometers
#
CONFIG_BMA180=m
# CONFIG_BMC150_ACCEL is not set
CONFIG_DA280=m
# CONFIG_DA311 is not set
CONFIG_DMARD06=m
CONFIG_DMARD09=m
CONFIG_DMARD10=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
# CONFIG_MMA7660 is not set
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m

#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
# CONFIG_AD799X is not set
# CONFIG_CC10001_ADC is not set
# CONFIG_DA9150_GPADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HX711=m
# CONFIG_INA2XX_ADC is not set
# CONFIG_LTC2485 is not set
CONFIG_MAX1363=m
CONFIG_MCP3422=m
CONFIG_MEN_Z188_ADC=m
CONFIG_NAU7802=m
# CONFIG_PALMAS_GPADC is not set
# CONFIG_STX104 is not set
# CONFIG_TI_ADC081C is not set
CONFIG_TI_ADS1015=m
CONFIG_TI_AM335X_ADC=m
CONFIG_VF610_ADC=m
CONFIG_VIPERBOARD_ADC=m

#
# Amplifiers
#

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
CONFIG_IAQCORE=m
# CONFIG_VZ89X is not set
# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set

#
# Hid Sensor IIO Common
#
CONFIG_IIO_MS_SENSORS_I2C=m

#
# SSP Sensor Common
#
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Counters
#
# CONFIG_104_QUAD_8 is not set

#
# Digital to analog converters
#
CONFIG_AD5064=m
# CONFIG_AD5380 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5593R is not set
# CONFIG_CIO_DAC is not set
CONFIG_DPOT_DAC=m
CONFIG_M62332=m
# CONFIG_MAX517 is not set
CONFIG_MAX5821=m
CONFIG_MCP4725=m
CONFIG_VF610_DAC=m

#
# IIO dummy driver
#

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#

#
# Phase-Locked Loop (PLL) frequency synthesizers
#

#
# Digital gyroscope sensors
#
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set

#
# Humidity sensors
#
CONFIG_AM2315=m
CONFIG_DHT11=m
CONFIG_HDC100X=m
# CONFIG_HTS221 is not set
# CONFIG_HTU21 is not set
CONFIG_SI7005=m
CONFIG_SI7020=m

#
# Inertial measurement units
#
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_KMX61=m
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
# CONFIG_ADJD_S311 is not set
CONFIG_AL3320A=m
CONFIG_APDS9300=m
# CONFIG_APDS9960 is not set
CONFIG_BH1750=m
# CONFIG_BH1780 is not set
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
CONFIG_CM3605=m
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=m
CONFIG_SENSORS_ISL29018=m
CONFIG_ISL29125=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
# CONFIG_LTR501 is not set
# CONFIG_MAX44000 is not set
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
CONFIG_TSL4531=m
# CONFIG_US5182D is not set
CONFIG_VCNL4000=m
CONFIG_VEML6070=m

#
# Magnetometer sensors
#
CONFIG_AK8974=m
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_MAG3110=m
CONFIG_MMC35240=m
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m

#
# Inclinometer sensors
#

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
# CONFIG_IIO_SYSFS_TRIGGER is not set

#
# Digital potentiometers
#
CONFIG_DS1803=m
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=m

#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set

#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_HP03=m
# CONFIG_MPL115_I2C is not set
CONFIG_MPL3115=m
CONFIG_MS5611=m
# CONFIG_MS5611_I2C is not set
CONFIG_MS5637=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_T5403=m
CONFIG_HP206C=m
# CONFIG_ZPA2326 is not set

#
# Lightning sensors
#

#
# Proximity and distance sensors
#
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set

#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
CONFIG_TMP006=m
CONFIG_TMP007=m
CONFIG_TSYS01=m
# CONFIG_TSYS02D is not set
CONFIG_NTB=m
# CONFIG_NTB_PINGPONG is not set
CONFIG_NTB_TOOL=m
# CONFIG_NTB_PERF is not set
CONFIG_NTB_TRANSPORT=m
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
# CONFIG_VME_CA91CX42 is not set
CONFIG_VME_TSI148=m
# CONFIG_VME_FAKE is not set

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y

#
# VME Device Drivers
#
CONFIG_VME_USER=m
CONFIG_VME_PIO2=m
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_CRC=y
CONFIG_PWM_CROS_EC=m
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=m
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_TI_SYSCON_RESET=m
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_EXYNOS4210_USB2 is not set
# CONFIG_PHY_EXYNOS4X12_USB2 is not set
# CONFIG_PHY_EXYNOS5250_USB2 is not set
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_TUSB1210=m
# CONFIG_POWERCAP is not set
CONFIG_MCB=m
CONFIG_MCB_PCI=m
CONFIG_MCB_LPC=m

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
CONFIG_DEV_DAX=y
CONFIG_NR_DEV_DAX=32768
CONFIG_NVMEM=y
CONFIG_STM=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
# CONFIG_STM_SOURCE_FTRACE is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# FSI support
#
# CONFIG_FSI is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
CONFIG_BTRFS_ASSERT=y
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
CONFIG_F2FS_IO_TRACE=y
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_PERF_TEST=m
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BRANCH_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_MMIOTRACE_TEST is not set
CONFIG_TRACEPOINT_BENCHMARK=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
CONFIG_TRACE_ENUM_MAP_FILE=y
# CONFIG_TRACING_EVENTS_GPIO is not set

#
# Runtime Testing
#
CONFIG_LKDTM=y
CONFIG_TEST_LIST_SORT=y
# CONFIG_TEST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
CONFIG_TEST_HEXDUMP=y
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=m
# CONFIG_TEST_PRINTF is not set
CONFIG_TEST_BITMAP=m
CONFIG_TEST_UUID=m
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=m
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
CONFIG_MEMTEST=y
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN_NULL is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_X86_PTDUMP_CORE=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_WX=y
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_ENTRY is not set
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_PAGESPAN=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENABLED=y
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_TEMPLATE=y
# CONFIG_IMA_NG_TEMPLATE is not set
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_CHACHA20=m
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=m
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y

[-- Attachment #3: job-script.ksh --]
[-- Type: text/plain, Size: 3755 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='trinity'
	export testcase='trinity'
	export runtime=300
	export rootfs='yocto-tiny-i386-2016-04-22.cgz'
	export job_origin='/lkp/lkp/src/allot/rand/vm-lkp-nhm-dp1-yocto-ia32/trinity.yaml'
	export testbox='vm-lkp-nhm-dp1-yocto-ia32-2'
	export tbox_group='vm-lkp-nhm-dp1-yocto-ia32'
	export kconfig='i386-randconfig-a0-201714'
	export compiler='gcc-6'
	export queue='bisect'
	export branch='linux-devel/devel-catchup-201704051250'
	export commit='c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e'
	export submit_id='58e74f9f0b9a93db2d399aac'
	export job_file='/lkp/scheduled/vm-lkp-nhm-dp1-yocto-ia32-2/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e-20170407-56109-1oi138e-0.yaml'
	export id='d4bc1fe112fe7ffb86f864b0c0d3fbc77c38841c'
	export model='qemu-system-x86_64 -enable-kvm'
	export nr_vm=10
	export nr_cpu=2
	export memory='420M'
	export need_kconfig='CONFIG_KVM_GUEST=y'
	export enqueue_time='2017-04-07 16:36:48 +0800'
	export _id='58e74f9f0b9a93db2d399aac'
	export user='lkp'
	export result_root='/result/trinity/300s/vm-lkp-nhm-dp1-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/0'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/yocto/yocto-tiny-i386-2016-04-22.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/vm-lkp-nhm-dp1-yocto-ia32-2/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e-20170407-56109-1oi138e-0.yaml
ARCH=i386
kconfig=i386-randconfig-a0-201714
branch=linux-devel/devel-catchup-201704051250
commit=c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e
BOOT_IMAGE=/pkg/linux/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/vmlinuz-4.11.0-rc4-00065-gc1f943e
max_uptime=1500
RESULT_ROOT=/result/trinity/300s/vm-lkp-nhm-dp1-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-i386.cgz'
	export modules_initrd='/pkg/linux/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig.i386_2016-09-03.cgz,/osimage/pkg/static/trinity-i386.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export kernel='/pkg/linux/i386-randconfig-a0-201714/gcc-6/c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e/vmlinuz-4.11.0-rc4-00065-gc1f943e'
	export dequeue_time='2017-04-07 16:55:32 +0800'
	export job_initrd='/lkp/scheduled/vm-lkp-nhm-dp1-yocto-ia32-2/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-c1f943ee4029d96b2841eb9a1bcec4b3dab6c67e-20170407-56109-1oi138e-0.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog
	run_monitor $LKP_SRC/monitors/wrapper nfs-hang

	run_test $LKP_SRC/tests/wrapper trinity
}

extract_stats()
{
	$LKP_SRC/stats/wrapper kmsg

	$LKP_SRC/stats/wrapper time trinity.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 6352 bytes --]