From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754460AbdDFIkt (ORCPT ); Thu, 6 Apr 2017 04:40:49 -0400 Received: from mail.linuxfoundation.org ([140.211.169.12]:50970 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752692AbdDFIk0 (ORCPT ); Thu, 6 Apr 2017 04:40:26 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, James Bottomley , Sreekanth Reddy , Christoph Hellwig , Ingo Molnar , "Martin K. Petersen" , Joe Korty Subject: [PATCH 4.4 03/26] scsi: mpt3sas: fix hang on ata passthrough commands Date: Thu, 6 Apr 2017 10:38:25 +0200 Message-Id: <20170406083604.523033119@linuxfoundation.org> X-Mailer: git-send-email 2.12.2 In-Reply-To: <20170406083604.362636628@linuxfoundation.org> References: <20170406083604.362636628@linuxfoundation.org> User-Agent: quilt/0.65 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 4.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: James Bottomley commit ffb58456589443ca572221fabbdef3db8483a779 upstream. mpt3sas has a firmware failure where it can only handle one pass through ATA command at a time. If another comes in, contrary to the SAT standard, it will hang until the first one completes (causing long commands like secure erase to timeout). The original fix was to block the device when an ATA command came in, but this caused a regression with commit 669f044170d8933c3d66d231b69ea97cb8447338 Author: Bart Van Assche Date: Tue Nov 22 16:17:13 2016 -0800 scsi: srp_transport: Move queuecommand() wait code to SCSI core So fix the original fix of the secure erase timeout by properly returning SAM_STAT_BUSY like the SAT recommends. The original patch also had a concurrency problem since scsih_qcmd is lockless at that point (this is fixed by using atomic bitops to set and test the flag). [mkp: addressed feedback wrt. test_bit and fixed whitespace] Fixes: 18f6084a989ba1b (mpt3sas: Fix secure erase premature termination) Signed-off-by: James Bottomley Acked-by: Sreekanth Reddy Reviewed-by: Christoph Hellwig Reported-by: Ingo Molnar Tested-by: Ingo Molnar Signed-off-by: Martin K. Petersen Cc: Joe Korty Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/mpt3sas/mpt3sas_base.h | 12 ++++++++++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 40 ++++++++++++++++++++++------------- 2 files changed, 38 insertions(+), 14 deletions(-) --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -390,6 +390,7 @@ struct MPT3SAS_TARGET { * @eedp_enable: eedp support enable bit * @eedp_type: 0(type_1), 1(type_2), 2(type_3) * @eedp_block_length: block size + * @ata_command_pending: SATL passthrough outstanding for device */ struct MPT3SAS_DEVICE { struct MPT3SAS_TARGET *sas_target; @@ -398,6 +399,17 @@ struct MPT3SAS_DEVICE { u8 configured_lun; u8 block; u8 tlr_snoop_check; + /* + * Bug workaround for SATL handling: the mpt2/3sas firmware + * doesn't return BUSY or TASK_SET_FULL for subsequent + * commands while a SATL pass through is in operation as the + * spec requires, it simply does nothing with them until the + * pass through completes, causing them possibly to timeout if + * the passthrough is a long executing command (like format or + * secure erase). This variable allows us to do the right + * thing while a SATL command is pending. + */ + unsigned long ata_command_pending; }; #define MPT3_CMD_NOT_USED 0x8000 /* free */ --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3707,9 +3707,18 @@ _scsih_temp_threshold_events(struct MPT3 } } -static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +static int _scsih_set_satl_pending(struct scsi_cmnd *scmd, bool pending) { - return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); + struct MPT3SAS_DEVICE *priv = scmd->device->hostdata; + + if (scmd->cmnd[0] != ATA_12 && scmd->cmnd[0] != ATA_16) + return 0; + + if (pending) + return test_and_set_bit(0, &priv->ata_command_pending); + + clear_bit(0, &priv->ata_command_pending); + return 0; } /** @@ -3733,9 +3742,7 @@ _scsih_flush_running_cmds(struct MPT3SAS if (!scmd) continue; count++; - if (ata_12_16_cmd(scmd)) - scsi_internal_device_unblock(scmd->device, - SDEV_RUNNING); + _scsih_set_satl_pending(scmd, false); mpt3sas_base_free_smid(ioc, smid); scsi_dma_unmap(scmd); if (ioc->pci_error_recovery) @@ -3866,13 +3873,6 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (ioc->logging_level & MPT_DEBUG_SCSI) scsi_print_command(scmd); - /* - * Lock the device for any subsequent command until command is - * done. - */ - if (ata_12_16_cmd(scmd)) - scsi_internal_device_block(scmd->device); - sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -3886,6 +3886,19 @@ scsih_qcmd(struct Scsi_Host *shost, stru return 0; } + /* + * Bug work around for firmware SATL handling. The loop + * is based on atomic operations and ensures consistency + * since we're lockless at this point + */ + do { + if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { + scmd->result = SAM_STAT_BUSY; + scmd->scsi_done(scmd); + return 0; + } + } while (_scsih_set_satl_pending(scmd, true)); + sas_target_priv_data = sas_device_priv_data->sas_target; /* invalid device handle */ @@ -4445,8 +4458,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *i if (scmd == NULL) return 1; - if (ata_12_16_cmd(scmd)) - scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + _scsih_set_satl_pending(scmd, false); mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);