All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wenyou Yang <wenyou.yang@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 1/3] configs: at91sam9n12ek: Update for DT and DM support
Date: Wed, 12 Apr 2017 17:08:13 +0800	[thread overview]
Message-ID: <20170412090815.19944-2-wenyou.yang@atmel.com> (raw)
In-Reply-To: <20170412090815.19944-1-wenyou.yang@atmel.com>

Update the configuration files to support the device tree and driver
model. The device clock and pins configuration are handled by the
clock and the pinctrl drivers respectively.

Because the limitation of internal SRAM size, the SPL with driver
model can't be supported, disable the SPL option.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

Changes in v2:
 - Remain the SPI speed macros.
 - Disable the SPL option for the nand config.
 - Add support of Atmel uart be used in the board_init_f stage.
 - Improve the commit log.

 board/atmel/at91sam9n12ek/at91sam9n12ek.c |  2 ++
 configs/at91sam9n12ek_mmc_defconfig       | 19 ++++++++++++++++++-
 configs/at91sam9n12ek_nandflash_defconfig | 25 ++++++++++++++++++-------
 configs/at91sam9n12ek_spiflash_defconfig  | 26 ++++++++++++++++++--------
 include/configs/at91sam9n12ek.h           | 19 +------------------
 5 files changed, 57 insertions(+), 34 deletions(-)

diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
index 58da2d27f8..e3f9cbbe50 100644
--- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -133,6 +133,7 @@ void lcd_show_board_info(void)
 #endif /* CONFIG_LCD */
 
 /* SPI chip select control */
+#ifndef CONFIG_DM_SPI
 #ifdef CONFIG_ATMEL_SPI
 #include <spi.h>
 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
@@ -164,6 +165,7 @@ void spi_cs_deactivate(struct spi_slave *slave)
 	}
 }
 #endif /* CONFIG_ATMEL_SPI */
+#endif
 
 #ifdef CONFIG_GENERIC_ATMEL_MCI
 int board_mmc_init(bd_t *bd)
diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig
index ef9250bce9..abb07260be 100644
--- a/configs/at91sam9n12ek_mmc_defconfig
+++ b/configs/at91sam9n12ek_mmc_defconfig
@@ -1,6 +1,8 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_TARGET_AT91SAM9N12EK=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
@@ -19,9 +21,24 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig
index db88973d09..1b420e62b8 100644
--- a/configs/at91sam9n12ek_nandflash_defconfig
+++ b/configs/at91sam9n12ek_nandflash_defconfig
@@ -1,17 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_TARGET_AT91SAM9N12EK=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
@@ -25,9 +21,24 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig
index 4e5d10226e..9048b14de4 100644
--- a/configs/at91sam9n12ek_spiflash_defconfig
+++ b/configs/at91sam9n12ek_spiflash_defconfig
@@ -1,18 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_TARGET_AT91SAM9N12EK=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
@@ -26,9 +21,24 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 872d471d05..398c3fdce6 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -28,14 +28,6 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_SYS
-
 /* LCD */
 #define LCD_BPP				LCD_COLOR16
 #define LCD_OUTPUT_BPP			24
@@ -46,7 +38,6 @@
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
 
-
 /*
  * BOOTP options
  */
@@ -70,14 +61,11 @@
  * that address while providing maximum stack area below.
  */
 # define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
 #define CONFIG_SF_DEFAULT_SPEED		30000000
-#define CONFIG_ENV_SPI_MODE		SPI_MODE_3
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 #endif
 
 /* NAND flash */
@@ -116,11 +104,6 @@
 	"bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
 	"bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
 
-/* MMC */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
 /* Ethernet */
 #define CONFIG_KS8851_MLL
 #define CONFIG_KS8851_MLL_BASEADDR	0x30000000 /* use NCS2 */
-- 
2.11.0

  reply	other threads:[~2017-04-12  9:08 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-12  9:08 [U-Boot] [PATCH v2 0/3] board: at91sam9n12ek: Convert to support DM and DT Wenyou Yang
2017-04-12  9:08 ` Wenyou Yang [this message]
2017-04-16 19:31   ` [U-Boot] [PATCH v2 1/3] configs: at91sam9n12ek: Update for DT and DM support Simon Glass
2017-04-12  9:08 ` [U-Boot] [PATCH v2 2/3] board: at91sam9n12ek: Clean up code Wenyou Yang
2017-04-16 19:31   ` Simon Glass
2017-04-12  9:08 ` [U-Boot] [PATCH v2 3/3] board: at91sam9n12ek: Enable early debug UART Wenyou Yang
2017-04-16 19:31   ` Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170412090815.19944-2-wenyou.yang@atmel.com \
    --to=wenyou.yang@atmel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.