All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wenyou Yang <wenyou.yang@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 3/3] board: at91sam9260ek/9g20ek: Enable early debug UART
Date: Wed, 12 Apr 2017 17:14:26 +0800	[thread overview]
Message-ID: <20170412091426.21052-4-wenyou.yang@atmel.com> (raw)
In-Reply-To: <20170412091426.21052-1-wenyou.yang@atmel.com>

Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

Changes in v3:
 - Move out [PATCH 1/3] ARM: dts: at91: add dts file for at91sam9g20/at91sam9260.
 - Add [PATCH]: board: at91sam9260ek/9g20ek: Enable early debug UART.

Changes in v2: None

 board/atmel/at91sam9260ek/at91sam9260ek.c      | 13 +++++++++++++
 configs/at91sam9260ek_dataflash_cs0_defconfig  |  6 ++++++
 configs/at91sam9260ek_dataflash_cs1_defconfig  |  6 ++++++
 configs/at91sam9260ek_nandflash_defconfig      |  6 ++++++
 configs/at91sam9g20ek_2mmc_defconfig           |  6 ++++++
 configs/at91sam9g20ek_2mmc_nandflash_defconfig |  6 ++++++
 configs/at91sam9g20ek_dataflash_cs0_defconfig  |  6 ++++++
 configs/at91sam9g20ek_dataflash_cs1_defconfig  |  6 ++++++
 configs/at91sam9g20ek_nandflash_defconfig      |  6 ++++++
 configs/at91sam9xeek_dataflash_cs0_defconfig   |  6 ++++++
 configs/at91sam9xeek_dataflash_cs1_defconfig   |  6 ++++++
 configs/at91sam9xeek_nandflash_defconfig       |  6 ++++++
 12 files changed, 79 insertions(+)

diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index e28242f034..b087fce9b8 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -7,6 +7,7 @@
  */
 
 #include <common.h>
+#include <debug_uart.h>
 #include <asm/io.h>
 #include <asm/arch/at91sam9260_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
@@ -61,10 +62,22 @@ static void at91sam9260ek_nand_hw_init(void)
 }
 #endif
 
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+	at91_seriald_hw_init();
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
 int board_early_init_f(void)
 {
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
 	return 0;
 }
+#endif
 
 int board_init(void)
 {
diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig b/configs/at91sam9260ek_dataflash_cs0_defconfig
index 6d34e215ff..cc3f0a8b34 100644
--- a/configs/at91sam9260ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9260ek_dataflash_cs0_defconfig
@@ -31,6 +31,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/at91sam9260ek_dataflash_cs1_defconfig b/configs/at91sam9260ek_dataflash_cs1_defconfig
index 85f01f34d2..cb621dfb9f 100644
--- a/configs/at91sam9260ek_dataflash_cs1_defconfig
+++ b/configs/at91sam9260ek_dataflash_cs1_defconfig
@@ -31,6 +31,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig
index d9a7a48e88..20d3565377 100644
--- a/configs/at91sam9260ek_nandflash_defconfig
+++ b/configs/at91sam9260ek_nandflash_defconfig
@@ -31,6 +31,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig
index ef7bd402c7..18e88a7445 100644
--- a/configs/at91sam9g20ek_2mmc_defconfig
+++ b/configs/at91sam9g20ek_2mmc_defconfig
@@ -33,6 +33,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig
index 398be7e60a..fb0d87ab4b 100644
--- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig
+++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig
@@ -33,6 +33,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/at91sam9g20ek_dataflash_cs0_defconfig b/configs/at91sam9g20ek_dataflash_cs0_defconfig
index b8105738aa..27c1c10df1 100644
--- a/configs/at91sam9g20ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9g20ek_dataflash_cs0_defconfig
@@ -31,6 +31,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/at91sam9g20ek_dataflash_cs1_defconfig b/configs/at91sam9g20ek_dataflash_cs1_defconfig
index 18e2a17664..1826e6ca98 100644
--- a/configs/at91sam9g20ek_dataflash_cs1_defconfig
+++ b/configs/at91sam9g20ek_dataflash_cs1_defconfig
@@ -31,6 +31,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig
index daa41dcba7..1ac88631bc 100644
--- a/configs/at91sam9g20ek_nandflash_defconfig
+++ b/configs/at91sam9g20ek_nandflash_defconfig
@@ -31,6 +31,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/at91sam9xeek_dataflash_cs0_defconfig b/configs/at91sam9xeek_dataflash_cs0_defconfig
index e38b718129..80673d2b63 100644
--- a/configs/at91sam9xeek_dataflash_cs0_defconfig
+++ b/configs/at91sam9xeek_dataflash_cs0_defconfig
@@ -31,6 +31,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig
index bc7eb03f87..8922065d38 100644
--- a/configs/at91sam9xeek_dataflash_cs1_defconfig
+++ b/configs/at91sam9xeek_dataflash_cs1_defconfig
@@ -31,6 +31,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig
index 7e59335756..9c28a59fe3 100644
--- a/configs/at91sam9xeek_nandflash_defconfig
+++ b/configs/at91sam9xeek_nandflash_defconfig
@@ -31,6 +31,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-- 
2.11.0

  parent reply	other threads:[~2017-04-12  9:14 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-12  9:14 [U-Boot] [PATCH v3 0/3] board: at91sam9260ek/9g20ek: Convert to support DM and DT Wenyou Yang
2017-04-12  9:14 ` [U-Boot] [PATCH v3 1/3] configs: at91sam9260ek/9g20ek: Update for DT and DM Wenyou Yang
2017-04-16 19:31   ` Simon Glass
2017-04-12  9:14 ` [U-Boot] [PATCH v3 2/3] board: at91sam9260ek: Clean up code Wenyou Yang
2017-04-16 19:31   ` Simon Glass
2017-04-12  9:14 ` Wenyou Yang [this message]
2017-04-16 19:31   ` [U-Boot] [PATCH v3 3/3] board: at91sam9260ek/9g20ek: Enable early debug UART Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170412091426.21052-4-wenyou.yang@atmel.com \
    --to=wenyou.yang@atmel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.