All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wenyou Yang <wenyou.yang@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/3] board: at91sam9263ek: Enable early debug UART
Date: Wed, 12 Apr 2017 17:23:04 +0800	[thread overview]
Message-ID: <20170412092304.21685-4-wenyou.yang@atmel.com> (raw)
In-Reply-To: <20170412092304.21685-1-wenyou.yang@atmel.com>

Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

Changes in v2:
 - Add [PATCH]: board: at91sam9263ek: Enable early debug UART.
 - Move out [PATCH] ARM: dts: at91: add dts files for at91sam9263ek.

 board/atmel/at91sam9263ek/at91sam9263ek.c     | 13 +++++++++++++
 configs/at91sam9263ek_dataflash_cs0_defconfig |  6 ++++++
 configs/at91sam9263ek_dataflash_defconfig     |  6 ++++++
 configs/at91sam9263ek_nandflash_defconfig     |  6 ++++++
 configs/at91sam9263ek_norflash_boot_defconfig |  6 ++++++
 configs/at91sam9263ek_norflash_defconfig      |  6 ++++++
 6 files changed, 43 insertions(+)

diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 2aafafe35e..3de978311d 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -7,6 +7,7 @@
  */
 
 #include <common.h>
+#include <debug_uart.h>
 #include <linux/sizes.h>
 #include <asm/arch/at91sam9263.h>
 #include <asm/arch/at91sam9_smc.h>
@@ -176,10 +177,22 @@ void lcd_show_board_info(void)
 #endif /* CONFIG_LCD_INFO */
 #endif
 
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+	at91_seriald_hw_init();
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
 int board_early_init_f(void)
 {
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
 	return 0;
 }
+#endif
 
 int board_init(void)
 {
diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig
index 701a49b115..02e91148ce 100644
--- a/configs/at91sam9263ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9263ek_dataflash_cs0_defconfig
@@ -36,6 +36,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig
index 701a49b115..02e91148ce 100644
--- a/configs/at91sam9263ek_dataflash_defconfig
+++ b/configs/at91sam9263ek_dataflash_defconfig
@@ -36,6 +36,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig
index 951f08d662..2ddcf2b714 100644
--- a/configs/at91sam9263ek_nandflash_defconfig
+++ b/configs/at91sam9263ek_nandflash_defconfig
@@ -36,6 +36,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig
index 4f8d19b9b1..21480c5d07 100644
--- a/configs/at91sam9263ek_norflash_boot_defconfig
+++ b/configs/at91sam9263ek_norflash_boot_defconfig
@@ -36,6 +36,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_USB=y
diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig
index a39d096187..824c366c44 100644
--- a/configs/at91sam9263ek_norflash_defconfig
+++ b/configs/at91sam9263ek_norflash_defconfig
@@ -36,6 +36,12 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_USB=y
-- 
2.11.0

  parent reply	other threads:[~2017-04-12  9:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-12  9:23 [U-Boot] [PATCH v2 0/3] board: at91sam9263ek: Convert to support DM and DT Wenyou Yang
2017-04-12  9:23 ` [U-Boot] [PATCH v2 1/3] configs: at91sam9263ek: Update for DT and DM support Wenyou Yang
2017-04-16 19:31   ` Simon Glass
2017-04-12  9:23 ` [U-Boot] [PATCH v2 2/3] board: at91sam9263ek: Clean up code Wenyou Yang
2017-04-16 19:31   ` Simon Glass
2017-04-12  9:23 ` Wenyou Yang [this message]
2017-04-16 19:31   ` [U-Boot] [PATCH v2 3/3] board: at91sam9263ek: Enable early debug UART Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170412092304.21685-4-wenyou.yang@atmel.com \
    --to=wenyou.yang@atmel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.