All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: davem@davemloft.net, netdev@vger.kernel.org
Subject: Re: [PATCH v2 net-next] net: stmmac: add drop transmit status feature
Date: Wed, 12 Apr 2017 16:58:33 +0200	[thread overview]
Message-ID: <20170412145833.GD7023@lunn.ch> (raw)
In-Reply-To: <d5e99129-eef0-1d15-7277-e3c82435bf9f@synopsys.com>

On Wed, Apr 12, 2017 at 01:07:02PM +0100, Joao Pinto wrote:
> Hi Andrew,
> 
> Às 12:56 PM de 4/12/2017, Andrew Lunn escreveu:
> > On Wed, Apr 12, 2017 at 10:26:20AM +0100, Joao Pinto wrote:
> >> When the Drop Transmit Status bit is set, the Tx packet status
> >> received from the MAC is dropped in the MTL. When this bit is reset,
> >> the Tx packet status received from the MAC is forwarded to the
> >> application. This feature will cause a performance improvement.
> >>
> >> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> >> ---
> >> changes v1->v2:
> >> - removed mask from dwmac4_enable_tx_drop()
> >>
> >>  Documentation/devicetree/bindings/net/stmmac.txt      |  1 +
> >>  drivers/net/ethernet/stmicro/stmmac/common.h          |  2 ++
> >>  drivers/net/ethernet/stmicro/stmmac/dwmac4.h          |  1 +
> >>  drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c     | 12 ++++++++++++
> >>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     |  3 +++
> >>  drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c |  2 ++
> >>  include/linux/stmmac.h                                |  1 +
> >>  7 files changed, 22 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
> >> index f652b0c..dbcb2cc 100644
> >> --- a/Documentation/devicetree/bindings/net/stmmac.txt
> >> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
> >> @@ -60,6 +60,7 @@ Optional properties:
> >>  		 and MAC2MAC connection.
> >>  - snps,tso: this enables the TSO feature otherwise it will be managed by
> >>  		 MAC HW capability register. Only for GMAC4 and newer.
> >> +- snps,drop-tx-status: this enables drop tx status
> > 
> > Hi Joao
> > 
> > Was the conclusion from testing that this cannot be turned on by
> > default?
> 
> This feature is great for applications that need good performance, but has a
> drawback since it has an impact in timestamp feature in Tx. There are some
> operations in PTP where the timestamp is given to the host through the TX status
> in the descriptor, so this will have an impact.
> 
> There's a way of solving this of course by making the driver checking the
> timestamp in the MAC_Tx_Timestamp_Status_XXX registers, but I can only look into
> that feature later in the future.

So the numbers you show, even if they are not on real hardware that
anybody uses, do look good.

But i don't like this DT property, it sounds like it can potential do
bad things to PTP, and you say it can be done without the DT or PTP
problems. So I would personally NACK this patch, and ask you to
re-submit when you have solved these issues.

But i don't use this driver, don't have any hardware, and i'm not a
maintainer for it....

    Andrew

  parent reply	other threads:[~2017-04-12 14:58 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-12  9:26 [PATCH v2 net-next] net: stmmac: add drop transmit status feature Joao Pinto
2017-04-12 11:56 ` Andrew Lunn
2017-04-12 12:07   ` Joao Pinto
2017-04-12 13:10     ` Andrew Lunn
2017-04-12 13:16       ` Joao Pinto
2017-04-12 13:52         ` Andrew Lunn
2017-04-12 13:55           ` Joao Pinto
2017-04-12 14:51             ` David Miller
2017-04-12 15:13               ` Joao Pinto
2017-04-12 15:28                 ` David Miller
2017-04-12 15:43                   ` Joao Pinto
2017-04-12 16:03                     ` David Miller
2017-04-12 14:58     ` Andrew Lunn [this message]
2017-04-12 17:43       ` Florian Fainelli
2017-04-18 10:25         ` Joao Pinto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170412145833.GD7023@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=Joao.Pinto@synopsys.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.