From: Jan Tulak <jtulak@redhat.com>
To: linux-xfs@vger.kernel.org
Cc: Jan Tulak <jtulak@redhat.com>
Subject: [PATCH 08/12] mkfs: replace variables with opts table: -b,d,s options
Date: Sun, 23 Apr 2017 20:54:59 +0200 [thread overview]
Message-ID: <20170423185503.31415-9-jtulak@redhat.com> (raw)
In-Reply-To: <20170423185503.31415-1-jtulak@redhat.com>
Remove variables that can be replaced with a direct access to the opts table,
so we have it all in a single place, acessible from anywhere.
In future, we can remove some passing of values forth and back, but now limit
the changes to simple replacement without a change in the logic.
This is first of multiple similar patches that do the same, but for other
options.
Signed-off-by: Jan Tulak <jtulak@redhat.com>
---
mkfs/xfs_mkfs.c | 814 ++++++++++++++++++++++++++++++++++----------------------
1 file changed, 503 insertions(+), 311 deletions(-)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 362c9b4..6857c30 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -35,13 +35,6 @@ static void respec(char opt, char *tab[], int idx);
static void unknown(char opt, char *s);
static int ispow2(unsigned int i);
-/*
- * The configured block and sector sizes are defined as global variables so
- * that they don't need to be passed to functions that require them.
- */
-uint64_t blocksize;
-uint64_t sectorsize;
-
#define MAX_OPTS 16
#define MAX_SUBOPTS 16
#define SUBOPT_NEEDS_VAL (-1LL)
@@ -757,7 +750,8 @@ struct opt_params {
/*
* Use this macro before we have superblock and mount structure
*/
-#define DTOBT(d) ((xfs_rfsblock_t)((d) >> (blocklog - BBSHIFT)))
+#define DTOBT(d) \
+ ((xfs_rfsblock_t)((d) >> (get_conf_val(OPT_B, B_LOG) - BBSHIFT)))
/*
* Use this for block reservations needed for mkfs's conditions
@@ -872,16 +866,16 @@ calc_stripe_factors(
*lsunit = BTOBBT(lsu);
/* verify if lsu/lsunit is a multiple block size */
- if (lsu % blocksize != 0) {
+ if (lsu % get_conf_val(OPT_B, B_SIZE) != 0) {
fprintf(stderr,
_("log stripe unit (%d) must be a multiple of the block size (%"PRIu64")\n"),
- lsu, blocksize);
+ lsu, get_conf_val(OPT_B, B_SIZE));
exit(1);
}
- if ((BBTOB(*lsunit) % blocksize != 0)) {
+ if ((BBTOB(*lsunit) % get_conf_val(OPT_B, B_SIZE) != 0)) {
fprintf(stderr,
_("log stripe unit (%"PRIu64") must be a multiple of the block size (%"PRIu64")\n"),
- BBTOB(*lsunit), blocksize);
+ BBTOB(*lsunit), get_conf_val(OPT_B, B_SIZE));
exit(1);
}
}
@@ -1037,7 +1031,7 @@ validate_log_size(uint64_t logblocks, int blocklog, int min_logblocks)
logblocks, XFS_MAX_LOG_BLOCKS);
usage();
}
- if ((logblocks << blocklog) > XFS_MAX_LOG_BYTES) {
+ if ((logblocks << get_conf_val(OPT_B, B_LOG)) > XFS_MAX_LOG_BYTES) {
fprintf(stderr,
_("log size %"PRIu64" bytes too large, maximum size is %lld bytes\n"),
(logblocks << blocklog), XFS_MAX_LOG_BYTES);
@@ -1131,9 +1125,9 @@ validate_ag_geometry(
}
/*
- * If agcount is too large, make it smaller.
+ * If D_AGCOUNT is too large, make it smaller.
*/
- if (agcount > XFS_MAX_AGNUMBER + 1) {
+ if (get_conf_val(OPT_D, D_AGCOUNT) > XFS_MAX_AGNUMBER + 1) {
fprintf(stderr,
_("%"PRIu64" allocation groups is too many, maximum is %"PRIu64"\n"),
agcount, (uint64_t)XFS_MAX_AGNUMBER + 1);
@@ -1439,7 +1433,8 @@ getnum(
* number.
*/
if (sp->convert)
- c = cvtnum(blocksize, sectorsize, str);
+ c = cvtnum(get_conf_val(OPT_B, B_SIZE),
+ get_conf_val(OPT_D, D_SECTSIZE), str);
else {
char *str_end;
@@ -1485,15 +1480,12 @@ main(
int argc,
char **argv)
{
- uint64_t agcount;
xfs_agf_t *agf;
xfs_agi_t *agi;
xfs_agnumber_t agno;
- uint64_t agsize;
xfs_alloc_rec_t *arec;
struct xfs_btree_block *block;
bool blflag;
- uint64_t blocklog;
bool bsflag;
uint64_t bsize;
xfs_buf_t *buf;
@@ -1504,11 +1496,6 @@ main(
char *dfile;
uint64_t dirblocklog;
uint64_t dirblocksize;
- uint64_t dbytes;
- uint64_t dsu;
- uint64_t dsw;
- uint64_t dsunit;
- uint64_t dswidth;
bool force_overwrite;
struct fsxattr fsx;
bool ilflag;
@@ -1545,7 +1532,6 @@ main(
xfs_mount_t mbuf;
xfs_extlen_t nbmblocks;
bool nlflag;
- bool nodsflag;
bool norsflag;
xfs_alloc_rec_t *nrec;
bool nsflag;
@@ -1563,7 +1549,6 @@ main(
uint64_t rtextbytes;
char *rtfile;
xfs_sb_t *sbp;
- uint64_t sectorlog;
uint64_t sector_mask;
bool slflag;
bool ssflag;
@@ -1596,10 +1581,9 @@ main(
textdomain(PACKAGE);
blflag = bsflag = slflag = ssflag = lslflag = lssflag = 0;
- blocklog = blocksize = 0;
- sectorlog = lsectorlog = 0;
- sectorsize = lsectorsize = 0;
- agsize = dasize = dblocks = 0;
+ lsectorlog = 0;
+ lsectorsize = 0;
+ dasize = dblocks = 0;
daflag = ilflag = imflag = ipflag = isflag = false;
liflag = laflag = lsflag = lsuflag = lsunitflag = ldflag = lvflag = false;
loginternal = 1;
@@ -1610,9 +1594,9 @@ main(
imaxpct = inodelog = inopblock = isize = 0;
dfile = logfile = rtfile = NULL;
protofile = NULL;
- rtbytes = rtextbytes = logbytes = dbytes = 0;
- dsu = dsw = dsunit = dswidth = lalign = lsu = lsunit = 0;
- nodsflag = norsflag = false;
+ rtbytes = rtextbytes = logbytes = 0;
+ lalign = lsu = lsunit = 0;
+ norsflag = false;
force_overwrite = false;
worst_freelist = 0;
memset(&fsx, 0, sizeof(fsx));
@@ -1629,6 +1613,7 @@ main(
break;
case 'b':
p = optarg;
+ uint64_t tmp;
while (*p != '\0') {
char **subopts =
(char **)opts[OPT_B].subopts;
@@ -1636,19 +1621,17 @@ main(
switch (getsubopt(&p, subopts, &value)) {
case B_LOG:
- blocklog = parse_conf_val(OPT_B, B_LOG,
- value);
- blocksize = 1 << blocklog;
+ tmp = parse_conf_val(OPT_B, B_LOG,
+ value);
+ set_conf_val(OPT_B, B_SIZE, 1 << tmp);
blflag = 1;
- set_conf_val(OPT_B, B_SIZE, blocksize);
break;
case B_SIZE:
- blocksize = parse_conf_val(OPT_B,
- B_SIZE,
- value);
- blocklog = libxfs_highbit32(blocksize);
+ tmp = parse_conf_val(OPT_B, B_SIZE,
+ value);
+ set_conf_val(OPT_B, B_LOG,
+ libxfs_highbit32(tmp));
bsflag = 1;
- set_conf_val(OPT_B, B_LOG, blocklog);
break;
default:
unknown('b', value);
@@ -1661,18 +1644,17 @@ main(
char **subopts =
(char **)opts[OPT_D].subopts;
char *value;
+ uint64_t tmp;
+
switch (getsubopt(&p, subopts, &value)) {
case D_AGCOUNT:
- agcount = parse_conf_val(OPT_D,
- D_AGCOUNT,
- value);
+ parse_conf_val(OPT_D, D_AGCOUNT,
+ value);
daflag = 1;
break;
case D_AGSIZE:
- agsize = parse_conf_val(OPT_D,
- D_AGSIZE,
- value);
+ parse_conf_val(OPT_D, D_AGSIZE, value);
dasize = 1;
break;
case D_FILE:
@@ -1686,49 +1668,70 @@ main(
set_conf_val(OPT_D, D_NAME, 1);
break;
case D_SIZE:
- dbytes = parse_conf_val(OPT_D, D_SIZE,
- value);
+ parse_conf_val(OPT_D, D_SIZE, value);
break;
case D_SUNIT:
- dsunit = parse_conf_val(OPT_D, D_SUNIT,
- value);
+ parse_conf_val(OPT_D, D_SUNIT, value);
break;
case D_SWIDTH:
- dswidth = parse_conf_val(OPT_D,
- D_SWIDTH,
- value);
+ parse_conf_val(OPT_D, D_SWIDTH, value);
break;
case D_SU:
- dsu = parse_conf_val(OPT_D, D_SU,
- value);
+ parse_conf_val(OPT_D, D_SU, value);
break;
case D_SW:
- dsw = parse_conf_val(OPT_D, D_SW,
- value);
+ parse_conf_val(OPT_D, D_SW, value);
break;
case D_NOALIGN:
- nodsflag = parse_conf_val(OPT_D,
- D_NOALIGN,
- value);
+ parse_conf_val(OPT_D, D_NOALIGN,
+ value);
break;
case D_SECTLOG:
- sectorlog = parse_conf_val(OPT_D,
- D_SECTLOG,
- value);
- sectorsize = 1 << sectorlog;
- slflag = 1;
+ /*
+ * we can set sector size both as
+ * -d sectsize/sectlog and as -s option.
+ * Thus we need to fill the same value
+ * into multiple options to make sure
+ * that we are doing the parsing right.
+ * Only D_SECTSIZE/D_SECTLOG is used
+ * later in the code, though.
+ */
+ tmp = parse_conf_val(OPT_D, D_SECTLOG,
+ value);
+
+ set_conf_val(OPT_S, S_LOG, tmp);
+ set_conf_val(OPT_S, S_SECTLOG, tmp);
set_conf_val(OPT_D, D_SECTSIZE,
- sectorsize);
+ 1 << tmp);
+ set_conf_val(OPT_S, S_SECTSIZE,
+ 1 << tmp);
+ set_conf_val(OPT_S, S_SIZE,
+ 1 << tmp);
+ slflag = 1;
break;
case D_SECTSIZE:
- sectorsize = parse_conf_val(OPT_D,
- D_SECTSIZE,
- value);
- sectorlog =
- libxfs_highbit32(sectorsize);
- ssflag = 1;
+ /*
+ * we can set sector size both as
+ * -d sectsize/sectlog and as -s option.
+ * Thus we need to fill the same value
+ * into multiple options to make sure
+ * that we are doing the parsing right.
+ * Only D_SECTSIZE/D_SECTLOG is used
+ * later in the code, though.
+ */
+ tmp = parse_conf_val(OPT_D, D_SECTSIZE,
+ value);
+
+ set_conf_val(OPT_S, S_SIZE, tmp);
+ set_conf_val(OPT_S, S_SECTSIZE, tmp);
set_conf_val(OPT_D, D_SECTLOG,
- sectorlog);
+ libxfs_highbit32(tmp));
+ set_conf_val(OPT_S, S_LOG,
+ libxfs_highbit32(tmp));
+ set_conf_val(OPT_S, S_SECTLOG,
+ libxfs_highbit32(tmp));
+
+ ssflag = 1;
break;
case D_RTINHERIT:
c = parse_conf_val(OPT_D, D_RTINHERIT,
@@ -2073,6 +2076,16 @@ main(
char **subopts =
(char **)opts[OPT_S].subopts;
char *value;
+ uint64_t tmp;
+ /*
+ * we can set sector size both as
+ * -d sectsize/sectlog and as -s option.
+ * Thus we need to fill the same value
+ * into multiple options to make sure
+ * that we are doing the parsing right.
+ * Only D_SECTSIZE/D_SECTLOG is used
+ * later in the code, though.
+ */
switch (getsubopt(&p, subopts, &value)) {
case S_LOG:
@@ -2081,14 +2094,21 @@ main(
conflict('s', subopts,
S_SECTSIZE,
S_SECTLOG);
- sectorlog = parse_conf_val(OPT_S,
+ tmp = parse_conf_val(OPT_S,
S_SECTLOG,
value);
- lsectorlog = sectorlog;
- sectorsize = 1 << sectorlog;
- lsectorsize = sectorsize;
+
+ set_conf_val(OPT_S, S_LOG, tmp);
+ set_conf_val(OPT_D, D_SECTLOG, tmp);
+ lsectorlog = tmp;
+ set_conf_val(OPT_D, D_SECTSIZE,
+ 1 << tmp);
+ set_conf_val(OPT_S, S_SIZE, 1 << tmp);
+ set_conf_val(OPT_S, S_SECTSIZE,
+ 1 << tmp);
+
+ lsectorsize = tmp;
lslflag = slflag = 1;
- set_conf_val(OPT_S, S_LOG, sectorsize);
break;
case S_SIZE:
case S_SECTSIZE:
@@ -2096,16 +2116,22 @@ main(
conflict('s', subopts,
S_SECTLOG,
S_SECTSIZE);
- sectorsize = parse_conf_val(OPT_S,
+ tmp = parse_conf_val(OPT_S,
S_SECTSIZE,
value);
- lsectorsize = sectorsize;
- sectorlog =
- libxfs_highbit32(sectorsize);
- lsectorlog = sectorlog;
+
+ set_conf_val(OPT_S, S_SIZE, tmp);
+ set_conf_val(OPT_D, D_SECTSIZE, tmp);
+ lsectorsize = tmp;
+ set_conf_val(OPT_D, D_SECTLOG,
+ libxfs_highbit32(tmp));
+ set_conf_val(OPT_S, S_LOG,
+ libxfs_highbit32(tmp));
+ set_conf_val(OPT_S, S_SECTLOG,
+ libxfs_highbit32(tmp));
+ lsectorlog = libxfs_highbit32(tmp);
+
lssflag = ssflag = 1;
- set_conf_val(OPT_S,
- S_SIZE, sectorlog);
break;
default:
unknown('s', value);
@@ -2129,19 +2155,22 @@ main(
dfile = xi.dname;
/*
- * Blocksize and sectorsize first, other things depend on them
+ * Blocksize and D_SECTSIZE first, other things depend on them
* For RAID4/5/6 we want to align sector size and block size,
* so we need to start with the device geometry extraction too.
*/
if (!blflag && !bsflag) {
- blocklog = XFS_DFL_BLOCKSIZE_LOG;
- blocksize = 1 << XFS_DFL_BLOCKSIZE_LOG;
+ set_conf_val(OPT_B, B_LOG, XFS_DFL_BLOCKSIZE_LOG);
+ set_conf_val(OPT_B, B_SIZE, 1 << XFS_DFL_BLOCKSIZE_LOG);
}
- if (blocksize < XFS_MIN_BLOCKSIZE || blocksize > XFS_MAX_BLOCKSIZE) {
- fprintf(stderr, _("illegal block size %"PRIu64"\n"), blocksize);
+ if (get_conf_val(OPT_B, B_SIZE) < XFS_MIN_BLOCKSIZE ||
+ get_conf_val(OPT_B, B_SIZE) > XFS_MAX_BLOCKSIZE) {
+ fprintf(stderr, _("illegal block size %"PRIu64"\n"),
+ get_conf_val(OPT_B, B_SIZE));
usage();
}
- if (sb_feat.crcs_enabled && blocksize < XFS_MIN_CRC_BLOCKSIZE) {
+ if (sb_feat.crcs_enabled &&
+ get_conf_val(OPT_B, B_SIZE) < XFS_MIN_CRC_BLOCKSIZE) {
fprintf(stderr,
_("Minimum block size for CRC enabled filesystems is %d bytes.\n"),
XFS_MIN_CRC_BLOCKSIZE);
@@ -2153,12 +2182,12 @@ _("Minimum block size for CRC enabled filesystems is %d bytes.\n"),
}
if (!slflag && !ssflag) {
- sectorlog = XFS_MIN_SECTORSIZE_LOG;
- sectorsize = XFS_MIN_SECTORSIZE;
+ set_conf_val(OPT_D, D_SECTLOG, XFS_MIN_SECTORSIZE_LOG);
+ set_conf_val(OPT_D, D_SECTSIZE, XFS_MIN_SECTORSIZE);
}
if (!lslflag && !lssflag) {
- lsectorlog = sectorlog;
- lsectorsize = sectorsize;
+ lsectorlog = get_conf_val(OPT_D, D_SECTLOG);
+ lsectorsize = get_conf_val(OPT_D, D_SECTSIZE);
}
/*
@@ -2168,7 +2197,8 @@ _("Minimum block size for CRC enabled filesystems is %d bytes.\n"),
* sector size mismatches between the new filesystem and the underlying
* host filesystem.
*/
- check_device_type(dfile, &xi.disfile, !dbytes, !dfile,
+ check_device_type(dfile, &xi.disfile, !get_conf_val(OPT_D, D_SIZE),
+ !dfile,
Nflag ? NULL : &xi.dcreat, force_overwrite, "d");
if (!loginternal)
check_device_type(xi.logname, &xi.lisfile, !logbytes,
@@ -2197,50 +2227,58 @@ _("Minimum block size for CRC enabled filesystems is %d bytes.\n"),
if (!ft.psectorsize)
ft.psectorsize = ft.lsectorsize;
- sectorsize = ft.psectorsize ? ft.psectorsize :
- XFS_MIN_SECTORSIZE;
+ set_conf_val(OPT_D, D_SECTSIZE,
+ ft.psectorsize ? ft.psectorsize :
+ XFS_MIN_SECTORSIZE);
- if ((blocksize < sectorsize) && (blocksize >= ft.lsectorsize)) {
+ if ((get_conf_val(OPT_B, B_SIZE) <
+ get_conf_val(OPT_D, D_SECTSIZE)) &&
+ (get_conf_val(OPT_B, B_SIZE) >= ft.lsectorsize)) {
fprintf(stderr,
_("specified blocksize %"PRIu64" is less than device physical sector size %d\n"),
- blocksize, ft.psectorsize);
+ get_conf_val(OPT_B, B_SIZE), ft.psectorsize);
fprintf(stderr,
_("switching to logical sector size %d\n"),
ft.lsectorsize);
- sectorsize = ft.lsectorsize ? ft.lsectorsize :
- XFS_MIN_SECTORSIZE;
+ set_conf_val(OPT_D, D_SECTSIZE,
+ ft.lsectorsize ? ft.lsectorsize :
+ XFS_MIN_SECTORSIZE);
}
}
if (!ssflag) {
- sectorlog = libxfs_highbit32(sectorsize);
+ set_conf_val(OPT_D, D_SECTLOG,
+ libxfs_highbit32(get_conf_val(OPT_D, D_SECTSIZE)));
if (loginternal) {
- lsectorsize = sectorsize;
- lsectorlog = sectorlog;
+ lsectorsize = get_conf_val(OPT_D, D_SECTSIZE);
+ lsectorlog = get_conf_val(OPT_D, D_SECTLOG);
}
}
- if (sectorsize < XFS_MIN_SECTORSIZE ||
- sectorsize > XFS_MAX_SECTORSIZE || sectorsize > blocksize) {
+ if (get_conf_val(OPT_D, D_SECTSIZE) < XFS_MIN_SECTORSIZE ||
+ get_conf_val(OPT_D, D_SECTSIZE) > XFS_MAX_SECTORSIZE ||
+ get_conf_val(OPT_D, D_SECTSIZE) > get_conf_val(OPT_B, B_SIZE)) {
if (ssflag)
- fprintf(stderr, _("illegal sector size %"PRIu64"\n"), sectorsize);
+ fprintf(stderr, _("illegal sector size %"PRIu64"\n"),
+ get_conf_val(OPT_D, D_SECTSIZE));
else
fprintf(stderr,
_("block size %"PRIu64" cannot be smaller than logical sector size %d\n"),
- blocksize, ft.lsectorsize);
+ get_conf_val(OPT_B, B_SIZE), ft.lsectorsize);
usage();
}
- if (sectorsize < ft.lsectorsize) {
+ if (get_conf_val(OPT_D, D_SECTSIZE) < ft.lsectorsize) {
fprintf(stderr, _("illegal sector size %"PRIu64"; hw sector is %d\n"),
- sectorsize, ft.lsectorsize);
+ get_conf_val(OPT_D, D_SECTSIZE), ft.lsectorsize);
usage();
}
if (lsectorsize < XFS_MIN_SECTORSIZE ||
- lsectorsize > XFS_MAX_SECTORSIZE || lsectorsize > blocksize) {
+ lsectorsize > XFS_MAX_SECTORSIZE ||
+ lsectorsize > get_conf_val(OPT_B, B_SIZE)) {
fprintf(stderr, _("illegal log sector size %"PRIu64"\n"), lsectorsize);
usage();
} else if (lsectorsize > XFS_MIN_SECTORSIZE && !lsu && !lsunit) {
- lsu = blocksize;
+ lsu = get_conf_val(OPT_B, B_SIZE);
sb_feat.log_version = 2;
}
@@ -2342,37 +2380,41 @@ _("rmapbt not supported with realtime devices\n"));
}
if (nsflag || nlflag) {
- if (dirblocksize < blocksize ||
+ if (dirblocksize < get_conf_val(OPT_B, B_SIZE) ||
dirblocksize > XFS_MAX_BLOCKSIZE) {
fprintf(stderr, _("illegal directory block size %"PRIu64"\n"),
dirblocksize);
usage();
}
} else {
- if (blocksize < (1 << XFS_MIN_REC_DIRSIZE))
+ if (get_conf_val(OPT_B, B_SIZE) < (1 << XFS_MIN_REC_DIRSIZE))
dirblocklog = XFS_MIN_REC_DIRSIZE;
else
- dirblocklog = blocklog;
+ dirblocklog = get_conf_val(OPT_B, B_LOG);
dirblocksize = 1 << dirblocklog;
}
- if (dbytes) {
- if (dbytes % XFS_MIN_BLOCKSIZE) {
+ if (get_conf_val(OPT_D, D_SIZE)) {
+ if (get_conf_val(OPT_D, D_SIZE) % XFS_MIN_BLOCKSIZE) {
fprintf(stderr,
_("illegal data length %"PRIu64", not a multiple of %d\n"),
- dbytes, XFS_MIN_BLOCKSIZE);
+ get_conf_val(OPT_D, D_SIZE), XFS_MIN_BLOCKSIZE);
usage();
}
- dblocks = (xfs_rfsblock_t)(dbytes >> blocklog);
- if (dbytes % blocksize)
+ dblocks = (xfs_rfsblock_t)(get_conf_val(OPT_D, D_SIZE) >>
+ get_conf_val(OPT_B, B_LOG));
+ if (get_conf_val(OPT_D, D_SIZE) % get_conf_val(OPT_B, B_SIZE))
fprintf(stderr, _("warning: "
"data length %"PRIu64" not a multiple of %"PRIu64", truncated to %"PRIu64"\n"),
- dbytes, blocksize,
- (uint64_t)(dblocks << blocklog));
+ get_conf_val(OPT_D, D_SIZE),
+ get_conf_val(OPT_B, B_SIZE),
+ (uint64_t)(dblocks <<
+ get_conf_val(OPT_B, B_LOG)));
}
if (ipflag) {
- inodelog = blocklog - libxfs_highbit32(inopblock);
+ inodelog = get_conf_val(OPT_B, B_LOG) -
+ libxfs_highbit32(inopblock);
isize = 1 << inodelog;
} else if (!ilflag && !isflag) {
inodelog = sb_feat.crcs_enabled ? XFS_DINODE_DFL_CRC_LOG
@@ -2393,12 +2435,14 @@ _("rmapbt not supported with realtime devices\n"));
logbytes, XFS_MIN_BLOCKSIZE);
usage();
}
- logblocks = (xfs_rfsblock_t)(logbytes >> blocklog);
- if (logbytes % blocksize)
+ logblocks = (xfs_rfsblock_t)(logbytes >>
+ get_conf_val(OPT_B, B_LOG));
+ if (logbytes % get_conf_val(OPT_B, B_SIZE))
fprintf(stderr,
_("warning: log length %"PRIu64" not a multiple of %"PRIu64", truncated to %"PRIu64"\n"),
- logbytes, blocksize,
- (uint64_t)(logblocks << blocklog));
+ logbytes, get_conf_val(OPT_B, B_SIZE),
+ (uint64_t)(logblocks <<
+ get_conf_val(OPT_B, B_LOG)));
}
if (rtbytes) {
if (rtbytes % XFS_MIN_BLOCKSIZE) {
@@ -2407,24 +2451,27 @@ _("rmapbt not supported with realtime devices\n"));
rtbytes, XFS_MIN_BLOCKSIZE);
usage();
}
- rtblocks = (xfs_rfsblock_t)(rtbytes >> blocklog);
- if (rtbytes % blocksize)
+ rtblocks = (xfs_rfsblock_t)(rtbytes >>
+ get_conf_val(OPT_B, B_LOG));
+ if (rtbytes % get_conf_val(OPT_B, B_SIZE))
fprintf(stderr,
_("warning: rt length %"PRIu64" not a multiple of %"PRIu64", truncated to %"PRIu64"\n"),
- rtbytes, blocksize,
- (uint64_t)(rtblocks << blocklog));
+ rtbytes, get_conf_val(OPT_B, B_SIZE),
+ (uint64_t)(rtblocks <<
+ get_conf_val(OPT_B, B_LOG)));
}
/*
* If specified, check rt extent size against its constraints.
*/
if (rtextbytes) {
- if (rtextbytes % blocksize) {
+ if (rtextbytes % get_conf_val(OPT_B, B_SIZE)) {
fprintf(stderr,
_("illegal rt extent size %"PRIu64", not a multiple of %"PRIu64"\n"),
- rtextbytes, blocksize);
+ rtextbytes, get_conf_val(OPT_B, B_SIZE));
usage();
}
- rtextblocks = (xfs_extlen_t)(rtextbytes >> blocklog);
+ rtextblocks = (xfs_extlen_t)(rtextbytes >>
+ get_conf_val(OPT_B, B_LOG));
} else {
/*
* If realtime extsize has not been specified by the user,
@@ -2439,18 +2486,21 @@ _("rmapbt not supported with realtime devices\n"));
else
rswidth = 0;
- /* check that rswidth is a multiple of fs blocksize */
- if (!norsflag && rswidth && !(BBTOB(rswidth) % blocksize)) {
+ /* check that rswidth is a multiple of fs B_SIZE */
+ if (!norsflag && rswidth &&
+ !(BBTOB(rswidth) % get_conf_val(OPT_B, B_SIZE))) {
rswidth = DTOBT(rswidth);
- rtextbytes = rswidth << blocklog;
+ rtextbytes = rswidth << get_conf_val(OPT_B, B_LOG);
if (XFS_MIN_RTEXTSIZE <= rtextbytes &&
(rtextbytes <= XFS_MAX_RTEXTSIZE)) {
rtextblocks = rswidth;
}
}
if (!rtextblocks) {
- rtextblocks = (blocksize < XFS_MIN_RTEXTSIZE) ?
- XFS_MIN_RTEXTSIZE >> blocklog : 1;
+ rtextblocks = (get_conf_val(OPT_B, B_SIZE) <
+ XFS_MIN_RTEXTSIZE) ?
+ XFS_MIN_RTEXTSIZE >>
+ get_conf_val(OPT_B, B_LOG) : 1;
}
}
ASSERT(rtextblocks);
@@ -2458,22 +2508,25 @@ _("rmapbt not supported with realtime devices\n"));
/*
* Check some argument sizes against mins, maxes.
*/
- if (isize > blocksize / XFS_MIN_INODE_PERBLOCK ||
+ if (isize > get_conf_val(OPT_B, B_SIZE) / XFS_MIN_INODE_PERBLOCK ||
isize < XFS_DINODE_MIN_SIZE ||
isize > XFS_DINODE_MAX_SIZE) {
int maxsz;
fprintf(stderr, _("illegal inode size %"PRIu64"\n"), isize);
- maxsz = MIN(blocksize / XFS_MIN_INODE_PERBLOCK,
+ maxsz = MIN(get_conf_val(OPT_B, B_SIZE) /
+ XFS_MIN_INODE_PERBLOCK,
XFS_DINODE_MAX_SIZE);
if (XFS_DINODE_MIN_SIZE == maxsz)
fprintf(stderr,
_("allowable inode size with %"PRIu64" byte blocks is %d\n"),
- blocksize, XFS_DINODE_MIN_SIZE);
+ get_conf_val(OPT_B, B_SIZE),
+ XFS_DINODE_MIN_SIZE);
else
fprintf(stderr,
_("allowable inode size with %"PRIu64" byte blocks is between %d and %d\n"),
- blocksize, XFS_DINODE_MIN_SIZE, maxsz);
+ get_conf_val(OPT_B, B_SIZE),
+ XFS_DINODE_MIN_SIZE, maxsz);
exit(1);
}
@@ -2484,10 +2537,20 @@ _("rmapbt not supported with realtime devices\n"));
sb_feat.log_version = 2;
}
- calc_stripe_factors(dsu, dsw, sectorsize, lsu, lsectorsize,
+ uint64_t dsunit = get_conf_val(OPT_D, D_SUNIT);
+ uint64_t dswidth = get_conf_val(OPT_D, D_SWIDTH);
+
+ calc_stripe_factors(get_conf_val(OPT_D, D_SU),
+ get_conf_val(OPT_D, D_SW),
+ get_conf_val(OPT_D, D_SECTSIZE),
+ lsu,
+ lsectorsize,
&dsunit, &dswidth, &lsunit);
- xi.setblksize = sectorsize;
+ set_conf_val(OPT_D, D_SUNIT, dsunit);
+ set_conf_val(OPT_D, D_SWIDTH, dswidth);
+
+ xi.setblksize = get_conf_val(OPT_D, D_SECTSIZE);
/*
* Initialize. This will open the log and rt devices as well.
@@ -2510,7 +2573,8 @@ _("rmapbt not supported with realtime devices\n"));
* multiple of the sector size, or 1024, whichever is larger.
*/
- sector_mask = (uint64_t)-1 << (MAX(sectorlog, 10) - BBSHIFT);
+ sector_mask = (uint64_t)-1 <<
+ (MAX(get_conf_val(OPT_D, D_SECTLOG), 10) - BBSHIFT);
xi.dsize &= sector_mask;
xi.rtsize &= sector_mask;
xi.logBBsize &= (uint64_t)-1 << (MAX(lsectorlog, 10) - BBSHIFT);
@@ -2545,16 +2609,17 @@ _("rmapbt not supported with realtime devices\n"));
rtfile = _("volume rt");
else if (!xi.rtdev)
rtfile = _("none");
- if (dbytes && xi.dsize > 0 && dblocks > DTOBT(xi.dsize)) {
+ if (get_conf_val(OPT_D, D_SIZE) &&
+ xi.dsize > 0 && dblocks > DTOBT(xi.dsize)) {
fprintf(stderr,
_("size %s specified for data subvolume is too large, "
"maximum is %"PRIu64" blocks\n"),
get_conf_raw(OPT_D, D_SIZE),
(uint64_t)DTOBT(xi.dsize));
usage();
- } else if (!dbytes && xi.dsize > 0)
+ } else if (!get_conf_val(OPT_D, D_SIZE) && xi.dsize > 0)
dblocks = DTOBT(xi.dsize);
- else if (!dbytes) {
+ else if (!get_conf_val(OPT_D, D_SIZE)) {
fprintf(stderr, _("can't get size of data subvolume\n"));
usage();
}
@@ -2569,17 +2634,18 @@ _("rmapbt not supported with realtime devices\n"));
fprintf(stderr,
_("can't have both external and internal logs\n"));
usage();
- } else if (loginternal && sectorsize != lsectorsize) {
+ } else if (loginternal &&
+ get_conf_val(OPT_D, D_SECTSIZE) != lsectorsize) {
fprintf(stderr,
_("data and log sector sizes must be equal for internal logs\n"));
usage();
}
- if (xi.dbsize > sectorsize) {
+ if (xi.dbsize > get_conf_val(OPT_D, D_SECTSIZE)) {
fprintf(stderr, _(
"Warning: the data subvolume sector size %"PRIu64" is less than the sector size \n\
reported by the device (%u).\n"),
- sectorsize, xi.dbsize);
+ get_conf_val(OPT_D, D_SECTSIZE), xi.dbsize);
}
if (!loginternal && xi.lbsize > lsectorsize) {
fprintf(stderr, _(
@@ -2587,11 +2653,12 @@ reported by the device (%u).\n"),
reported by the device (%u).\n"),
lsectorsize, xi.lbsize);
}
- if (rtbytes && xi.rtsize > 0 && xi.rtbsize > sectorsize) {
+ if (rtbytes && xi.rtsize > 0 &&
+ xi.rtbsize > get_conf_val(OPT_D, D_SECTSIZE)) {
fprintf(stderr, _(
"Warning: the realtime subvolume sector size %"PRIu64" is less than the sector size\n\
reported by the device (%u).\n"),
- sectorsize, xi.rtbsize);
+ get_conf_val(OPT_D, D_SECTSIZE), xi.rtbsize);
}
if (rtbytes && xi.rtsize > 0 && rtblocks > DTOBT(xi.rtsize)) {
@@ -2610,119 +2677,173 @@ reported by the device (%u).\n"),
}
if (xi.rtdev) {
rtextents = rtblocks / rtextblocks;
- nbmblocks = (xfs_extlen_t)howmany(rtextents, NBBY * blocksize);
+ nbmblocks = (xfs_extlen_t)howmany(rtextents, NBBY *
+ get_conf_val(OPT_B, B_SIZE));
} else {
rtextents = rtblocks = 0;
nbmblocks = 0;
}
- if (!nodsflag) {
- if (dsunit) {
- if (ft.dsunit && ft.dsunit != dsunit) {
+ if (!get_conf_val(OPT_D, D_NOALIGN)) {
+ if (get_conf_val(OPT_D, D_SUNIT)) {
+ if (ft.dsunit &&
+ ft.dsunit != get_conf_val(OPT_D, D_SUNIT)) {
fprintf(stderr,
_("%s: Specified data stripe unit %"PRIu64" "
"is not the same as the volume stripe "
"unit %d\n"),
- progname, dsunit, ft.dsunit);
+ progname,
+ get_conf_val(OPT_D, D_SUNIT),
+ ft.dsunit);
}
- if (ft.dswidth && ft.dswidth != dswidth) {
+ if (ft.dswidth &&
+ ft.dswidth != get_conf_val(OPT_D, D_SWIDTH)) {
fprintf(stderr,
_("%s: Specified data stripe width %"PRIu64" "
"is not the same as the volume stripe "
"width %d\n"),
- progname, dswidth, ft.dswidth);
+ progname,
+ get_conf_val(OPT_D, D_SWIDTH),
+ ft.dswidth);
}
} else {
- dsunit = ft.dsunit;
- dswidth = ft.dswidth;
- nodsflag = 1;
+ set_conf_val(OPT_D, D_SUNIT, ft.dsunit);
+ set_conf_val(OPT_D, D_SWIDTH, ft.dswidth);
+ set_conf_val(OPT_D, D_NOALIGN, 1);
}
- } /* else dsunit & dswidth can't be set if nodsflag is set */
+ } /* else D_SUNIT & D_SWIDTH can't be set if D_NOALIGN is set */
if (dasize) { /* User-specified AG size */
/*
- * Check specified agsize is a multiple of blocksize.
+ * Check specified D_AGSIZE is a multiple of B_SIZE.
*/
- if (agsize % blocksize) {
+ if (get_conf_val(OPT_D, D_AGSIZE) %
+ get_conf_val(OPT_B, B_SIZE)) {
fprintf(stderr,
_("agsize (%"PRIu64") not a multiple of fs blk size (%"PRIu64")\n"),
- agsize, blocksize);
+ get_conf_val(OPT_D, D_AGSIZE),
+ get_conf_val(OPT_B, B_SIZE));
usage();
}
- agsize /= blocksize;
- agcount = dblocks / agsize + (dblocks % agsize != 0);
+ set_conf_val(OPT_D, D_AGSIZE,
+ get_conf_val(OPT_D, D_AGSIZE) /
+ get_conf_val(OPT_B, B_SIZE));
+ set_conf_val(OPT_D, D_AGCOUNT,
+ dblocks / get_conf_val(OPT_D, D_AGSIZE) +
+ (dblocks % get_conf_val(OPT_D, D_AGSIZE) != 0));
} else if (daflag) { /* User-specified AG count */
- agsize = dblocks / agcount + (dblocks % agcount != 0);
+ set_conf_val(OPT_D, D_AGSIZE,
+ dblocks / get_conf_val(OPT_D, D_AGCOUNT) +
+ (dblocks % get_conf_val(OPT_D, D_AGCOUNT) != 0));
} else {
- calc_default_ag_geometry(blocklog, dblocks,
- dsunit | dswidth, &agsize, &agcount);
+ uint64_t agcount = get_conf_val(OPT_D, D_AGCOUNT);
+ uint64_t agsize = get_conf_val(OPT_D, D_AGSIZE);
+
+ calc_default_ag_geometry(get_conf_val(OPT_B, B_LOG),
+ dblocks, get_conf_val(OPT_D, D_SUNIT)
+ | get_conf_val(OPT_D, D_SWIDTH),
+ &agsize, &agcount);
+ set_conf_val(OPT_D, D_AGCOUNT, agcount);
+ set_conf_val(OPT_D, D_AGSIZE, agsize);
}
/*
- * If dsunit is a multiple of fs blocksize, then check that is a
- * multiple of the agsize too
+ * If D_SUNIT is a multiple of fs B_SIZE,
+ * then check that is a multiple of the D_AGSIZE too
*/
- if (dsunit && !(BBTOB(dsunit) % blocksize) &&
- dswidth && !(BBTOB(dswidth) % blocksize)) {
-
- /* convert from 512 byte blocks to fs blocksize */
- dsunit = DTOBT(dsunit);
- dswidth = DTOBT(dswidth);
+ if (get_conf_val(OPT_D, D_SUNIT) &&
+ !(BBTOB(get_conf_val(OPT_D, D_SUNIT)) %
+ get_conf_val(OPT_B, B_SIZE)) &&
+ get_conf_val(OPT_D, D_SWIDTH) &&
+ !(BBTOB(get_conf_val(OPT_D, D_SWIDTH)) %
+ get_conf_val(OPT_B, B_SIZE))) {
+
+ /* convert from 512 byte blocks to fs B_SIZE
+ */
+ set_conf_val(OPT_D, D_SUNIT,
+ DTOBT(get_conf_val(OPT_D, D_SUNIT)));
+ set_conf_val(OPT_D, D_SWIDTH,
+ DTOBT(get_conf_val(OPT_D, D_SWIDTH)));
/*
- * agsize is not a multiple of dsunit
+ * D_AGSIZE is not a multiple of D_SUNIT
*/
- if ((agsize % dsunit) != 0) {
+ if ((get_conf_val(OPT_D, D_AGSIZE) %
+ get_conf_val(OPT_D, D_SUNIT)) != 0) {
/*
* Round up to stripe unit boundary. Also make sure
- * that agsize is still larger than
- * XFS_AG_MIN_BLOCKS(blocklog)
+ * that D_AGSIZE is still larger than
+ * XFS_AG_MIN_BLOCKS(get_conf_val(OPT_B, B_LOG))
*/
- tmp_agsize = ((agsize + (dsunit - 1))/ dsunit) * dsunit;
+ tmp_agsize = ((get_conf_val(OPT_D, D_AGSIZE) +
+ (get_conf_val(OPT_D, D_SUNIT) - 1)) /
+ get_conf_val(OPT_D, D_SUNIT)) *
+ get_conf_val(OPT_D, D_SUNIT);
/*
* Round down to stripe unit boundary if rounding up
* created an AG size that is larger than the AG max.
*/
- if (tmp_agsize > XFS_AG_MAX_BLOCKS(blocklog))
- tmp_agsize = ((agsize) / dsunit) * dsunit;
-
- if ((tmp_agsize >= XFS_AG_MIN_BLOCKS(blocklog)) &&
- (tmp_agsize <= XFS_AG_MAX_BLOCKS(blocklog))) {
- agsize = tmp_agsize;
+ if (tmp_agsize >
+ XFS_AG_MAX_BLOCKS(get_conf_val(OPT_B, B_LOG)))
+ tmp_agsize = ((get_conf_val(OPT_D, D_AGSIZE)) /
+ get_conf_val(OPT_D, D_SUNIT)) *
+ get_conf_val(OPT_D, D_SUNIT);
+
+ if ((tmp_agsize >=
+ XFS_AG_MIN_BLOCKS(get_conf_val(OPT_B, B_LOG))) &&
+ (tmp_agsize <=
+ XFS_AG_MAX_BLOCKS(get_conf_val(OPT_B, B_LOG)))) {
+ set_conf_val(OPT_D, D_AGSIZE, tmp_agsize);
if (!daflag)
- agcount = dblocks/agsize +
- (dblocks % agsize != 0);
+ set_conf_val(OPT_D, D_AGCOUNT,
+ dblocks /
+ get_conf_val(OPT_D, D_AGSIZE) +
+ (dblocks %
+ get_conf_val(OPT_D, D_AGSIZE)
+ != 0));
if (dasize)
fprintf(stderr,
_("agsize rounded to %"PRIu64", swidth = %"PRIu64"\n"),
- agsize, dswidth);
+ get_conf_val(OPT_D, D_AGSIZE),
+ get_conf_val(OPT_D, D_SWIDTH));
} else {
- if (nodsflag) {
- dsunit = dswidth = 0;
+ if (get_conf_val(OPT_D, D_NOALIGN)) {
+ set_conf_val(OPT_D, D_SUNIT, 0);
+ set_conf_val(OPT_D, D_SWIDTH, 0);
} else {
/*
- * agsize is out of bounds, this will
+ * D_AGSIZE is out of bounds, this will
* print nice details & exit.
*/
- validate_ag_geometry(blocklog, dblocks,
- agsize, agcount);
+ validate_ag_geometry(
+ get_conf_val(OPT_B, B_LOG),
+ dblocks,
+ get_conf_val(OPT_D, D_AGSIZE),
+ get_conf_val(OPT_D, D_AGCOUNT));
exit(1);
}
}
}
- if (dswidth && ((agsize % dswidth) == 0) && (agcount > 1)) {
+ if (get_conf_val(OPT_D, D_SWIDTH) &&
+ ((get_conf_val(OPT_D, D_AGSIZE) %
+ get_conf_val(OPT_D, D_SWIDTH)) == 0) &&
+ (get_conf_val(OPT_D, D_AGCOUNT) > 1)) {
/* This is a non-optimal configuration because all AGs
* start on the same disk in the stripe. Changing
* the AG size by one sunit will guarantee that this
* does not happen.
*/
- tmp_agsize = agsize - dsunit;
- if (tmp_agsize < XFS_AG_MIN_BLOCKS(blocklog)) {
- tmp_agsize = agsize + dsunit;
- if (dblocks < agsize) {
+ tmp_agsize = get_conf_val(OPT_D, D_AGSIZE) -
+ get_conf_val(OPT_D, D_SUNIT);
+ if (tmp_agsize <
+ XFS_AG_MIN_BLOCKS(get_conf_val(OPT_B, B_LOG))) {
+ tmp_agsize = get_conf_val(OPT_D, D_AGSIZE) +
+ get_conf_val(OPT_D, D_SUNIT);
+ if (dblocks < get_conf_val(OPT_D, D_AGSIZE)) {
/* oh well, nothing to do */
- tmp_agsize = agsize;
+ tmp_agsize =
+ get_conf_val(OPT_D, D_AGSIZE);
}
}
if (daflag || dasize) {
@@ -2732,30 +2853,46 @@ problems by aligning all AGs on the same disk. To avoid this, run mkfs with\n\
an AG size that is one stripe unit smaller, for example %"PRIu64".\n"),
tmp_agsize);
} else {
- agsize = tmp_agsize;
- agcount = dblocks/agsize + (dblocks % agsize != 0);
+ set_conf_val(OPT_D, D_AGSIZE, tmp_agsize);
+ set_conf_val(OPT_D, D_AGCOUNT,
+ dblocks/get_conf_val(OPT_D, D_AGSIZE) +
+ (dblocks %
+ get_conf_val(OPT_D, D_AGSIZE)
+ != 0));
/*
* If the last AG is too small, reduce the
* filesystem size and drop the blocks.
*/
- if ( dblocks % agsize != 0 &&
- (dblocks % agsize <
- XFS_AG_MIN_BLOCKS(blocklog))) {
- dblocks = (xfs_rfsblock_t)((agcount - 1) * agsize);
- agcount--;
- ASSERT(agcount != 0);
+ if (dblocks % get_conf_val(OPT_D, D_AGSIZE)
+ != 0 &&
+ (dblocks % get_conf_val(OPT_D, D_AGSIZE) <
+ XFS_AG_MIN_BLOCKS(
+ get_conf_val(OPT_B, B_LOG)))) {
+
+ dblocks = (xfs_rfsblock_t)(
+ (get_conf_val(OPT_D, D_AGCOUNT)
+ - 1) *
+ get_conf_val(OPT_D, D_AGSIZE));
+ set_conf_val(OPT_D, D_AGCOUNT,
+ get_conf_val(OPT_D, D_AGCOUNT)
+ - 1);
+ ASSERT(get_conf_val(OPT_D, D_AGCOUNT)
+ != 0);
}
}
}
} else {
- if (nodsflag)
- dsunit = dswidth = 0;
- else {
+ if (get_conf_val(OPT_D, D_NOALIGN)) {
+ set_conf_val(OPT_D, D_SWIDTH, 0);
+ set_conf_val(OPT_D, D_SUNIT, 0);
+ } else {
fprintf(stderr,
_("%s: Stripe unit(%"PRIu64") or stripe width(%"PRIu64") is "
"not a multiple of the block size(%"PRIu64")\n"),
- progname, BBTOB(dsunit), BBTOB(dswidth),
- blocksize);
+ progname,
+ BBTOB(get_conf_val(OPT_D, D_SUNIT)),
+ BBTOB(get_conf_val(OPT_D, D_SWIDTH)),
+ get_conf_val(OPT_B, B_SIZE));
exit(1);
}
}
@@ -2764,52 +2901,68 @@ an AG size that is one stripe unit smaller, for example %"PRIu64".\n"),
* If the last AG is too small, reduce the filesystem size
* and drop the blocks.
*/
- if ( dblocks % agsize != 0 &&
- (dblocks % agsize < XFS_AG_MIN_BLOCKS(blocklog))) {
+ if (dblocks % get_conf_val(OPT_D, D_AGSIZE) != 0 &&
+ (dblocks % get_conf_val(OPT_D, D_AGSIZE) <
+ XFS_AG_MIN_BLOCKS(get_conf_val(OPT_B, B_LOG)))) {
ASSERT(!daflag);
- dblocks = (xfs_rfsblock_t)((agcount - 1) * agsize);
- agcount--;
- ASSERT(agcount != 0);
+ dblocks = (xfs_rfsblock_t)(
+ (get_conf_val(OPT_D, D_AGCOUNT) - 1) *
+ get_conf_val(OPT_D, D_AGSIZE));
+ set_conf_val(OPT_D, D_AGCOUNT,
+ get_conf_val(OPT_D, D_AGCOUNT) - 1);
+ ASSERT(get_conf_val(OPT_D, D_AGCOUNT) != 0);
}
- validate_ag_geometry(blocklog, dblocks, agsize, agcount);
+ validate_ag_geometry(get_conf_val(OPT_B, B_LOG),
+ dblocks,
+ get_conf_val(OPT_D, D_AGSIZE),
+ get_conf_val(OPT_D, D_AGCOUNT));
if (!imflag)
- imaxpct = calc_default_imaxpct(blocklog, dblocks);
+ imaxpct = calc_default_imaxpct(get_conf_val(OPT_B, B_LOG),
+ dblocks);
/*
- * check that log sunit is modulo fsblksize or default it to dsunit.
+ * check that log sunit is modulo fsblksize or default it to D_SUNIT.
*/
if (lsunit) {
/* convert from 512 byte blocks to fs blocks */
lsunit = DTOBT(lsunit);
- } else if (sb_feat.log_version == 2 && loginternal && dsunit) {
- /* lsunit and dsunit now in fs blocks */
- lsunit = dsunit;
+ } else if (sb_feat.log_version == 2 &&
+ loginternal &&
+ get_conf_val(OPT_D, D_SUNIT)) {
+ /* lsunit and get_conf_val(OPT_D, D_SUNIT) now in fs blocks */
+ lsunit = get_conf_val(OPT_D, D_SUNIT);
}
- if (sb_feat.log_version == 2 && (lsunit * blocksize) > 256 * 1024) {
+ if (sb_feat.log_version == 2 &&
+ (lsunit * get_conf_val(OPT_B, B_SIZE)) > 256 * 1024) {
/* Warn only if specified on commandline */
if (lsuflag || lsunitflag) {
fprintf(stderr,
_("log stripe unit (%"PRIu64" bytes) is too large (maximum is 256KiB)\n"),
- (lsunit * blocksize));
+ (lsunit * get_conf_val(OPT_B, B_SIZE)));
fprintf(stderr,
_("log stripe unit adjusted to 32KiB\n"));
}
- lsunit = (32 * 1024) >> blocklog;
+ lsunit = (32 * 1024) >> get_conf_val(OPT_B, B_LOG);
}
- min_logblocks = max_trans_res(agsize,
+ min_logblocks = max_trans_res(get_conf_val(OPT_D, D_AGSIZE),
sb_feat.crcs_enabled, sb_feat.dir_version,
- sectorlog, blocklog, inodelog, dirblocklog,
+ get_conf_val(OPT_D, D_SECTLOG),
+ get_conf_val(OPT_B, B_LOG),
+ inodelog, dirblocklog,
sb_feat.log_version, lsunit, sb_feat.finobt,
sb_feat.rmapbt, sb_feat.reflink);
ASSERT(min_logblocks);
min_logblocks = MAX(XFS_MIN_LOG_BLOCKS, min_logblocks);
- if (!logbytes && dblocks >= (1024*1024*1024) >> blocklog)
- min_logblocks = MAX(min_logblocks, XFS_MIN_LOG_BYTES>>blocklog);
+ if (!logbytes &&
+ dblocks >= (1024*1024*1024) >> get_conf_val(OPT_B, B_LOG))
+ min_logblocks = MAX(min_logblocks,
+ XFS_MIN_LOG_BYTES >>
+ get_conf_val(OPT_B, B_LOG));
if (logbytes && xi.logBBsize > 0 && logblocks > DTOBT(xi.logBBsize)) {
fprintf(stderr,
_("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks\n"),
@@ -2830,17 +2983,19 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
logblocks = 0;
} else if (loginternal && !logbytes) {
- if (dblocks < GIGABYTES(1, blocklog)) {
+ if (dblocks < GIGABYTES(1, get_conf_val(OPT_B, B_LOG))) {
/* tiny filesystems get minimum sized logs. */
logblocks = min_logblocks;
- } else if (dblocks < GIGABYTES(16, blocklog)) {
+ } else if (dblocks <
+ GIGABYTES(16, get_conf_val(OPT_B, B_LOG))) {
/*
* For small filesystems, we want to use the
* XFS_MIN_LOG_BYTES for filesystems smaller than 16G if
* at all possible, ramping up to 128MB at 256GB.
*/
- logblocks = MIN(XFS_MIN_LOG_BYTES >> blocklog,
+ logblocks = MIN(XFS_MIN_LOG_BYTES >>
+ get_conf_val(OPT_B, B_LOG),
min_logblocks * XFS_DFL_LOG_FACTOR);
} else {
/*
@@ -2849,34 +3004,38 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
* max log size of 128M at 256GB fs size. IOWs,
* the ratio of fs size to log size is 2048:1.
*/
- logblocks = (dblocks << blocklog) / 2048;
- logblocks = logblocks >> blocklog;
+ logblocks = (dblocks <<
+ get_conf_val(OPT_B, B_LOG)) / 2048;
+ logblocks = logblocks >> get_conf_val(OPT_B, B_LOG);
}
/* Ensure the chosen size meets minimum log size requirements */
logblocks = MAX(min_logblocks, logblocks);
/* make sure the log fits wholly within an AG */
- if (logblocks >= agsize)
+ if (logblocks >= get_conf_val(OPT_D, D_AGSIZE))
logblocks = min_logblocks;
/* and now clamp the size to the maximum supported size */
logblocks = MIN(logblocks, XFS_MAX_LOG_BLOCKS);
- if ((logblocks << blocklog) > XFS_MAX_LOG_BYTES)
- logblocks = XFS_MAX_LOG_BYTES >> blocklog;
+ if ((logblocks << get_conf_val(OPT_B, B_LOG)) >
+ XFS_MAX_LOG_BYTES)
+ logblocks = XFS_MAX_LOG_BYTES >>
+ get_conf_val(OPT_B, B_LOG);
}
- validate_log_size(logblocks, blocklog, min_logblocks);
+ validate_log_size(logblocks, get_conf_val(OPT_B, B_LOG), min_logblocks);
protostring = setup_proto(protofile);
- bsize = 1 << (blocklog - BBSHIFT);
+ bsize = 1 << (get_conf_val(OPT_B, B_LOG) - BBSHIFT);
mp = &mbuf;
sbp = &mp->m_sb;
memset(mp, 0, sizeof(xfs_mount_t));
- sbp->sb_blocklog = (__uint8_t)blocklog;
- sbp->sb_sectlog = (__uint8_t)sectorlog;
- sbp->sb_agblklog = (__uint8_t)libxfs_log2_roundup((unsigned int)agsize);
- sbp->sb_agblocks = (xfs_agblock_t)agsize;
+ sbp->sb_blocklog = (__uint8_t)get_conf_val(OPT_B, B_LOG);
+ sbp->sb_sectlog = (__uint8_t)get_conf_val(OPT_D, D_SECTLOG);
+ sbp->sb_agblklog = (__uint8_t)libxfs_log2_roundup(
+ (unsigned int)get_conf_val(OPT_D, D_AGSIZE));
+ sbp->sb_agblocks = (xfs_agblock_t)get_conf_val(OPT_D, D_AGSIZE);
mp->m_blkbb_log = sbp->sb_blocklog - BBSHIFT;
mp->m_sectbb_log = sbp->sb_sectlog - BBSHIFT;
@@ -2884,7 +3043,10 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
* sb_versionnum, finobt and rmapbt flags must be set before we use
* libxfs_prealloc_blocks().
*/
- sb_set_features(&mp->m_sb, &sb_feat, sectorsize, lsectorsize, dsunit);
+ sb_set_features(&mp->m_sb, &sb_feat,
+ get_conf_val(OPT_D, D_SECTSIZE),
+ lsectorsize,
+ get_conf_val(OPT_D, D_SUNIT));
if (loginternal) {
@@ -2897,9 +3059,12 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
libxfs_alloc_ag_max_usable(mp));
/* revalidate the log size is valid if we changed it */
- validate_log_size(logblocks, blocklog, min_logblocks);
+ validate_log_size(logblocks,
+ get_conf_val(OPT_B, B_LOG),
+ min_logblocks);
}
- if (logblocks > agsize - libxfs_prealloc_blocks(mp)) {
+ if (logblocks > get_conf_val(OPT_D, D_AGSIZE) -
+ libxfs_prealloc_blocks(mp)) {
fprintf(stderr,
_("internal log size %"PRIu64" too large, must fit in allocation group\n"),
logblocks);
@@ -2907,14 +3072,16 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
}
if (laflag) {
- if (logagno >= agcount) {
+ if (logagno >= get_conf_val(OPT_D, D_AGCOUNT)) {
fprintf(stderr,
_("log ag number %d too large, must be less than %"PRIu64"\n"),
- logagno, agcount);
+ logagno,
+ get_conf_val(OPT_D, D_AGCOUNT));
usage();
}
} else
- logagno = (xfs_agnumber_t)(agcount / 2);
+ logagno = (xfs_agnumber_t)(
+ get_conf_val(OPT_D, D_AGCOUNT) / 2);
logstart = XFS_AGB_TO_FSB(mp, logagno, libxfs_prealloc_blocks(mp));
/*
@@ -2922,20 +3089,25 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
*/
if (lsunit) {
logstart = fixup_internal_log_stripe(mp,
- lsflag, logstart, agsize, lsunit,
- &logblocks, blocklog, &lalign);
- } else if (dsunit) {
+ lsflag, logstart,
+ get_conf_val(OPT_D, D_AGSIZE), lsunit,
+ &logblocks,
+ get_conf_val(OPT_B, B_LOG), &lalign);
+ } else if (get_conf_val(OPT_D, D_SUNIT)) {
logstart = fixup_internal_log_stripe(mp,
- lsflag, logstart, agsize, dsunit,
- &logblocks, blocklog, &lalign);
+ lsflag, logstart,
+ get_conf_val(OPT_D, D_AGSIZE),
+ get_conf_val(OPT_D, D_SUNIT),
+ &logblocks,
+ get_conf_val(OPT_B, B_LOG), &lalign);
}
} else {
logstart = 0;
if (lsunit)
fixup_log_stripe_unit(lsflag, lsunit,
- &logblocks, blocklog);
+ &logblocks, get_conf_val(OPT_B, B_LOG));
}
- validate_log_size(logblocks, blocklog, min_logblocks);
+ validate_log_size(logblocks, get_conf_val(OPT_B, B_LOG), min_logblocks);
if (!qflag || Nflag) {
printf(_(
@@ -2948,19 +3120,22 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
"log =%-22s bsize=%-6d blocks=%"PRIu64", version=%d\n"
" =%-22s sectsz=%-5lu sunit=%"PRIu64" blks, lazy-count=%d\n"
"realtime =%-22s extsz=%-6d blocks=%"PRIu64", rtextents=%"PRIu64"\n"),
- dfile, isize, agcount, agsize,
- "", sectorsize, sb_feat.attr_version,
+ dfile, isize, get_conf_val(OPT_D, D_AGCOUNT),
+ get_conf_val(OPT_D, D_AGSIZE),
+ "", get_conf_val(OPT_D, D_SECTSIZE),
+ sb_feat.attr_version,
!sb_feat.projid16bit,
"", sb_feat.crcs_enabled, sb_feat.finobt, sb_feat.spinodes,
sb_feat.rmapbt, sb_feat.reflink,
- "", blocksize, dblocks, imaxpct,
- "", dsunit, dswidth,
+ "", get_conf_val(OPT_B, B_SIZE), dblocks, imaxpct,
+ "", get_conf_val(OPT_D, D_SUNIT),
+ get_conf_val(OPT_D, D_SWIDTH),
sb_feat.dir_version, dirblocksize, sb_feat.nci,
sb_feat.dirftype,
- logfile, 1 << blocklog, logblocks,
+ logfile, 1 << get_conf_val(OPT_B, B_LOG), logblocks,
sb_feat.log_version, "", lsectorsize, lsunit,
sb_feat.lazy_sb_counters,
- rtfile, rtextblocks << blocklog,
+ rtfile, rtextblocks << get_conf_val(OPT_B, B_LOG),
rtblocks, rtextents);
if (Nflag)
exit(0);
@@ -2969,7 +3144,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
if (label)
strncpy(sbp->sb_fname, label, sizeof(sbp->sb_fname));
sbp->sb_magicnum = XFS_SB_MAGIC;
- sbp->sb_blocksize = blocksize;
+ sbp->sb_blocksize = get_conf_val(OPT_B, B_SIZE);
sbp->sb_dblocks = dblocks;
sbp->sb_rblocks = rtblocks;
sbp->sb_rextents = rtextents;
@@ -2979,15 +3154,15 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
sbp->sb_logstart = logstart;
sbp->sb_rootino = sbp->sb_rbmino = sbp->sb_rsumino = NULLFSINO;
sbp->sb_rextsize = rtextblocks;
- sbp->sb_agcount = (xfs_agnumber_t)agcount;
+ sbp->sb_agcount = (xfs_agnumber_t)get_conf_val(OPT_D, D_AGCOUNT);
sbp->sb_rbmblocks = nbmblocks;
sbp->sb_logblocks = (xfs_extlen_t)logblocks;
- sbp->sb_sectsize = (__uint16_t)sectorsize;
+ sbp->sb_sectsize = (__uint16_t)get_conf_val(OPT_D, D_SECTSIZE);
sbp->sb_inodesize = (__uint16_t)isize;
- sbp->sb_inopblock = (__uint16_t)(blocksize / isize);
- sbp->sb_sectlog = (__uint8_t)sectorlog;
+ sbp->sb_inopblock = (__uint16_t)(get_conf_val(OPT_B, B_SIZE) / isize);
+ sbp->sb_sectlog = (__uint8_t)get_conf_val(OPT_D, D_SECTLOG);
sbp->sb_inodelog = (__uint8_t)inodelog;
- sbp->sb_inopblog = (__uint8_t)(blocklog - inodelog);
+ sbp->sb_inopblog = (__uint8_t)(get_conf_val(OPT_B, B_LOG) - inodelog);
sbp->sb_rextslog =
(__uint8_t)(rtextents ?
libxfs_highbit32((unsigned int)rtextents) : 0);
@@ -2995,14 +3170,15 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
sbp->sb_imax_pct = imaxpct;
sbp->sb_icount = 0;
sbp->sb_ifree = 0;
- sbp->sb_fdblocks = dblocks - agcount * libxfs_prealloc_blocks(mp) -
+ sbp->sb_fdblocks = dblocks -
+ get_conf_val(OPT_D, D_AGCOUNT) * libxfs_prealloc_blocks(mp) -
(loginternal ? logblocks : 0);
sbp->sb_frextents = 0; /* will do a free later */
sbp->sb_uquotino = sbp->sb_gquotino = sbp->sb_pquotino = 0;
sbp->sb_qflags = 0;
- sbp->sb_unit = dsunit;
- sbp->sb_width = dswidth;
- sbp->sb_dirblklog = dirblocklog - blocklog;
+ sbp->sb_unit = get_conf_val(OPT_D, D_SUNIT);
+ sbp->sb_width = get_conf_val(OPT_D, D_SWIDTH);
+ sbp->sb_dirblklog = dirblocklog - get_conf_val(OPT_B, B_LOG);
if (sb_feat.log_version == 2) { /* This is stored in bytes */
lsunit = (lsunit == 0) ? 1 : XFS_FSB_TO_B(mp, lsunit);
sbp->sb_logsunit = lsunit;
@@ -3012,11 +3188,12 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
int cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;
if (sb_feat.crcs_enabled)
cluster_size *= isize / XFS_DINODE_MIN_SIZE;
- sbp->sb_inoalignmt = cluster_size >> blocklog;
+ sbp->sb_inoalignmt = cluster_size >> get_conf_val(OPT_B, B_LOG);
sb_feat.inode_align = sbp->sb_inoalignmt != 0;
} else
sbp->sb_inoalignmt = 0;
- if (lsectorsize != BBSIZE || sectorsize != BBSIZE) {
+ if (lsectorsize != BBSIZE ||
+ get_conf_val(OPT_D, D_SECTSIZE) != BBSIZE) {
sbp->sb_logsectlog = (__uint8_t)lsectorlog;
sbp->sb_logsectsize = (__uint16_t)lsectorsize;
} else {
@@ -3024,7 +3201,10 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
sbp->sb_logsectsize = 0;
}
- sb_set_features(&mp->m_sb, &sb_feat, sectorsize, lsectorsize, dsunit);
+ sb_set_features(&mp->m_sb, &sb_feat,
+ get_conf_val(OPT_D, D_SECTSIZE),
+ lsectorsize,
+ get_conf_val(OPT_D, D_SUNIT));
if (force_overwrite)
zero_old_xfs_structures(&xi, sbp);
@@ -3044,7 +3224,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
/* OK, now write the superblock */
buf = libxfs_getbuf(mp->m_ddev_targp, XFS_SB_DADDR, XFS_FSS_TO_BB(mp, 1));
buf->b_ops = &xfs_sb_buf_ops;
- memset(XFS_BUF_PTR(buf), 0, sectorsize);
+ memset(XFS_BUF_PTR(buf), 0, get_conf_val(OPT_D, D_SECTSIZE));
libxfs_sb_to_disk((void *)XFS_BUF_PTR(buf), sbp);
libxfs_writebuf(buf, LIBXFS_EXIT_ON_FAILURE);
libxfs_purgebuf(buf);
@@ -3054,8 +3234,10 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
* if needed so that the reads for the end of the device in the mount
* code will succeed.
*/
- if (xi.disfile && xi.dsize * xi.dbsize < dblocks * blocksize) {
- if (ftruncate(xi.dfd, dblocks * blocksize) < 0) {
+ if (xi.disfile &&
+ xi.dsize * xi.dbsize < dblocks * get_conf_val(OPT_B, B_SIZE)) {
+ if (ftruncate(xi.dfd,
+ dblocks * get_conf_val(OPT_B, B_SIZE)) < 0) {
fprintf(stderr,
_("%s: Growing the data section failed\n"),
progname);
@@ -3097,7 +3279,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
* These initialisations should be pulled into libxfs to keep the
* kernel/userspace header initialisation code the same.
*/
- for (agno = 0; agno < agcount; agno++) {
+ for (agno = 0; agno < get_conf_val(OPT_D, D_AGCOUNT); agno++) {
struct xfs_agfl *agfl;
int bucket;
struct xfs_perag *pag = libxfs_perag_get(mp, agno);
@@ -3109,7 +3291,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
XFS_AG_DADDR(mp, agno, XFS_SB_DADDR),
XFS_FSS_TO_BB(mp, 1));
buf->b_ops = &xfs_sb_buf_ops;
- memset(XFS_BUF_PTR(buf), 0, sectorsize);
+ memset(XFS_BUF_PTR(buf), 0, get_conf_val(OPT_D, D_SECTSIZE));
libxfs_sb_to_disk((void *)XFS_BUF_PTR(buf), sbp);
libxfs_writebuf(buf, LIBXFS_EXIT_ON_FAILURE);
@@ -3121,13 +3303,17 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
XFS_FSS_TO_BB(mp, 1));
buf->b_ops = &xfs_agf_buf_ops;
agf = XFS_BUF_TO_AGF(buf);
- memset(agf, 0, sectorsize);
- if (agno == agcount - 1)
- agsize = dblocks - (xfs_rfsblock_t)(agno * agsize);
+ memset(agf, 0, get_conf_val(OPT_D, D_SECTSIZE));
+ if (agno == get_conf_val(OPT_D, D_AGCOUNT) - 1)
+ set_conf_val(OPT_D, D_AGSIZE,
+ dblocks -
+ (xfs_rfsblock_t)(agno *
+ get_conf_val(OPT_D, D_AGSIZE)));
+
agf->agf_magicnum = cpu_to_be32(XFS_AGF_MAGIC);
agf->agf_versionnum = cpu_to_be32(XFS_AGF_VERSION);
agf->agf_seqno = cpu_to_be32(agno);
- agf->agf_length = cpu_to_be32(agsize);
+ agf->agf_length = cpu_to_be32(get_conf_val(OPT_D, D_AGSIZE));
agf->agf_roots[XFS_BTNUM_BNOi] = cpu_to_be32(XFS_BNO_BLOCK(mp));
agf->agf_roots[XFS_BTNUM_CNTi] = cpu_to_be32(XFS_CNT_BLOCK(mp));
agf->agf_levels[XFS_BTNUM_BNOi] = cpu_to_be32(1);
@@ -3149,7 +3335,8 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
agf->agf_flfirst = 0;
agf->agf_fllast = cpu_to_be32(XFS_AGFL_SIZE(mp) - 1);
agf->agf_flcount = 0;
- nbmblocks = (xfs_extlen_t)(agsize - libxfs_prealloc_blocks(mp));
+ nbmblocks = (xfs_extlen_t)(get_conf_val(OPT_D, D_AGSIZE) -
+ libxfs_prealloc_blocks(mp));
agf->agf_freeblks = cpu_to_be32(nbmblocks);
agf->agf_longest = cpu_to_be32(nbmblocks);
if (xfs_sb_version_hascrc(&mp->m_sb))
@@ -3157,7 +3344,8 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
if (loginternal && agno == logagno) {
be32_add_cpu(&agf->agf_freeblks, -logblocks);
- agf->agf_longest = cpu_to_be32(agsize -
+ agf->agf_longest =
+ cpu_to_be32(get_conf_val(OPT_D, D_AGSIZE) -
XFS_FSB_TO_AGBNO(mp, logstart) - logblocks);
}
if (libxfs_alloc_min_freelist(mp, pag) > worst_freelist)
@@ -3173,7 +3361,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
buf->b_ops = &xfs_agfl_buf_ops;
agfl = XFS_BUF_TO_AGFL(buf);
/* setting to 0xff results in initialisation to NULLAGBLOCK */
- memset(agfl, 0xff, sectorsize);
+ memset(agfl, 0xff, get_conf_val(OPT_D, D_SECTSIZE));
if (xfs_sb_version_hascrc(&mp->m_sb)) {
agfl->agfl_magicnum = cpu_to_be32(XFS_AGFL_MAGIC);
agfl->agfl_seqno = cpu_to_be32(agno);
@@ -3192,11 +3380,13 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
XFS_FSS_TO_BB(mp, 1));
agi = XFS_BUF_TO_AGI(buf);
buf->b_ops = &xfs_agi_buf_ops;
- memset(agi, 0, sectorsize);
+ memset(agi, 0, get_conf_val(OPT_D, D_SECTSIZE));
agi->agi_magicnum = cpu_to_be32(XFS_AGI_MAGIC);
agi->agi_versionnum = cpu_to_be32(XFS_AGI_VERSION);
agi->agi_seqno = cpu_to_be32(agno);
- agi->agi_length = cpu_to_be32((xfs_agblock_t)agsize);
+ agi->agi_length =
+ cpu_to_be32(
+ (xfs_agblock_t)get_conf_val(OPT_D, D_AGSIZE));
agi->agi_count = 0;
agi->agi_root = cpu_to_be32(XFS_IBT_BLOCK(mp));
agi->agi_level = cpu_to_be32(1);
@@ -3221,7 +3411,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
bsize);
buf->b_ops = &xfs_allocbt_buf_ops;
block = XFS_BUF_TO_BLOCK(buf);
- memset(block, 0, blocksize);
+ memset(block, 0, get_conf_val(OPT_B, B_SIZE));
libxfs_btree_init_block(mp, buf, XFS_BTNUM_BNO, 0, 1, agno, 0);
arec = XFS_ALLOC_REC_ADDR(mp, block, 1);
@@ -3256,7 +3446,8 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
* so, reset the record count to 0 to avoid exposure of an invalid
* record start block.
*/
- arec->ar_blockcount = cpu_to_be32(agsize -
+ arec->ar_blockcount =
+ cpu_to_be32(get_conf_val(OPT_D, D_AGSIZE) -
be32_to_cpu(arec->ar_startblock));
if (!arec->ar_blockcount)
block->bb_numrecs = 0;
@@ -3271,7 +3462,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
bsize);
buf->b_ops = &xfs_allocbt_buf_ops;
block = XFS_BUF_TO_BLOCK(buf);
- memset(block, 0, blocksize);
+ memset(block, 0, get_conf_val(OPT_B, B_SIZE));
libxfs_btree_init_block(mp, buf, XFS_BTNUM_CNT, 0, 1, agno, 0);
arec = XFS_ALLOC_REC_ADDR(mp, block, 1);
@@ -3296,7 +3487,8 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
* so, reset the record count to 0 to avoid exposure of an invalid
* record start block.
*/
- arec->ar_blockcount = cpu_to_be32(agsize -
+ arec->ar_blockcount =
+ cpu_to_be32(get_conf_val(OPT_D, D_AGSIZE) -
be32_to_cpu(arec->ar_startblock));
if (!arec->ar_blockcount)
block->bb_numrecs = 0;
@@ -3314,7 +3506,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
buf->b_ops = &xfs_refcountbt_buf_ops;
block = XFS_BUF_TO_BLOCK(buf);
- memset(block, 0, blocksize);
+ memset(block, 0, get_conf_val(OPT_B, B_SIZE));
libxfs_btree_init_block(mp, buf, XFS_BTNUM_REFC, 0,
0, agno, 0);
@@ -3329,7 +3521,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
bsize);
buf->b_ops = &xfs_inobt_buf_ops;
block = XFS_BUF_TO_BLOCK(buf);
- memset(block, 0, blocksize);
+ memset(block, 0, get_conf_val(OPT_B, B_SIZE));
libxfs_btree_init_block(mp, buf, XFS_BTNUM_INO, 0, 0, agno, 0);
libxfs_writebuf(buf, LIBXFS_EXIT_ON_FAILURE);
@@ -3342,7 +3534,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
bsize);
buf->b_ops = &xfs_inobt_buf_ops;
block = XFS_BUF_TO_BLOCK(buf);
- memset(block, 0, blocksize);
+ memset(block, 0, get_conf_val(OPT_B, B_SIZE));
libxfs_btree_init_block(mp, buf, XFS_BTNUM_FINO, 0, 0, agno, 0);
libxfs_writebuf(buf, LIBXFS_EXIT_ON_FAILURE);
}
@@ -3356,7 +3548,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
bsize);
buf->b_ops = &xfs_rmapbt_buf_ops;
block = XFS_BUF_TO_BLOCK(buf);
- memset(block, 0, blocksize);
+ memset(block, 0, get_conf_val(OPT_B, B_SIZE));
libxfs_btree_init_block(mp, buf, XFS_BTNUM_RMAP, 0, 0, agno, 0);
@@ -3432,7 +3624,7 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
*/
buf = libxfs_getbuf(mp->m_ddev_targp,
(xfs_daddr_t)XFS_FSB_TO_BB(mp, dblocks - 1LL), bsize);
- memset(XFS_BUF_PTR(buf), 0, blocksize);
+ memset(XFS_BUF_PTR(buf), 0, get_conf_val(OPT_B, B_SIZE));
libxfs_writebuf(buf, LIBXFS_EXIT_ON_FAILURE);
/*
@@ -3441,14 +3633,14 @@ _("size %s specified for log subvolume is too large, maximum is %"PRIu64" blocks
if (mp->m_rtdev_targp->dev && rtblocks > 0) {
buf = libxfs_getbuf(mp->m_rtdev_targp,
XFS_FSB_TO_BB(mp, rtblocks - 1LL), bsize);
- memset(XFS_BUF_PTR(buf), 0, blocksize);
+ memset(XFS_BUF_PTR(buf), 0, get_conf_val(OPT_B, B_SIZE));
libxfs_writebuf(buf, LIBXFS_EXIT_ON_FAILURE);
}
/*
* BNO, CNT free block list
*/
- for (agno = 0; agno < agcount; agno++) {
+ for (agno = 0; agno < get_conf_val(OPT_D, D_AGCOUNT); agno++) {
xfs_alloc_arg_t args;
xfs_trans_t *tp;
struct xfs_trans_res tres = {0};
--
2.1.4
next prev parent reply other threads:[~2017-04-23 18:55 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-23 18:54 [PATCH 00/12] mkfs: save user input into opts table Jan Tulak
2017-04-23 18:54 ` [PATCH 01/12] mkfs: Save raw user input field to the opts struct Jan Tulak
2017-04-25 17:38 ` Eric Sandeen
2017-04-23 18:54 ` [PATCH 02/12] mkfs: rename defaultval to flagval in opts Jan Tulak
2017-04-25 16:52 ` Eric Sandeen
2017-04-26 7:30 ` Jan Tulak
2017-04-26 13:02 ` Eric Sandeen
2017-04-26 13:20 ` Jan Tulak
2017-04-23 18:54 ` [PATCH 03/12] mkfs: remove intermediate getstr followed by getnum Jan Tulak
2017-04-25 17:37 ` Eric Sandeen
2017-04-26 7:40 ` Jan Tulak
2017-04-26 13:13 ` Eric Sandeen
2017-04-23 18:54 ` [PATCH 04/12] mkfs: merge tables for opts parsing into one table Jan Tulak
2017-04-25 3:04 ` Luis R. Rodriguez
2017-04-25 7:45 ` Jan Tulak
2017-04-25 13:28 ` Eric Sandeen
2017-04-26 1:38 ` Luis R. Rodriguez
2017-04-26 1:45 ` Luis R. Rodriguez
2017-04-26 2:00 ` Eric Sandeen
2017-04-26 8:01 ` Luis R. Rodriguez
2017-04-26 8:24 ` Jan Tulak
2017-04-26 8:21 ` Luis R. Rodriguez
2017-04-26 8:38 ` Jan Tulak
2017-04-25 21:45 ` Eric Sandeen
2017-04-26 4:09 ` Eric Sandeen
2017-04-26 8:14 ` Jan Tulak
2017-04-23 18:54 ` [PATCH 05/12] mkfs: extend opt_params with a value field Jan Tulak
2017-04-25 3:13 ` Luis R. Rodriguez
2017-04-25 8:04 ` Jan Tulak
2017-04-25 9:39 ` Jan Tulak
2017-04-26 1:04 ` Luis R. Rodriguez
2017-04-26 8:51 ` Jan Tulak
2017-04-26 1:10 ` Luis R. Rodriguez
2017-04-26 2:50 ` Eric Sandeen
2017-04-26 8:52 ` Jan Tulak
2017-04-23 18:54 ` [PATCH 06/12] mkfs: create get/set functions for opts table Jan Tulak
2017-04-25 3:40 ` Luis R. Rodriguez
2017-04-25 8:11 ` Jan Tulak
2017-04-26 1:43 ` Luis R. Rodriguez
2017-04-23 18:54 ` [PATCH 07/12] mkfs: save user input values into opts Jan Tulak
2017-04-25 5:19 ` Luis R. Rodriguez
2017-04-25 8:16 ` Jan Tulak
2017-04-26 1:47 ` Luis R. Rodriguez
2017-04-23 18:54 ` Jan Tulak [this message]
2017-04-25 5:27 ` [PATCH 08/12] mkfs: replace variables with opts table: -b,d,s options Luis R. Rodriguez
2017-04-25 5:30 ` Luis R. Rodriguez
2017-04-25 8:37 ` Jan Tulak
2017-04-26 0:45 ` Luis R. Rodriguez
2017-04-26 9:09 ` Jan Tulak
2017-04-23 18:55 ` [PATCH 09/12] mkfs: replace variables with opts table: -i options Jan Tulak
2017-04-23 18:55 ` [PATCH 10/12] mkfs: replace variables with opts table: -l options Jan Tulak
2017-04-23 18:55 ` [PATCH 11/12] mkfs: replace variables with opts table: -n options Jan Tulak
2017-04-23 18:55 ` [PATCH 12/12] mkfs: replace variables with opts table: -r options Jan Tulak
2017-04-25 2:52 ` [PATCH 00/12] mkfs: save user input into opts table Luis R. Rodriguez
2017-04-25 16:20 ` Eric Sandeen
2017-04-26 2:02 ` Luis R. Rodriguez
2017-04-26 2:17 ` Eric Sandeen
2017-06-28 16:18 ` Luis R. Rodriguez
2017-06-29 7:56 ` Jan Tulak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170423185503.31415-9-jtulak@redhat.com \
--to=jtulak@redhat.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.