From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from out4-smtp.messagingengine.com ([66.111.4.28]:41323 "EHLO out4-smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1953173AbdDYWoA (ORCPT ); Tue, 25 Apr 2017 18:44:00 -0400 From: Mark Greer To: Samuel Ortiz Cc: linux-wireless@vger.kernel.org, linux-nfc@lists.01.org, devicetree@vger.kernel.org, Mark Greer Subject: [PATCH v5 7/9] NFC: trf7970a: Enable pins are active high not active low Date: Tue, 25 Apr 2017 15:43:54 -0700 Message-Id: <20170425224356.11498-8-mgreer@animalcreek.com> (sfid-20170426_004428_883237_4B68AE36) In-Reply-To: <20170425224356.11498-1-mgreer@animalcreek.com> References: <20170425224356.11498-1-mgreer@animalcreek.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: The example DTS code for the trf7970a sets the GPIOs for the EN and EN2 pins to active low when they are really active high so correct the error. Acked-by: Rob Herring Signed-off-by: Mark Greer --- Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 57cb52c94783..a24a93a4b010 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -36,8 +36,8 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): spi-max-frequency = <2000000>; interrupt-parent = <&gpio2>; interrupts = <14 0>; - ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, - <&gpio2 5 GPIO_ACTIVE_LOW>; + ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>, + <&gpio2 5 GPIO_ACTIVE_HIGH>; vin-supply = <&ldo3_reg>; vdd-io-supply = <&ldo2_reg>; autosuspend-delay = <30000>; -- 2.12.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Greer Subject: [PATCH v5 7/9] NFC: trf7970a: Enable pins are active high not active low Date: Tue, 25 Apr 2017 15:43:54 -0700 Message-ID: <20170425224356.11498-8-mgreer@animalcreek.com> References: <20170425224356.11498-1-mgreer@animalcreek.com> Return-path: In-Reply-To: <20170425224356.11498-1-mgreer-luAo+O/VEmrlveNOaEYElw@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Samuel Ortiz Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-nfc-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Mark Greer List-Id: devicetree@vger.kernel.org The example DTS code for the trf7970a sets the GPIOs for the EN and EN2 pins to active low when they are really active high so correct the error. Acked-by: Rob Herring Signed-off-by: Mark Greer --- Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 57cb52c94783..a24a93a4b010 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -36,8 +36,8 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): spi-max-frequency = <2000000>; interrupt-parent = <&gpio2>; interrupts = <14 0>; - ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, - <&gpio2 5 GPIO_ACTIVE_LOW>; + ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>, + <&gpio2 5 GPIO_ACTIVE_HIGH>; vin-supply = <&ldo3_reg>; vdd-io-supply = <&ldo2_reg>; autosuspend-delay = <30000>; -- 2.12.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html