From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH] ARM: dts: imx: add Gateworks Ventana GW5600 support Date: Tue, 2 May 2017 16:22:07 +0800 Message-ID: <20170502082204.GA11950@dragon> References: <1492197481-16638-1-git-send-email-tharvey@gateworks.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1492197481-16638-1-git-send-email-tharvey-UMMOYl/HMS+akBO8gow8eQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Tim Harvey Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Fri, Apr 14, 2017 at 12:18:01PM -0700, Tim Harvey wrote: > The Gateworks Ventana GW5600 is a media-centric single-board computer based on > the NXP IMX6 SoC with the following features: > * PoE (emulated 802.3af) > * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) > * 1GiB DDR3 DRAM (supports up to 4GiB) > * 8GB eMMC > * 1x microSD connector > * Gateworks System Controller: > - hardware watchdog > - hardware monitor > - pushbutton controller > - EEPROM storage > - power control > * 1x bi-color USER LED > * 1x front-panel pushbutton > * 1x front-panel GbE > * 2x front panel USB 2.0 > * 1x front panel USB OTG > * 1x SIM socket > * 1x miniPCIe socket with SATA (mSATA) > * 1x miniPCIe socket with USB 2.0 (Modem) > * 1x miniPCIe socket with PCIe, USB 2.0, and SIM > * RS232/RS485 serial > - 2x RS232 UARTs (off-board connector) > - 1x RS485 (loading option) > * 4x digital I/O signals (PWM/I2C/GPIO/5V/3.3V options) > * 1x analog input (0 to 5V) > * 1x CAN (loading option) > * off-board LVDS: > - I2C > - 12V > - LED driver (4x 330mA strings) > - matrix keypad controller (8row x 10col) > - I2S > - dual-channel LVDS > - PWM > * off-board video input: > - 16bit parallel / MIPI (IPU1_CSI0) > * GPS (loading option) > * Analog Video Input (CVBS) 3 inputs (1 active at a time) > * Analog Audio Input/Output (2ch Line level, optional MIC/HP drivers) > * HDMI out > * JTAG programmable > * Inertial Module > > Signed-off-by: Tim Harvey > --- > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/imx6dl-gw560x.dts | 55 +++ > arch/arm/boot/dts/imx6q-gw560x.dts | 59 +++ > arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 761 ++++++++++++++++++++++++++++++++++ > 4 files changed, 877 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-gw560x.dts > create mode 100644 arch/arm/boot/dts/imx6q-gw560x.dts > create mode 100644 arch/arm/boot/dts/imx6qdl-gw560x.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 0bff8e7..0c9cfbb 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -352,6 +352,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6dl-gw551x.dtb \ > imx6dl-gw552x.dtb \ > imx6dl-gw553x.dtb \ > + imx6dl-gw560x.dtb \ > imx6dl-gw5903.dtb \ > imx6dl-gw5904.dtb \ > imx6dl-hummingboard.dtb \ > @@ -397,6 +398,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6q-gw551x.dtb \ > imx6q-gw552x.dtb \ > imx6q-gw553x.dtb \ > + imx6q-gw560x.dtb \ > imx6q-gw5903.dtb \ > imx6q-gw5904.dtb \ > imx6q-h100.dtb \ > diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts > new file mode 100644 > index 0000000..21bdfaf > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-gw560x.dts > @@ -0,0 +1,55 @@ > +/* > + * Copyright 2017 Gateworks Corporation > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this file; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "imx6dl.dtsi" > +#include "imx6qdl-gw560x.dtsi" > + > +/ { > + model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X"; > + compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl"; > +}; > diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts > new file mode 100644 > index 0000000..735f2bb > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-gw560x.dts > @@ -0,0 +1,59 @@ > +/* > + * Copyright 2017 Gateworks Corporation > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this file; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "imx6q.dtsi" > +#include "imx6qdl-gw560x.dtsi" > + > +/ { > + model = "Gateworks Ventana i.MX6 Dual/Quad GW560X"; > + compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q"; > +}; > + > +&sata { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi > new file mode 100644 > index 0000000..dc52b87 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi > @@ -0,0 +1,761 @@ > +/* > + * Copyright 2017 Gateworks Corporation > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this file; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include > + > +/ { > + /* these are used by bootloader for disabling nodes */ > + aliases { > + led0 = &led0; > + led1 = &led1; > + led2 = &led2; > + ssi0 = &ssi1; > + usb0 = &usbh1; > + usb1 = &usbotg; > + }; > + > + chosen { > + stdout-path = &uart2; > + }; > + > + backlight_display { Can we consistently use hyphen instead of underscore in node name? > + compatible = "pwm-backlight"; > + pwms = <&pwm4 0 5000000>; > + brightness-levels = < > + 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100 > + >; > + default-brightness-level = <100>; > + }; > + > + backlight_keypad { Ditto > + compatible = "gpio-backlight"; > + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; > + default-on; > + }; > + > + clocks { > + codec_osc: codec_osc { I cannot find how this fixed clock is used/referenced. > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <12000000>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_leds>; > + > + led0: user1 { > + label = "user1"; > + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ > + default-state = "on"; > + linux,default-trigger = "heartbeat"; > + }; > + > + led1: user2 { > + label = "user2"; > + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ > + default-state = "off"; > + }; > + > + led2: user3 { > + label = "user3"; > + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ > + default-state = "off"; > + }; > + }; > + > + memory { memory@10000000 > + reg = <0x10000000 0x40000000>; > + }; > + > + pps { > + compatible = "pps-gpio"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pps>; > + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; > + }; > + > + reg_2p5v: regulator-2p5v { > + compatible = "regulator-fixed"; > + regulator-name = "2P5V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_5p0v: regulator-5p0v { > + compatible = "regulator-fixed"; > + regulator-name = "5P0V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_12p0v: regulator-12p0v { > + compatible = "regulator-fixed"; > + regulator-name = "12P0V"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_1p4v: regulator-vddsoc { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_soc"; > + regulator-min-microvolt = <1400000>; > + regulator-max-microvolt = <1400000>; > + regulator-always-on; > + }; > + > + reg_usb_h1_vbus: regulator-usb-h1-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb_h1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_usb_otg_vbus: regulator-usb-otg-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb_otg_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + sound { > + compatible = "fsl,imx6q-ventana-sgtl5000", > + "fsl,imx-audio-sgtl5000"; > + model = "sgtl5000-audio"; > + ssi-controller = <&ssi1>; > + audio-codec = <&sgtl5000>; > + audio-routing = > + "MIC_IN", "Mic Jack", > + "Mic Jack", "Mic Bias", > + "Headphone Jack", "HP_OUT"; > + mux-int-port = <1>; > + mux-ext-port = <4>; > + }; > +}; > + > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux>; > + status = "okay"; > +}; > + > +&ecspi3 { > + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi3>; > + status = "okay"; > +}; > + > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan>; > + status = "okay"; > +}; > + > +&clks { > + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, > + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; > + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, > + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rgmii-id"; > + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&i2c3>; > + status = "okay"; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + eeprom1: eeprom@50 { > + compatible = "atmel,24c02"; > + reg = <0x50>; > + pagesize = <16>; > + }; > + > + eeprom2: eeprom@51 { > + compatible = "atmel,24c02"; > + reg = <0x51>; > + pagesize = <16>; > + }; > + > + eeprom3: eeprom@52 { > + compatible = "atmel,24c02"; > + reg = <0x52>; > + pagesize = <16>; > + }; > + > + eeprom4: eeprom@53 { > + compatible = "atmel,24c02"; > + reg = <0x53>; > + pagesize = <16>; > + }; > + > + pca9555: gpio@23 { > + compatible = "nxp,pca9555"; > + reg = <0x23>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + ds1672: rtc@68 { > + compatible = "dallas,ds1672"; > + reg = <0x68>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + sgtl5000: codec@0a { Drop the leading zero in unit-address. > + compatible = "fsl,sgtl5000"; > + reg = <0x0a>; > + clocks = <&clks IMX6QDL_CLK_CKO>; > + VDDA-supply = <®_1p8v>; > + VDDIO-supply = <®_3p3v>; > + }; > + > + tca8418: keypad@34 { > + compatible = "ti,tca8418"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_keypad>; > + reg = <0x34>; > + interrupt-parent = <&gpio5>; > + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > + linux,keymap = <0x00010100 /* BTN_0 HOME */ > + 0x00000101 /* BTN_1 MENU */ > + 0x01010102 /* BTN_2 ESCAPE */ > + 0x01000103 /* BTN_3 BACK */ > + 0x02000104 /* BTN_4 SEARCH */ > + 0x00030105 /* BTN_5 UP */ > + 0x00020106 /* BTN_6 RIGHT */ > + 0x01030107 /* BTN_7 LEFT */ > + 0x01020108 /* BTN_8 DOWN */ > + 0x02020109>; /* BTN_9 ENTER */ Please use MATRIX_KEY() and defines in linux-event-codes.h, so that we can save the comments. > + keypad,num-rows = <4>; > + keypad,num-columns = <4>; > + }; > + > + ltc3676: pmic@3c { > + compatible = "lltc,ltc3676"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pmic>; > + reg = <0x3c>; > + interrupt-parent = <&gpio1>; > + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; > + > + regulators { > + /* VDD_DDR (1+R1/R2 = 2.105) */ > + reg_vdd_ddr: sw2 { > + regulator-name = "vddddr"; > + regulator-min-microvolt = <868310>; > + regulator-max-microvolt = <1684000>; > + lltc,fb-voltage-divider = <221000 200000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_ARM (1+R1/R2 = 1.931) */ > + reg_vdd_arm: sw3 { > + regulator-name = "vddarm"; > + regulator-min-microvolt = <796551>; > + regulator-max-microvolt = <1544827>; > + lltc,fb-voltage-divider = <243000 261000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + linux,phandle = <®_vdd_arm>; > + }; > + > + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ > + reg_1p8v: sw4 { > + regulator-name = "vdd1p8"; > + regulator-min-microvolt = <1033310>; > + regulator-max-microvolt = <2004000>; > + lltc,fb-voltage-divider = <301000 200000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */ > + reg_1p0v: ldo2 { > + regulator-name = "vdd1p0"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1050000>; > + lltc,fb-voltage-divider = <78700 200000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_AUD_1P8: Audio codec */ > + reg_aud_1p8v: ldo3 { > + regulator-name = "vdd1p8a"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + }; > + > + /* VDD_HIGH (1+R1/R2 = 4.17) */ > + reg_3p0v: ldo4 { > + regulator-name = "vdd3p0"; > + regulator-min-microvolt = <3023250>; > + regulator-max-microvolt = <3023250>; > + lltc,fb-voltage-divider = <634000 200000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + egalax_ts: touchscreen@04 { Drop the leading zero in unit-address. > + compatible = "eeti,egalax_ts"; > + reg = <0x04>; > + interrupt-parent = <&gpio5>; > + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; > + wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; > + }; > +}; > + > +&ldb { > + fsl,dual-channel; > + status = "okay"; > + > + lvds-channel@0 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <18>; > + status = "okay"; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: hsd100pxn1 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <220>; > + hfront-porch = <40>; > + vback-porch = <21>; > + vfront-porch = <7>; > + hsync-len = <60>; > + vsync-len = <10>; > + }; > + }; > + }; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie>; > + reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ > + status = "disabled"; > +}; > + > +&pwm3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ > + status = "disabled"; > +}; > + > +&pwm4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm4>; > + status = "okay"; > +}; > + > +&ssi1 { > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + uart-has-rtscts; > + rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&uart5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart5>; > + status = "okay"; > +}; > + > +&usbotg { > + vbus-supply = <®_usb_otg_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg>; > + disable-over-current; > + status = "okay"; > +}; > + > +&usbh1 { > + vbus-supply = <®_usb_h1_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbh1>; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + bus-width = <8>; > + vmmc-supply = <®_3p3v>; > + non-removable; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; > + vmmc-supply = <®_3p3v>; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > +}; > + > +&iomuxc { > + imx6qdl-gw560x { Drop this container node. > + pinctrl_audmux: audmuxgrp { > + fsl,pins = < > + /* AUD4 */ > + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 > + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 > + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 > + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 > + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ > + /* AUD6 */ > + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0 > + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 > + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 > + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 > + >; > + }; > + > + pinctrl_ecspi3: escpi3grp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 > + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 > + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 > + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 > + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ > + >; > + }; > + > + pinctrl_flexcan: flexcangrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 > + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ > + >; > + }; > + > + pinctrl_gpio_leds: gpioledsgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 > + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_usbh1: usbh1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* USBHUB_RST# */ > + >; > + }; Please sort the pinctrl nodes alphabetically. > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_pmic: pmicgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + Drop this newline. > + /* Misc */ > + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x4001b0b0 /* DIOI2C_DIS# */ > + Ditto Shawn > + /* Backlight / Touch Connector */ > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0001b0b0 /* LVDS_TOUCH_IRQ# */ > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0001b0b0 /* LVDS_BACKEN */ > + >; > + }; > + > + pinctrl_keypad: keypadgrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ > + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x0001b0b0 /* KEYPAD_LED_EN */ > + >; > + }; > + > + pinctrl_pcie: pciegrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */ > + >; > + }; > + > + pinctrl_pps: ppsgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm3: pwm3grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm4: pwm4grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 > + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart5: uart5grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 > + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 > + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ > + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 > + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x170f9 > + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x170f9 > + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x170f9 > + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x170f9 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ > + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 > + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ > + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 > + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ > + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 > + >; > + }; > + }; > +}; > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawnguo@kernel.org (Shawn Guo) Date: Tue, 2 May 2017 16:22:07 +0800 Subject: [PATCH] ARM: dts: imx: add Gateworks Ventana GW5600 support In-Reply-To: <1492197481-16638-1-git-send-email-tharvey@gateworks.com> References: <1492197481-16638-1-git-send-email-tharvey@gateworks.com> Message-ID: <20170502082204.GA11950@dragon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Apr 14, 2017 at 12:18:01PM -0700, Tim Harvey wrote: > The Gateworks Ventana GW5600 is a media-centric single-board computer based on > the NXP IMX6 SoC with the following features: > * PoE (emulated 802.3af) > * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) > * 1GiB DDR3 DRAM (supports up to 4GiB) > * 8GB eMMC > * 1x microSD connector > * Gateworks System Controller: > - hardware watchdog > - hardware monitor > - pushbutton controller > - EEPROM storage > - power control > * 1x bi-color USER LED > * 1x front-panel pushbutton > * 1x front-panel GbE > * 2x front panel USB 2.0 > * 1x front panel USB OTG > * 1x SIM socket > * 1x miniPCIe socket with SATA (mSATA) > * 1x miniPCIe socket with USB 2.0 (Modem) > * 1x miniPCIe socket with PCIe, USB 2.0, and SIM > * RS232/RS485 serial > - 2x RS232 UARTs (off-board connector) > - 1x RS485 (loading option) > * 4x digital I/O signals (PWM/I2C/GPIO/5V/3.3V options) > * 1x analog input (0 to 5V) > * 1x CAN (loading option) > * off-board LVDS: > - I2C > - 12V > - LED driver (4x 330mA strings) > - matrix keypad controller (8row x 10col) > - I2S > - dual-channel LVDS > - PWM > * off-board video input: > - 16bit parallel / MIPI (IPU1_CSI0) > * GPS (loading option) > * Analog Video Input (CVBS) 3 inputs (1 active at a time) > * Analog Audio Input/Output (2ch Line level, optional MIC/HP drivers) > * HDMI out > * JTAG programmable > * Inertial Module > > Signed-off-by: Tim Harvey > --- > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/imx6dl-gw560x.dts | 55 +++ > arch/arm/boot/dts/imx6q-gw560x.dts | 59 +++ > arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 761 ++++++++++++++++++++++++++++++++++ > 4 files changed, 877 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-gw560x.dts > create mode 100644 arch/arm/boot/dts/imx6q-gw560x.dts > create mode 100644 arch/arm/boot/dts/imx6qdl-gw560x.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 0bff8e7..0c9cfbb 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -352,6 +352,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6dl-gw551x.dtb \ > imx6dl-gw552x.dtb \ > imx6dl-gw553x.dtb \ > + imx6dl-gw560x.dtb \ > imx6dl-gw5903.dtb \ > imx6dl-gw5904.dtb \ > imx6dl-hummingboard.dtb \ > @@ -397,6 +398,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6q-gw551x.dtb \ > imx6q-gw552x.dtb \ > imx6q-gw553x.dtb \ > + imx6q-gw560x.dtb \ > imx6q-gw5903.dtb \ > imx6q-gw5904.dtb \ > imx6q-h100.dtb \ > diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts > new file mode 100644 > index 0000000..21bdfaf > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-gw560x.dts > @@ -0,0 +1,55 @@ > +/* > + * Copyright 2017 Gateworks Corporation > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this file; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "imx6dl.dtsi" > +#include "imx6qdl-gw560x.dtsi" > + > +/ { > + model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X"; > + compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl"; > +}; > diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts > new file mode 100644 > index 0000000..735f2bb > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-gw560x.dts > @@ -0,0 +1,59 @@ > +/* > + * Copyright 2017 Gateworks Corporation > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this file; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "imx6q.dtsi" > +#include "imx6qdl-gw560x.dtsi" > + > +/ { > + model = "Gateworks Ventana i.MX6 Dual/Quad GW560X"; > + compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q"; > +}; > + > +&sata { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi > new file mode 100644 > index 0000000..dc52b87 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi > @@ -0,0 +1,761 @@ > +/* > + * Copyright 2017 Gateworks Corporation > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this file; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include > + > +/ { > + /* these are used by bootloader for disabling nodes */ > + aliases { > + led0 = &led0; > + led1 = &led1; > + led2 = &led2; > + ssi0 = &ssi1; > + usb0 = &usbh1; > + usb1 = &usbotg; > + }; > + > + chosen { > + stdout-path = &uart2; > + }; > + > + backlight_display { Can we consistently use hyphen instead of underscore in node name? > + compatible = "pwm-backlight"; > + pwms = <&pwm4 0 5000000>; > + brightness-levels = < > + 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100 > + >; > + default-brightness-level = <100>; > + }; > + > + backlight_keypad { Ditto > + compatible = "gpio-backlight"; > + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; > + default-on; > + }; > + > + clocks { > + codec_osc: codec_osc { I cannot find how this fixed clock is used/referenced. > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <12000000>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_leds>; > + > + led0: user1 { > + label = "user1"; > + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ > + default-state = "on"; > + linux,default-trigger = "heartbeat"; > + }; > + > + led1: user2 { > + label = "user2"; > + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ > + default-state = "off"; > + }; > + > + led2: user3 { > + label = "user3"; > + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ > + default-state = "off"; > + }; > + }; > + > + memory { memory at 10000000 > + reg = <0x10000000 0x40000000>; > + }; > + > + pps { > + compatible = "pps-gpio"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pps>; > + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; > + }; > + > + reg_2p5v: regulator-2p5v { > + compatible = "regulator-fixed"; > + regulator-name = "2P5V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_5p0v: regulator-5p0v { > + compatible = "regulator-fixed"; > + regulator-name = "5P0V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_12p0v: regulator-12p0v { > + compatible = "regulator-fixed"; > + regulator-name = "12P0V"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_1p4v: regulator-vddsoc { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_soc"; > + regulator-min-microvolt = <1400000>; > + regulator-max-microvolt = <1400000>; > + regulator-always-on; > + }; > + > + reg_usb_h1_vbus: regulator-usb-h1-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb_h1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_usb_otg_vbus: regulator-usb-otg-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb_otg_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + sound { > + compatible = "fsl,imx6q-ventana-sgtl5000", > + "fsl,imx-audio-sgtl5000"; > + model = "sgtl5000-audio"; > + ssi-controller = <&ssi1>; > + audio-codec = <&sgtl5000>; > + audio-routing = > + "MIC_IN", "Mic Jack", > + "Mic Jack", "Mic Bias", > + "Headphone Jack", "HP_OUT"; > + mux-int-port = <1>; > + mux-ext-port = <4>; > + }; > +}; > + > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux>; > + status = "okay"; > +}; > + > +&ecspi3 { > + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi3>; > + status = "okay"; > +}; > + > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan>; > + status = "okay"; > +}; > + > +&clks { > + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, > + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; > + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, > + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rgmii-id"; > + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&i2c3>; > + status = "okay"; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + eeprom1: eeprom at 50 { > + compatible = "atmel,24c02"; > + reg = <0x50>; > + pagesize = <16>; > + }; > + > + eeprom2: eeprom at 51 { > + compatible = "atmel,24c02"; > + reg = <0x51>; > + pagesize = <16>; > + }; > + > + eeprom3: eeprom at 52 { > + compatible = "atmel,24c02"; > + reg = <0x52>; > + pagesize = <16>; > + }; > + > + eeprom4: eeprom at 53 { > + compatible = "atmel,24c02"; > + reg = <0x53>; > + pagesize = <16>; > + }; > + > + pca9555: gpio at 23 { > + compatible = "nxp,pca9555"; > + reg = <0x23>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + ds1672: rtc at 68 { > + compatible = "dallas,ds1672"; > + reg = <0x68>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + sgtl5000: codec at 0a { Drop the leading zero in unit-address. > + compatible = "fsl,sgtl5000"; > + reg = <0x0a>; > + clocks = <&clks IMX6QDL_CLK_CKO>; > + VDDA-supply = <®_1p8v>; > + VDDIO-supply = <®_3p3v>; > + }; > + > + tca8418: keypad at 34 { > + compatible = "ti,tca8418"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_keypad>; > + reg = <0x34>; > + interrupt-parent = <&gpio5>; > + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > + linux,keymap = <0x00010100 /* BTN_0 HOME */ > + 0x00000101 /* BTN_1 MENU */ > + 0x01010102 /* BTN_2 ESCAPE */ > + 0x01000103 /* BTN_3 BACK */ > + 0x02000104 /* BTN_4 SEARCH */ > + 0x00030105 /* BTN_5 UP */ > + 0x00020106 /* BTN_6 RIGHT */ > + 0x01030107 /* BTN_7 LEFT */ > + 0x01020108 /* BTN_8 DOWN */ > + 0x02020109>; /* BTN_9 ENTER */ Please use MATRIX_KEY() and defines in linux-event-codes.h, so that we can save the comments. > + keypad,num-rows = <4>; > + keypad,num-columns = <4>; > + }; > + > + ltc3676: pmic at 3c { > + compatible = "lltc,ltc3676"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pmic>; > + reg = <0x3c>; > + interrupt-parent = <&gpio1>; > + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; > + > + regulators { > + /* VDD_DDR (1+R1/R2 = 2.105) */ > + reg_vdd_ddr: sw2 { > + regulator-name = "vddddr"; > + regulator-min-microvolt = <868310>; > + regulator-max-microvolt = <1684000>; > + lltc,fb-voltage-divider = <221000 200000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_ARM (1+R1/R2 = 1.931) */ > + reg_vdd_arm: sw3 { > + regulator-name = "vddarm"; > + regulator-min-microvolt = <796551>; > + regulator-max-microvolt = <1544827>; > + lltc,fb-voltage-divider = <243000 261000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + linux,phandle = <®_vdd_arm>; > + }; > + > + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ > + reg_1p8v: sw4 { > + regulator-name = "vdd1p8"; > + regulator-min-microvolt = <1033310>; > + regulator-max-microvolt = <2004000>; > + lltc,fb-voltage-divider = <301000 200000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */ > + reg_1p0v: ldo2 { > + regulator-name = "vdd1p0"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1050000>; > + lltc,fb-voltage-divider = <78700 200000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_AUD_1P8: Audio codec */ > + reg_aud_1p8v: ldo3 { > + regulator-name = "vdd1p8a"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + }; > + > + /* VDD_HIGH (1+R1/R2 = 4.17) */ > + reg_3p0v: ldo4 { > + regulator-name = "vdd3p0"; > + regulator-min-microvolt = <3023250>; > + regulator-max-microvolt = <3023250>; > + lltc,fb-voltage-divider = <634000 200000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + egalax_ts: touchscreen at 04 { Drop the leading zero in unit-address. > + compatible = "eeti,egalax_ts"; > + reg = <0x04>; > + interrupt-parent = <&gpio5>; > + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; > + wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; > + }; > +}; > + > +&ldb { > + fsl,dual-channel; > + status = "okay"; > + > + lvds-channel at 0 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <18>; > + status = "okay"; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: hsd100pxn1 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <220>; > + hfront-porch = <40>; > + vback-porch = <21>; > + vfront-porch = <7>; > + hsync-len = <60>; > + vsync-len = <10>; > + }; > + }; > + }; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie>; > + reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ > + status = "disabled"; > +}; > + > +&pwm3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ > + status = "disabled"; > +}; > + > +&pwm4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm4>; > + status = "okay"; > +}; > + > +&ssi1 { > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + uart-has-rtscts; > + rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&uart5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart5>; > + status = "okay"; > +}; > + > +&usbotg { > + vbus-supply = <®_usb_otg_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg>; > + disable-over-current; > + status = "okay"; > +}; > + > +&usbh1 { > + vbus-supply = <®_usb_h1_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbh1>; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + bus-width = <8>; > + vmmc-supply = <®_3p3v>; > + non-removable; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; > + vmmc-supply = <®_3p3v>; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > +}; > + > +&iomuxc { > + imx6qdl-gw560x { Drop this container node. > + pinctrl_audmux: audmuxgrp { > + fsl,pins = < > + /* AUD4 */ > + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 > + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 > + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 > + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 > + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ > + /* AUD6 */ > + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0 > + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 > + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 > + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 > + >; > + }; > + > + pinctrl_ecspi3: escpi3grp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 > + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 > + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 > + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 > + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ > + >; > + }; > + > + pinctrl_flexcan: flexcangrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 > + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ > + >; > + }; > + > + pinctrl_gpio_leds: gpioledsgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 > + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_usbh1: usbh1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* USBHUB_RST# */ > + >; > + }; Please sort the pinctrl nodes alphabetically. > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_pmic: pmicgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + Drop this newline. > + /* Misc */ > + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x4001b0b0 /* DIOI2C_DIS# */ > + Ditto Shawn > + /* Backlight / Touch Connector */ > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0001b0b0 /* LVDS_TOUCH_IRQ# */ > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0001b0b0 /* LVDS_BACKEN */ > + >; > + }; > + > + pinctrl_keypad: keypadgrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ > + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x0001b0b0 /* KEYPAD_LED_EN */ > + >; > + }; > + > + pinctrl_pcie: pciegrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */ > + >; > + }; > + > + pinctrl_pps: ppsgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm3: pwm3grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm4: pwm4grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 > + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart5: uart5grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 > + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 > + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ > + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 > + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x170f9 > + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x170f9 > + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x170f9 > + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x170f9 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ > + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 > + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ > + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 > + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ > + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 > + >; > + }; > + }; > +}; > -- > 2.7.4 >