From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752554AbdECDJ7 (ORCPT ); Tue, 2 May 2017 23:09:59 -0400 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:43286 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751118AbdECDJd (ORCPT ); Tue, 2 May 2017 23:09:33 -0400 From: Chen-Yu Tsai To: Maxime Ripard , Michael Turquette , Stephen Boyd , Rob Herring , Mark Rutland Cc: Chen-Yu Tsai , linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: [PATCH v2 0/8] clk: sunxi-ng: Add support for A83T CCU Date: Wed, 3 May 2017 11:09:21 +0800 Message-Id: <20170503030929.28763-1-wens@csie.org> X-Mailer: git-send-email 2.11.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi everyone, This is v2 of my A83T CCU series. This is for 4.13. Changes since v1: - Dropped two patches that were merged - Added clk core flag to disable caching of clock phases - Added support for multiple variable pre-dividers - Merged "pll-periph-ahb1" pre-divider clock into "ahb1" clock with multiple variable pre-dividers - Introduced new class of phase clocks that return -ENOTSUPP when the clock is in new timing mode - Force mmc2 clock to new timing mode - Added back mmc2 output and sample clocks - Fixed bit ops for forcing audio PLL configuration - Added requirement for "losc" clock in device tree binding - Stripped leading 0 in device node name - Updated subject prefixes for various patches Patch 1 adds a compatible string for the A83T CCU to the sunxi-ccu bindings. Patch 2 adds a CLK_GET_PHASE_NOCACHE flag to the clk core, asking it not to cache clock phase values. This is similar to CLK_GET_RATE_NOCACHE. Patch 5 has a compile time dependency on this patch, for the flag value. Patch 3 adds a new class of phase clocks that check the new timing mode bit, and returns an error if it is set, which indicates the phase delays no longer apply. This is a clean way to signal which timing mode the mmc clock is in, without using any custom functions or callbacks. We don't support runtime switching of modes. Patch 4 adds support for multiple variable pre-dividers to the sunxi-ng mux class. Patch 5 adds the driver for the A83T CCU. Patch 6 adds the CCU device nodes, and fixes up any existing clock phandles in the dtsi, without using the macros. Patch 7 sets the clock accuracy for the main oscillator. Patch 8 is for the next -rc2, switch the clock indices from raw numbers to macros we introduced with the driver. This will be updated if more peripherals are introduced in the same cycle. Let me know what you think. Cover letter excerpt from v1: This is yet another series that adds support for the A83T CCU. The A83T CCU has a mix of new styled (like the A80) clocks at old (like A3x) offsets. Some differences include: - D1/D2 style PLL clocks - divisible audio module clocks - new timing mode for mmc2 module clock Regards ChenYu Chen-Yu Tsai (8): dt-bindings: clock: sunxi-ccu: Add compatible string for A83T CCU clk: Provide option to query hardware for clk phase clk: sunxi-ng: Add class of phase clocks supporting MMC new timing modes clk: sunxi-ng: Support multiple variable pre-dividers clk: sunxi-ng: Add driver for A83T CCU ARM: sun8i: a83t: Add CCU device nodes ARM: sun8i: a83t: Set clock accuracy for 24MHz oscillator ARM: sun8i: a83t: Switch to CCU device tree binding macros .../devicetree/bindings/clock/sunxi-ccu.txt | 2 + arch/arm/boot/dts/sun8i-a83t.dtsi | 19 +- drivers/clk/clk.c | 6 +- drivers/clk/sunxi-ng/Kconfig | 10 + drivers/clk/sunxi-ng/Makefile | 1 + drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 10 +- drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 911 +++++++++++++++++++++ drivers/clk/sunxi-ng/ccu-sun8i-a83t.h | 64 ++ drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-r.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 10 +- drivers/clk/sunxi-ng/ccu_mux.c | 15 +- drivers/clk/sunxi-ng/ccu_mux.h | 13 +- drivers/clk/sunxi-ng/ccu_phase.c | 47 ++ drivers/clk/sunxi-ng/ccu_phase.h | 16 + include/dt-bindings/clock/sun8i-a83t-ccu.h | 140 ++++ include/dt-bindings/reset/sun8i-a83t-ccu.h | 98 +++ include/linux/clk-provider.h | 1 + 21 files changed, 1363 insertions(+), 50 deletions(-) create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.h create mode 100644 include/dt-bindings/clock/sun8i-a83t-ccu.h create mode 100644 include/dt-bindings/reset/sun8i-a83t-ccu.h -- 2.11.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Wed, 3 May 2017 11:09:21 +0800 Subject: [PATCH v2 0/8] clk: sunxi-ng: Add support for A83T CCU Message-ID: <20170503030929.28763-1-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi everyone, This is v2 of my A83T CCU series. This is for 4.13. Changes since v1: - Dropped two patches that were merged - Added clk core flag to disable caching of clock phases - Added support for multiple variable pre-dividers - Merged "pll-periph-ahb1" pre-divider clock into "ahb1" clock with multiple variable pre-dividers - Introduced new class of phase clocks that return -ENOTSUPP when the clock is in new timing mode - Force mmc2 clock to new timing mode - Added back mmc2 output and sample clocks - Fixed bit ops for forcing audio PLL configuration - Added requirement for "losc" clock in device tree binding - Stripped leading 0 in device node name - Updated subject prefixes for various patches Patch 1 adds a compatible string for the A83T CCU to the sunxi-ccu bindings. Patch 2 adds a CLK_GET_PHASE_NOCACHE flag to the clk core, asking it not to cache clock phase values. This is similar to CLK_GET_RATE_NOCACHE. Patch 5 has a compile time dependency on this patch, for the flag value. Patch 3 adds a new class of phase clocks that check the new timing mode bit, and returns an error if it is set, which indicates the phase delays no longer apply. This is a clean way to signal which timing mode the mmc clock is in, without using any custom functions or callbacks. We don't support runtime switching of modes. Patch 4 adds support for multiple variable pre-dividers to the sunxi-ng mux class. Patch 5 adds the driver for the A83T CCU. Patch 6 adds the CCU device nodes, and fixes up any existing clock phandles in the dtsi, without using the macros. Patch 7 sets the clock accuracy for the main oscillator. Patch 8 is for the next -rc2, switch the clock indices from raw numbers to macros we introduced with the driver. This will be updated if more peripherals are introduced in the same cycle. Let me know what you think. Cover letter excerpt from v1: This is yet another series that adds support for the A83T CCU. The A83T CCU has a mix of new styled (like the A80) clocks at old (like A3x) offsets. Some differences include: - D1/D2 style PLL clocks - divisible audio module clocks - new timing mode for mmc2 module clock Regards ChenYu Chen-Yu Tsai (8): dt-bindings: clock: sunxi-ccu: Add compatible string for A83T CCU clk: Provide option to query hardware for clk phase clk: sunxi-ng: Add class of phase clocks supporting MMC new timing modes clk: sunxi-ng: Support multiple variable pre-dividers clk: sunxi-ng: Add driver for A83T CCU ARM: sun8i: a83t: Add CCU device nodes ARM: sun8i: a83t: Set clock accuracy for 24MHz oscillator ARM: sun8i: a83t: Switch to CCU device tree binding macros .../devicetree/bindings/clock/sunxi-ccu.txt | 2 + arch/arm/boot/dts/sun8i-a83t.dtsi | 19 +- drivers/clk/clk.c | 6 +- drivers/clk/sunxi-ng/Kconfig | 10 + drivers/clk/sunxi-ng/Makefile | 1 + drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 10 +- drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 911 +++++++++++++++++++++ drivers/clk/sunxi-ng/ccu-sun8i-a83t.h | 64 ++ drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-r.c | 10 +- drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 10 +- drivers/clk/sunxi-ng/ccu_mux.c | 15 +- drivers/clk/sunxi-ng/ccu_mux.h | 13 +- drivers/clk/sunxi-ng/ccu_phase.c | 47 ++ drivers/clk/sunxi-ng/ccu_phase.h | 16 + include/dt-bindings/clock/sun8i-a83t-ccu.h | 140 ++++ include/dt-bindings/reset/sun8i-a83t-ccu.h | 98 +++ include/linux/clk-provider.h | 1 + 21 files changed, 1363 insertions(+), 50 deletions(-) create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.h create mode 100644 include/dt-bindings/clock/sun8i-a83t-ccu.h create mode 100644 include/dt-bindings/reset/sun8i-a83t-ccu.h -- 2.11.0