From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peng Fan <van.freenix@gmail.com>
Date: Tue, 9 May 2017 10:36:08 +0800
Subject: [U-Boot] [PATCH 05/17] mx6slevk: Fix unused variable warning
In-Reply-To: <1494296075-29477-5-git-send-email-trini@konsulko.com>
References: <1494296075-29477-1-git-send-email-trini@konsulko.com>
 <1494296075-29477-5-git-send-email-trini@konsulko.com>
Message-ID: <20170509023606.GA28300@linux-7smt.suse>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, May 08, 2017 at 10:14:23PM -0400, Tom Rini wrote:
>The variable usdhc1_pads is only referenced during SPL builds, add a
>guard.
>
>Cc: Fabio Estevam <fabio.estevam@nxp.com>
>Cc: Peng Fan <peng.fan@nxp.com>
>Cc: Stefano Babic <sbabic@denx.de>
>Signed-off-by: Tom Rini <trini@konsulko.com>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

>---
> board/freescale/mx6slevk/mx6slevk.c | 2 ++
> 1 file changed, 2 insertions(+)
>
>diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
>index d49543315b92..228514b106a8 100644
>--- a/board/freescale/mx6slevk/mx6slevk.c
>+++ b/board/freescale/mx6slevk/mx6slevk.c
>@@ -66,6 +66,7 @@ static iomux_v3_cfg_t const uart1_pads[] = {
> 	MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
> };
> 
>+#ifdef CONFIG_SPL_BUILD
> static iomux_v3_cfg_t const usdhc1_pads[] = {
> 	/* 8 bit SD */
> 	MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
>@@ -106,6 +107,7 @@ static iomux_v3_cfg_t const usdhc3_pads[] = {
> 	/*CD pin*/
> 	MX6_PAD_REF_CLK_32K__GPIO_3_22 | MUX_PAD_CTRL(NO_PAD_CTRL),
> };
>+#endif
> 
> static iomux_v3_cfg_t const fec_pads[] = {
> 	MX6_PAD_FEC_MDC__FEC_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
>-- 
>1.9.1
>
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>https://lists.denx.de/listinfo/u-boot