All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michał Kępień" <kernel@kempniu.pl>
To: Jonathan Woithe <jwoithe@just42.net>,
	Darren Hart <dvhart@infradead.org>,
	Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/8] platform/x86: fujitsu-laptop: allocate struct fujitsu_bl in acpi_fujitsu_bl_add()
Date: Fri, 19 May 2017 09:44:42 +0200	[thread overview]
Message-ID: <20170519074448.12716-3-kernel@kempniu.pl> (raw)
In-Reply-To: <20170519074448.12716-1-kernel@kempniu.pl>

Only allocate memory for struct fujitsu_bl when the FUJ02B1 ACPI device
is present.  Use devm_kzalloc() for allocating memory to simplify
cleanup.

Due to the fact that the power property of the backlight device created
by the backlight driver is accessed from acpi_fujitsu_laptop_add(),
pointer to the allocated memory will remain stored in a module-wide
variable until the backlight driver is extracted into a separate module.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
---
 drivers/platform/x86/fujitsu-laptop.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 024ef339179a..63a9b98967fa 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -392,6 +392,7 @@ static int fujitsu_backlight_register(struct acpi_device *device)
 
 static int acpi_fujitsu_bl_add(struct acpi_device *device)
 {
+	struct fujitsu_bl *priv;
 	int state = 0;
 	int error;
 
@@ -401,10 +402,15 @@ static int acpi_fujitsu_bl_add(struct acpi_device *device)
 	if (!device)
 		return -EINVAL;
 
+	priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	fujitsu_bl = priv;
 	fujitsu_bl->acpi_handle = device->handle;
 	sprintf(acpi_device_name(device), "%s", ACPI_FUJITSU_BL_DEVICE_NAME);
 	sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
-	device->driver_data = fujitsu_bl;
+	device->driver_data = priv;
 
 	error = acpi_fujitsu_bl_input_setup(device);
 	if (error)
@@ -837,7 +843,7 @@ static int acpi_fujitsu_laptop_add(struct acpi_device *device)
 	pr_info("BTNI: [0x%x]\n", call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0));
 
 	/* Sync backlight power status */
-	if (fujitsu_bl->bl_device &&
+	if (fujitsu_bl && fujitsu_bl->bl_device &&
 	    acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		if (call_fext_func(FUNC_BACKLIGHT, 0x2, 0x4, 0x0) == 3)
 			fujitsu_bl->bl_device->props.power = FB_BLANK_POWERDOWN;
@@ -995,13 +1001,9 @@ static int __init fujitsu_init(void)
 	if (acpi_disabled)
 		return -ENODEV;
 
-	fujitsu_bl = kzalloc(sizeof(struct fujitsu_bl), GFP_KERNEL);
-	if (!fujitsu_bl)
-		return -ENOMEM;
-
 	ret = acpi_bus_register_driver(&acpi_fujitsu_bl_driver);
 	if (ret)
-		goto err_free_fujitsu_bl;
+		return ret;
 
 	/* Register platform stuff */
 
@@ -1031,8 +1033,6 @@ static int __init fujitsu_init(void)
 	platform_driver_unregister(&fujitsu_pf_driver);
 err_unregister_acpi:
 	acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver);
-err_free_fujitsu_bl:
-	kfree(fujitsu_bl);
 
 	return ret;
 }
@@ -1047,8 +1047,6 @@ static void __exit fujitsu_cleanup(void)
 
 	acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver);
 
-	kfree(fujitsu_bl);
-
 	pr_info("driver unloaded\n");
 }
 
-- 
2.13.0

  parent reply	other threads:[~2017-05-19  7:45 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-19  7:44 [PATCH v2 0/8] fujitsu-laptop: use device-specific data instead of module-wide globals Michał Kępień
2017-05-19  7:44 ` [PATCH v2 1/8] platform/x86: fujitsu-laptop: distinguish current uses of device-specific data Michał Kępień
2017-05-19  7:44 ` Michał Kępień [this message]
2017-05-19  7:44 ` [PATCH v2 3/8] platform/x86: fujitsu-laptop: use device-specific data in backlight code Michał Kępień
2017-05-19  7:44 ` [PATCH v2 4/8] platform/x86: fujitsu-laptop: allocate struct fujitsu_laptop in acpi_fujitsu_laptop_add() Michał Kępień
2017-05-19  7:44 ` [PATCH v2 5/8] platform/x86: fujitsu-laptop: track the last instantiated FUJ02E3 ACPI device Michał Kępień
2017-05-21 23:18   ` Jonathan Woithe
2017-05-23 21:47     ` Michał Kępień
2017-05-23 23:53       ` Jonathan Woithe
2017-05-19  7:44 ` [PATCH v2 6/8] platform/x86: fujitsu-laptop: explicitly pass ACPI device to call_fext_func() Michał Kępień
2017-05-19  7:44 ` [PATCH v2 7/8] platform/x86: fujitsu-laptop: use device-specific data in LED-related code Michał Kępień
2017-05-19  7:44 ` [PATCH v2 8/8] platform/x86: fujitsu-laptop: use device-specific data in remaining module code Michał Kępień
2017-05-21 23:23 ` [PATCH v2 0/8] fujitsu-laptop: use device-specific data instead of module-wide globals Jonathan Woithe
2017-05-24  0:00   ` Jonathan Woithe
2017-06-03 19:06     ` Darren Hart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170519074448.12716-3-kernel@kempniu.pl \
    --to=kernel@kempniu.pl \
    --cc=andy@infradead.org \
    --cc=dvhart@infradead.org \
    --cc=jwoithe@just42.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.