Hi,

On Thu, May 18, 2017 at 08:40:35PM -0700, Tony Lindgren wrote:
> This is no longer needed as the real problem was interrupt flags
> not getting passed properly from device tree to the cpcap-core.c
> mfd driver. This got fixed with commit ac89473213c6 ("mfd: cpcap:
> Fix interrupt to use level interrupt") So let's remove ADC
> interrupt specific the quirk.
> 
> Cc: Marcel Partap <mpartap-hi6Y0CQ0nG0@public.gmane.org>
> Cc: Michael Scott <michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Reviewed-by: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

-- Sebastian

> ---
>  drivers/iio/adc/cpcap-adc.c | 24 +-----------------------
>  1 file changed, 1 insertion(+), 23 deletions(-)
> 
> diff --git a/drivers/iio/adc/cpcap-adc.c b/drivers/iio/adc/cpcap-adc.c
> --- a/drivers/iio/adc/cpcap-adc.c
> +++ b/drivers/iio/adc/cpcap-adc.c
> @@ -89,7 +89,7 @@
>  #define ST_ADC_CAL_BATTI_LOW_THRESHOLD	494
>  #define ST_ADC_CALIBRATE_DIFF_THRESHOLD	3
>  
> -#define CPCAP_ADC_MAX_RETRIES		5	/* Calibration and quirk */
> +#define CPCAP_ADC_MAX_RETRIES		5	/* Calibration */
>  
>  /**
>   * struct cpcap_adc_ato - timing settings for cpcap adc
> @@ -635,27 +635,6 @@ static void cpcap_adc_setup_bank(struct cpcap_adc *ddata,
>  	}
>  }
>  
> -/*
> - * Occasionally the ADC does not seem to start and there will be no
> - * interrupt. Let's re-init interrupt to prevent the ADC from hanging
> - * for the next request. It is unclear why this happens, but the next
> - * request will usually work after doing this.
> - */
> -static void cpcap_adc_quirk_reset_lost_irq(struct cpcap_adc *ddata)
> -{
> -	int error;
> -
> -	dev_info(ddata->dev, "lost ADC irq, attempting to reinit\n");
> -	disable_irq(ddata->irq);
> -	error = regmap_update_bits(ddata->reg, CPCAP_REG_ADCC2,
> -				   CPCAP_BIT_ADTRIG_DIS,
> -				   CPCAP_BIT_ADTRIG_DIS);
> -	if (error)
> -		dev_warn(ddata->dev, "%s reset failed: %i\n",
> -			 __func__, error);
> -	enable_irq(ddata->irq);
> -}
> -
>  static int cpcap_adc_start_bank(struct cpcap_adc *ddata,
>  				struct cpcap_adc_request *req)
>  {
> @@ -673,7 +652,6 @@ static int cpcap_adc_start_bank(struct cpcap_adc *ddata,
>  			return 0;
>  
>  		if (error == 0) {
> -			cpcap_adc_quirk_reset_lost_irq(ddata);
>  			error = -ETIMEDOUT;
>  			continue;
>  		}
> -- 
> 2.13.0