All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tursulin@ursulin.net>
To: Intel-gfx@lists.freedesktop.org
Subject: [PATCH i-g-t] igt/gem_fence_upload: Stabilise the test for CI
Date: Wed, 31 May 2017 11:28:07 +0100	[thread overview]
Message-ID: <20170531102807.10755-1-tvrtko.ursulin@linux.intel.com> (raw)

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Most of the subtest were failing on my SKL GT2 and on the
various CI systems as well. Try to fix that by different
tweaks per subtests:

performance:

We cannot say how big the performance drop will be once the
fences are contented, just that there will be one, so modify
the assert accordingly.

thread-performance-*:

Similar to "performance", but also the peak performance to
compare against seems to be num_cpu dependant which the
biggest aggregate throughput with num_cpu clients.

Also, writes are much faster than reads which was making
the "-write" subtest a bit unstable. Increased the number
of iterations to hopefully stabilise this.

thread-contention:

Same as "performance" - we don't know how big the drop to
expect.

wc-contention:

This subtest should not expect a tiled performance drop since
CPU WC maps are under test. Change a few things:

1.
Number of iterations was to small causing result instability.

2.
There seems to be a performance valley with num_threads ==
num_cpus so do a pre-warm step in those cases which seem to fix
it.

3.
Only assert that the final step is slower than the reference,
and for the reference take the single thred result which looks
to be the fastest.

4.
Check that linear vs tiled results in each step are within
15% tolerance to verify the above attempts to stabilise the
test.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
---
 tests/gem_fence_upload.c | 51 +++++++++++++++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 18 deletions(-)

diff --git a/tests/gem_fence_upload.c b/tests/gem_fence_upload.c
index 7d9acdc0fcb3..d656d4ea70f8 100644
--- a/tests/gem_fence_upload.c
+++ b/tests/gem_fence_upload.c
@@ -103,7 +103,7 @@ static void performance(void)
 
 	errno = 0;
 	igt_assert(linear[1] > 0.75 * linear[0]);
-	igt_assert(tiled[1] > 0.75 * tiled[0]);
+	igt_assert(tiled[1] < tiled[0]);
 }
 
 struct thread_performance {
@@ -155,7 +155,8 @@ static const char *direction_string(unsigned mask)
 }
 static void thread_performance(unsigned mask)
 {
-	const int loops = 4096;
+	const int ncpus = sysconf(_SC_NPROCESSORS_ONLN);
+	const int loops = (mask & READ) ? 4096 : 32768;
 	int n, count;
 	int fd, num_fences;
 	double linear[2], tiled[2];
@@ -164,9 +165,11 @@ static void thread_performance(unsigned mask)
 
 	num_fences = gem_available_fences(fd);
 	igt_require(num_fences > 0);
+	igt_require(num_fences > ncpus);
 
 	for (count = 2; count < 4*num_fences; count *= 2) {
 		const int nthreads = (mask & READ ? count : 0) + (mask & WRITE ? count : 0);
+		const int idx = ncpus != count;
 		struct timeval start, end;
 		struct thread_performance readers[count];
 		struct thread_performance writers[count];
@@ -209,8 +212,8 @@ static void thread_performance(unsigned mask)
 		}
 		gettimeofday(&end, NULL);
 
-		linear[count != 2] = nthreads * loops / elapsed(&start, &end) / (OBJECT_SIZE / 4096);
-		igt_info("%s rate for %d linear surfaces, %d threads:	%7.3fMiB/s\n", direction_string(mask), count, nthreads, linear[count != 2]);
+		linear[idx] = nthreads * loops / elapsed(&start, &end) / (OBJECT_SIZE / 4096);
+		igt_info("%s rate for %d linear surfaces, %d threads:	%7.3fMiB/s\n", direction_string(mask), count, nthreads, linear[idx]);
 
 		for (n = 0; n < count; n++)
 			gem_set_tiling(fd, handle[n], I915_TILING_X, 1024);
@@ -230,8 +233,8 @@ static void thread_performance(unsigned mask)
 		}
 		gettimeofday(&end, NULL);
 
-		tiled[count != 2] = nthreads * loops / elapsed(&start, &end) / (OBJECT_SIZE / 4096);
-		igt_info("%s rate for %d tiled surfaces, %d threads:	%7.3fMiB/s\n", direction_string(mask), count, nthreads, tiled[count != 2]);
+		tiled[idx] = nthreads * loops / elapsed(&start, &end) / (OBJECT_SIZE / 4096);
+		igt_info("%s rate for %d tiled surfaces, %d threads:	%7.3fMiB/s\n", direction_string(mask), count, nthreads, tiled[idx]);
 
 		for (n = 0; n < count; n++) {
 			munmap(ptr[n], OBJECT_SIZE);
@@ -241,7 +244,7 @@ static void thread_performance(unsigned mask)
 
 	errno = 0;
 	igt_assert(linear[1] > 0.75 * linear[0]);
-	igt_assert(tiled[1] > 0.75 * tiled[0]);
+	igt_assert(tiled[1] < tiled[0]);
 }
 
 struct thread_contention {
@@ -329,13 +332,13 @@ static void thread_contention(void)
 
 	errno = 0;
 	igt_assert(linear[1] > 0.75 * linear[0]);
-	igt_assert(tiled[1] > 0.75 * tiled[0]);
+	igt_assert(tiled[1] < tiled[0]);
 }
 
 static void wc_contention(void)
 {
-	const int loops = 4096;
-	int n, count;
+	const int ncpus = sysconf(_SC_NPROCESSORS_ONLN);
+	int n, count, order;
 	int fd, num_fences;
 	double linear[2], tiled[2];
 
@@ -344,8 +347,13 @@ static void wc_contention(void)
 
 	num_fences = gem_available_fences(fd);
 	igt_require(num_fences > 0);
+	igt_require(num_fences > ncpus);
 
-	for (count = 1; count < 4*num_fences; count *= 2) {
+	for (count = 1, order = log2(num_fences * 2) + 1;
+	     count < 4 * num_fences;
+	     count *= 2, order--) {
+		const int loops = 4096 * order * 2;
+		const int idx = 1 != count;
 		struct timeval start, end;
 		struct thread_contention threads[count];
 
@@ -355,15 +363,20 @@ static void wc_contention(void)
 			threads[n].fd = fd;
 		}
 
+		if (count <= ncpus / 2) {
+			for (n = 0; n < count; n++)
+				pthread_create(&threads[n].thread, NULL, wc_mmap, &threads[n]);
+			for (n = 0; n < count; n++)
+				pthread_join(threads[n].thread, NULL);
+		}
 		gettimeofday(&start, NULL);
 		for (n = 0; n < count; n++)
 			pthread_create(&threads[n].thread, NULL, wc_mmap, &threads[n]);
 		for (n = 0; n < count; n++)
 			pthread_join(threads[n].thread, NULL);
 		gettimeofday(&end, NULL);
-
-		linear[count != 2] = count * loops / elapsed(&start, &end) / (OBJECT_SIZE / 4096);
-		igt_info("Contended upload rate for %d linear threads/wc:	%7.3fMiB/s\n", count, linear[count != 2]);
+		linear[idx] = count * loops / elapsed(&start, &end) / (OBJECT_SIZE / 4096);
+		igt_info("Contended upload rate for %d linear threads/wc:	%7.3fMiB/s\n", count, linear[idx]);
 
 		for (n = 0; n < count; n++)
 			gem_set_tiling(fd, threads[n].handle, I915_TILING_X, 1024);
@@ -375,17 +388,19 @@ static void wc_contention(void)
 			pthread_join(threads[n].thread, NULL);
 		gettimeofday(&end, NULL);
 
-		tiled[count != 2] = count * loops / elapsed(&start, &end) / (OBJECT_SIZE / 4096);
-		igt_info("Contended upload rate for %d tiled threads/wc:	%7.3fMiB/s\n", count, tiled[count != 2]);
+		tiled[idx] = count * loops / elapsed(&start, &end) / (OBJECT_SIZE / 4096);
+		igt_info("Contended upload rate for %d tiled threads/wc:	%7.3fMiB/s\n", count, tiled[idx]);
 
 		for (n = 0; n < count; n++) {
 			gem_close(fd, threads[n].handle);
 		}
+
+		igt_require(fabs((linear[idx] - tiled[idx]) / linear[idx]) < 0.15);
 	}
 
 	errno = 0;
-	igt_assert(linear[1] > 0.75 * linear[0]);
-	igt_assert(tiled[1] > 0.75 * tiled[0]);
+	igt_assert(linear[1] < linear[0]);
+	igt_assert(tiled[1] < tiled[0]);
 }
 
 igt_main
-- 
2.9.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2017-05-31 10:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-31 10:28 Tvrtko Ursulin [this message]
2017-05-31 12:45 ` [PATCH i-g-t] igt/gem_fence_upload: Stabilise the test for CI Chris Wilson
2017-05-31 13:30   ` Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170531102807.10755-1-tvrtko.ursulin@linux.intel.com \
    --to=tursulin@ursulin.net \
    --cc=Intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.