[PATCH linux dev-4.10 2/3] arm: aspeed: Add LPC devicetree node and children

[Andrew Jeffery <andrew@aj.id.au>]

This is enablement for mbox protocol support on P8. Expose
/dev/aspeed-lpc-ctrl and /dev/aspeed-mbox for use by mboxd.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9b0291061925..a998a00a2728 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -78,6 +78,44 @@
 			};
 		};
 
+		lpc: lpc@1e789000 {
+			compatible = "aspeed,ast2400-lpc", "simple-mfd";
+			reg = <0x1e789000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e789000 0x1000>;
+
+			lpc_bmc: lpc-bmc@0 {
+				compatible = "aspeed,ast2400-lpc-bmc";
+				reg = <0x0 0x80>;
+			};
+
+			lpc_host: lpc-host@80 {
+				compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
+				reg = <0x80 0x1e0>;
+				reg-io-width = <4>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80 0x1e0>;
+
+				lpc_ctrl: lpc-ctrl@0 {
+					compatible = "aspeed,ast2400-lpc-ctrl";
+					reg = <0x0 0x80>;
+					status = "disabled";
+				};
+
+				mbox: mbox@180 {
+					compatible = "aspeed,ast2400-mbox";
+					reg = <0x180 0x5c>;
+					interrupts = <46>;
+					#mbox-cells = <1>;
+					status = "disabled";
+				};
+			};
+		};
+
 		vic: interrupt-controller@1e6c0080 {
 			compatible = "aspeed,ast2400-vic";
 			interrupt-controller;
-- 
2.11.0