All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brendan Higgins <brendanhiggins@google.com>
To: wsa@the-dreams.de, robh+dt@kernel.org, mark.rutland@arm.com,
	tglx@linutronix.de, jason@lakedaemon.net, marc.zyngier@arm.com,
	joel@jms.id.au, vz@mleia.com, mouse@mayc.ru, clg@kaod.org,
	benh@kernel.crashing.org, ryan_chen@aspeedtech.com
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
	Brendan Higgins <brendanhiggins@google.com>
Subject: [PATCH v10 2/5] irqchip/aspeed-i2c-ic: Add I2C IRQ controller for Aspeed
Date: Fri,  2 Jun 2017 18:29:49 -0700	[thread overview]
Message-ID: <20170603012952.2192-3-brendanhiggins@google.com> (raw)
In-Reply-To: <20170603012952.2192-1-brendanhiggins@google.com>

The Aspeed 24XX/25XX chips share a single hardware interrupt across 14
separate I2C busses. This adds a dummy irqchip which maps the single
hardware interrupt to software interrupts for each of the busses.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
---
Added in v6:
  - Pulled "aspeed_i2c_controller" out into a interrupt controller since that is
    what it actually does.
Changes for v7:
  - Renamed irq domain for consistency
Changes for v8:
  - None
Changes for v9:
  - None
Changes for v10:
  - Unallocate resources on init failure
  - Changed formatting of a function call
---
 drivers/irqchip/Makefile            |   2 +-
 drivers/irqchip/irq-aspeed-i2c-ic.c | 115 ++++++++++++++++++++++++++++++++++++
 2 files changed, 116 insertions(+), 1 deletion(-)
 create mode 100644 drivers/irqchip/irq-aspeed-i2c-ic.c

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index b64c59b838a0..e067f9839b33 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -73,6 +73,6 @@ obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
 obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
 obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
-obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o
+obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
diff --git a/drivers/irqchip/irq-aspeed-i2c-ic.c b/drivers/irqchip/irq-aspeed-i2c-ic.c
new file mode 100644
index 000000000000..815b88dd18f2
--- /dev/null
+++ b/drivers/irqchip/irq-aspeed-i2c-ic.c
@@ -0,0 +1,115 @@
+/*
+ *  Aspeed 24XX/25XX I2C Interrupt Controller.
+ *
+ *  Copyright (C) 2012-2017 ASPEED Technology Inc.
+ *  Copyright 2017 IBM Corporation
+ *  Copyright 2017 Google, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+
+#define ASPEED_I2C_IC_NUM_BUS 14
+
+struct aspeed_i2c_ic {
+	void __iomem		*base;
+	int			parent_irq;
+	struct irq_domain	*irq_domain;
+};
+
+/*
+ * The aspeed chip provides a single hardware interrupt for all of the I2C
+ * busses, so we use a dummy interrupt chip to translate this single interrupt
+ * into multiple interrupts, each associated with a single I2C bus.
+ */
+static void aspeed_i2c_ic_irq_handler(struct irq_desc *desc)
+{
+	struct aspeed_i2c_ic *i2c_ic = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned long bit, status;
+	unsigned int bus_irq;
+
+	chained_irq_enter(chip, desc);
+	status = readl(i2c_ic->base);
+	for_each_set_bit(bit, &status, ASPEED_I2C_IC_NUM_BUS) {
+		bus_irq = irq_find_mapping(i2c_ic->irq_domain, bit);
+		generic_handle_irq(bus_irq);
+	}
+	chained_irq_exit(chip, desc);
+}
+
+/*
+ * Set simple handler and mark IRQ as valid. Nothing interesting to do here
+ * since we are using a dummy interrupt chip.
+ */
+static int aspeed_i2c_ic_map_irq_domain(struct irq_domain *domain,
+					unsigned int irq, irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops aspeed_i2c_ic_irq_domain_ops = {
+	.map = aspeed_i2c_ic_map_irq_domain,
+};
+
+static int __init aspeed_i2c_ic_of_init(struct device_node *node,
+					struct device_node *parent)
+{
+	struct aspeed_i2c_ic *i2c_ic;
+	int ret = 0;
+
+	i2c_ic = kzalloc(sizeof(*i2c_ic), GFP_KERNEL);
+	if (!i2c_ic)
+		return -ENOMEM;
+
+	i2c_ic->base = of_iomap(node, 0);
+	if (IS_ERR(i2c_ic->base)) {
+		ret = PTR_ERR(i2c_ic->base);
+		goto err_free_ic;
+	}
+
+	i2c_ic->parent_irq = irq_of_parse_and_map(node, 0);
+	if (i2c_ic->parent_irq < 0) {
+		ret = i2c_ic->parent_irq;
+		goto err_iounmap;
+	}
+
+	i2c_ic->irq_domain = irq_domain_add_linear(node, ASPEED_I2C_IC_NUM_BUS,
+						   &aspeed_i2c_ic_irq_domain_ops,
+						   NULL);
+	if (!i2c_ic->irq_domain) {
+		ret = -ENOMEM;
+		goto err_iounmap;
+	}
+
+	i2c_ic->irq_domain->name = "aspeed-i2c-domain";
+
+	irq_set_chained_handler_and_data(i2c_ic->parent_irq,
+					 aspeed_i2c_ic_irq_handler, i2c_ic);
+
+	pr_info("i2c controller registered, irq %d\n", i2c_ic->parent_irq);
+
+	return 0;
+
+err_iounmap:
+	iounmap(i2c_ic->base);
+err_free_ic:
+	kfree(i2c_ic);
+	return ret;
+}
+
+IRQCHIP_DECLARE(ast2400_i2c_ic, "aspeed,ast2400-i2c-ic", aspeed_i2c_ic_of_init);
+IRQCHIP_DECLARE(ast2500_i2c_ic, "aspeed,ast2500-i2c-ic", aspeed_i2c_ic_of_init);
-- 
2.13.0.506.g27d5fe0cd-goog

  parent reply	other threads:[~2017-06-03  1:31 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-03  1:29 [PATCH v10 0/5] i2c: aspeed: added driver for Aspeed I2C Brendan Higgins
2017-06-03  1:29 ` [PATCH v10 1/5] irqchip/aspeed-i2c-ic: binding docs for Aspeed I2C Interrupt Controller Brendan Higgins
2017-06-05  6:25   ` Joel Stanley
2017-06-07 11:31   ` Marc Zyngier
2017-06-03  1:29 ` Brendan Higgins [this message]
2017-06-05  4:56   ` [PATCH v10 2/5] irqchip/aspeed-i2c-ic: Add I2C IRQ controller for Aspeed Andrew Jeffery
2017-06-05  4:56     ` Andrew Jeffery
2017-06-03  1:29 ` [PATCH v10 3/5] i2c: aspeed: added documentation for Aspeed I2C driver Brendan Higgins
2017-06-05  4:40   ` Joel Stanley
2017-06-03  1:29 ` [PATCH v10 4/5] i2c: aspeed: added driver for Aspeed I2C Brendan Higgins
2017-06-05  4:40   ` Joel Stanley
2017-06-05  4:40     ` Joel Stanley
2017-06-05  5:02   ` Andrew Jeffery
2017-06-05  5:02     ` Andrew Jeffery
2017-06-15 23:42     ` Brendan Higgins
2017-06-15 23:42       ` Brendan Higgins
2017-06-19 14:13   ` Wolfram Sang
2017-06-19 14:13     ` Wolfram Sang
2017-06-19 14:21     ` Wolfram Sang
2017-06-20  0:58       ` Brendan Higgins
2017-06-20  0:58         ` Brendan Higgins
2017-06-20  7:49         ` Wolfram Sang
2017-06-20  4:02     ` Brendan Higgins
2017-06-20  4:02       ` Brendan Higgins
2017-06-03  1:29 ` [PATCH v10 5/5] i2c: aspeed: added slave support for Aspeed I2C driver Brendan Higgins
2017-06-07  6:57   ` Joel Stanley
2017-06-19 14:14   ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170603012952.2192-3-brendanhiggins@google.com \
    --to=brendanhiggins@google.com \
    --cc=benh@kernel.crashing.org \
    --cc=clg@kaod.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=joel@jms.id.au \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mouse@mayc.ru \
    --cc=openbmc@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    --cc=ryan_chen@aspeedtech.com \
    --cc=tglx@linutronix.de \
    --cc=vz@mleia.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.