All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lyude <lyude@redhat.com>
Subject: [PATCH i-g-t 1/7] tests/chamelium: Update connector state without reprobe when possible
Date: Mon, 26 Jun 2017 16:59:00 +0300	[thread overview]
Message-ID: <20170626135906.32708-1-paul.kocialkowski@linux.intel.com> (raw)

This renames the reprobe_connector function to update_connector and
ensures that full reprobe of the connector is only done when really
necessary (e.g. when changing the EDID).

A full reprobe takes time and is not required for updating the connector
state. Thus, this allows executing tests faster.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
---
 tests/chamelium.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/tests/chamelium.c b/tests/chamelium.c
index b7eaa2fa..e1f21fb8 100644
--- a/tests/chamelium.c
+++ b/tests/chamelium.c
@@ -100,13 +100,14 @@ require_connector_present(data_t *data, unsigned int type)
 }
 
 static drmModeConnection
-reprobe_connector(data_t *data, struct chamelium_port *port)
+update_connector(data_t *data, struct chamelium_port *port, bool reprobe)
 {
 	drmModeConnector *connector;
 	drmModeConnection status;
 
-	igt_debug("Reprobing %s...\n", chamelium_port_get_name(port));
-	connector = chamelium_port_get_connector(data->chamelium, port, true);
+	igt_debug("Updating %s...\n", chamelium_port_get_name(port));
+	connector = chamelium_port_get_connector(data->chamelium, port,
+						 reprobe);
 	igt_assert(connector);
 	status = connector->connection;
 
@@ -116,7 +117,7 @@ reprobe_connector(data_t *data, struct chamelium_port *port)
 
 static void
 wait_for_connector(data_t *data, struct chamelium_port *port,
-		   drmModeConnection status)
+		   drmModeConnection status, bool reprobe)
 {
 	bool finished = false;
 
@@ -129,7 +130,7 @@ wait_for_connector(data_t *data, struct chamelium_port *port,
 	 * that hpd events work in the event that hpd doesn't work on the system
 	 */
 	igt_until_timeout(HOTPLUG_TIMEOUT) {
-		if (reprobe_connector(data, port) == status) {
+		if (update_connector(data, port, reprobe) == status) {
 			finished = true;
 			return;
 		}
@@ -148,11 +149,12 @@ reset_state(data_t *data, struct chamelium_port *port)
 	chamelium_reset(data->chamelium);
 
 	if (port) {
-		wait_for_connector(data, port, DRM_MODE_DISCONNECTED);
+		wait_for_connector(data, port, DRM_MODE_DISCONNECTED, false);
 	} else {
 		for (p = 0; p < data->port_count; p++) {
 			port = data->ports[p];
-			wait_for_connector(data, port, DRM_MODE_DISCONNECTED);
+			wait_for_connector(data, port, DRM_MODE_DISCONNECTED,
+					   false);
 		}
 	}
 }
@@ -172,7 +174,7 @@ test_basic_hotplug(data_t *data, struct chamelium_port *port)
 		/* Check if we get a sysfs hotplug event */
 		chamelium_plug(data->chamelium, port);
 		igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
-		igt_assert_eq(reprobe_connector(data, port),
+		igt_assert_eq(update_connector(data, port, false),
 			      DRM_MODE_CONNECTED);
 
 		igt_flush_hotplugs(mon);
@@ -180,7 +182,7 @@ test_basic_hotplug(data_t *data, struct chamelium_port *port)
 		/* Now check if we get a hotplug from disconnection */
 		chamelium_unplug(data->chamelium, port);
 		igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
-		igt_assert_eq(reprobe_connector(data, port),
+		igt_assert_eq(update_connector(data, port, false),
 			      DRM_MODE_DISCONNECTED);
 	}
 
@@ -201,7 +203,7 @@ test_edid_read(data_t *data, struct chamelium_port *port,
 
 	chamelium_port_set_edid(data->chamelium, port, edid_id);
 	chamelium_plug(data->chamelium, port);
-	wait_for_connector(data, port, DRM_MODE_CONNECTED);
+	wait_for_connector(data, port, DRM_MODE_CONNECTED, true);
 
 	igt_assert(kmstest_get_property(data->drm_fd, connector->connector_id,
 					DRM_MODE_OBJECT_CONNECTOR, "EDID", NULL,
@@ -244,13 +246,13 @@ try_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
 
 	igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
 	if (port) {
-		igt_assert_eq(reprobe_connector(data, port), connected ?
+		igt_assert_eq(update_connector(data, port, false), connected ?
 			      DRM_MODE_DISCONNECTED : DRM_MODE_CONNECTED);
 	} else {
 		for (p = 0; p < data->port_count; p++) {
 			port = data->ports[p];
-			igt_assert_eq(reprobe_connector(data, port), connected ?
-				      DRM_MODE_DISCONNECTED :
+			igt_assert_eq(update_connector(data, port, false),
+				      connected ? DRM_MODE_DISCONNECTED :
 				      DRM_MODE_CONNECTED);
 		}
 
@@ -314,7 +316,7 @@ test_suspend_resume_edid_change(data_t *data, struct chamelium_port *port,
 	/* First plug in the port */
 	chamelium_port_set_edid(data->chamelium, port, edid_id);
 	chamelium_plug(data->chamelium, port);
-	wait_for_connector(data, port, DRM_MODE_CONNECTED);
+	wait_for_connector(data, port, DRM_MODE_CONNECTED, true);
 
 	igt_flush_hotplugs(mon);
 
@@ -349,7 +351,7 @@ prepare_output(data_t *data,
 	chamelium_port_set_edid(data->chamelium, port, data->edid_id);
 
 	chamelium_plug(data->chamelium, port);
-	wait_for_connector(data, port, DRM_MODE_CONNECTED);
+	wait_for_connector(data, port, DRM_MODE_CONNECTED, true);
 
 	igt_display_init(display, data->drm_fd);
 	output = igt_output_from_connector(display, connector);
@@ -587,7 +589,7 @@ test_hpd_without_ddc(data_t *data, struct chamelium_port *port)
 	chamelium_plug(data->chamelium, port);
 
 	igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
-	igt_assert_eq(reprobe_connector(data, port), DRM_MODE_CONNECTED);
+	igt_assert_eq(update_connector(data, port, false), DRM_MODE_CONNECTED);
 
 	igt_cleanup_hotplug(mon);
 }
-- 
2.13.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2017-06-26 14:00 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-26 13:59 Paul Kocialkowski [this message]
2017-06-26 13:59 ` [PATCH i-g-t 2/7] tests/chamelium: Check all connectors state for basic hotplug Paul Kocialkowski
2017-06-26 21:35   ` Lyude Paul
2017-06-26 13:59 ` [PATCH i-g-t 3/7] tests/chamelium: Use 50 ms delay to wait for connector change Paul Kocialkowski
2017-06-26 21:36   ` Lyude Paul
2017-06-26 13:59 ` [PATCH i-g-t 4/7] lib/igt_chamelium: Add support for configurable DUT suspend/resume delay Paul Kocialkowski
2017-06-26 14:25   ` Martin Peres
2017-06-26 14:33     ` Paul Kocialkowski
2017-06-26 15:15       ` Martin Peres
2017-06-26 21:14         ` Lyude Paul
2017-06-27  7:33         ` Paul Kocialkowski
2017-06-27  7:45           ` Paul Kocialkowski
2017-06-27 10:16             ` Paul Kocialkowski
2017-06-26 13:59 ` [PATCH i-g-t 5/7] tests/chamelium: Use " Paul Kocialkowski
2017-06-26 13:59 ` [PATCH i-g-t 6/7] tests/chamelium: Reduce the simple hotplug test toggle count for VGA Paul Kocialkowski
2017-06-26 13:59 ` [PATCH i-g-t 7/7] tests/chamelium: Disconnect connectors without extra reset Paul Kocialkowski
2017-06-26 22:17   ` Lyude Paul
2017-06-27  7:22     ` Paul Kocialkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170626135906.32708-1-paul.kocialkowski@linux.intel.com \
    --to=paul.kocialkowski@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lyude@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.