[PATCHv3 0/4] DA9052 hardware monitoring improvements

[PATCHv3 0/4] DA9052 hardware monitoring improvements

[Sebastian Reichel]

Hi,

GE Healthcare's PPD [0] uses DA9053's touchscreen pins
for hardware monitoring purposes. This adds support for
the feature and fixes a bug, which came up during
stress-testing of the driver.

[0] https://patchwork.kernel.org/patch/9809681/

Changes since PATCHv2:
 - switch from diag, to dlg, prefix
 - add/use defines for accessing bits in registers
 - provide more details in the comment above early exit
   in touchscreen driver
 - switch to da9052_group_read() to ensure MSB and LSB
   are in sync
 - move binding update into its own patch
 - rename patch

Changes since PATCHv1:
 - convert tsiref-microvolt property into proper regulator
 - drop error message for timeout
 - simplify da9052_channel_is_visible()
 - fix checkpatch warnings

-- Sebastian

Sebastian Reichel (4):
  mfd: da9052: fix manual ADC read after timed out read
  hwmon: da9052: replace S_IRUGO with 0444
  dt-bindings: mfd: da9052: support TSI as ADC
  hwmon: da9052: add support for TSI channel

 .../devicetree/bindings/mfd/da9052-i2c.txt         |   8 +
 drivers/hwmon/da9052-hwmon.c                       | 284 +++++++++++++++++++--
 drivers/input/touchscreen/da9052_tsi.c             |   9 +
 drivers/mfd/da9052-core.c                          |   2 +
 include/linux/mfd/da9052/da9052.h                  |   6 +
 include/linux/mfd/da9052/reg.h                     |  11 +-
 6 files changed, 297 insertions(+), 23 deletions(-)

-- 
2.11.0

[PATCHv3 1/4] mfd: da9052: fix manual ADC read after timed out read

[Sebastian Reichel]

It is possible that under heavy system load, the counter in the completion
struct, used for waiting for end of AD conversion, gets incremented twice.
To make sure the driver recovers from this situation, the completion struct
should be reinitialized.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
---
 drivers/mfd/da9052-core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c
index a88c2065d8ab..977418ca9117 100644
--- a/drivers/mfd/da9052-core.c
+++ b/drivers/mfd/da9052-core.c
@@ -386,6 +386,8 @@ int da9052_adc_manual_read(struct da9052 *da9052, unsigned char channel)
 
 	mutex_lock(&da9052->auxadc_lock);
 
+	reinit_completion(&da9052->done);
+
 	/* Channel gets activated on enabling the Conversion bit */
 	mux_sel = chan_mux[channel] | DA9052_ADC_MAN_MAN_CONV;
 
-- 
2.11.0

[PATCHv3 2/4] hwmon: da9052: replace S_IRUGO with 0444

[Sebastian Reichel]

Fix checkpatch warnings about S_IRUGO being less readable than
providing the permissions octal as '0444'.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
---
 drivers/hwmon/da9052-hwmon.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c
index c9832bfacfe5..708c91ac601f 100644
--- a/drivers/hwmon/da9052-hwmon.c
+++ b/drivers/hwmon/da9052-hwmon.c
@@ -196,43 +196,43 @@ static ssize_t show_label(struct device *dev,
 		       input_names[to_sensor_dev_attr(devattr)->index]);
 }
 
-static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, da9052_read_vddout, NULL,
+static SENSOR_DEVICE_ATTR(in0_input, 0444, da9052_read_vddout, NULL,
 			  DA9052_ADC_VDDOUT);
-static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL,
+static SENSOR_DEVICE_ATTR(in0_label, 0444, show_label, NULL,
 			  DA9052_ADC_VDDOUT);
-static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, da9052_read_vbat, NULL,
+static SENSOR_DEVICE_ATTR(in3_input, 0444, da9052_read_vbat, NULL,
 			  DA9052_ADC_VBAT);
-static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL,
+static SENSOR_DEVICE_ATTR(in3_label, 0444, show_label, NULL,
 			  DA9052_ADC_VBAT);
-static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, da9052_read_misc_channel, NULL,
+static SENSOR_DEVICE_ATTR(in4_input, 0444, da9052_read_misc_channel, NULL,
 			  DA9052_ADC_IN4);
-static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL,
+static SENSOR_DEVICE_ATTR(in4_label, 0444, show_label, NULL,
 			  DA9052_ADC_IN4);
-static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, da9052_read_misc_channel, NULL,
+static SENSOR_DEVICE_ATTR(in5_input, 0444, da9052_read_misc_channel, NULL,
 			  DA9052_ADC_IN5);
-static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL,
+static SENSOR_DEVICE_ATTR(in5_label, 0444, show_label, NULL,
 			  DA9052_ADC_IN5);
-static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, da9052_read_misc_channel, NULL,
+static SENSOR_DEVICE_ATTR(in6_input, 0444, da9052_read_misc_channel, NULL,
 			  DA9052_ADC_IN6);
-static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL,
+static SENSOR_DEVICE_ATTR(in6_label, 0444, show_label, NULL,
 			  DA9052_ADC_IN6);
-static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, da9052_read_vbbat, NULL,
+static SENSOR_DEVICE_ATTR(in9_input, 0444, da9052_read_vbbat, NULL,
 			  DA9052_ADC_VBBAT);
-static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL,
+static SENSOR_DEVICE_ATTR(in9_label, 0444, show_label, NULL,
 			  DA9052_ADC_VBBAT);
 
-static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, da9052_read_ich, NULL,
+static SENSOR_DEVICE_ATTR(curr1_input, 0444, da9052_read_ich, NULL,
 			  DA9052_ADC_ICH);
-static SENSOR_DEVICE_ATTR(curr1_label, S_IRUGO, show_label, NULL,
+static SENSOR_DEVICE_ATTR(curr1_label, 0444, show_label, NULL,
 			  DA9052_ADC_ICH);
 
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, da9052_read_tbat, NULL,
+static SENSOR_DEVICE_ATTR(temp2_input, 0444, da9052_read_tbat, NULL,
 			  DA9052_ADC_TBAT);
-static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
+static SENSOR_DEVICE_ATTR(temp2_label, 0444, show_label, NULL,
 			  DA9052_ADC_TBAT);
-static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, da9052_read_tjunc, NULL,
+static SENSOR_DEVICE_ATTR(temp8_input, 0444, da9052_read_tjunc, NULL,
 			  DA9052_ADC_TJUNC);
-static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO, show_label, NULL,
+static SENSOR_DEVICE_ATTR(temp8_label, 0444, show_label, NULL,
 			  DA9052_ADC_TJUNC);
 
 static struct attribute *da9052_attrs[] = {
-- 
2.11.0

[PATCHv3 3/4] dt-bindings: mfd: da9052: support TSI as ADC

[Sebastian Reichel]

DA9052 allows using the touchscreen input pins as general purpose
analogue input pin by wiring analogue inputs to X+, X-, Y+ and Y-
and providing a reference voltage at TSIREF pin.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
---
 Documentation/devicetree/bindings/mfd/da9052-i2c.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
index 9554292dc6cb..57fa74e65664 100644
--- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
+++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
@@ -4,6 +4,14 @@ Required properties:
 - compatible : Should be "dlg,da9052", "dlg,da9053-aa",
 			 "dlg,da9053-ab", or "dlg,da9053-bb"
 
+Optional properties:
+- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen
+                    input lines are used as general purpose analogue
+					input.
+- tsiref-supply: Phandle to the regulator, which provides the reference
+                 voltage for the TSIREF pin. Must be provided when the
+			     touchscreen pins are used for ADC purposes.
+
 Sub-nodes:
 - regulators : Contain the regulator nodes. The DA9052/53 regulators are
   bound using their names as listed below:
-- 
2.11.0

[PATCHv3 3/4] dt-bindings: mfd: da9052: support TSI as ADC

[Sebastian Reichel]

DA9052 allows using the touchscreen input pins as general purpose
analogue input pin by wiring analogue inputs to X+, X-, Y+ and Y-
and providing a reference voltage at TSIREF pin.

Signed-off-by: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
---
 Documentation/devicetree/bindings/mfd/da9052-i2c.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
index 9554292dc6cb..57fa74e65664 100644
--- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
+++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
@@ -4,6 +4,14 @@ Required properties:
 - compatible : Should be "dlg,da9052", "dlg,da9053-aa",
 			 "dlg,da9053-ab", or "dlg,da9053-bb"
 
+Optional properties:
+- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen
+                    input lines are used as general purpose analogue
+					input.
+- tsiref-supply: Phandle to the regulator, which provides the reference
+                 voltage for the TSIREF pin. Must be provided when the
+			     touchscreen pins are used for ADC purposes.
+
 Sub-nodes:
 - regulators : Contain the regulator nodes. The DA9052/53 regulators are
   bound using their names as listed below:
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv3 4/4] hwmon: da9052: add support for TSI channel

[Sebastian Reichel]

TSI channel has a 4 channel mux connected to it and is normally
used for touchscreen support. The hardware may alternatively
use it as general purpose adc.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
---
 drivers/hwmon/da9052-hwmon.c           | 248 ++++++++++++++++++++++++++++++++-
 drivers/input/touchscreen/da9052_tsi.c |   9 ++
 include/linux/mfd/da9052/da9052.h      |   6 +
 include/linux/mfd/da9052/reg.h         |  11 +-
 4 files changed, 269 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c
index 708c91ac601f..a986a17bcf3f 100644
--- a/drivers/hwmon/da9052-hwmon.c
+++ b/drivers/hwmon/da9052-hwmon.c
@@ -20,13 +20,19 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 
 #include <linux/mfd/da9052/da9052.h>
 #include <linux/mfd/da9052/reg.h>
+#include <linux/regulator/consumer.h>
 
 struct da9052_hwmon {
-	struct da9052	*da9052;
-	struct mutex	hwmon_lock;
+	struct da9052		*da9052;
+	struct mutex		hwmon_lock;
+	bool			tsi_as_adc;
+	int			tsiref_mv;
+	struct regulator	*tsiref;
+	struct completion	tsidone;
 };
 
 static const char * const input_names[] = {
@@ -37,6 +43,10 @@ static const char * const input_names[] = {
 	[DA9052_ADC_IN4]	=	"ADC IN4",
 	[DA9052_ADC_IN5]	=	"ADC IN5",
 	[DA9052_ADC_IN6]	=	"ADC IN6",
+	[DA9052_ADC_TSI_XP]	=	"ADC TS X+",
+	[DA9052_ADC_TSI_YP]	=	"ADC TS Y+",
+	[DA9052_ADC_TSI_XN]	=	"ADC TS X-",
+	[DA9052_ADC_TSI_YN]	=	"ADC TS Y-",
 	[DA9052_ADC_TJUNC]	=	"BATTERY JUNCTION TEMP",
 	[DA9052_ADC_VBBAT]	=	"BACK-UP BATTERY VOLTAGE",
 };
@@ -59,6 +69,11 @@ static inline int vbbat_reg_to_mv(int value)
 	return DIV_ROUND_CLOSEST(value * 5000, 1023);
 }
 
+static inline int input_tsireg_to_mv(struct da9052_hwmon *hwmon, int value)
+{
+	return DIV_ROUND_CLOSEST(value * hwmon->tsiref_mv, 1023);
+}
+
 static inline int da9052_enable_vddout_channel(struct da9052 *da9052)
 {
 	return da9052_reg_update(da9052, DA9052_ADC_CONT_REG,
@@ -154,6 +169,97 @@ static ssize_t da9052_read_misc_channel(struct device *dev,
 	return sprintf(buf, "%d\n", input_reg_to_mv(ret));
 }
 
+static int da9052_request_tsi_read(struct da9052_hwmon *hwmon, int channel)
+{
+	u8 val = DA9052_TSICONTB_TSIMAN;
+
+	switch (channel) {
+	case DA9052_ADC_TSI_XP:
+		val |= DA9052_TSICONTB_TSIMUX_XP;
+		break;
+	case DA9052_ADC_TSI_YP:
+		val |= DA9052_TSICONTB_TSIMUX_YP;
+		break;
+	case DA9052_ADC_TSI_XN:
+		val |= DA9052_TSICONTB_TSIMUX_XN;
+		break;
+	case DA9052_ADC_TSI_YN:
+		val |= DA9052_TSICONTB_TSIMUX_YN;
+		break;
+	}
+
+	return da9052_reg_write(hwmon->da9052, DA9052_TSI_CONT_B_REG, val);
+}
+
+static int da9052_get_tsi_result(struct da9052_hwmon *hwmon, int channel)
+{
+	u8 regs[3];
+	int msb, lsb, err;
+
+	/* block read to avoid separation of MSB and LSB */
+	err = da9052_group_read(hwmon->da9052, DA9052_TSI_X_MSB_REG,
+				ARRAY_SIZE(regs), regs);
+	if (err)
+		return err;
+
+	switch (channel) {
+	case DA9052_ADC_TSI_XP:
+	case DA9052_ADC_TSI_XN:
+		msb = regs[0] << DA9052_TSILSB_TSIXL_BITS;
+		lsb = regs[2] & DA9052_TSILSB_TSIXL;
+		lsb >>= DA9052_TSILSB_TSIXL_SHIFT;
+		break;
+	case DA9052_ADC_TSI_YP:
+	case DA9052_ADC_TSI_YN:
+		msb = regs[1] << DA9052_TSILSB_TSIYL_BITS;
+		lsb = regs[2] & DA9052_TSILSB_TSIYL;
+		lsb >>= DA9052_TSILSB_TSIYL_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return msb | lsb;
+}
+
+
+static ssize_t __da9052_read_tsi(struct device *dev, int channel)
+{
+	struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+	int ret;
+
+	reinit_completion(&hwmon->tsidone);
+
+	ret = da9052_request_tsi_read(hwmon, channel);
+	if (ret < 0)
+		return ret;
+
+	/* Wait for an conversion done interrupt */
+	if (!wait_for_completion_timeout(&hwmon->tsidone,
+					 msecs_to_jiffies(500)))
+		return -ETIMEDOUT;
+
+	return da9052_get_tsi_result(hwmon, channel);
+}
+
+static ssize_t da9052_read_tsi(struct device *dev,
+			       struct device_attribute *devattr,
+			       char *buf)
+{
+	struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+	int channel = to_sensor_dev_attr(devattr)->index;
+	int ret;
+
+	mutex_lock(&hwmon->hwmon_lock);
+	ret = __da9052_read_tsi(dev, channel);
+	mutex_unlock(&hwmon->hwmon_lock);
+
+	if (ret < 0)
+		return ret;
+	else
+		return sprintf(buf, "%d\n", input_tsireg_to_mv(hwmon, ret));
+}
+
 static ssize_t da9052_read_tjunc(struct device *dev,
 				 struct device_attribute *devattr, char *buf)
 {
@@ -196,6 +302,27 @@ static ssize_t show_label(struct device *dev,
 		       input_names[to_sensor_dev_attr(devattr)->index]);
 }
 
+static umode_t da9052_channel_is_visible(struct kobject *kobj,
+					 struct attribute *a, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+
+	switch (index) {
+	case DA9052_ADC_TSI_XP:
+	case DA9052_ADC_TSI_YP:
+	case DA9052_ADC_TSI_XN:
+	case DA9052_ADC_TSI_YN:
+		if (!hwmon->tsi_as_adc)
+			return 0;
+		break;
+	default:
+		break;
+	}
+
+	return a->mode;
+}
+
 static SENSOR_DEVICE_ATTR(in0_input, 0444, da9052_read_vddout, NULL,
 			  DA9052_ADC_VDDOUT);
 static SENSOR_DEVICE_ATTR(in0_label, 0444, show_label, NULL,
@@ -221,6 +348,23 @@ static SENSOR_DEVICE_ATTR(in9_input, 0444, da9052_read_vbbat, NULL,
 static SENSOR_DEVICE_ATTR(in9_label, 0444, show_label, NULL,
 			  DA9052_ADC_VBBAT);
 
+static SENSOR_DEVICE_ATTR(in70_input, 0444, da9052_read_tsi, NULL,
+			  DA9052_ADC_TSI_XP);
+static SENSOR_DEVICE_ATTR(in70_label, 0444, show_label, NULL,
+			  DA9052_ADC_TSI_XP);
+static SENSOR_DEVICE_ATTR(in71_input, 0444, da9052_read_tsi, NULL,
+			  DA9052_ADC_TSI_XN);
+static SENSOR_DEVICE_ATTR(in71_label, 0444, show_label, NULL,
+			  DA9052_ADC_TSI_XN);
+static SENSOR_DEVICE_ATTR(in72_input, 0444, da9052_read_tsi, NULL,
+			  DA9052_ADC_TSI_YP);
+static SENSOR_DEVICE_ATTR(in72_label, 0444, show_label, NULL,
+			  DA9052_ADC_TSI_YP);
+static SENSOR_DEVICE_ATTR(in73_input, 0444, da9052_read_tsi, NULL,
+			  DA9052_ADC_TSI_YN);
+static SENSOR_DEVICE_ATTR(in73_label, 0444, show_label, NULL,
+			  DA9052_ADC_TSI_YN);
+
 static SENSOR_DEVICE_ATTR(curr1_input, 0444, da9052_read_ich, NULL,
 			  DA9052_ADC_ICH);
 static SENSOR_DEVICE_ATTR(curr1_label, 0444, show_label, NULL,
@@ -246,6 +390,14 @@ static struct attribute *da9052_attrs[] = {
 	&sensor_dev_attr_in5_label.dev_attr.attr,
 	&sensor_dev_attr_in6_input.dev_attr.attr,
 	&sensor_dev_attr_in6_label.dev_attr.attr,
+	&sensor_dev_attr_in70_input.dev_attr.attr,
+	&sensor_dev_attr_in70_label.dev_attr.attr,
+	&sensor_dev_attr_in71_input.dev_attr.attr,
+	&sensor_dev_attr_in71_label.dev_attr.attr,
+	&sensor_dev_attr_in72_input.dev_attr.attr,
+	&sensor_dev_attr_in72_label.dev_attr.attr,
+	&sensor_dev_attr_in73_input.dev_attr.attr,
+	&sensor_dev_attr_in73_label.dev_attr.attr,
 	&sensor_dev_attr_in9_input.dev_attr.attr,
 	&sensor_dev_attr_in9_label.dev_attr.attr,
 	&sensor_dev_attr_curr1_input.dev_attr.attr,
@@ -257,29 +409,117 @@ static struct attribute *da9052_attrs[] = {
 	NULL
 };
 
-ATTRIBUTE_GROUPS(da9052);
+static const struct attribute_group da9052_group = {
+	.attrs = da9052_attrs,
+	.is_visible = da9052_channel_is_visible,
+};
+__ATTRIBUTE_GROUPS(da9052);
+
+static irqreturn_t da9052_tsi_datardy_irq(int irq, void *data)
+{
+	struct da9052_hwmon *hwmon = data;
+
+	complete(&hwmon->tsidone);
+	return IRQ_HANDLED;
+}
 
 static int da9052_hwmon_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct da9052_hwmon *hwmon;
 	struct device *hwmon_dev;
+	int err;
 
 	hwmon = devm_kzalloc(dev, sizeof(struct da9052_hwmon), GFP_KERNEL);
 	if (!hwmon)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, hwmon);
+
 	mutex_init(&hwmon->hwmon_lock);
 	hwmon->da9052 = dev_get_drvdata(pdev->dev.parent);
 
+	init_completion(&hwmon->tsidone);
+
+	hwmon->tsi_as_adc =
+		device_property_read_bool(pdev->dev.parent, "dlg,tsi-as-adc");
+
+	if (hwmon->tsi_as_adc) {
+		hwmon->tsiref = devm_regulator_get(pdev->dev.parent, "tsiref");
+		if (IS_ERR(hwmon->tsiref)) {
+			err = PTR_ERR(hwmon->tsiref);
+			dev_err(&pdev->dev, "failed to get tsiref: %d", err);
+			return err;
+		}
+
+		err = regulator_enable(hwmon->tsiref);
+		if (err)
+			return err;
+
+		hwmon->tsiref_mv = regulator_get_voltage(hwmon->tsiref);
+		if (hwmon->tsiref_mv < 0) {
+			err = hwmon->tsiref_mv;
+			goto exit_regulator;
+		}
+
+		/* convert from microvolt (DT) to millivolt (hwmon) */
+		hwmon->tsiref_mv /= 1000;
+
+		/* TSIREF limits from datasheet */
+		if (hwmon->tsiref_mv < 1800 || hwmon->tsiref_mv > 2600) {
+			dev_err(hwmon->da9052->dev, "invalid TSIREF voltage: %d",
+				hwmon->tsiref_mv);
+			err = -ENXIO;
+			goto exit_regulator;
+		}
+
+		/* disable touchscreen features */
+		da9052_reg_write(hwmon->da9052, DA9052_TSI_CONT_A_REG, 0x00);
+
+		err = da9052_request_irq(hwmon->da9052, DA9052_IRQ_TSIREADY,
+					 "tsiready-irq", da9052_tsi_datardy_irq,
+					 hwmon);
+		if (err) {
+			dev_err(&pdev->dev, "Failed to register TSIRDY IRQ: %d",
+				err);
+			goto exit_regulator;
+		}
+	}
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, "da9052",
 							   hwmon,
 							   da9052_groups);
-	return PTR_ERR_OR_ZERO(hwmon_dev);
+	err = PTR_ERR_OR_ZERO(hwmon_dev);
+	if (err)
+		goto exit_irq;
+
+	return 0;
+
+exit_irq:
+	if (hwmon->tsi_as_adc)
+		da9052_free_irq(hwmon->da9052, DA9052_IRQ_TSIREADY, hwmon);
+exit_regulator:
+	if (hwmon->tsiref)
+		regulator_disable(hwmon->tsiref);
+
+	return err;
+}
+
+static int da9052_hwmon_remove(struct platform_device *pdev)
+{
+	struct da9052_hwmon *hwmon = platform_get_drvdata(pdev);
+
+	if (hwmon->tsi_as_adc) {
+		da9052_free_irq(hwmon->da9052, DA9052_IRQ_TSIREADY, hwmon);
+		regulator_disable(hwmon->tsiref);
+	}
+
+	return 0;
 }
 
 static struct platform_driver da9052_hwmon_driver = {
 	.probe = da9052_hwmon_probe,
+	.remove = da9052_hwmon_remove,
 	.driver = {
 		.name = "da9052-hwmon",
 	},
diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c
index 5a013bb7bcad..b1003f69eac6 100644
--- a/drivers/input/touchscreen/da9052_tsi.c
+++ b/drivers/input/touchscreen/da9052_tsi.c
@@ -16,6 +16,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/property.h>
 
 #include <linux/mfd/da9052/reg.h>
 #include <linux/mfd/da9052/da9052.h>
@@ -238,6 +239,14 @@ static int da9052_ts_probe(struct platform_device *pdev)
 	if (!da9052)
 		return -EINVAL;
 
+	/*
+	 * Check if touchscreen pins are used are analogue input instead
+	 * of having a touchscreen connected to them. The analogue input
+	 * functionality will be provided by hwmon driver (if enabled).
+	 */
+	if (device_property_read_bool(pdev->dev.parent, "dlg,tsi-as-adc"))
+		return -ENODEV;
+
 	tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!tsi || !input_dev) {
diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h
index ce9230af09c2..ae5b663836d0 100644
--- a/include/linux/mfd/da9052/da9052.h
+++ b/include/linux/mfd/da9052/da9052.h
@@ -45,6 +45,12 @@
 #define DA9052_ADC_TJUNC	8
 #define DA9052_ADC_VBBAT	9
 
+/* TSI channel has its own 4 channel mux */
+#define DA9052_ADC_TSI_XP	70
+#define DA9052_ADC_TSI_XN	71
+#define DA9052_ADC_TSI_YP	72
+#define DA9052_ADC_TSI_YN	73
+
 #define DA9052_IRQ_DCIN	0
 #define DA9052_IRQ_VBUS	1
 #define DA9052_IRQ_DCINREM	2
diff --git a/include/linux/mfd/da9052/reg.h b/include/linux/mfd/da9052/reg.h
index 5010f978725c..76780ea8849c 100644
--- a/include/linux/mfd/da9052/reg.h
+++ b/include/linux/mfd/da9052/reg.h
@@ -690,7 +690,10 @@
 /* TSI CONTROL REGISTER B BITS */
 #define DA9052_TSICONTB_ADCREF		0X80
 #define DA9052_TSICONTB_TSIMAN		0X40
-#define DA9052_TSICONTB_TSIMUX		0X30
+#define DA9052_TSICONTB_TSIMUX_XP	0X00
+#define DA9052_TSICONTB_TSIMUX_YP	0X10
+#define DA9052_TSICONTB_TSIMUX_XN	0X20
+#define DA9052_TSICONTB_TSIMUX_YN	0X30
 #define DA9052_TSICONTB_TSISEL3	0X08
 #define DA9052_TSICONTB_TSISEL2	0X04
 #define DA9052_TSICONTB_TSISEL1	0X02
@@ -705,8 +708,14 @@
 /* TSI CO-ORDINATE LSB RESULT REGISTER BITS */
 #define DA9052_TSILSB_PENDOWN		0X40
 #define DA9052_TSILSB_TSIZL		0X30
+#define DA9052_TSILSB_TSIZL_SHIFT	4
+#define DA9052_TSILSB_TSIZL_BITS	2
 #define DA9052_TSILSB_TSIYL		0X0C
+#define DA9052_TSILSB_TSIYL_SHIFT	2
+#define DA9052_TSILSB_TSIYL_BITS	2
 #define DA9052_TSILSB_TSIXL		0X03
+#define DA9052_TSILSB_TSIXL_SHIFT	0
+#define DA9052_TSILSB_TSIXL_BITS	2
 
 /* TSI Z MEASUREMENT MSB RESULT REGISTER BIT */
 #define DA9052_TSIZMSB_TSIZM		0XFF
-- 
2.11.0

Re: [PATCHv3 4/4] hwmon: da9052: add support for TSI channel

[Dmitry Torokhov]

Hi Sebastian,

On Thu, Jun 29, 2017 at 02:43:46PM +0200, Sebastian Reichel wrote:
> @@ -238,6 +239,14 @@ static int da9052_ts_probe(struct platform_device *pdev)
>  	if (!da9052)
>  		return -EINVAL;
>  
> +	/*
> +	 * Check if touchscreen pins are used are analogue input instead
> +	 * of having a touchscreen connected to them. The analogue input
> +	 * functionality will be provided by hwmon driver (if enabled).
> +	 */
> +	if (device_property_read_bool(pdev->dev.parent, "dlg,tsi-as-adc"))
> +		return -ENODEV;
> +

I believe this is not the right way of doing this. da9052-core should
simply forgo creating da9052-tsi platform device when this property is
present.

Thanks.

-- 
Dmitry

Re: [PATCHv3 4/4] hwmon: da9052: add support for TSI channel

[Guenter Roeck]

On Thu, Jun 29, 2017 at 11:45:21AM -0700, Dmitry Torokhov wrote:
> Hi Sebastian,
> 
> On Thu, Jun 29, 2017 at 02:43:46PM +0200, Sebastian Reichel wrote:
> > @@ -238,6 +239,14 @@ static int da9052_ts_probe(struct platform_device *pdev)
> >  	if (!da9052)
> >  		return -EINVAL;
> >  
> > +	/*
> > +	 * Check if touchscreen pins are used are analogue input instead
> > +	 * of having a touchscreen connected to them. The analogue input
> > +	 * functionality will be provided by hwmon driver (if enabled).
> > +	 */
> > +	if (device_property_read_bool(pdev->dev.parent, "dlg,tsi-as-adc"))
> > +		return -ENODEV;
> > +
> 
> I believe this is not the right way of doing this. da9052-core should
> simply forgo creating da9052-tsi platform device when this property is
> present.
> 
Agreed.

Guenter