All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Cody <jcody@redhat.com>
To: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org, kwolf@redhat.com, qemu-block@nongnu.org,
	jsnow@redhat.com, Max Reitz <mreitz@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v3 12/20] mirror: Switch mirror_iteration() to byte-based
Date: Fri, 30 Jun 2017 17:14:58 -0400	[thread overview]
Message-ID: <20170630211458.GL4997@localhost.localdomain> (raw)
In-Reply-To: <20170627192458.15519-13-eblake@redhat.com>

On Tue, Jun 27, 2017 at 02:24:50PM -0500, Eric Blake wrote:
> We are gradually converting to byte-based interfaces, as they are
> easier to reason about than sector-based.  Change the internal
> loop iteration of mirroring to track by bytes instead of sectors
> (although we are still guaranteed that we iterate by steps that
> are both sector-aligned and multiples of the granularity).  Drop
> the now-unused mirror_clip_sectors().
> 
> Signed-off-by: Eric Blake <eblake@redhat.com>
> Reviewed-by: John Snow <jsnow@redhat.com>
> 

Reviewed-by: Jeff Cody <jcody@redhat.com>

> ---
> v3: rebase to Paolo's thread-safety changes, R-b kept
> v2: straightforward rebase to earlier mirror_clip_bytes() change, R-b kept
> ---
>  block/mirror.c | 105 +++++++++++++++++++++++++--------------------------------
>  1 file changed, 46 insertions(+), 59 deletions(-)
> 
> diff --git a/block/mirror.c b/block/mirror.c
> index 81ff784..0eb2af4 100644
> --- a/block/mirror.c
> +++ b/block/mirror.c
> @@ -184,15 +184,6 @@ static inline int64_t mirror_clip_bytes(MirrorBlockJob *s,
>      return MIN(bytes, s->bdev_length - offset);
>  }
> 
> -/* Clip nb_sectors relative to sector_num to not exceed end-of-file */
> -static inline int mirror_clip_sectors(MirrorBlockJob *s,
> -                                      int64_t sector_num,
> -                                      int nb_sectors)
> -{
> -    return MIN(nb_sectors,
> -               s->bdev_length / BDRV_SECTOR_SIZE - sector_num);
> -}
> -
>  /* Round offset and/or bytes to target cluster if COW is needed, and
>   * return the offset of the adjusted tail against original. */
>  static int mirror_cow_align(MirrorBlockJob *s, int64_t *offset,
> @@ -336,30 +327,28 @@ static void mirror_do_zero_or_discard(MirrorBlockJob *s,
>  static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
>  {
>      BlockDriverState *source = s->source;
> -    int64_t sector_num, first_chunk;
> +    int64_t offset, first_chunk;
>      uint64_t delay_ns = 0;
>      /* At least the first dirty chunk is mirrored in one iteration. */
>      int nb_chunks = 1;
> -    int64_t end = s->bdev_length / BDRV_SECTOR_SIZE;
>      int sectors_per_chunk = s->granularity >> BDRV_SECTOR_BITS;
>      bool write_zeroes_ok = bdrv_can_write_zeroes_with_unmap(blk_bs(s->target));
>      int max_io_bytes = MAX(s->buf_size / MAX_IN_FLIGHT, MAX_IO_BYTES);
> 
>      bdrv_dirty_bitmap_lock(s->dirty_bitmap);
> -    sector_num = bdrv_dirty_iter_next(s->dbi);
> -    if (sector_num < 0) {
> +    offset = bdrv_dirty_iter_next(s->dbi) * BDRV_SECTOR_SIZE;
> +    if (offset < 0) {
>          bdrv_set_dirty_iter(s->dbi, 0);
> -        sector_num = bdrv_dirty_iter_next(s->dbi);
> +        offset = bdrv_dirty_iter_next(s->dbi) * BDRV_SECTOR_SIZE;
>          trace_mirror_restart_iter(s, bdrv_get_dirty_count(s->dirty_bitmap) *
>                                    BDRV_SECTOR_SIZE);
> -        assert(sector_num >= 0);
> +        assert(offset >= 0);
>      }
>      bdrv_dirty_bitmap_unlock(s->dirty_bitmap);
> 
> -    first_chunk = sector_num / sectors_per_chunk;
> +    first_chunk = offset / s->granularity;
>      while (test_bit(first_chunk, s->in_flight_bitmap)) {
> -        trace_mirror_yield_in_flight(s, sector_num * BDRV_SECTOR_SIZE,
> -                                     s->in_flight);
> +        trace_mirror_yield_in_flight(s, offset, s->in_flight);
>          mirror_wait_for_io(s);
>      }
> 
> @@ -368,25 +357,26 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
>      /* Find the number of consective dirty chunks following the first dirty
>       * one, and wait for in flight requests in them. */
>      bdrv_dirty_bitmap_lock(s->dirty_bitmap);
> -    while (nb_chunks * sectors_per_chunk < (s->buf_size >> BDRV_SECTOR_BITS)) {
> +    while (nb_chunks * s->granularity < s->buf_size) {
>          int64_t next_dirty;
> -        int64_t next_sector = sector_num + nb_chunks * sectors_per_chunk;
> -        int64_t next_chunk = next_sector / sectors_per_chunk;
> -        if (next_sector >= end ||
> -            !bdrv_get_dirty_locked(source, s->dirty_bitmap, next_sector)) {
> +        int64_t next_offset = offset + nb_chunks * s->granularity;
> +        int64_t next_chunk = next_offset / s->granularity;
> +        if (next_offset >= s->bdev_length ||
> +            !bdrv_get_dirty_locked(source, s->dirty_bitmap,
> +                                   next_offset >> BDRV_SECTOR_BITS)) {
>              break;
>          }
>          if (test_bit(next_chunk, s->in_flight_bitmap)) {
>              break;
>          }
> 
> -        next_dirty = bdrv_dirty_iter_next(s->dbi);
> -        if (next_dirty > next_sector || next_dirty < 0) {
> +        next_dirty = bdrv_dirty_iter_next(s->dbi) * BDRV_SECTOR_SIZE;
> +        if (next_dirty > next_offset || next_dirty < 0) {
>              /* The bitmap iterator's cache is stale, refresh it */
> -            bdrv_set_dirty_iter(s->dbi, next_sector);
> -            next_dirty = bdrv_dirty_iter_next(s->dbi);
> +            bdrv_set_dirty_iter(s->dbi, next_offset >> BDRV_SECTOR_BITS);
> +            next_dirty = bdrv_dirty_iter_next(s->dbi) * BDRV_SECTOR_SIZE;
>          }
> -        assert(next_dirty == next_sector);
> +        assert(next_dirty == next_offset);
>          nb_chunks++;
>      }
> 
> @@ -394,14 +384,15 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
>       * calling bdrv_get_block_status_above could yield - if some blocks are
>       * marked dirty in this window, we need to know.
>       */
> -    bdrv_reset_dirty_bitmap_locked(s->dirty_bitmap, sector_num,
> -                                  nb_chunks * sectors_per_chunk);
> +    bdrv_reset_dirty_bitmap_locked(s->dirty_bitmap, offset >> BDRV_SECTOR_BITS,
> +                                   nb_chunks * sectors_per_chunk);
>      bdrv_dirty_bitmap_unlock(s->dirty_bitmap);
> 
> -    bitmap_set(s->in_flight_bitmap, sector_num / sectors_per_chunk, nb_chunks);
> -    while (nb_chunks > 0 && sector_num < end) {
> +    bitmap_set(s->in_flight_bitmap, offset / s->granularity, nb_chunks);
> +    while (nb_chunks > 0 && offset < s->bdev_length) {
>          int64_t ret;
>          int io_sectors;
> +        unsigned int io_bytes;
>          int64_t io_bytes_acct;
>          BlockDriverState *file;
>          enum MirrorMethod {
> @@ -410,28 +401,28 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
>              MIRROR_METHOD_DISCARD
>          } mirror_method = MIRROR_METHOD_COPY;
> 
> -        assert(!(sector_num % sectors_per_chunk));
> -        ret = bdrv_get_block_status_above(source, NULL, sector_num,
> +        assert(!(offset % s->granularity));
> +        ret = bdrv_get_block_status_above(source, NULL,
> +                                          offset >> BDRV_SECTOR_BITS,
>                                            nb_chunks * sectors_per_chunk,
>                                            &io_sectors, &file);
> +        io_bytes = io_sectors * BDRV_SECTOR_SIZE;
>          if (ret < 0) {
> -            io_sectors = MIN(nb_chunks * sectors_per_chunk,
> -                             max_io_bytes >> BDRV_SECTOR_BITS);
> +            io_bytes = MIN(nb_chunks * s->granularity, max_io_bytes);
>          } else if (ret & BDRV_BLOCK_DATA) {
> -            io_sectors = MIN(io_sectors, max_io_bytes >> BDRV_SECTOR_BITS);
> +            io_bytes = MIN(io_bytes, max_io_bytes);
>          }
> 
> -        io_sectors -= io_sectors % sectors_per_chunk;
> -        if (io_sectors < sectors_per_chunk) {
> -            io_sectors = sectors_per_chunk;
> +        io_bytes -= io_bytes % s->granularity;
> +        if (io_bytes < s->granularity) {
> +            io_bytes = s->granularity;
>          } else if (ret >= 0 && !(ret & BDRV_BLOCK_DATA)) {
> -            int64_t target_sector_num;
> -            int target_nb_sectors;
> -            bdrv_round_sectors_to_clusters(blk_bs(s->target), sector_num,
> -                                           io_sectors,  &target_sector_num,
> -                                           &target_nb_sectors);
> -            if (target_sector_num == sector_num &&
> -                target_nb_sectors == io_sectors) {
> +            int64_t target_offset;
> +            unsigned int target_bytes;
> +            bdrv_round_to_clusters(blk_bs(s->target), offset, io_bytes,
> +                                   &target_offset, &target_bytes);
> +            if (target_offset == offset &&
> +                target_bytes == io_bytes) {
>                  mirror_method = ret & BDRV_BLOCK_ZERO ?
>                                      MIRROR_METHOD_ZERO :
>                                      MIRROR_METHOD_DISCARD;
> @@ -439,8 +430,7 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
>          }
> 
>          while (s->in_flight >= MAX_IN_FLIGHT) {
> -            trace_mirror_yield_in_flight(s, sector_num * BDRV_SECTOR_SIZE,
> -                                         s->in_flight);
> +            trace_mirror_yield_in_flight(s, offset, s->in_flight);
>              mirror_wait_for_io(s);
>          }
> 
> @@ -448,30 +438,27 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
>              return 0;
>          }
> 
> -        io_sectors = mirror_clip_sectors(s, sector_num, io_sectors);
> +        io_bytes = mirror_clip_bytes(s, offset, io_bytes);
>          switch (mirror_method) {
>          case MIRROR_METHOD_COPY:
> -            io_bytes_acct = mirror_do_read(s, sector_num * BDRV_SECTOR_SIZE,
> -                                           io_sectors * BDRV_SECTOR_SIZE);
> -            io_sectors = io_bytes_acct / BDRV_SECTOR_SIZE;
> +            io_bytes = io_bytes_acct = mirror_do_read(s, offset, io_bytes);
>              break;
>          case MIRROR_METHOD_ZERO:
>          case MIRROR_METHOD_DISCARD:
> -            mirror_do_zero_or_discard(s, sector_num * BDRV_SECTOR_SIZE,
> -                                      io_sectors * BDRV_SECTOR_SIZE,
> +            mirror_do_zero_or_discard(s, offset, io_bytes,
>                                        mirror_method == MIRROR_METHOD_DISCARD);
>              if (write_zeroes_ok) {
>                  io_bytes_acct = 0;
>              } else {
> -                io_bytes_acct = io_sectors * BDRV_SECTOR_SIZE;
> +                io_bytes_acct = io_bytes;
>              }
>              break;
>          default:
>              abort();
>          }
> -        assert(io_sectors);
> -        sector_num += io_sectors;
> -        nb_chunks -= DIV_ROUND_UP(io_sectors, sectors_per_chunk);
> +        assert(io_bytes);
> +        offset += io_bytes;
> +        nb_chunks -= DIV_ROUND_UP(io_bytes, s->granularity);
>          if (s->common.speed) {
>              delay_ns = ratelimit_calculate_delay(&s->limit, io_bytes_acct);
>          }
> -- 
> 2.9.4
> 

  reply	other threads:[~2017-06-30 21:15 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-27 19:24 [Qemu-devel] [PATCH v3 00/20] make bdrv_is_allocated[_above] byte-based Eric Blake
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 01/20] blockjob: Track job ratelimits via bytes, not sectors Eric Blake
2017-06-30 19:42   ` Jeff Cody
2017-07-04 15:28   ` Kevin Wolf
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 02/20] trace: Show blockjob actions " Eric Blake
2017-06-30 19:56   ` Jeff Cody
2017-07-04 15:28   ` Kevin Wolf
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 03/20] stream: Switch stream_populate() to byte-based Eric Blake
2017-06-30 19:57   ` Jeff Cody
2017-07-04 15:28   ` Kevin Wolf
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 04/20] stream: Switch stream_run() " Eric Blake
2017-06-30 20:01   ` Jeff Cody
2017-07-04 15:00   ` Kevin Wolf
2017-07-05 12:13     ` Eric Blake
2017-07-05 13:41       ` Kevin Wolf
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 05/20] commit: Switch commit_populate() " Eric Blake
2017-06-30 20:17   ` Jeff Cody
2017-07-04 15:28   ` Kevin Wolf
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 06/20] commit: Switch commit_run() " Eric Blake
2017-06-30 20:19   ` Jeff Cody
2017-07-04 15:29   ` Kevin Wolf
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 07/20] mirror: Switch MirrorBlockJob " Eric Blake
2017-06-30 20:20   ` Jeff Cody
2017-07-05 11:42   ` Kevin Wolf
2017-07-05 20:18     ` Eric Blake
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 08/20] mirror: Switch mirror_do_zero_or_discard() " Eric Blake
2017-06-30 20:22   ` Jeff Cody
2017-07-05 16:36   ` Kevin Wolf
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 09/20] mirror: Update signature of mirror_clip_sectors() Eric Blake
2017-06-30 20:51   ` Jeff Cody
2017-07-05 16:37   ` Kevin Wolf
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 10/20] mirror: Switch mirror_cow_align() to byte-based Eric Blake
2017-06-30 21:03   ` Jeff Cody
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 11/20] mirror: Switch mirror_do_read() " Eric Blake
2017-06-30 21:07   ` Jeff Cody
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 12/20] mirror: Switch mirror_iteration() " Eric Blake
2017-06-30 21:14   ` Jeff Cody [this message]
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 13/20] block: Drop unused bdrv_round_sectors_to_clusters() Eric Blake
2017-06-30 21:17   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 14/20] backup: Switch BackupBlockJob to byte-based Eric Blake
2017-06-30 21:18   ` Jeff Cody
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 15/20] backup: Switch block_backup.h " Eric Blake
2017-06-28  0:38   ` Xie Changlong
2017-06-30 21:23   ` Jeff Cody
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 16/20] backup: Switch backup_do_cow() " Eric Blake
2017-06-30 21:24   ` Jeff Cody
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 17/20] backup: Switch backup_run() " Eric Blake
2017-06-30 21:25   ` Jeff Cody
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 18/20] block: Make bdrv_is_allocated() byte-based Eric Blake
2017-06-28  9:14   ` Juan Quintela
2017-06-30 21:32   ` Jeff Cody
2017-07-03 18:22   ` Eric Blake
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 19/20] block: Minimize raw use of bds->total_sectors Eric Blake
2017-06-28  8:57   ` [Qemu-devel] [Qemu-block] " Manos Pitsidianakis
2017-06-30 21:34   ` Jeff Cody
2017-06-27 19:24 ` [Qemu-devel] [PATCH v3 20/20] block: Make bdrv_is_allocated_above() byte-based Eric Blake
2017-06-28  0:38   ` Xie Changlong
2017-06-30 21:36   ` Jeff Cody

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170630211458.GL4997@localhost.localdomain \
    --to=jcody@redhat.com \
    --cc=eblake@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.