* [PATCH v3 0/4] thermal: add brcmstb AVS TMON driver
@ 2017-07-31 19:26 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: Zhang Rui, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Markus Mayer, Broadcom Kernel List, Power Management List,
Device Tree List, ARM Kernel List, Linux Kernel Mailing List
From: Markus Mayer <mmayer@broadcom.com>
This series adds the brcmstb AVS TMON driver.
The driver was originally written by Brian Norris.
v1 of this series can be found at https://lkml.org/lkml/2017/6/5/921
v2 of this series can be found at https://lkml.org/lkml/2017/7/21/585
Changes since v2:
- replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4 only]
- all other patches are unchanged from v2
Changes since v1:
- Fixed wording in binding document
- Fixed lincensing to consistently mention GPL v2
- Use thermal_zone_get_slope() and thermal_zone_get_offset()
- Some minor clean-ups
Brian Norris (2):
Documentation: devicetree: add binding for Broadcom STB AVS TMON
thermal: add brcmstb AVS TMON driver
Markus Mayer (2):
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
.../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20 ++
MAINTAINERS | 8 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm64/configs/defconfig | 1 +
drivers/thermal/Kconfig | 2 +-
drivers/thermal/broadcom/Kconfig | 7 +
drivers/thermal/broadcom/Makefile | 1 +
drivers/thermal/broadcom/brcmstb_thermal.c | 386 +++++++++++++++++++++
8 files changed, 425 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
--
2.7.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 0/4] thermal: add brcmstb AVS TMON driver
@ 2017-07-31 19:26 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: Zhang Rui, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Markus Mayer, Broadcom Kernel List, Power Management List,
Device Tree List, ARM Kernel List, Linux Kernel Mailing List
From: Markus Mayer <mmayer-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
This series adds the brcmstb AVS TMON driver.
The driver was originally written by Brian Norris.
v1 of this series can be found at https://lkml.org/lkml/2017/6/5/921
v2 of this series can be found at https://lkml.org/lkml/2017/7/21/585
Changes since v2:
- replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4 only]
- all other patches are unchanged from v2
Changes since v1:
- Fixed wording in binding document
- Fixed lincensing to consistently mention GPL v2
- Use thermal_zone_get_slope() and thermal_zone_get_offset()
- Some minor clean-ups
Brian Norris (2):
Documentation: devicetree: add binding for Broadcom STB AVS TMON
thermal: add brcmstb AVS TMON driver
Markus Mayer (2):
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
.../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20 ++
MAINTAINERS | 8 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm64/configs/defconfig | 1 +
drivers/thermal/Kconfig | 2 +-
drivers/thermal/broadcom/Kconfig | 7 +
drivers/thermal/broadcom/Makefile | 1 +
drivers/thermal/broadcom/brcmstb_thermal.c | 386 +++++++++++++++++++++
8 files changed, 425 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 0/4] thermal: add brcmstb AVS TMON driver
@ 2017-07-31 19:26 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: linux-arm-kernel
From: Markus Mayer <mmayer@broadcom.com>
This series adds the brcmstb AVS TMON driver.
The driver was originally written by Brian Norris.
v1 of this series can be found at https://lkml.org/lkml/2017/6/5/921
v2 of this series can be found at https://lkml.org/lkml/2017/7/21/585
Changes since v2:
- replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4 only]
- all other patches are unchanged from v2
Changes since v1:
- Fixed wording in binding document
- Fixed lincensing to consistently mention GPL v2
- Use thermal_zone_get_slope() and thermal_zone_get_offset()
- Some minor clean-ups
Brian Norris (2):
Documentation: devicetree: add binding for Broadcom STB AVS TMON
thermal: add brcmstb AVS TMON driver
Markus Mayer (2):
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
.../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20 ++
MAINTAINERS | 8 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm64/configs/defconfig | 1 +
drivers/thermal/Kconfig | 2 +-
drivers/thermal/broadcom/Kconfig | 7 +
drivers/thermal/broadcom/Makefile | 1 +
drivers/thermal/broadcom/brcmstb_thermal.c | 386 +++++++++++++++++++++
8 files changed, 425 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
--
2.7.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 1/4] Documentation: devicetree: add binding for Broadcom STB AVS TMON
2017-07-31 19:26 ` Markus Mayer
@ 2017-07-31 19:26 ` Markus Mayer
-1 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: Zhang Rui, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Broadcom Kernel List, Power Management List, Device Tree List,
ARM Kernel List, Linux Kernel Mailing List, Markus Mayer
From: Brian Norris <computersforpeace@gmail.com>
Add binding for Broadcom STB thermal.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
.../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20 ++++++++++++++++++++
MAINTAINERS | 8 ++++++++
2 files changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
new file mode 100644
index 0000000..9d43553
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
@@ -0,0 +1,20 @@
+* Broadcom STB thermal management
+
+Thermal management core, provided by the AVS TMON hardware block.
+
+Required properties:
+- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
+- reg: address range for the AVS TMON registers
+- interrupts: temperature monitor interrupt, for high/low threshold triggers
+- interrupt-names: should be "tmon"
+- interrupt-parent: the parent interrupt controller
+
+Example:
+
+ thermal@f04d1500 {
+ compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+ reg = <0xf04d1500 0x28>;
+ interrupts = <0x6>;
+ interrupt-names = "tmon";
+ interrupt-parent = <&avs_host_l2_intc>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 205d397..a683d4c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2928,6 +2928,14 @@ S: Maintained
F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
F: drivers/cpufreq/brcmstb*
+BROADCOM STB AVS TMON DRIVER
+M: Markus Mayer <mmayer@broadcom.com>
+M: bcm-kernel-feedback-list@broadcom.com
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
+F: drivers/thermal/broadcom/brcmstb*
+
BROADCOM SPECIFIC AMBA DRIVER (BCMA)
M: Rafał Miłecki <zajec5@gmail.com>
L: linux-wireless@vger.kernel.org
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v3 1/4] Documentation: devicetree: add binding for Broadcom STB AVS TMON
@ 2017-07-31 19:26 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: linux-arm-kernel
From: Brian Norris <computersforpeace@gmail.com>
Add binding for Broadcom STB thermal.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
.../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20 ++++++++++++++++++++
MAINTAINERS | 8 ++++++++
2 files changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
new file mode 100644
index 0000000..9d43553
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
@@ -0,0 +1,20 @@
+* Broadcom STB thermal management
+
+Thermal management core, provided by the AVS TMON hardware block.
+
+Required properties:
+- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
+- reg: address range for the AVS TMON registers
+- interrupts: temperature monitor interrupt, for high/low threshold triggers
+- interrupt-names: should be "tmon"
+- interrupt-parent: the parent interrupt controller
+
+Example:
+
+ thermal at f04d1500 {
+ compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+ reg = <0xf04d1500 0x28>;
+ interrupts = <0x6>;
+ interrupt-names = "tmon";
+ interrupt-parent = <&avs_host_l2_intc>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 205d397..a683d4c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2928,6 +2928,14 @@ S: Maintained
F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
F: drivers/cpufreq/brcmstb*
+BROADCOM STB AVS TMON DRIVER
+M: Markus Mayer <mmayer@broadcom.com>
+M: bcm-kernel-feedback-list at broadcom.com
+L: linux-pm at vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
+F: drivers/thermal/broadcom/brcmstb*
+
BROADCOM SPECIFIC AMBA DRIVER (BCMA)
M: Rafa? Mi?ecki <zajec5@gmail.com>
L: linux-wireless at vger.kernel.org
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v3 2/4] thermal: add brcmstb AVS TMON driver
2017-07-31 19:26 ` Markus Mayer
@ 2017-07-31 19:26 ` Markus Mayer
-1 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: Zhang Rui, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Broadcom Kernel List, Power Management List, Device Tree List,
ARM Kernel List, Linux Kernel Mailing List, Markus Mayer
From: Brian Norris <computersforpeace@gmail.com>
The AVS TMON core provides temperature readings, a pair of configurable
high- and low-temperature threshold interrupts, and an emergency
over-temperature chip reset. The driver utilizes the first two to
provide temperature readings and high-temperature notifications to
applications. The over-temperature reset is not exposed to
applications; this reset threshold is critical to the system and should
be set with care within the bootloader.
Applications may choose to utilize the notification mechanism, the
temperature reading mechanism (e.g., through polling), or both.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
drivers/thermal/Kconfig | 2 +-
drivers/thermal/broadcom/Kconfig | 7 +
drivers/thermal/broadcom/Makefile | 1 +
drivers/thermal/broadcom/brcmstb_thermal.c | 386 +++++++++++++++++++++++++++++
4 files changed, 395 insertions(+), 1 deletion(-)
create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index b5b5fac..396ad6b 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -408,7 +408,7 @@ config MTK_THERMAL
controller present in Mediatek SoCs
menu "Broadcom thermal drivers"
-depends on ARCH_BCM || COMPILE_TEST
+depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
source "drivers/thermal/broadcom/Kconfig"
endmenu
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index 42c098e..c106a15 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -6,6 +6,13 @@ config BCM2835_THERMAL
help
Support for thermal sensors on Broadcom bcm2835 SoCs.
+config BRCMSTB_THERMAL
+ tristate "Broadcom STB AVS TMON thermal driver"
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ help
+ Enable this driver if you have a Broadcom STB SoC and would like
+ thermal framework support.
+
config BCM_NS_THERMAL
tristate "Northstar thermal driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile
index c6f62e4..fae10ec 100644
--- a/drivers/thermal/broadcom/Makefile
+++ b/drivers/thermal/broadcom/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o
+obj-$(CONFIG_BRCMSTB_THERMAL) += brcmstb_thermal.o
obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
new file mode 100644
index 0000000..87b8e7a
--- /dev/null
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -0,0 +1,386 @@
+/*
+ * Broadcom STB AVS TMON thermal sensor driver
+ *
+ * Copyright (c) 2015-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define DRV_NAME "brcmstb_thermal"
+
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/thermal.h>
+
+#define AVS_TMON_STATUS 0x00
+ #define AVS_TMON_STATUS_valid_msk BIT(11)
+ #define AVS_TMON_STATUS_data_msk GENMASK(10, 1)
+ #define AVS_TMON_STATUS_data_shift 1
+
+#define AVS_TMON_EN_OVERTEMP_RESET 0x04
+ #define AVS_TMON_EN_OVERTEMP_RESET_msk BIT(0)
+
+#define AVS_TMON_RESET_THRESH 0x08
+ #define AVS_TMON_RESET_THRESH_msk GENMASK(10, 1)
+ #define AVS_TMON_RESET_THRESH_shift 1
+
+#define AVS_TMON_INT_IDLE_TIME 0x10
+
+#define AVS_TMON_EN_TEMP_INT_SRCS 0x14
+ #define AVS_TMON_EN_TEMP_INT_SRCS_high BIT(1)
+ #define AVS_TMON_EN_TEMP_INT_SRCS_low BIT(0)
+
+#define AVS_TMON_INT_THRESH 0x18
+ #define AVS_TMON_INT_THRESH_high_msk GENMASK(26, 17)
+ #define AVS_TMON_INT_THRESH_high_shift 17
+ #define AVS_TMON_INT_THRESH_low_msk GENMASK(10, 1)
+ #define AVS_TMON_INT_THRESH_low_shift 1
+
+#define AVS_TMON_TEMP_INT_CODE 0x1c
+#define AVS_TMON_TP_TEST_ENABLE 0x20
+
+/* Default coefficients */
+#define AVS_TMON_TEMP_SLOPE -487
+#define AVS_TMON_TEMP_OFFSET 410040
+
+/* HW related temperature constants */
+#define AVS_TMON_TEMP_MAX 0x3ff
+#define AVS_TMON_TEMP_MIN -88161
+#define AVS_TMON_TEMP_MASK AVS_TMON_TEMP_MAX
+
+enum avs_tmon_trip_type {
+ TMON_TRIP_TYPE_LOW = 0,
+ TMON_TRIP_TYPE_HIGH,
+ TMON_TRIP_TYPE_RESET,
+ TMON_TRIP_TYPE_MAX,
+};
+
+struct avs_tmon_trip {
+ /* HW bit to enable the trip */
+ u32 enable_offs;
+ u32 enable_mask;
+
+ /* HW field to read the trip temperature */
+ u32 reg_offs;
+ u32 reg_msk;
+ int reg_shift;
+};
+
+static struct avs_tmon_trip avs_tmon_trips[] = {
+ /* Trips when temperature is below threshold */
+ [TMON_TRIP_TYPE_LOW] = {
+ .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS,
+ .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_low,
+ .reg_offs = AVS_TMON_INT_THRESH,
+ .reg_msk = AVS_TMON_INT_THRESH_low_msk,
+ .reg_shift = AVS_TMON_INT_THRESH_low_shift,
+ },
+ /* Trips when temperature is above threshold */
+ [TMON_TRIP_TYPE_HIGH] = {
+ .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS,
+ .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_high,
+ .reg_offs = AVS_TMON_INT_THRESH,
+ .reg_msk = AVS_TMON_INT_THRESH_high_msk,
+ .reg_shift = AVS_TMON_INT_THRESH_high_shift,
+ },
+ /* Automatically resets chip when above threshold */
+ [TMON_TRIP_TYPE_RESET] = {
+ .enable_offs = AVS_TMON_EN_OVERTEMP_RESET,
+ .enable_mask = AVS_TMON_EN_OVERTEMP_RESET_msk,
+ .reg_offs = AVS_TMON_RESET_THRESH,
+ .reg_msk = AVS_TMON_RESET_THRESH_msk,
+ .reg_shift = AVS_TMON_RESET_THRESH_shift,
+ },
+};
+
+struct brcmstb_thermal_priv {
+ void __iomem *tmon_base;
+ struct device *dev;
+ struct thermal_zone_device *thermal;
+};
+
+static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope,
+ int *offset)
+{
+ *slope = thermal_zone_get_slope(tz);
+ *offset = thermal_zone_get_offset(tz);
+}
+
+/* Convert a HW code to a temperature reading (millidegree celsius) */
+static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
+ u32 code)
+{
+ const int val = code & AVS_TMON_TEMP_MASK;
+ int slope, offset;
+
+ avs_tmon_get_coeffs(tz, &slope, &offset);
+
+ return slope * val + offset;
+}
+
+/*
+ * Convert a temperature value (millidegree celsius) to a HW code
+ *
+ * @temp: temperature to convert
+ * @low: if true, round toward the low side
+ */
+static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz,
+ int temp, bool low)
+{
+ int slope, offset;
+
+ if (temp < AVS_TMON_TEMP_MIN)
+ return AVS_TMON_TEMP_MAX; /* Maximum code value */
+
+ avs_tmon_get_coeffs(tz, &slope, &offset);
+
+ if (temp >= offset)
+ return 0; /* Minimum code value */
+
+ if (low)
+ return (u32)(DIV_ROUND_UP(offset - temp, abs(slope)));
+ else
+ return (u32)((offset - temp) / abs(slope));
+}
+
+static int brcmstb_get_temp(void *data, int *temp)
+{
+ struct brcmstb_thermal_priv *priv = data;
+ u32 val;
+ long t;
+
+ val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
+
+ if (!(val & AVS_TMON_STATUS_valid_msk)) {
+ dev_err(priv->dev, "reading not valid\n");
+ return -EIO;
+ }
+
+ val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
+
+ t = avs_tmon_code_to_temp(priv->thermal, val);
+ if (t < 0)
+ *temp = 0;
+ else
+ *temp = t;
+
+ return 0;
+}
+
+static void avs_tmon_trip_enable(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type, int en)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val = __raw_readl(priv->tmon_base + trip->enable_offs);
+
+ dev_dbg(priv->dev, "%sable trip, type %d\n", en ? "en" : "dis", type);
+
+ if (en)
+ val |= trip->enable_mask;
+ else
+ val &= ~trip->enable_mask;
+
+ __raw_writel(val, priv->tmon_base + trip->enable_offs);
+}
+
+static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val = __raw_readl(priv->tmon_base + trip->reg_offs);
+
+ val &= trip->reg_msk;
+ val >>= trip->reg_shift;
+
+ return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type,
+ int temp)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val, orig;
+
+ dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
+
+ /* round toward low temp for the low interrupt */
+ val = avs_tmon_temp_to_code(priv->thermal, temp,
+ type == TMON_TRIP_TYPE_LOW);
+
+ val <<= trip->reg_shift;
+ val &= trip->reg_msk;
+
+ orig = __raw_readl(priv->tmon_base + trip->reg_offs);
+ orig &= ~trip->reg_msk;
+ orig |= val;
+ __raw_writel(orig, priv->tmon_base + trip->reg_offs);
+}
+
+static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
+{
+ u32 val;
+
+ val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
+ return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
+{
+ struct brcmstb_thermal_priv *priv = data;
+ int low, high, intr;
+
+ low = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_LOW);
+ high = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_HIGH);
+ intr = avs_tmon_get_intr_temp(priv);
+
+ dev_dbg(priv->dev, "low/intr/high: %d/%d/%d\n",
+ low, intr, high);
+
+ /* Disable high-temp until next threshold shift */
+ if (intr >= high)
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+ /* Disable low-temp until next threshold shift */
+ if (intr <= low)
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+
+ /*
+ * Notify using the interrupt temperature, in case the temperature
+ * changes before it can next be read out
+ */
+ thermal_zone_device_update(priv->thermal, intr);
+
+ return IRQ_HANDLED;
+}
+
+static int brcmstb_set_trips(void *data, int low, int high)
+{
+ struct brcmstb_thermal_priv *priv = data;
+
+ dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
+
+ if (low) {
+ if (low > INT_MAX)
+ low = INT_MAX;
+ avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
+ } else {
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+ }
+
+ if (high < ULONG_MAX) {
+ if (high > INT_MAX)
+ high = INT_MAX;
+ avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
+ } else {
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+ }
+
+ return 0;
+}
+
+static struct thermal_zone_of_device_ops of_ops = {
+ .get_temp = brcmstb_get_temp,
+ .set_trips = brcmstb_set_trips,
+};
+
+static const struct of_device_id brcmstb_thermal_id_table[] = {
+ { .compatible = "brcm,avs-tmon" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
+
+static int brcmstb_thermal_probe(struct platform_device *pdev)
+{
+ struct thermal_zone_device *thermal;
+ struct brcmstb_thermal_priv *priv;
+ struct resource *res;
+ int irq, ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->tmon_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->tmon_base))
+ return PTR_ERR(priv->tmon_base);
+
+ priv->dev = &pdev->dev;
+ platform_set_drvdata(pdev, priv);
+
+ thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops);
+ if (IS_ERR(thermal)) {
+ ret = PTR_ERR(thermal);
+ dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
+ return ret;
+ }
+
+ priv->thermal = thermal;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "could not get IRQ\n");
+ ret = irq;
+ goto err;
+ }
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ brcmstb_tmon_irq_thread, IRQF_ONESHOT,
+ DRV_NAME, priv);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not request IRQ: %d\n", ret);
+ goto err;
+ }
+
+ dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n");
+
+ return 0;
+
+err:
+ thermal_zone_of_sensor_unregister(&pdev->dev, thermal);
+ return ret;
+}
+
+static int brcmstb_thermal_exit(struct platform_device *pdev)
+{
+ struct brcmstb_thermal_priv *priv = platform_get_drvdata(pdev);
+ struct thermal_zone_device *thermal = priv->thermal;
+
+ if (thermal)
+ thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal);
+
+ return 0;
+}
+
+static struct platform_driver brcmstb_thermal_driver = {
+ .probe = brcmstb_thermal_probe,
+ .remove = brcmstb_thermal_exit,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = brcmstb_thermal_id_table,
+ },
+};
+module_platform_driver(brcmstb_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("Broadcom STB AVS TMON thermal driver");
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v3 2/4] thermal: add brcmstb AVS TMON driver
@ 2017-07-31 19:26 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: linux-arm-kernel
From: Brian Norris <computersforpeace@gmail.com>
The AVS TMON core provides temperature readings, a pair of configurable
high- and low-temperature threshold interrupts, and an emergency
over-temperature chip reset. The driver utilizes the first two to
provide temperature readings and high-temperature notifications to
applications. The over-temperature reset is not exposed to
applications; this reset threshold is critical to the system and should
be set with care within the bootloader.
Applications may choose to utilize the notification mechanism, the
temperature reading mechanism (e.g., through polling), or both.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
drivers/thermal/Kconfig | 2 +-
drivers/thermal/broadcom/Kconfig | 7 +
drivers/thermal/broadcom/Makefile | 1 +
drivers/thermal/broadcom/brcmstb_thermal.c | 386 +++++++++++++++++++++++++++++
4 files changed, 395 insertions(+), 1 deletion(-)
create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index b5b5fac..396ad6b 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -408,7 +408,7 @@ config MTK_THERMAL
controller present in Mediatek SoCs
menu "Broadcom thermal drivers"
-depends on ARCH_BCM || COMPILE_TEST
+depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
source "drivers/thermal/broadcom/Kconfig"
endmenu
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index 42c098e..c106a15 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -6,6 +6,13 @@ config BCM2835_THERMAL
help
Support for thermal sensors on Broadcom bcm2835 SoCs.
+config BRCMSTB_THERMAL
+ tristate "Broadcom STB AVS TMON thermal driver"
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ help
+ Enable this driver if you have a Broadcom STB SoC and would like
+ thermal framework support.
+
config BCM_NS_THERMAL
tristate "Northstar thermal driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile
index c6f62e4..fae10ec 100644
--- a/drivers/thermal/broadcom/Makefile
+++ b/drivers/thermal/broadcom/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o
+obj-$(CONFIG_BRCMSTB_THERMAL) += brcmstb_thermal.o
obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
new file mode 100644
index 0000000..87b8e7a
--- /dev/null
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -0,0 +1,386 @@
+/*
+ * Broadcom STB AVS TMON thermal sensor driver
+ *
+ * Copyright (c) 2015-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define DRV_NAME "brcmstb_thermal"
+
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/thermal.h>
+
+#define AVS_TMON_STATUS 0x00
+ #define AVS_TMON_STATUS_valid_msk BIT(11)
+ #define AVS_TMON_STATUS_data_msk GENMASK(10, 1)
+ #define AVS_TMON_STATUS_data_shift 1
+
+#define AVS_TMON_EN_OVERTEMP_RESET 0x04
+ #define AVS_TMON_EN_OVERTEMP_RESET_msk BIT(0)
+
+#define AVS_TMON_RESET_THRESH 0x08
+ #define AVS_TMON_RESET_THRESH_msk GENMASK(10, 1)
+ #define AVS_TMON_RESET_THRESH_shift 1
+
+#define AVS_TMON_INT_IDLE_TIME 0x10
+
+#define AVS_TMON_EN_TEMP_INT_SRCS 0x14
+ #define AVS_TMON_EN_TEMP_INT_SRCS_high BIT(1)
+ #define AVS_TMON_EN_TEMP_INT_SRCS_low BIT(0)
+
+#define AVS_TMON_INT_THRESH 0x18
+ #define AVS_TMON_INT_THRESH_high_msk GENMASK(26, 17)
+ #define AVS_TMON_INT_THRESH_high_shift 17
+ #define AVS_TMON_INT_THRESH_low_msk GENMASK(10, 1)
+ #define AVS_TMON_INT_THRESH_low_shift 1
+
+#define AVS_TMON_TEMP_INT_CODE 0x1c
+#define AVS_TMON_TP_TEST_ENABLE 0x20
+
+/* Default coefficients */
+#define AVS_TMON_TEMP_SLOPE -487
+#define AVS_TMON_TEMP_OFFSET 410040
+
+/* HW related temperature constants */
+#define AVS_TMON_TEMP_MAX 0x3ff
+#define AVS_TMON_TEMP_MIN -88161
+#define AVS_TMON_TEMP_MASK AVS_TMON_TEMP_MAX
+
+enum avs_tmon_trip_type {
+ TMON_TRIP_TYPE_LOW = 0,
+ TMON_TRIP_TYPE_HIGH,
+ TMON_TRIP_TYPE_RESET,
+ TMON_TRIP_TYPE_MAX,
+};
+
+struct avs_tmon_trip {
+ /* HW bit to enable the trip */
+ u32 enable_offs;
+ u32 enable_mask;
+
+ /* HW field to read the trip temperature */
+ u32 reg_offs;
+ u32 reg_msk;
+ int reg_shift;
+};
+
+static struct avs_tmon_trip avs_tmon_trips[] = {
+ /* Trips when temperature is below threshold */
+ [TMON_TRIP_TYPE_LOW] = {
+ .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS,
+ .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_low,
+ .reg_offs = AVS_TMON_INT_THRESH,
+ .reg_msk = AVS_TMON_INT_THRESH_low_msk,
+ .reg_shift = AVS_TMON_INT_THRESH_low_shift,
+ },
+ /* Trips when temperature is above threshold */
+ [TMON_TRIP_TYPE_HIGH] = {
+ .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS,
+ .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_high,
+ .reg_offs = AVS_TMON_INT_THRESH,
+ .reg_msk = AVS_TMON_INT_THRESH_high_msk,
+ .reg_shift = AVS_TMON_INT_THRESH_high_shift,
+ },
+ /* Automatically resets chip when above threshold */
+ [TMON_TRIP_TYPE_RESET] = {
+ .enable_offs = AVS_TMON_EN_OVERTEMP_RESET,
+ .enable_mask = AVS_TMON_EN_OVERTEMP_RESET_msk,
+ .reg_offs = AVS_TMON_RESET_THRESH,
+ .reg_msk = AVS_TMON_RESET_THRESH_msk,
+ .reg_shift = AVS_TMON_RESET_THRESH_shift,
+ },
+};
+
+struct brcmstb_thermal_priv {
+ void __iomem *tmon_base;
+ struct device *dev;
+ struct thermal_zone_device *thermal;
+};
+
+static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope,
+ int *offset)
+{
+ *slope = thermal_zone_get_slope(tz);
+ *offset = thermal_zone_get_offset(tz);
+}
+
+/* Convert a HW code to a temperature reading (millidegree celsius) */
+static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
+ u32 code)
+{
+ const int val = code & AVS_TMON_TEMP_MASK;
+ int slope, offset;
+
+ avs_tmon_get_coeffs(tz, &slope, &offset);
+
+ return slope * val + offset;
+}
+
+/*
+ * Convert a temperature value (millidegree celsius) to a HW code
+ *
+ * @temp: temperature to convert
+ * @low: if true, round toward the low side
+ */
+static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz,
+ int temp, bool low)
+{
+ int slope, offset;
+
+ if (temp < AVS_TMON_TEMP_MIN)
+ return AVS_TMON_TEMP_MAX; /* Maximum code value */
+
+ avs_tmon_get_coeffs(tz, &slope, &offset);
+
+ if (temp >= offset)
+ return 0; /* Minimum code value */
+
+ if (low)
+ return (u32)(DIV_ROUND_UP(offset - temp, abs(slope)));
+ else
+ return (u32)((offset - temp) / abs(slope));
+}
+
+static int brcmstb_get_temp(void *data, int *temp)
+{
+ struct brcmstb_thermal_priv *priv = data;
+ u32 val;
+ long t;
+
+ val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
+
+ if (!(val & AVS_TMON_STATUS_valid_msk)) {
+ dev_err(priv->dev, "reading not valid\n");
+ return -EIO;
+ }
+
+ val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
+
+ t = avs_tmon_code_to_temp(priv->thermal, val);
+ if (t < 0)
+ *temp = 0;
+ else
+ *temp = t;
+
+ return 0;
+}
+
+static void avs_tmon_trip_enable(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type, int en)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val = __raw_readl(priv->tmon_base + trip->enable_offs);
+
+ dev_dbg(priv->dev, "%sable trip, type %d\n", en ? "en" : "dis", type);
+
+ if (en)
+ val |= trip->enable_mask;
+ else
+ val &= ~trip->enable_mask;
+
+ __raw_writel(val, priv->tmon_base + trip->enable_offs);
+}
+
+static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val = __raw_readl(priv->tmon_base + trip->reg_offs);
+
+ val &= trip->reg_msk;
+ val >>= trip->reg_shift;
+
+ return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type,
+ int temp)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val, orig;
+
+ dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
+
+ /* round toward low temp for the low interrupt */
+ val = avs_tmon_temp_to_code(priv->thermal, temp,
+ type == TMON_TRIP_TYPE_LOW);
+
+ val <<= trip->reg_shift;
+ val &= trip->reg_msk;
+
+ orig = __raw_readl(priv->tmon_base + trip->reg_offs);
+ orig &= ~trip->reg_msk;
+ orig |= val;
+ __raw_writel(orig, priv->tmon_base + trip->reg_offs);
+}
+
+static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
+{
+ u32 val;
+
+ val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
+ return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
+{
+ struct brcmstb_thermal_priv *priv = data;
+ int low, high, intr;
+
+ low = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_LOW);
+ high = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_HIGH);
+ intr = avs_tmon_get_intr_temp(priv);
+
+ dev_dbg(priv->dev, "low/intr/high: %d/%d/%d\n",
+ low, intr, high);
+
+ /* Disable high-temp until next threshold shift */
+ if (intr >= high)
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+ /* Disable low-temp until next threshold shift */
+ if (intr <= low)
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+
+ /*
+ * Notify using the interrupt temperature, in case the temperature
+ * changes before it can next be read out
+ */
+ thermal_zone_device_update(priv->thermal, intr);
+
+ return IRQ_HANDLED;
+}
+
+static int brcmstb_set_trips(void *data, int low, int high)
+{
+ struct brcmstb_thermal_priv *priv = data;
+
+ dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
+
+ if (low) {
+ if (low > INT_MAX)
+ low = INT_MAX;
+ avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
+ } else {
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+ }
+
+ if (high < ULONG_MAX) {
+ if (high > INT_MAX)
+ high = INT_MAX;
+ avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
+ } else {
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+ }
+
+ return 0;
+}
+
+static struct thermal_zone_of_device_ops of_ops = {
+ .get_temp = brcmstb_get_temp,
+ .set_trips = brcmstb_set_trips,
+};
+
+static const struct of_device_id brcmstb_thermal_id_table[] = {
+ { .compatible = "brcm,avs-tmon" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
+
+static int brcmstb_thermal_probe(struct platform_device *pdev)
+{
+ struct thermal_zone_device *thermal;
+ struct brcmstb_thermal_priv *priv;
+ struct resource *res;
+ int irq, ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->tmon_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->tmon_base))
+ return PTR_ERR(priv->tmon_base);
+
+ priv->dev = &pdev->dev;
+ platform_set_drvdata(pdev, priv);
+
+ thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops);
+ if (IS_ERR(thermal)) {
+ ret = PTR_ERR(thermal);
+ dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
+ return ret;
+ }
+
+ priv->thermal = thermal;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "could not get IRQ\n");
+ ret = irq;
+ goto err;
+ }
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ brcmstb_tmon_irq_thread, IRQF_ONESHOT,
+ DRV_NAME, priv);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not request IRQ: %d\n", ret);
+ goto err;
+ }
+
+ dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n");
+
+ return 0;
+
+err:
+ thermal_zone_of_sensor_unregister(&pdev->dev, thermal);
+ return ret;
+}
+
+static int brcmstb_thermal_exit(struct platform_device *pdev)
+{
+ struct brcmstb_thermal_priv *priv = platform_get_drvdata(pdev);
+ struct thermal_zone_device *thermal = priv->thermal;
+
+ if (thermal)
+ thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal);
+
+ return 0;
+}
+
+static struct platform_driver brcmstb_thermal_driver = {
+ .probe = brcmstb_thermal_probe,
+ .remove = brcmstb_thermal_exit,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = brcmstb_thermal_id_table,
+ },
+};
+module_platform_driver(brcmstb_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("Broadcom STB AVS TMON thermal driver");
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v3 3/4] ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
2017-07-31 19:26 ` Markus Mayer
@ 2017-07-31 19:26 ` Markus Mayer
-1 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: Zhang Rui, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Markus Mayer, Broadcom Kernel List, Power Management List,
Device Tree List, ARM Kernel List, Linux Kernel Mailing List
From: Markus Mayer <mmayer@broadcom.com>
Turn on CONFIG_BRCMSTB_THERMAL as module.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 4d19c1b..230f7fa 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -455,6 +455,7 @@ CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_INA2XX=m
CONFIG_CPU_THERMAL=y
+CONFIG_BRCMSTB_THERMAL=m
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v3 3/4] ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
@ 2017-07-31 19:26 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: linux-arm-kernel
From: Markus Mayer <mmayer@broadcom.com>
Turn on CONFIG_BRCMSTB_THERMAL as module.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 4d19c1b..230f7fa 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -455,6 +455,7 @@ CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_INA2XX=m
CONFIG_CPU_THERMAL=y
+CONFIG_BRCMSTB_THERMAL=m
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v3 4/4] arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
2017-07-31 19:26 ` Markus Mayer
@ 2017-07-31 19:26 ` Markus Mayer
-1 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: Zhang Rui, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Markus Mayer, Broadcom Kernel List, Power Management List,
Device Tree List, ARM Kernel List, Linux Kernel Mailing List
From: Markus Mayer <mmayer@broadcom.com>
Turn on CONFIG_BRCMSTB_THERMAL as module.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 6c7d147..2449064 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -304,6 +304,7 @@ CONFIG_SENSORS_INA2XX=m
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
+CONFIG_BRCMSTB_THERMAL=m
CONFIG_EXYNOS_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=m
CONFIG_WATCHDOG=y
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v3 4/4] arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
@ 2017-07-31 19:26 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-07-31 19:26 UTC (permalink / raw)
To: linux-arm-kernel
From: Markus Mayer <mmayer@broadcom.com>
Turn on CONFIG_BRCMSTB_THERMAL as module.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 6c7d147..2449064 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -304,6 +304,7 @@ CONFIG_SENSORS_INA2XX=m
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
+CONFIG_BRCMSTB_THERMAL=m
CONFIG_EXYNOS_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=m
CONFIG_WATCHDOG=y
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH v3 0/4] thermal: add brcmstb AVS TMON driver
2017-07-31 19:26 ` Markus Mayer
@ 2017-08-07 17:52 ` Florian Fainelli
-1 siblings, 0 replies; 22+ messages in thread
From: Florian Fainelli @ 2017-08-07 17:52 UTC (permalink / raw)
To: Markus Mayer, Zhang Rui, Eduardo Valentin, Rob Herring,
Mark Rutland, Doug Berger, Brian Norris, Gregory Fong,
Florian Fainelli, Rafał Miłecki, Russell King,
Catalin Marinas, Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Markus Mayer, Broadcom Kernel List, Power Management List,
Device Tree List, ARM Kernel List, Linux Kernel Mailing List
On 07/31/2017 12:26 PM, Markus Mayer wrote:
> From: Markus Mayer <mmayer@broadcom.com>
>
> This series adds the brcmstb AVS TMON driver.
>
> The driver was originally written by Brian Norris.
>
> v1 of this series can be found at https://lkml.org/lkml/2017/6/5/921
> v2 of this series can be found at https://lkml.org/lkml/2017/7/21/585
FWIW, this looks good to me, Eduardo, Rui, can we get this moving?
>
> Changes since v2:
> - replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4 only]
> - all other patches are unchanged from v2
>
> Changes since v1:
> - Fixed wording in binding document
> - Fixed lincensing to consistently mention GPL v2
> - Use thermal_zone_get_slope() and thermal_zone_get_offset()
> - Some minor clean-ups
>
> Brian Norris (2):
> Documentation: devicetree: add binding for Broadcom STB AVS TMON
> thermal: add brcmstb AVS TMON driver
>
> Markus Mayer (2):
> ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
> arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
>
> .../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20 ++
> MAINTAINERS | 8 +
> arch/arm/configs/multi_v7_defconfig | 1 +
> arch/arm64/configs/defconfig | 1 +
> drivers/thermal/Kconfig | 2 +-
> drivers/thermal/broadcom/Kconfig | 7 +
> drivers/thermal/broadcom/Makefile | 1 +
> drivers/thermal/broadcom/brcmstb_thermal.c | 386 +++++++++++++++++++++
> 8 files changed, 425 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
> create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
>
--
Florian
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 0/4] thermal: add brcmstb AVS TMON driver
@ 2017-08-07 17:52 ` Florian Fainelli
0 siblings, 0 replies; 22+ messages in thread
From: Florian Fainelli @ 2017-08-07 17:52 UTC (permalink / raw)
To: linux-arm-kernel
On 07/31/2017 12:26 PM, Markus Mayer wrote:
> From: Markus Mayer <mmayer@broadcom.com>
>
> This series adds the brcmstb AVS TMON driver.
>
> The driver was originally written by Brian Norris.
>
> v1 of this series can be found at https://lkml.org/lkml/2017/6/5/921
> v2 of this series can be found at https://lkml.org/lkml/2017/7/21/585
FWIW, this looks good to me, Eduardo, Rui, can we get this moving?
>
> Changes since v2:
> - replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4 only]
> - all other patches are unchanged from v2
>
> Changes since v1:
> - Fixed wording in binding document
> - Fixed lincensing to consistently mention GPL v2
> - Use thermal_zone_get_slope() and thermal_zone_get_offset()
> - Some minor clean-ups
>
> Brian Norris (2):
> Documentation: devicetree: add binding for Broadcom STB AVS TMON
> thermal: add brcmstb AVS TMON driver
>
> Markus Mayer (2):
> ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
> arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
>
> .../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20 ++
> MAINTAINERS | 8 +
> arch/arm/configs/multi_v7_defconfig | 1 +
> arch/arm64/configs/defconfig | 1 +
> drivers/thermal/Kconfig | 2 +-
> drivers/thermal/broadcom/Kconfig | 7 +
> drivers/thermal/broadcom/Makefile | 1 +
> drivers/thermal/broadcom/brcmstb_thermal.c | 386 +++++++++++++++++++++
> 8 files changed, 425 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
> create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
>
--
Florian
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 0/4] thermal: add brcmstb AVS TMON driver
2017-08-07 17:52 ` Florian Fainelli
@ 2017-08-08 12:26 ` Zhang Rui
-1 siblings, 0 replies; 22+ messages in thread
From: Zhang Rui @ 2017-08-08 12:26 UTC (permalink / raw)
To: Florian Fainelli, Markus Mayer, Eduardo Valentin, Rob Herring,
Mark Rutland, Doug Berger, Brian Norris, Gregory Fong,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Markus Mayer, Broadcom Kernel List, Power Management List,
Device Tree List, ARM Kernel List, Linux Kernel Mailing List
On Mon, 2017-08-07 at 10:52 -0700, Florian Fainelli wrote:
> On 07/31/2017 12:26 PM, Markus Mayer wrote:
> >
> > From: Markus Mayer <mmayer@broadcom.com>
> >
> > This series adds the brcmstb AVS TMON driver.
> >
> > The driver was originally written by Brian Norris.
> >
> > v1 of this series can be found at https://lkml.org/lkml/2017/6/5/92
> > 1
> > v2 of this series can be found at https://lkml.org/lkml/2017/7/21/5
> > 85
> FWIW, this looks good to me, Eduardo, Rui, can we get this moving?
>
Usually, Eduardo will take the arm soc thermal patches. But he is not
able to take it this time as he is really busy.
To me, the thermal framework related code looks good, and I will queue
it for next merge window, although I don't have the knowledge about the
hardware details.
thanks,
rui
> >
> >
> > Changes since v2:
> > - replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4
> > only]
> > - all other patches are unchanged from v2
> >
> > Changes since v1:
> > - Fixed wording in binding document
> > - Fixed lincensing to consistently mention GPL v2
> > - Use thermal_zone_get_slope() and thermal_zone_get_offset()
> > - Some minor clean-ups
> >
> > Brian Norris (2):
> > Documentation: devicetree: add binding for Broadcom STB AVS TMON
> > thermal: add brcmstb AVS TMON driver
> >
> > Markus Mayer (2):
> > ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
> > arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
> >
> > .../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20 ++
> > MAINTAINERS | 8 +
> > arch/arm/configs/multi_v7_defconfig | 1 +
> > arch/arm64/configs/defconfig | 1 +
> > drivers/thermal/Kconfig | 2 +-
> > drivers/thermal/broadcom/Kconfig | 7 +
> > drivers/thermal/broadcom/Makefile | 1 +
> > drivers/thermal/broadcom/brcmstb_thermal.c | 386
> > +++++++++++++++++++++
> > 8 files changed, 425 insertions(+), 1 deletion(-)
> > create mode 100644
> > Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
> > create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
> >
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 0/4] thermal: add brcmstb AVS TMON driver
@ 2017-08-08 12:26 ` Zhang Rui
0 siblings, 0 replies; 22+ messages in thread
From: Zhang Rui @ 2017-08-08 12:26 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 2017-08-07 at 10:52 -0700, Florian Fainelli wrote:
> On 07/31/2017 12:26 PM, Markus Mayer wrote:
> >
> > From: Markus Mayer <mmayer@broadcom.com>
> >
> > This series adds the brcmstb AVS TMON driver.
> >
> > The driver was originally written by Brian Norris.
> >
> > v1 of this series can be found at https://lkml.org/lkml/2017/6/5/92
> > 1
> > v2 of this series can be found at https://lkml.org/lkml/2017/7/21/5
> > 85
> FWIW, this looks good to me, Eduardo, Rui, can we get this moving?
>
Usually, Eduardo will take the arm soc thermal patches. But he is not
able to take it this time as he is really busy.
To me, the thermal framework related code looks good, and I will queue
it for next merge window, although I don't have the knowledge about the
hardware details.
thanks,
rui
> >
> >
> > Changes since v2:
> > - replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4
> > only]
> > - all other patches are unchanged from v2
> >
> > Changes since v1:
> > - Fixed wording in binding document
> > - Fixed lincensing to consistently mention GPL v2
> > - Use thermal_zone_get_slope() and thermal_zone_get_offset()
> > - Some minor clean-ups
> >
> > Brian Norris (2):
> > ? Documentation: devicetree: add binding for Broadcom STB AVS TMON
> > ? thermal: add brcmstb AVS TMON driver
> >
> > Markus Mayer (2):
> > ? ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
> > ? arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
> >
> > ?.../devicetree/bindings/thermal/brcm,avs-tmon.txt??|??20 ++
> > ?MAINTAINERS????????????????????????????????????????|???8 +
> > ?arch/arm/configs/multi_v7_defconfig????????????????|???1 +
> > ?arch/arm64/configs/defconfig???????????????????????|???1 +
> > ?drivers/thermal/Kconfig????????????????????????????|???2 +-
> > ?drivers/thermal/broadcom/Kconfig???????????????????|???7 +
> > ?drivers/thermal/broadcom/Makefile??????????????????|???1 +
> > ?drivers/thermal/broadcom/brcmstb_thermal.c?????????| 386
> > +++++++++++++++++++++
> > ?8 files changed, 425 insertions(+), 1 deletion(-)
> > ?create mode 100644
> > Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
> > ?create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
> >
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 1/4] Documentation: devicetree: add binding for Broadcom STB AVS TMON
2017-07-31 19:26 ` Markus Mayer
@ 2017-08-08 12:36 ` Zhang Rui
-1 siblings, 0 replies; 22+ messages in thread
From: Zhang Rui @ 2017-08-08 12:36 UTC (permalink / raw)
To: Markus Mayer, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Broadcom Kernel List, Power Management List, Device Tree List,
ARM Kernel List, Linux Kernel Mailing List, Markus Mayer
On Mon, 2017-07-31 at 12:26 -0700, Markus Mayer wrote:
> From: Brian Norris <computersforpeace@gmail.com>
>
> Add binding for Broadcom STB thermal.
>
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
$ file v3-1-4-Documentation-devicetree-add-binding-for-Broadcom-STB-
AVS-TMON.patch
unified diff output, UTF-8 Unicode text
BTW, can you please rebase this patch set on top of v4.13-rc3?
At least there are some conflicts in MAINTAINER file, introduced in
-rc2.
thanks,
rui
> ---
> .../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20
> ++++++++++++++++++++
> MAINTAINERS | 8 ++++++++
> 2 files changed, 28 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>
> diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-
> tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-
> tmon.txt
> new file mode 100644
> index 0000000..9d43553
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
> @@ -0,0 +1,20 @@
> +* Broadcom STB thermal management
> +
> +Thermal management core, provided by the AVS TMON hardware block.
> +
> +Required properties:
> +- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
> +- reg: address range for the AVS TMON registers
> +- interrupts: temperature monitor interrupt, for high/low threshold
> triggers
> +- interrupt-names: should be "tmon"
> +- interrupt-parent: the parent interrupt controller
> +
> +Example:
> +
> + thermal@f04d1500 {
> + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-
> tmon";
> + reg = <0xf04d1500 0x28>;
> + interrupts = <0x6>;
> + interrupt-names = "tmon";
> + interrupt-parent = <&avs_host_l2_intc>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 205d397..a683d4c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2928,6 +2928,14 @@ S: Maintained
> F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-
> cpu-freq.txt
> F: drivers/cpufreq/brcmstb*
>
> +BROADCOM STB AVS TMON DRIVER
> +M: Markus Mayer <mmayer@broadcom.com>
> +M: bcm-kernel-feedback-list@broadcom.com
> +L: linux-pm@vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/thermal/brcm,avs-
> tmon.txt
> +F: drivers/thermal/broadcom/brcmstb*
> +
> BROADCOM SPECIFIC AMBA DRIVER (BCMA)
> M: Rafał Miłecki <zajec5@gmail.com>
> L: linux-wireless@vger.kernel.org
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 1/4] Documentation: devicetree: add binding for Broadcom STB AVS TMON
@ 2017-08-08 12:36 ` Zhang Rui
0 siblings, 0 replies; 22+ messages in thread
From: Zhang Rui @ 2017-08-08 12:36 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 2017-07-31 at 12:26 -0700, Markus Mayer wrote:
> From: Brian Norris <computersforpeace@gmail.com>
>
> Add binding for Broadcom STB thermal.
>
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
$ file v3-1-4-Documentation-devicetree-add-binding-for-Broadcom-STB-
AVS-TMON.patch?
unified diff output, UTF-8 Unicode text
BTW, can you please rebase this patch set on top of v4.13-rc3?
At least there are some conflicts in MAINTAINER file, introduced in
-rc2.
thanks,
rui
> ---
> ?.../devicetree/bindings/thermal/brcm,avs-tmon.txt????| 20
> ++++++++++++++++++++
> ?MAINTAINERS??????????????????????????????????????????|??8 ++++++++
> ?2 files changed, 28 insertions(+)
> ?create mode 100644
> Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>
> diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-
> tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-
> tmon.txt
> new file mode 100644
> index 0000000..9d43553
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
> @@ -0,0 +1,20 @@
> +* Broadcom STB thermal management
> +
> +Thermal management core, provided by the AVS TMON hardware block.
> +
> +Required properties:
> +- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
> +- reg: address range for the AVS TMON registers
> +- interrupts: temperature monitor interrupt, for high/low threshold
> triggers
> +- interrupt-names: should be "tmon"
> +- interrupt-parent: the parent interrupt controller
> +
> +Example:
> +
> + thermal at f04d1500 {
> + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-
> tmon";
> + reg = <0xf04d1500 0x28>;
> + interrupts = <0x6>;
> + interrupt-names = "tmon";
> + interrupt-parent = <&avs_host_l2_intc>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 205d397..a683d4c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2928,6 +2928,14 @@ S: Maintained
> ?F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-
> cpu-freq.txt
> ?F: drivers/cpufreq/brcmstb*
> ?
> +BROADCOM STB AVS TMON DRIVER
> +M: Markus Mayer <mmayer@broadcom.com>
> +M: bcm-kernel-feedback-list at broadcom.com
> +L: linux-pm at vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/thermal/brcm,avs-
> tmon.txt
> +F: drivers/thermal/broadcom/brcmstb*
> +
> ?BROADCOM SPECIFIC AMBA DRIVER (BCMA)
> ?M: Rafa? Mi?ecki <zajec5@gmail.com>
> ?L: linux-wireless at vger.kernel.org
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 1/4] Documentation: devicetree: add binding for Broadcom STB AVS TMON
@ 2017-08-09 21:39 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-08-09 21:39 UTC (permalink / raw)
To: Zhang Rui
Cc: Markus Mayer, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson, Broadcom Kernel List,
Power Management List, Device Tree List, ARM Kernel List,
Linux Kernel Mailing List
On 8 August 2017 at 05:36, Zhang Rui <rui.zhang@intel.com> wrote:
> On Mon, 2017-07-31 at 12:26 -0700, Markus Mayer wrote:
>> From: Brian Norris <computersforpeace@gmail.com>
>>
>> Add binding for Broadcom STB thermal.
>>
>> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
>> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
>
> $ file v3-1-4-Documentation-devicetree-add-binding-for-Broadcom-STB-
> AVS-TMON.patch
> unified diff output, UTF-8 Unicode text
It's UTF-8 encoded, because of Rafał's name in the recipient list.
> BTW, can you please rebase this patch set on top of v4.13-rc3?
> At least there are some conflicts in MAINTAINER file, introduced in
> -rc2.
I'll send the rebased series shortly.
> thanks,
> rui
>> ---
>> .../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20
>> ++++++++++++++++++++
>> MAINTAINERS | 8 ++++++++
>> 2 files changed, 28 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-
>> tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-
>> tmon.txt
>> new file mode 100644
>> index 0000000..9d43553
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>> @@ -0,0 +1,20 @@
>> +* Broadcom STB thermal management
>> +
>> +Thermal management core, provided by the AVS TMON hardware block.
>> +
>> +Required properties:
>> +- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
>> +- reg: address range for the AVS TMON registers
>> +- interrupts: temperature monitor interrupt, for high/low threshold
>> triggers
>> +- interrupt-names: should be "tmon"
>> +- interrupt-parent: the parent interrupt controller
>> +
>> +Example:
>> +
>> + thermal@f04d1500 {
>> + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-
>> tmon";
>> + reg = <0xf04d1500 0x28>;
>> + interrupts = <0x6>;
>> + interrupt-names = "tmon";
>> + interrupt-parent = <&avs_host_l2_intc>;
>> + };
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 205d397..a683d4c 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -2928,6 +2928,14 @@ S: Maintained
>> F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-
>> cpu-freq.txt
>> F: drivers/cpufreq/brcmstb*
>>
>> +BROADCOM STB AVS TMON DRIVER
>> +M: Markus Mayer <mmayer@broadcom.com>
>> +M: bcm-kernel-feedback-list@broadcom.com
>> +L: linux-pm@vger.kernel.org
>> +S: Maintained
>> +F: Documentation/devicetree/bindings/thermal/brcm,avs-
>> tmon.txt
>> +F: drivers/thermal/broadcom/brcmstb*
>> +
>> BROADCOM SPECIFIC AMBA DRIVER (BCMA)
>> M: Rafał Miłecki <zajec5@gmail.com>
>> L: linux-wireless@vger.kernel.org
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH v3 1/4] Documentation: devicetree: add binding for Broadcom STB AVS TMON
@ 2017-08-09 21:39 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-08-09 21:39 UTC (permalink / raw)
To: Zhang Rui
Cc: Markus Mayer, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson, Broadcom Kernel List,
Power Management List, Device Tree List, ARM Kernel List
On 8 August 2017 at 05:36, Zhang Rui <rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> wrote:
> On Mon, 2017-07-31 at 12:26 -0700, Markus Mayer wrote:
>> From: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>
>> Add binding for Broadcom STB thermal.
>>
>> Signed-off-by: Brian Norris <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> Signed-off-by: Markus Mayer <mmayer-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>
> $ file v3-1-4-Documentation-devicetree-add-binding-for-Broadcom-STB-
> AVS-TMON.patch
> unified diff output, UTF-8 Unicode text
It's UTF-8 encoded, because of Rafał's name in the recipient list.
> BTW, can you please rebase this patch set on top of v4.13-rc3?
> At least there are some conflicts in MAINTAINER file, introduced in
> -rc2.
I'll send the rebased series shortly.
> thanks,
> rui
>> ---
>> .../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20
>> ++++++++++++++++++++
>> MAINTAINERS | 8 ++++++++
>> 2 files changed, 28 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-
>> tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-
>> tmon.txt
>> new file mode 100644
>> index 0000000..9d43553
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>> @@ -0,0 +1,20 @@
>> +* Broadcom STB thermal management
>> +
>> +Thermal management core, provided by the AVS TMON hardware block.
>> +
>> +Required properties:
>> +- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
>> +- reg: address range for the AVS TMON registers
>> +- interrupts: temperature monitor interrupt, for high/low threshold
>> triggers
>> +- interrupt-names: should be "tmon"
>> +- interrupt-parent: the parent interrupt controller
>> +
>> +Example:
>> +
>> + thermal@f04d1500 {
>> + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-
>> tmon";
>> + reg = <0xf04d1500 0x28>;
>> + interrupts = <0x6>;
>> + interrupt-names = "tmon";
>> + interrupt-parent = <&avs_host_l2_intc>;
>> + };
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 205d397..a683d4c 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -2928,6 +2928,14 @@ S: Maintained
>> F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-
>> cpu-freq.txt
>> F: drivers/cpufreq/brcmstb*
>>
>> +BROADCOM STB AVS TMON DRIVER
>> +M: Markus Mayer <mmayer-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> +M: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org
>> +L: linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> +S: Maintained
>> +F: Documentation/devicetree/bindings/thermal/brcm,avs-
>> tmon.txt
>> +F: drivers/thermal/broadcom/brcmstb*
>> +
>> BROADCOM SPECIFIC AMBA DRIVER (BCMA)
>> M: Rafał Miłecki <zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> L: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 1/4] Documentation: devicetree: add binding for Broadcom STB AVS TMON
@ 2017-08-09 21:39 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-08-09 21:39 UTC (permalink / raw)
To: linux-arm-kernel
On 8 August 2017 at 05:36, Zhang Rui <rui.zhang@intel.com> wrote:
> On Mon, 2017-07-31 at 12:26 -0700, Markus Mayer wrote:
>> From: Brian Norris <computersforpeace@gmail.com>
>>
>> Add binding for Broadcom STB thermal.
>>
>> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
>> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
>
> $ file v3-1-4-Documentation-devicetree-add-binding-for-Broadcom-STB-
> AVS-TMON.patch
> unified diff output, UTF-8 Unicode text
It's UTF-8 encoded, because of Rafa?'s name in the recipient list.
> BTW, can you please rebase this patch set on top of v4.13-rc3?
> At least there are some conflicts in MAINTAINER file, introduced in
> -rc2.
I'll send the rebased series shortly.
> thanks,
> rui
>> ---
>> .../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20
>> ++++++++++++++++++++
>> MAINTAINERS | 8 ++++++++
>> 2 files changed, 28 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-
>> tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-
>> tmon.txt
>> new file mode 100644
>> index 0000000..9d43553
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>> @@ -0,0 +1,20 @@
>> +* Broadcom STB thermal management
>> +
>> +Thermal management core, provided by the AVS TMON hardware block.
>> +
>> +Required properties:
>> +- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
>> +- reg: address range for the AVS TMON registers
>> +- interrupts: temperature monitor interrupt, for high/low threshold
>> triggers
>> +- interrupt-names: should be "tmon"
>> +- interrupt-parent: the parent interrupt controller
>> +
>> +Example:
>> +
>> + thermal at f04d1500 {
>> + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-
>> tmon";
>> + reg = <0xf04d1500 0x28>;
>> + interrupts = <0x6>;
>> + interrupt-names = "tmon";
>> + interrupt-parent = <&avs_host_l2_intc>;
>> + };
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 205d397..a683d4c 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -2928,6 +2928,14 @@ S: Maintained
>> F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-
>> cpu-freq.txt
>> F: drivers/cpufreq/brcmstb*
>>
>> +BROADCOM STB AVS TMON DRIVER
>> +M: Markus Mayer <mmayer@broadcom.com>
>> +M: bcm-kernel-feedback-list at broadcom.com
>> +L: linux-pm at vger.kernel.org
>> +S: Maintained
>> +F: Documentation/devicetree/bindings/thermal/brcm,avs-
>> tmon.txt
>> +F: drivers/thermal/broadcom/brcmstb*
>> +
>> BROADCOM SPECIFIC AMBA DRIVER (BCMA)
>> M: Rafa? Mi?ecki <zajec5@gmail.com>
>> L: linux-wireless at vger.kernel.org
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 2/4] thermal: add brcmstb AVS TMON driver
2017-08-09 21:56 Markus Mayer
@ 2017-08-09 21:56 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-08-09 21:56 UTC (permalink / raw)
To: Zhang Rui, Eduardo Valentin, Rob Herring, Mark Rutland,
Doug Berger, Brian Norris, Gregory Fong, Florian Fainelli,
Rafał Miłecki, Russell King, Catalin Marinas,
Will Deacon, Arnd Bergmann, Olof Johansson
Cc: Broadcom Kernel List, Power Management List, Device Tree List,
ARM Kernel List, Linux Kernel Mailing List, Markus Mayer
From: Brian Norris <computersforpeace@gmail.com>
The AVS TMON core provides temperature readings, a pair of configurable
high- and low-temperature threshold interrupts, and an emergency
over-temperature chip reset. The driver utilizes the first two to
provide temperature readings and high-temperature notifications to
applications. The over-temperature reset is not exposed to
applications; this reset threshold is critical to the system and should
be set with care within the bootloader.
Applications may choose to utilize the notification mechanism, the
temperature reading mechanism (e.g., through polling), or both.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
drivers/thermal/Kconfig | 2 +-
drivers/thermal/broadcom/Kconfig | 7 +
drivers/thermal/broadcom/Makefile | 1 +
drivers/thermal/broadcom/brcmstb_thermal.c | 386 +++++++++++++++++++++++++++++
4 files changed, 395 insertions(+), 1 deletion(-)
create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index b5b5fac..396ad6b 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -408,7 +408,7 @@ config MTK_THERMAL
controller present in Mediatek SoCs
menu "Broadcom thermal drivers"
-depends on ARCH_BCM || COMPILE_TEST
+depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
source "drivers/thermal/broadcom/Kconfig"
endmenu
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index 42c098e..c106a15 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -6,6 +6,13 @@ config BCM2835_THERMAL
help
Support for thermal sensors on Broadcom bcm2835 SoCs.
+config BRCMSTB_THERMAL
+ tristate "Broadcom STB AVS TMON thermal driver"
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ help
+ Enable this driver if you have a Broadcom STB SoC and would like
+ thermal framework support.
+
config BCM_NS_THERMAL
tristate "Northstar thermal driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile
index c6f62e4..fae10ec 100644
--- a/drivers/thermal/broadcom/Makefile
+++ b/drivers/thermal/broadcom/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o
+obj-$(CONFIG_BRCMSTB_THERMAL) += brcmstb_thermal.o
obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
new file mode 100644
index 0000000..87b8e7a
--- /dev/null
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -0,0 +1,386 @@
+/*
+ * Broadcom STB AVS TMON thermal sensor driver
+ *
+ * Copyright (c) 2015-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define DRV_NAME "brcmstb_thermal"
+
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/thermal.h>
+
+#define AVS_TMON_STATUS 0x00
+ #define AVS_TMON_STATUS_valid_msk BIT(11)
+ #define AVS_TMON_STATUS_data_msk GENMASK(10, 1)
+ #define AVS_TMON_STATUS_data_shift 1
+
+#define AVS_TMON_EN_OVERTEMP_RESET 0x04
+ #define AVS_TMON_EN_OVERTEMP_RESET_msk BIT(0)
+
+#define AVS_TMON_RESET_THRESH 0x08
+ #define AVS_TMON_RESET_THRESH_msk GENMASK(10, 1)
+ #define AVS_TMON_RESET_THRESH_shift 1
+
+#define AVS_TMON_INT_IDLE_TIME 0x10
+
+#define AVS_TMON_EN_TEMP_INT_SRCS 0x14
+ #define AVS_TMON_EN_TEMP_INT_SRCS_high BIT(1)
+ #define AVS_TMON_EN_TEMP_INT_SRCS_low BIT(0)
+
+#define AVS_TMON_INT_THRESH 0x18
+ #define AVS_TMON_INT_THRESH_high_msk GENMASK(26, 17)
+ #define AVS_TMON_INT_THRESH_high_shift 17
+ #define AVS_TMON_INT_THRESH_low_msk GENMASK(10, 1)
+ #define AVS_TMON_INT_THRESH_low_shift 1
+
+#define AVS_TMON_TEMP_INT_CODE 0x1c
+#define AVS_TMON_TP_TEST_ENABLE 0x20
+
+/* Default coefficients */
+#define AVS_TMON_TEMP_SLOPE -487
+#define AVS_TMON_TEMP_OFFSET 410040
+
+/* HW related temperature constants */
+#define AVS_TMON_TEMP_MAX 0x3ff
+#define AVS_TMON_TEMP_MIN -88161
+#define AVS_TMON_TEMP_MASK AVS_TMON_TEMP_MAX
+
+enum avs_tmon_trip_type {
+ TMON_TRIP_TYPE_LOW = 0,
+ TMON_TRIP_TYPE_HIGH,
+ TMON_TRIP_TYPE_RESET,
+ TMON_TRIP_TYPE_MAX,
+};
+
+struct avs_tmon_trip {
+ /* HW bit to enable the trip */
+ u32 enable_offs;
+ u32 enable_mask;
+
+ /* HW field to read the trip temperature */
+ u32 reg_offs;
+ u32 reg_msk;
+ int reg_shift;
+};
+
+static struct avs_tmon_trip avs_tmon_trips[] = {
+ /* Trips when temperature is below threshold */
+ [TMON_TRIP_TYPE_LOW] = {
+ .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS,
+ .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_low,
+ .reg_offs = AVS_TMON_INT_THRESH,
+ .reg_msk = AVS_TMON_INT_THRESH_low_msk,
+ .reg_shift = AVS_TMON_INT_THRESH_low_shift,
+ },
+ /* Trips when temperature is above threshold */
+ [TMON_TRIP_TYPE_HIGH] = {
+ .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS,
+ .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_high,
+ .reg_offs = AVS_TMON_INT_THRESH,
+ .reg_msk = AVS_TMON_INT_THRESH_high_msk,
+ .reg_shift = AVS_TMON_INT_THRESH_high_shift,
+ },
+ /* Automatically resets chip when above threshold */
+ [TMON_TRIP_TYPE_RESET] = {
+ .enable_offs = AVS_TMON_EN_OVERTEMP_RESET,
+ .enable_mask = AVS_TMON_EN_OVERTEMP_RESET_msk,
+ .reg_offs = AVS_TMON_RESET_THRESH,
+ .reg_msk = AVS_TMON_RESET_THRESH_msk,
+ .reg_shift = AVS_TMON_RESET_THRESH_shift,
+ },
+};
+
+struct brcmstb_thermal_priv {
+ void __iomem *tmon_base;
+ struct device *dev;
+ struct thermal_zone_device *thermal;
+};
+
+static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope,
+ int *offset)
+{
+ *slope = thermal_zone_get_slope(tz);
+ *offset = thermal_zone_get_offset(tz);
+}
+
+/* Convert a HW code to a temperature reading (millidegree celsius) */
+static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
+ u32 code)
+{
+ const int val = code & AVS_TMON_TEMP_MASK;
+ int slope, offset;
+
+ avs_tmon_get_coeffs(tz, &slope, &offset);
+
+ return slope * val + offset;
+}
+
+/*
+ * Convert a temperature value (millidegree celsius) to a HW code
+ *
+ * @temp: temperature to convert
+ * @low: if true, round toward the low side
+ */
+static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz,
+ int temp, bool low)
+{
+ int slope, offset;
+
+ if (temp < AVS_TMON_TEMP_MIN)
+ return AVS_TMON_TEMP_MAX; /* Maximum code value */
+
+ avs_tmon_get_coeffs(tz, &slope, &offset);
+
+ if (temp >= offset)
+ return 0; /* Minimum code value */
+
+ if (low)
+ return (u32)(DIV_ROUND_UP(offset - temp, abs(slope)));
+ else
+ return (u32)((offset - temp) / abs(slope));
+}
+
+static int brcmstb_get_temp(void *data, int *temp)
+{
+ struct brcmstb_thermal_priv *priv = data;
+ u32 val;
+ long t;
+
+ val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
+
+ if (!(val & AVS_TMON_STATUS_valid_msk)) {
+ dev_err(priv->dev, "reading not valid\n");
+ return -EIO;
+ }
+
+ val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
+
+ t = avs_tmon_code_to_temp(priv->thermal, val);
+ if (t < 0)
+ *temp = 0;
+ else
+ *temp = t;
+
+ return 0;
+}
+
+static void avs_tmon_trip_enable(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type, int en)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val = __raw_readl(priv->tmon_base + trip->enable_offs);
+
+ dev_dbg(priv->dev, "%sable trip, type %d\n", en ? "en" : "dis", type);
+
+ if (en)
+ val |= trip->enable_mask;
+ else
+ val &= ~trip->enable_mask;
+
+ __raw_writel(val, priv->tmon_base + trip->enable_offs);
+}
+
+static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val = __raw_readl(priv->tmon_base + trip->reg_offs);
+
+ val &= trip->reg_msk;
+ val >>= trip->reg_shift;
+
+ return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type,
+ int temp)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val, orig;
+
+ dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
+
+ /* round toward low temp for the low interrupt */
+ val = avs_tmon_temp_to_code(priv->thermal, temp,
+ type == TMON_TRIP_TYPE_LOW);
+
+ val <<= trip->reg_shift;
+ val &= trip->reg_msk;
+
+ orig = __raw_readl(priv->tmon_base + trip->reg_offs);
+ orig &= ~trip->reg_msk;
+ orig |= val;
+ __raw_writel(orig, priv->tmon_base + trip->reg_offs);
+}
+
+static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
+{
+ u32 val;
+
+ val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
+ return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
+{
+ struct brcmstb_thermal_priv *priv = data;
+ int low, high, intr;
+
+ low = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_LOW);
+ high = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_HIGH);
+ intr = avs_tmon_get_intr_temp(priv);
+
+ dev_dbg(priv->dev, "low/intr/high: %d/%d/%d\n",
+ low, intr, high);
+
+ /* Disable high-temp until next threshold shift */
+ if (intr >= high)
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+ /* Disable low-temp until next threshold shift */
+ if (intr <= low)
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+
+ /*
+ * Notify using the interrupt temperature, in case the temperature
+ * changes before it can next be read out
+ */
+ thermal_zone_device_update(priv->thermal, intr);
+
+ return IRQ_HANDLED;
+}
+
+static int brcmstb_set_trips(void *data, int low, int high)
+{
+ struct brcmstb_thermal_priv *priv = data;
+
+ dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
+
+ if (low) {
+ if (low > INT_MAX)
+ low = INT_MAX;
+ avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
+ } else {
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+ }
+
+ if (high < ULONG_MAX) {
+ if (high > INT_MAX)
+ high = INT_MAX;
+ avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
+ } else {
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+ }
+
+ return 0;
+}
+
+static struct thermal_zone_of_device_ops of_ops = {
+ .get_temp = brcmstb_get_temp,
+ .set_trips = brcmstb_set_trips,
+};
+
+static const struct of_device_id brcmstb_thermal_id_table[] = {
+ { .compatible = "brcm,avs-tmon" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
+
+static int brcmstb_thermal_probe(struct platform_device *pdev)
+{
+ struct thermal_zone_device *thermal;
+ struct brcmstb_thermal_priv *priv;
+ struct resource *res;
+ int irq, ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->tmon_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->tmon_base))
+ return PTR_ERR(priv->tmon_base);
+
+ priv->dev = &pdev->dev;
+ platform_set_drvdata(pdev, priv);
+
+ thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops);
+ if (IS_ERR(thermal)) {
+ ret = PTR_ERR(thermal);
+ dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
+ return ret;
+ }
+
+ priv->thermal = thermal;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "could not get IRQ\n");
+ ret = irq;
+ goto err;
+ }
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ brcmstb_tmon_irq_thread, IRQF_ONESHOT,
+ DRV_NAME, priv);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not request IRQ: %d\n", ret);
+ goto err;
+ }
+
+ dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n");
+
+ return 0;
+
+err:
+ thermal_zone_of_sensor_unregister(&pdev->dev, thermal);
+ return ret;
+}
+
+static int brcmstb_thermal_exit(struct platform_device *pdev)
+{
+ struct brcmstb_thermal_priv *priv = platform_get_drvdata(pdev);
+ struct thermal_zone_device *thermal = priv->thermal;
+
+ if (thermal)
+ thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal);
+
+ return 0;
+}
+
+static struct platform_driver brcmstb_thermal_driver = {
+ .probe = brcmstb_thermal_probe,
+ .remove = brcmstb_thermal_exit,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = brcmstb_thermal_id_table,
+ },
+};
+module_platform_driver(brcmstb_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("Broadcom STB AVS TMON thermal driver");
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH v3 2/4] thermal: add brcmstb AVS TMON driver
@ 2017-08-09 21:56 ` Markus Mayer
0 siblings, 0 replies; 22+ messages in thread
From: Markus Mayer @ 2017-08-09 21:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Brian Norris <computersforpeace@gmail.com>
The AVS TMON core provides temperature readings, a pair of configurable
high- and low-temperature threshold interrupts, and an emergency
over-temperature chip reset. The driver utilizes the first two to
provide temperature readings and high-temperature notifications to
applications. The over-temperature reset is not exposed to
applications; this reset threshold is critical to the system and should
be set with care within the bootloader.
Applications may choose to utilize the notification mechanism, the
temperature reading mechanism (e.g., through polling), or both.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
drivers/thermal/Kconfig | 2 +-
drivers/thermal/broadcom/Kconfig | 7 +
drivers/thermal/broadcom/Makefile | 1 +
drivers/thermal/broadcom/brcmstb_thermal.c | 386 +++++++++++++++++++++++++++++
4 files changed, 395 insertions(+), 1 deletion(-)
create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index b5b5fac..396ad6b 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -408,7 +408,7 @@ config MTK_THERMAL
controller present in Mediatek SoCs
menu "Broadcom thermal drivers"
-depends on ARCH_BCM || COMPILE_TEST
+depends on ARCH_BCM || ARCH_BRCMSTB || COMPILE_TEST
source "drivers/thermal/broadcom/Kconfig"
endmenu
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index 42c098e..c106a15 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -6,6 +6,13 @@ config BCM2835_THERMAL
help
Support for thermal sensors on Broadcom bcm2835 SoCs.
+config BRCMSTB_THERMAL
+ tristate "Broadcom STB AVS TMON thermal driver"
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ help
+ Enable this driver if you have a Broadcom STB SoC and would like
+ thermal framework support.
+
config BCM_NS_THERMAL
tristate "Northstar thermal driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile
index c6f62e4..fae10ec 100644
--- a/drivers/thermal/broadcom/Makefile
+++ b/drivers/thermal/broadcom/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o
+obj-$(CONFIG_BRCMSTB_THERMAL) += brcmstb_thermal.o
obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
new file mode 100644
index 0000000..87b8e7a
--- /dev/null
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -0,0 +1,386 @@
+/*
+ * Broadcom STB AVS TMON thermal sensor driver
+ *
+ * Copyright (c) 2015-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define DRV_NAME "brcmstb_thermal"
+
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/thermal.h>
+
+#define AVS_TMON_STATUS 0x00
+ #define AVS_TMON_STATUS_valid_msk BIT(11)
+ #define AVS_TMON_STATUS_data_msk GENMASK(10, 1)
+ #define AVS_TMON_STATUS_data_shift 1
+
+#define AVS_TMON_EN_OVERTEMP_RESET 0x04
+ #define AVS_TMON_EN_OVERTEMP_RESET_msk BIT(0)
+
+#define AVS_TMON_RESET_THRESH 0x08
+ #define AVS_TMON_RESET_THRESH_msk GENMASK(10, 1)
+ #define AVS_TMON_RESET_THRESH_shift 1
+
+#define AVS_TMON_INT_IDLE_TIME 0x10
+
+#define AVS_TMON_EN_TEMP_INT_SRCS 0x14
+ #define AVS_TMON_EN_TEMP_INT_SRCS_high BIT(1)
+ #define AVS_TMON_EN_TEMP_INT_SRCS_low BIT(0)
+
+#define AVS_TMON_INT_THRESH 0x18
+ #define AVS_TMON_INT_THRESH_high_msk GENMASK(26, 17)
+ #define AVS_TMON_INT_THRESH_high_shift 17
+ #define AVS_TMON_INT_THRESH_low_msk GENMASK(10, 1)
+ #define AVS_TMON_INT_THRESH_low_shift 1
+
+#define AVS_TMON_TEMP_INT_CODE 0x1c
+#define AVS_TMON_TP_TEST_ENABLE 0x20
+
+/* Default coefficients */
+#define AVS_TMON_TEMP_SLOPE -487
+#define AVS_TMON_TEMP_OFFSET 410040
+
+/* HW related temperature constants */
+#define AVS_TMON_TEMP_MAX 0x3ff
+#define AVS_TMON_TEMP_MIN -88161
+#define AVS_TMON_TEMP_MASK AVS_TMON_TEMP_MAX
+
+enum avs_tmon_trip_type {
+ TMON_TRIP_TYPE_LOW = 0,
+ TMON_TRIP_TYPE_HIGH,
+ TMON_TRIP_TYPE_RESET,
+ TMON_TRIP_TYPE_MAX,
+};
+
+struct avs_tmon_trip {
+ /* HW bit to enable the trip */
+ u32 enable_offs;
+ u32 enable_mask;
+
+ /* HW field to read the trip temperature */
+ u32 reg_offs;
+ u32 reg_msk;
+ int reg_shift;
+};
+
+static struct avs_tmon_trip avs_tmon_trips[] = {
+ /* Trips when temperature is below threshold */
+ [TMON_TRIP_TYPE_LOW] = {
+ .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS,
+ .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_low,
+ .reg_offs = AVS_TMON_INT_THRESH,
+ .reg_msk = AVS_TMON_INT_THRESH_low_msk,
+ .reg_shift = AVS_TMON_INT_THRESH_low_shift,
+ },
+ /* Trips when temperature is above threshold */
+ [TMON_TRIP_TYPE_HIGH] = {
+ .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS,
+ .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_high,
+ .reg_offs = AVS_TMON_INT_THRESH,
+ .reg_msk = AVS_TMON_INT_THRESH_high_msk,
+ .reg_shift = AVS_TMON_INT_THRESH_high_shift,
+ },
+ /* Automatically resets chip when above threshold */
+ [TMON_TRIP_TYPE_RESET] = {
+ .enable_offs = AVS_TMON_EN_OVERTEMP_RESET,
+ .enable_mask = AVS_TMON_EN_OVERTEMP_RESET_msk,
+ .reg_offs = AVS_TMON_RESET_THRESH,
+ .reg_msk = AVS_TMON_RESET_THRESH_msk,
+ .reg_shift = AVS_TMON_RESET_THRESH_shift,
+ },
+};
+
+struct brcmstb_thermal_priv {
+ void __iomem *tmon_base;
+ struct device *dev;
+ struct thermal_zone_device *thermal;
+};
+
+static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope,
+ int *offset)
+{
+ *slope = thermal_zone_get_slope(tz);
+ *offset = thermal_zone_get_offset(tz);
+}
+
+/* Convert a HW code to a temperature reading (millidegree celsius) */
+static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
+ u32 code)
+{
+ const int val = code & AVS_TMON_TEMP_MASK;
+ int slope, offset;
+
+ avs_tmon_get_coeffs(tz, &slope, &offset);
+
+ return slope * val + offset;
+}
+
+/*
+ * Convert a temperature value (millidegree celsius) to a HW code
+ *
+ * @temp: temperature to convert
+ * @low: if true, round toward the low side
+ */
+static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz,
+ int temp, bool low)
+{
+ int slope, offset;
+
+ if (temp < AVS_TMON_TEMP_MIN)
+ return AVS_TMON_TEMP_MAX; /* Maximum code value */
+
+ avs_tmon_get_coeffs(tz, &slope, &offset);
+
+ if (temp >= offset)
+ return 0; /* Minimum code value */
+
+ if (low)
+ return (u32)(DIV_ROUND_UP(offset - temp, abs(slope)));
+ else
+ return (u32)((offset - temp) / abs(slope));
+}
+
+static int brcmstb_get_temp(void *data, int *temp)
+{
+ struct brcmstb_thermal_priv *priv = data;
+ u32 val;
+ long t;
+
+ val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
+
+ if (!(val & AVS_TMON_STATUS_valid_msk)) {
+ dev_err(priv->dev, "reading not valid\n");
+ return -EIO;
+ }
+
+ val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
+
+ t = avs_tmon_code_to_temp(priv->thermal, val);
+ if (t < 0)
+ *temp = 0;
+ else
+ *temp = t;
+
+ return 0;
+}
+
+static void avs_tmon_trip_enable(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type, int en)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val = __raw_readl(priv->tmon_base + trip->enable_offs);
+
+ dev_dbg(priv->dev, "%sable trip, type %d\n", en ? "en" : "dis", type);
+
+ if (en)
+ val |= trip->enable_mask;
+ else
+ val &= ~trip->enable_mask;
+
+ __raw_writel(val, priv->tmon_base + trip->enable_offs);
+}
+
+static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val = __raw_readl(priv->tmon_base + trip->reg_offs);
+
+ val &= trip->reg_msk;
+ val >>= trip->reg_shift;
+
+ return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
+ enum avs_tmon_trip_type type,
+ int temp)
+{
+ struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+ u32 val, orig;
+
+ dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
+
+ /* round toward low temp for the low interrupt */
+ val = avs_tmon_temp_to_code(priv->thermal, temp,
+ type == TMON_TRIP_TYPE_LOW);
+
+ val <<= trip->reg_shift;
+ val &= trip->reg_msk;
+
+ orig = __raw_readl(priv->tmon_base + trip->reg_offs);
+ orig &= ~trip->reg_msk;
+ orig |= val;
+ __raw_writel(orig, priv->tmon_base + trip->reg_offs);
+}
+
+static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
+{
+ u32 val;
+
+ val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
+ return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
+{
+ struct brcmstb_thermal_priv *priv = data;
+ int low, high, intr;
+
+ low = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_LOW);
+ high = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_HIGH);
+ intr = avs_tmon_get_intr_temp(priv);
+
+ dev_dbg(priv->dev, "low/intr/high: %d/%d/%d\n",
+ low, intr, high);
+
+ /* Disable high-temp until next threshold shift */
+ if (intr >= high)
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+ /* Disable low-temp until next threshold shift */
+ if (intr <= low)
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+
+ /*
+ * Notify using the interrupt temperature, in case the temperature
+ * changes before it can next be read out
+ */
+ thermal_zone_device_update(priv->thermal, intr);
+
+ return IRQ_HANDLED;
+}
+
+static int brcmstb_set_trips(void *data, int low, int high)
+{
+ struct brcmstb_thermal_priv *priv = data;
+
+ dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
+
+ if (low) {
+ if (low > INT_MAX)
+ low = INT_MAX;
+ avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
+ } else {
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+ }
+
+ if (high < ULONG_MAX) {
+ if (high > INT_MAX)
+ high = INT_MAX;
+ avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
+ } else {
+ avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+ }
+
+ return 0;
+}
+
+static struct thermal_zone_of_device_ops of_ops = {
+ .get_temp = brcmstb_get_temp,
+ .set_trips = brcmstb_set_trips,
+};
+
+static const struct of_device_id brcmstb_thermal_id_table[] = {
+ { .compatible = "brcm,avs-tmon" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
+
+static int brcmstb_thermal_probe(struct platform_device *pdev)
+{
+ struct thermal_zone_device *thermal;
+ struct brcmstb_thermal_priv *priv;
+ struct resource *res;
+ int irq, ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->tmon_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->tmon_base))
+ return PTR_ERR(priv->tmon_base);
+
+ priv->dev = &pdev->dev;
+ platform_set_drvdata(pdev, priv);
+
+ thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops);
+ if (IS_ERR(thermal)) {
+ ret = PTR_ERR(thermal);
+ dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
+ return ret;
+ }
+
+ priv->thermal = thermal;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "could not get IRQ\n");
+ ret = irq;
+ goto err;
+ }
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ brcmstb_tmon_irq_thread, IRQF_ONESHOT,
+ DRV_NAME, priv);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not request IRQ: %d\n", ret);
+ goto err;
+ }
+
+ dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n");
+
+ return 0;
+
+err:
+ thermal_zone_of_sensor_unregister(&pdev->dev, thermal);
+ return ret;
+}
+
+static int brcmstb_thermal_exit(struct platform_device *pdev)
+{
+ struct brcmstb_thermal_priv *priv = platform_get_drvdata(pdev);
+ struct thermal_zone_device *thermal = priv->thermal;
+
+ if (thermal)
+ thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal);
+
+ return 0;
+}
+
+static struct platform_driver brcmstb_thermal_driver = {
+ .probe = brcmstb_thermal_probe,
+ .remove = brcmstb_thermal_exit,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = brcmstb_thermal_id_table,
+ },
+};
+module_platform_driver(brcmstb_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("Broadcom STB AVS TMON thermal driver");
--
2.7.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
end of thread, other threads:[~2017-08-09 21:57 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-07-31 19:26 [PATCH v3 0/4] thermal: add brcmstb AVS TMON driver Markus Mayer
2017-07-31 19:26 ` Markus Mayer
2017-07-31 19:26 ` Markus Mayer
2017-07-31 19:26 ` [PATCH v3 1/4] Documentation: devicetree: add binding for Broadcom STB AVS TMON Markus Mayer
2017-07-31 19:26 ` Markus Mayer
2017-08-08 12:36 ` Zhang Rui
2017-08-08 12:36 ` Zhang Rui
2017-08-09 21:39 ` Markus Mayer
2017-08-09 21:39 ` Markus Mayer
2017-08-09 21:39 ` Markus Mayer
2017-07-31 19:26 ` [PATCH v3 2/4] thermal: add brcmstb AVS TMON driver Markus Mayer
2017-07-31 19:26 ` Markus Mayer
2017-07-31 19:26 ` [PATCH v3 3/4] ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL Markus Mayer
2017-07-31 19:26 ` Markus Mayer
2017-07-31 19:26 ` [PATCH v3 4/4] arm64: defconfig: " Markus Mayer
2017-07-31 19:26 ` Markus Mayer
2017-08-07 17:52 ` [PATCH v3 0/4] thermal: add brcmstb AVS TMON driver Florian Fainelli
2017-08-07 17:52 ` Florian Fainelli
2017-08-08 12:26 ` Zhang Rui
2017-08-08 12:26 ` Zhang Rui
2017-08-09 21:56 Markus Mayer
2017-08-09 21:56 ` [PATCH v3 2/4] " Markus Mayer
2017-08-09 21:56 ` Markus Mayer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.