All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jon Mason <jdmason@kudzu.us>
To: Logan Gunthorpe <logang@deltatee.com>
Cc: linux-ntb@googlegroups.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org, Dave Jiang <dave.jiang@intel.com>,
	Allen Hubbe <Allen.Hubbe@emc.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kurt Schwemmer <kurt.schwemmer@microsemi.com>,
	Stephen Bates <sbates@raithlin.com>,
	Serge Semin <fancer.lancer@gmail.com>
Subject: Re: [PATCH v3 14/16] switchtec_ntb: implement scratchpad registers
Date: Tue, 1 Aug 2017 15:10:51 -0400	[thread overview]
Message-ID: <20170801191050.GJ4186@kudzu.us> (raw)
In-Reply-To: <20170725205753.4735-15-logang@deltatee.com>

On Tue, Jul 25, 2017 at 02:57:51PM -0600, Logan Gunthorpe wrote:
> Seeing there is no dedicated hardware for this, we simply add
> these as entries in the shared memory window. Thus, we could support
> any number of them but 128 seems like enough, for now.

It would probaly be better if I remarked about the SPADs in the actual
patch about the SPADS :)

The whole point of using the SPADs in the NTB driver was to workaround
the problems establishing a connection between the two sides of the
NTB and where everything lives.  So, using a MW to get around the
SPADs is sort of backwards (and slightly funny).  I realize you are
trying to use the existing transport with minimal changes to enable
your hardware, and thus this makes logical sense to you.  However, if
the SPADs are not really needed, then we should either remove them
from the transport (or use them for something else).

Per my comment in the other patch, I'm amenable to take this series
as-is, assuming you are willing to address this design issue in the
near future.  Thoughts?

Thanks,
Jon

> 
> Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
> Reviewed-by: Stephen Bates <sbates@raithlin.com>
> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
> ---
>  drivers/ntb/hw/mscc/switchtec_ntb.c | 75 ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 73 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/ntb/hw/mscc/switchtec_ntb.c b/drivers/ntb/hw/mscc/switchtec_ntb.c
> index 3037ca730998..ca403ad2f7ac 100644
> --- a/drivers/ntb/hw/mscc/switchtec_ntb.c
> +++ b/drivers/ntb/hw/mscc/switchtec_ntb.c
> @@ -67,6 +67,7 @@ struct shared_mw {
>  	u32 link_sta;
>  	u32 partition_id;
>  	u64 mw_sizes[MAX_MWS];
> +	u32 spad[128];
>  };
>  
>  #define MAX_DIRECT_MW ARRAY_SIZE(((struct ntb_ctrl_regs *)(0))->bar_entry)
> @@ -455,22 +456,90 @@ static int switchtec_ntb_peer_db_set(struct ntb_dev *ntb, u64 db_bits)
>  
>  static int switchtec_ntb_spad_count(struct ntb_dev *ntb)
>  {
> -	return 0;
> +	struct switchtec_ntb *sndev = ntb_sndev(ntb);
> +
> +	return ARRAY_SIZE(sndev->self_shared->spad);
>  }
>  
>  static u32 switchtec_ntb_spad_read(struct ntb_dev *ntb, int idx)
>  {
> -	return 0;
> +	struct switchtec_ntb *sndev = ntb_sndev(ntb);
> +
> +	if (idx < 0 || idx >= ARRAY_SIZE(sndev->self_shared->spad))
> +		return 0;
> +
> +	if (!sndev->self_shared)
> +		return 0;
> +
> +	return sndev->self_shared->spad[idx];
>  }
>  
>  static int switchtec_ntb_spad_write(struct ntb_dev *ntb, int idx, u32 val)
>  {
> +	struct switchtec_ntb *sndev = ntb_sndev(ntb);
> +
> +	if (idx < 0 || idx >= ARRAY_SIZE(sndev->self_shared->spad))
> +		return -EINVAL;
> +
> +	if (!sndev->self_shared)
> +		return -EIO;
> +
> +	sndev->self_shared->spad[idx] = val;
> +
>  	return 0;
>  }
>  
> +static u32 switchtec_ntb_peer_spad_read(struct ntb_dev *ntb, int pidx,
> +					int sidx)
> +{
> +	struct switchtec_ntb *sndev = ntb_sndev(ntb);
> +
> +	if (pidx != NTB_DEF_PEER_IDX)
> +		return -EINVAL;
> +
> +	if (sidx < 0 || sidx >= ARRAY_SIZE(sndev->peer_shared->spad))
> +		return 0;
> +
> +	if (!sndev->peer_shared)
> +		return 0;
> +
> +	return ioread32(&sndev->peer_shared->spad[sidx]);
> +}
> +
>  static int switchtec_ntb_peer_spad_write(struct ntb_dev *ntb, int pidx,
>  					 int sidx, u32 val)
>  {
> +	struct switchtec_ntb *sndev = ntb_sndev(ntb);
> +
> +	if (pidx != NTB_DEF_PEER_IDX)
> +		return -EINVAL;
> +
> +	if (sidx < 0 || sidx >= ARRAY_SIZE(sndev->peer_shared->spad))
> +		return -EINVAL;
> +
> +	if (!sndev->peer_shared)
> +		return -EIO;
> +
> +	iowrite32(val, &sndev->peer_shared->spad[sidx]);
> +
> +	return 0;
> +}
> +
> +static int switchtec_ntb_peer_spad_addr(struct ntb_dev *ntb, int pidx,
> +					int sidx, phys_addr_t *spad_addr)
> +{
> +	struct switchtec_ntb *sndev = ntb_sndev(ntb);
> +	unsigned long offset;
> +
> +	if (pidx != NTB_DEF_PEER_IDX)
> +		return -EINVAL;
> +
> +	offset = (unsigned long)&sndev->peer_shared->spad[sidx] -
> +		(unsigned long)sndev->stdev->mmio;
> +
> +	if (spad_addr)
> +		*spad_addr = pci_resource_start(ntb->pdev, 0) + offset;
> +
>  	return 0;
>  }
>  
> @@ -496,7 +565,9 @@ static const struct ntb_dev_ops switchtec_ntb_ops = {
>  	.spad_count		= switchtec_ntb_spad_count,
>  	.spad_read		= switchtec_ntb_spad_read,
>  	.spad_write		= switchtec_ntb_spad_write,
> +	.peer_spad_read		= switchtec_ntb_peer_spad_read,
>  	.peer_spad_write	= switchtec_ntb_peer_spad_write,
> +	.peer_spad_addr		= switchtec_ntb_peer_spad_addr,
>  };
>  
>  static void switchtec_ntb_init_sndev(struct switchtec_ntb *sndev)
> -- 
> 2.11.0
> 

  reply	other threads:[~2017-08-01 19:10 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-25 20:57 [PATCH v3 00/16] Switchtec NTB Support Logan Gunthorpe
2017-07-25 20:57 ` [PATCH v3 01/16] switchtec: move structure definitions into a common header Logan Gunthorpe
2017-07-31 20:15   ` Bjorn Helgaas
2017-07-31 20:51     ` Logan Gunthorpe
2017-07-31 22:50       ` Bjorn Helgaas
2017-07-25 20:57 ` [PATCH v3 02/16] switchtec: export class symbol for use in upper layer driver Logan Gunthorpe
2017-07-25 20:57 ` [PATCH v3 03/16] switchtec: add NTB hardware register definitions Logan Gunthorpe
2017-07-25 20:57 ` [PATCH v3 04/16] switchtec: add link event notifier callback Logan Gunthorpe
2017-07-25 20:57 ` [PATCH v3 05/16] ntb: ntb_test: ensure the link is up before trying to configure the mws Logan Gunthorpe
2017-08-01 18:07   ` Jon Mason
2017-08-01 18:09     ` Logan Gunthorpe
2017-08-01 18:16       ` Jon Mason
2017-08-01 18:19         ` Logan Gunthorpe
2017-07-25 20:57 ` [PATCH v3 06/16] ntb: ensure ntb_mw_get_align() is only called when the link is up Logan Gunthorpe
2017-07-31 20:16   ` Bjorn Helgaas
2017-08-01 18:14   ` Jon Mason
2017-08-01 18:17     ` Logan Gunthorpe
2017-08-01 18:28       ` Jon Mason
2017-07-25 20:57 ` [PATCH v3 07/16] ntb: add check and comment for link up to mw_count() and mw_get_align() Logan Gunthorpe
2017-08-01 18:11   ` Jon Mason
2017-07-25 20:57 ` [PATCH v3 08/16] switchtec_ntb: introduce initial NTB driver Logan Gunthorpe
2017-07-31 23:08   ` Dave Jiang
2017-07-25 20:57 ` [PATCH v3 09/16] switchtec_ntb: initialize hardware for memory windows Logan Gunthorpe
2017-07-31 20:25   ` Bjorn Helgaas
2017-08-01 18:55   ` Jon Mason
2017-07-25 20:57 ` [PATCH v3 10/16] switchtec_ntb: initialize hardware for doorbells and messages Logan Gunthorpe
2017-07-31 20:26   ` Bjorn Helgaas
2017-07-25 20:57 ` [PATCH v3 11/16] switchtec_ntb: add skeleton NTB driver Logan Gunthorpe
2017-07-25 20:57 ` [PATCH v3 12/16] switchtec_ntb: add link management Logan Gunthorpe
2017-07-31 20:27   ` Bjorn Helgaas
2017-07-25 20:57 ` [PATCH v3 13/16] switchtec_ntb: implement doorbell registers Logan Gunthorpe
2017-08-01 18:59   ` Jon Mason
2017-07-25 20:57 ` [PATCH v3 14/16] switchtec_ntb: implement scratchpad registers Logan Gunthorpe
2017-08-01 19:10   ` Jon Mason [this message]
2017-08-01 22:26     ` Logan Gunthorpe
2017-08-02 13:06       ` Allen Hubbe
2017-08-02 13:06         ` Allen Hubbe
2017-08-02 16:32         ` Jon Mason
2017-08-02 17:02           ` Logan Gunthorpe
2017-07-25 20:57 ` [PATCH v3 15/16] switchtec_ntb: add memory window support Logan Gunthorpe
2017-07-25 20:57 ` [PATCH v3 16/16] switchtec_ntb: update switchtec documentation with notes for NTB Logan Gunthorpe
2017-07-26 13:09 ` [PATCH v3 00/16] Switchtec NTB Support Allen Hubbe
2017-07-26 13:09   ` Allen Hubbe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170801191050.GJ4186@kudzu.us \
    --to=jdmason@kudzu.us \
    --cc=Allen.Hubbe@emc.com \
    --cc=bhelgaas@google.com \
    --cc=dave.jiang@intel.com \
    --cc=fancer.lancer@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kurt.schwemmer@microsemi.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-ntb@googlegroups.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=logang@deltatee.com \
    --cc=sbates@raithlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.