From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Helgaas Subject: Re: [PATCH v6 2/7] dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 Date: Thu, 3 Aug 2017 18:05:11 -0500 Message-ID: <20170803230511.GR20308@bhelgaas-glaptop.roam.corp.google.com> References: <1501482857-14100-1-git-send-email-varada@codeaurora.org> <1501482857-14100-3-git-send-email-varada@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1501482857-14100-3-git-send-email-varada@codeaurora.org> Sender: linux-pci-owner@vger.kernel.org To: Varadarajan Narayanan Cc: bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com, svarbanov@mm-sol.com, kishon@ti.com, sboyd@codeaurora.org, vivek.gautam@codeaurora.org, fengguang.wu@intel.com, weiyongjun1@huawei.com, linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org On Mon, Jul 31, 2017 at 12:04:12PM +0530, Varadarajan Narayanan wrote: > IPQ8074 uses QMP phy controller that provides support to PCIe and > USB. Adding dt binding information for the same. s/ph/PHY/ s/dt/DT/ (as in previous changelog) > > Reviewed-by: Vivek Gautam > Signed-off-by: Varadarajan Narayanan > --- > Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > index 5d7a51f..802af1b 100644 > --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > @@ -6,6 +6,7 @@ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. > > Required properties: > - compatible: compatible list, contains: > + "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 > "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, > "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996. > > @@ -38,6 +39,8 @@ Required properties: > "phy", "common", "cfg". > For "qcom,msm8996-qmp-usb3-phy" must contain > "phy", "common". > + For "qcom,ipq8074-qmp-pcie-phy" must contain: > + "phy", "common". > > - vdda-phy-supply: Phandle to a regulator supply to PHY core block. > - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. > @@ -63,6 +66,11 @@ Required properties for child node: > - clock-output-names: Name of the phy clock that will be the parent for > the above pipe clock. > > + For "qcom,ipq8074-qmp-pcie-phy": > + - "pcie20_phy0_pipe_clk" Pipe Clock parent > + (or) > + "pcie20_phy1_pipe_clk" > + > - resets: a list of phandles and reset controller specifier pairs, > one for each entry in reset-names. > - reset-names: Must contain following for pcie qmp phys: > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation >