From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lorenzo Bianconi Subject: [PATCH v2 3/5] iio: st_sensors: add register mask for status register Date: Thu, 17 Aug 2017 19:37:27 +0200 Message-ID: <20170817173729.10899-4-lorenzo.bianconi@st.com> References: <20170817173729.10899-1-lorenzo.bianconi@st.com> Return-path: In-Reply-To: <20170817173729.10899-1-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, lorenzo.bianconi-qxv4g6HH51o@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Introduce register mask for data-ready status register since pressure sensors (e.g. LPS22HB) export just two channels (BIT(0) and BIT(1)) and BIT(2) is marked reserved while in st_sensors_new_samples_available() value read from status register is masked using 0x7. Moreover do not mask status register using active_scan_mask since now status value is properly masked and if the result is not zero the interrupt has to be consumed by the driver. This fix an issue on LPS25H and LPS331AP where channel definition is swapped respect to status register. Furthermore that change allows to properly support new devices (e.g LIS2DW12) that report just ZYXDA (data-ready) field in status register to figure out if the interrupt has been generated by the device. Fixes: 97865fe41322 (iio: st_sensors: verify interrupt event to status) Signed-off-by: Lorenzo Bianconi --- drivers/iio/accel/st_accel_core.c | 35 +++++++++++++++++----- drivers/iio/common/st_sensors/st_sensors_trigger.c | 16 +++------- drivers/iio/gyro/st_gyro_core.c | 15 ++++++++-- drivers/iio/magnetometer/st_magn_core.c | 5 +++- drivers/iio/pressure/st_pressure_core.c | 15 ++++++++-- include/linux/iio/common/st_sensors.h | 7 +++-- 6 files changed, 65 insertions(+), 28 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 9fac5a41bacd..4d9190625630 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -165,7 +165,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { }, .addr_ihl = 0x25, .mask_ihl = 0x02, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x23, @@ -242,7 +245,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x23, @@ -325,7 +331,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { }, .addr_ihl = 0x23, .mask_ihl = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, .ig1 = { .en_addr = 0x23, .en_mask = 0x08, @@ -398,7 +407,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = 0x21, .mask = 0x04, }, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x21, @@ -465,7 +477,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x21, @@ -590,7 +605,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = 0x21, .mask = 0x04, }, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x21, @@ -662,7 +680,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { }, .addr_ihl = 0x25, .mask_ihl = 0x02, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x23, diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index fa73e6795359..fdcc5a891958 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -31,7 +31,7 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev, int ret; /* How would I know if I can't check it? */ - if (!sdata->sensor_settings->drdy_irq.addr_stat_drdy) + if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) return -EINVAL; /* No scan mask, no interrupt */ @@ -39,23 +39,15 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev, return 0; ret = sdata->tf->read_byte(&sdata->tb, sdata->dev, - sdata->sensor_settings->drdy_irq.addr_stat_drdy, + sdata->sensor_settings->drdy_irq.stat_drdy.addr, &status); if (ret < 0) { dev_err(sdata->dev, "error checking samples available\n"); return ret; } - /* - * the lower bits of .active_scan_mask[0] is directly mapped - * to the channels on the sensor: either bit 0 for - * one-dimensional sensors, or e.g. x,y,z for accelerometers, - * gyroscopes or magnetometers. No sensor use more than 3 - * channels, so cut the other status bits here. - */ - status &= 0x07; - if (status & (u8)indio_dev->active_scan_mask[0]) + if (status & sdata->sensor_settings->drdy_irq.stat_drdy.mask) return 1; return 0; @@ -212,7 +204,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, * it was "our" interrupt. */ if (sdata->int_pin_open_drain && - sdata->sensor_settings->drdy_irq.addr_stat_drdy) + sdata->sensor_settings->drdy_irq.stat_drdy.addr) irq_trig |= IRQF_SHARED; err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 764306378b20..4ebf1dafc13f 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -120,7 +120,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, @@ -192,7 +195,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, @@ -259,7 +265,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 2c465cbe3b0a..6d404d2e71be 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -359,7 +359,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { .addr = 0x62, .mask = 0x01, }, - .addr_stat_drdy = 0x67, + .stat_drdy = { + .addr = 0x67, + .mask = 0x07, + }, }, .multi_read_bit = false, .bootime = 2, diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 240fa9f3ee3b..db2ac4d094fc 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -292,7 +292,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, }, .multi_read_bit = true, .bootime = 2, @@ -398,7 +401,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, }, .multi_read_bit = true, .bootime = 2, @@ -458,7 +464,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x12, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, }, .multi_read_bit = true, .bootime = 2, diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index ac3aa89518ca..e6c646d5d6d4 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -138,7 +138,7 @@ struct st_sensor_das { * @mask_ihl: mask to enable/disable active low on the INT lines. * @addr_od: address to enable/disable Open Drain on the INT lines. * @mask_od: mask to enable/disable Open Drain on the INT lines. - * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt + * struct stat_drdy - status register of DRDY (data ready) interrupt. * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. @@ -156,7 +156,10 @@ struct st_sensor_data_ready_irq { u8 mask_ihl; u8 addr_od; u8 mask_od; - u8 addr_stat_drdy; + struct { + u8 addr; + u8 mask; + } stat_drdy; struct { u8 en_addr; u8 en_mask; -- 2.14.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Lorenzo Bianconi To: jic23@kernel.org Cc: linux-iio@vger.kernel.org, linus.walleij@linaro.org, lorenzo.bianconi@st.com, devicetree@vger.kernel.org Subject: [PATCH v2 3/5] iio: st_sensors: add register mask for status register Date: Thu, 17 Aug 2017 19:37:27 +0200 Message-Id: <20170817173729.10899-4-lorenzo.bianconi@st.com> In-Reply-To: <20170817173729.10899-1-lorenzo.bianconi@st.com> References: <20170817173729.10899-1-lorenzo.bianconi@st.com> List-ID: Introduce register mask for data-ready status register since pressure sensors (e.g. LPS22HB) export just two channels (BIT(0) and BIT(1)) and BIT(2) is marked reserved while in st_sensors_new_samples_available() value read from status register is masked using 0x7. Moreover do not mask status register using active_scan_mask since now status value is properly masked and if the result is not zero the interrupt has to be consumed by the driver. This fix an issue on LPS25H and LPS331AP where channel definition is swapped respect to status register. Furthermore that change allows to properly support new devices (e.g LIS2DW12) that report just ZYXDA (data-ready) field in status register to figure out if the interrupt has been generated by the device. Fixes: 97865fe41322 (iio: st_sensors: verify interrupt event to status) Signed-off-by: Lorenzo Bianconi --- drivers/iio/accel/st_accel_core.c | 35 +++++++++++++++++----- drivers/iio/common/st_sensors/st_sensors_trigger.c | 16 +++------- drivers/iio/gyro/st_gyro_core.c | 15 ++++++++-- drivers/iio/magnetometer/st_magn_core.c | 5 +++- drivers/iio/pressure/st_pressure_core.c | 15 ++++++++-- include/linux/iio/common/st_sensors.h | 7 +++-- 6 files changed, 65 insertions(+), 28 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 9fac5a41bacd..4d9190625630 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -165,7 +165,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { }, .addr_ihl = 0x25, .mask_ihl = 0x02, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x23, @@ -242,7 +245,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x23, @@ -325,7 +331,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { }, .addr_ihl = 0x23, .mask_ihl = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, .ig1 = { .en_addr = 0x23, .en_mask = 0x08, @@ -398,7 +407,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = 0x21, .mask = 0x04, }, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x21, @@ -465,7 +477,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x21, @@ -590,7 +605,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = 0x21, .mask = 0x04, }, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x21, @@ -662,7 +680,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { }, .addr_ihl = 0x25, .mask_ihl = 0x02, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .sim = { .addr = 0x23, diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index fa73e6795359..fdcc5a891958 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -31,7 +31,7 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev, int ret; /* How would I know if I can't check it? */ - if (!sdata->sensor_settings->drdy_irq.addr_stat_drdy) + if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) return -EINVAL; /* No scan mask, no interrupt */ @@ -39,23 +39,15 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev, return 0; ret = sdata->tf->read_byte(&sdata->tb, sdata->dev, - sdata->sensor_settings->drdy_irq.addr_stat_drdy, + sdata->sensor_settings->drdy_irq.stat_drdy.addr, &status); if (ret < 0) { dev_err(sdata->dev, "error checking samples available\n"); return ret; } - /* - * the lower bits of .active_scan_mask[0] is directly mapped - * to the channels on the sensor: either bit 0 for - * one-dimensional sensors, or e.g. x,y,z for accelerometers, - * gyroscopes or magnetometers. No sensor use more than 3 - * channels, so cut the other status bits here. - */ - status &= 0x07; - if (status & (u8)indio_dev->active_scan_mask[0]) + if (status & sdata->sensor_settings->drdy_irq.stat_drdy.mask) return 1; return 0; @@ -212,7 +204,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, * it was "our" interrupt. */ if (sdata->int_pin_open_drain && - sdata->sensor_settings->drdy_irq.addr_stat_drdy) + sdata->sensor_settings->drdy_irq.stat_drdy.addr) irq_trig |= IRQF_SHARED; err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 764306378b20..4ebf1dafc13f 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -120,7 +120,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, @@ -192,7 +195,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, @@ -259,7 +265,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x07, + }, }, .multi_read_bit = true, .bootime = 2, diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 2c465cbe3b0a..6d404d2e71be 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -359,7 +359,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { .addr = 0x62, .mask = 0x01, }, - .addr_stat_drdy = 0x67, + .stat_drdy = { + .addr = 0x67, + .mask = 0x07, + }, }, .multi_read_bit = false, .bootime = 2, diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 240fa9f3ee3b..db2ac4d094fc 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -292,7 +292,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, }, .multi_read_bit = true, .bootime = 2, @@ -398,7 +401,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x22, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, }, .multi_read_bit = true, .bootime = 2, @@ -458,7 +464,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_ihl = 0x80, .addr_od = 0x12, .mask_od = 0x40, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, }, .multi_read_bit = true, .bootime = 2, diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index ac3aa89518ca..e6c646d5d6d4 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -138,7 +138,7 @@ struct st_sensor_das { * @mask_ihl: mask to enable/disable active low on the INT lines. * @addr_od: address to enable/disable Open Drain on the INT lines. * @mask_od: mask to enable/disable Open Drain on the INT lines. - * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt + * struct stat_drdy - status register of DRDY (data ready) interrupt. * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. @@ -156,7 +156,10 @@ struct st_sensor_data_ready_irq { u8 mask_ihl; u8 addr_od; u8 mask_od; - u8 addr_stat_drdy; + struct { + u8 addr; + u8 mask; + } stat_drdy; struct { u8 en_addr; u8 en_mask; -- 2.14.0