From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754403AbdHUQGp (ORCPT ); Mon, 21 Aug 2017 12:06:45 -0400 Received: from mail-wr0-f182.google.com ([209.85.128.182]:34658 "EHLO mail-wr0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753971AbdHUQGl (ORCPT ); Mon, 21 Aug 2017 12:06:41 -0400 From: Jerome Brunet To: Kevin Hilman , Carlo Caione Cc: Jerome Brunet , linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 0/9] ARM64: dts: meson: update around mmc Date: Mon, 21 Aug 2017 18:06:28 +0200 Message-Id: <20170821160637.22456-1-jbrunet@baylibre.com> X-Mailer: git-send-email 2.9.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patchset feature updates around mmc. It is linked to this series [0] but does not strictly depends on it. It adds: * The regulator settling times for the gpio regulator of nanopi-k2 and the libretech-cc. * UHS modes for the p20x and nanopi-k2. * clk-gate pins: these are the pinmuxes used for the clk-stop work around explained here [1] It also removes cap-sd-highspeed from eMMC nodes. Special note on SDR104: While the PCB of the p200 and the libretech-cc does not seems to handle SDR104 completely, the nanopi-k2 seems to be handling it correctly. The patch enabling this mode on the nanopi-k2 is the last one of this series. It should propabably be left out until more people can test sdr104 on the nanopi-k2 This series has been tested on the gxbb-200, the gxbb-nanopi-k2 and the gxl-s905x-libretech-cc Changes since v1 [2]: * Reorder patches to put fixes first, then enhancements * Fix error in the SDIO clk_gate pins (GPIOX_5 instead GPIOX_4) [0]: https://lkml.kernel.org/r/20170821160301.21899-1-jbrunet@baylibre.com [1]: https://lkml.kernel.org/r/20170821160301.21899-11-jbrunet@baylibre.com [2]: https://lkml.kernel.org/r/20170804180816.18737-1-jbrunet@baylibre.com Jerome Brunet (9): ARM64: dts: meson-gx: Use correct mmc clock source 0 ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes ARM64: dts: meson: add mmc clk gate pins ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times ARM64: dts: meson-gxl: libretech-cc: remove sdr104 capability ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 10 +++--- .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 19 ++++++++--- .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 12 ++++--- .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 ++--- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 13 +++++--- .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 10 +++--- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 39 ++++++++++++++++++++-- .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 7 ++-- .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 10 ++++-- .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 10 +++--- .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 10 +++--- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 39 ++++++++++++++++++++-- .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 7 ++-- arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 1 - 14 files changed, 146 insertions(+), 50 deletions(-) -- 2.9.5 From mboxrd@z Thu Jan 1 00:00:00 1970 From: jbrunet@baylibre.com (Jerome Brunet) Date: Mon, 21 Aug 2017 18:06:28 +0200 Subject: [PATCH v2 0/9] ARM64: dts: meson: update around mmc Message-ID: <20170821160637.22456-1-jbrunet@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patchset feature updates around mmc. It is linked to this series [0] but does not strictly depends on it. It adds: * The regulator settling times for the gpio regulator of nanopi-k2 and the libretech-cc. * UHS modes for the p20x and nanopi-k2. * clk-gate pins: these are the pinmuxes used for the clk-stop work around explained here [1] It also removes cap-sd-highspeed from eMMC nodes. Special note on SDR104: While the PCB of the p200 and the libretech-cc does not seems to handle SDR104 completely, the nanopi-k2 seems to be handling it correctly. The patch enabling this mode on the nanopi-k2 is the last one of this series. It should propabably be left out until more people can test sdr104 on the nanopi-k2 This series has been tested on the gxbb-200, the gxbb-nanopi-k2 and the gxl-s905x-libretech-cc Changes since v1 [2]: * Reorder patches to put fixes first, then enhancements * Fix error in the SDIO clk_gate pins (GPIOX_5 instead GPIOX_4) [0]: https://lkml.kernel.org/r/20170821160301.21899-1-jbrunet at baylibre.com [1]: https://lkml.kernel.org/r/20170821160301.21899-11-jbrunet at baylibre.com [2]: https://lkml.kernel.org/r/20170804180816.18737-1-jbrunet at baylibre.com Jerome Brunet (9): ARM64: dts: meson-gx: Use correct mmc clock source 0 ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes ARM64: dts: meson: add mmc clk gate pins ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times ARM64: dts: meson-gxl: libretech-cc: remove sdr104 capability ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 10 +++--- .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 19 ++++++++--- .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 12 ++++--- .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 ++--- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 13 +++++--- .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 10 +++--- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 39 ++++++++++++++++++++-- .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 7 ++-- .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 10 ++++-- .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 10 +++--- .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 10 +++--- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 39 ++++++++++++++++++++-- .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 7 ++-- arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 1 - 14 files changed, 146 insertions(+), 50 deletions(-) -- 2.9.5 From mboxrd@z Thu Jan 1 00:00:00 1970 From: jbrunet@baylibre.com (Jerome Brunet) Date: Mon, 21 Aug 2017 18:06:28 +0200 Subject: [PATCH v2 0/9] ARM64: dts: meson: update around mmc Message-ID: <20170821160637.22456-1-jbrunet@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org This patchset feature updates around mmc. It is linked to this series [0] but does not strictly depends on it. It adds: * The regulator settling times for the gpio regulator of nanopi-k2 and the libretech-cc. * UHS modes for the p20x and nanopi-k2. * clk-gate pins: these are the pinmuxes used for the clk-stop work around explained here [1] It also removes cap-sd-highspeed from eMMC nodes. Special note on SDR104: While the PCB of the p200 and the libretech-cc does not seems to handle SDR104 completely, the nanopi-k2 seems to be handling it correctly. The patch enabling this mode on the nanopi-k2 is the last one of this series. It should propabably be left out until more people can test sdr104 on the nanopi-k2 This series has been tested on the gxbb-200, the gxbb-nanopi-k2 and the gxl-s905x-libretech-cc Changes since v1 [2]: * Reorder patches to put fixes first, then enhancements * Fix error in the SDIO clk_gate pins (GPIOX_5 instead GPIOX_4) [0]: https://lkml.kernel.org/r/20170821160301.21899-1-jbrunet at baylibre.com [1]: https://lkml.kernel.org/r/20170821160301.21899-11-jbrunet at baylibre.com [2]: https://lkml.kernel.org/r/20170804180816.18737-1-jbrunet at baylibre.com Jerome Brunet (9): ARM64: dts: meson-gx: Use correct mmc clock source 0 ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes ARM64: dts: meson: add mmc clk gate pins ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times ARM64: dts: meson-gxl: libretech-cc: remove sdr104 capability ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 10 +++--- .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 19 ++++++++--- .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 12 ++++--- .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 ++--- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 13 +++++--- .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 10 +++--- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 39 ++++++++++++++++++++-- .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 7 ++-- .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 10 ++++-- .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 10 +++--- .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 10 +++--- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 39 ++++++++++++++++++++-- .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 7 ++-- arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 1 - 14 files changed, 146 insertions(+), 50 deletions(-) -- 2.9.5