All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Bin Liu <b-liu@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Felipe Balbi <felipe.balbi@linux.intel.com>,
	Johan Hovold <johan@kernel.org>, stable <stable@vger.kernel.org>
Subject: [PATCH v2 2/2] USB: musb: fix late external abort on suspend
Date: Thu,  7 Sep 2017 15:37:48 +0200	[thread overview]
Message-ID: <20170907133748.7400-3-johan@kernel.org> (raw)
In-Reply-To: <20170907133748.7400-1-johan@kernel.org>

The musb delayed irq work was never flushed on suspend, something which
since 4.9 can lead to an external abort if the work is scheduled after
the grandparent's clock has been disabled:

PM: Suspending system (mem)
PM: suspend of devices complete after 125.224 msecs
PM: suspend devices took 0.132 seconds
PM: late suspend of devices complete after 7.423 msecs
PM: noirq suspend of devices complete after 7.083 msecs
suspend debug: Waiting for 5 second(s).
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd0262c60
...
[<c054880c>] (musb_default_readb) from [<c0547b5c>] (musb_irq_work+0x48/0x220)
[<c0547b5c>] (musb_irq_work) from [<c014f8a4>] (process_one_work+0x1f4/0x758)
[<c014f8a4>] (process_one_work) from [<c014fe5c>] (worker_thread+0x54/0x514)
[<c014fe5c>] (worker_thread) from [<c015704c>] (kthread+0x128/0x158)
[<c015704c>] (kthread) from [<c0109330>] (ret_from_fork+0x14/0x24)

Commit 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect") started
scheduling musb_irq_work with a delay of up to a second and with
retries thereby making this easy to trigger, for example, by suspending
shortly after a disconnect.

Note that we set a flag to prevent the irq work from rescheduling itself
during suspend and instead process a disconnect immediately. This takes
care of the case where we are disconnected shortly before suspending.

However, when in host mode, a disconnect while suspended will still
go unnoticed and thus prevent the controller from runtime suspending
upon resume as the session bit is always set. This will need to be
addressed separately.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core")
Fixes: 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect")
Cc: stable <stable@vger.kernel.org>     # 4.9
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/musb/musb_core.c | 11 +++++++++--
 drivers/usb/musb/musb_core.h |  2 ++
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 38fa3603554f..e083d0cce670 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1861,7 +1861,7 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 		MUSB_DEVCTL_HR;
 	switch (devctl & ~s) {
 	case MUSB_QUIRK_B_INVALID_VBUS_91:
-		if (musb->quirk_retries) {
+		if (musb->quirk_retries && !musb->flush_irq_work) {
 			musb_dbg(musb,
 				 "Poll devctl on invalid vbus, assume no session");
 			schedule_delayed_work(&musb->irq_work,
@@ -1871,7 +1871,7 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 		}
 		/* fall through */
 	case MUSB_QUIRK_A_DISCONNECT_19:
-		if (musb->quirk_retries) {
+		if (musb->quirk_retries && !musb->flush_irq_work) {
 			musb_dbg(musb,
 				 "Poll devctl on possible host mode disconnect");
 			schedule_delayed_work(&musb->irq_work,
@@ -2681,8 +2681,15 @@ static int musb_suspend(struct device *dev)
 
 	musb_platform_disable(musb);
 	musb_disable_interrupts(musb);
+
+	musb->flush_irq_work = true;
+	while (flush_delayed_work(&musb->irq_work))
+		;
+	musb->flush_irq_work = false;
+
 	if (!(musb->io.quirks & MUSB_PRESERVE_SESSION))
 		musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
 	WARN_ON(!list_empty(&musb->pending_list));
 
 	spin_lock_irqsave(&musb->lock, flags);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 9f22c5b8ce37..1830a571d025 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -428,6 +428,8 @@ struct musb {
 	unsigned		test_mode:1;
 	unsigned		softconnect:1;
 
+	unsigned		flush_irq_work:1;
+
 	u8			address;
 	u8			test_mode_nr;
 	u16			ackpend;		/* ep0 */
-- 
2.14.1

  parent reply	other threads:[~2017-09-07 13:39 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20170907133748.7400-1-johan@kernel.org>
2017-09-07 13:37 ` [PATCH v2 1/2] USB: musb: fix session-bit runtime-PM quirk Johan Hovold
2017-09-07 13:37 ` Johan Hovold [this message]
     [not found] ` <20171005091436.GA2618@localhost>
2017-10-05 15:11   ` [PATCH v2 0/2] USB: musb: PM fixes Tony Lindgren
     [not found]     ` <20171005151154.GD3962-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-10-05 15:14       ` Johan Hovold
2017-10-06 16:27         ` Bin Liu
     [not found]           ` <20171006162756.GD12182-zlS79ln5qqxp6PWD+TyudpdHMjK6IpyN@public.gmane.org>
2017-10-09  8:09             ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170907133748.7400-3-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=b-liu@ti.com \
    --cc=bigeasy@linutronix.de \
    --cc=felipe.balbi@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.