All of lore.kernel.org
 help / color / mirror / Atom feed
From: Clayton Craft <clayton@craftyguy.net>
To: ofono@ofono.org
Subject: Re: [PATCH 1/1] udev: add serial_info struct to modem
Date: Sat, 09 Sep 2017 10:40:33 -0700	[thread overview]
Message-ID: <20170909174033.GC3@computer.craftyguy.net> (raw)
In-Reply-To: <20170909090519.20523-1-jonas@southpole.se>

[-- Attachment #1: Type: text/plain, Size: 2595 bytes --]

Hi Jonas,

This looks MUCH better!! Just to re-cap, it took the application of
all three of the patches you sent over to get this to finally come up.


ofonod[1800]: plugins/nokia-gpio.c:phonet_status_cb() Link phonet0 (2) is down
ofonod[1800]: plugins/nokia-gpio.c:gpio_power_state_machine() (POWER_EVENT_PHONET_LINK_DOWN) @ state POWER_STATE_NONE
ofonod[1800]: plugins/nokia-gpio.c:gpio_power_set_state() (POWER_STATE_OFF) at (POWER_STATE_NONE)
ofonod[1800]: plugins/nokia-gpio.c:gpio_finish_modem_power_off()
ofonod[1800]: plugins/nokia-gpio.c:gpio_write() ("cmt_apeslpx", "inactive")
ofonod[1800]: plugins/nokia-gpio.c:gpio_write() ("cmt_rst_rq", "inactive")
ofonod[1800]: plugins/nokia-gpio.c:gpio_write() ("cmt_en", "inactive")
ofonod[1800]: plugins/nokia-gpio.c:gpio_write() ("cmt_rst", "inactive")
ofonod[1800]: plugins/nokia-gpio.c:gpio_write() ("cmt_rst", "active")
ofonod[1800]: plugins/n900.c:n900_power_cb() power state POWER_STATE_OFF
ofonod[1800]: plugins/n900.c:n900_enable() modem=0x617ad0 with 0x617cd0



localhost:/home/user/ofono# python2 test/list-modems
[ /n900_2 ]
    Features = sim
    Emergency = 0
    Powered = 1
    Lockdown = 0
    Interfaces = org.ofono.SimManager org.ofono.VoiceCallManager org.ofono.AudioSettings
    Online = 0
    Model = Nokia N900
    Revision = V ICPR82_10w08
25-02-10
RX-51
(c) Nokia
    Type = hardware
    Serial = 356938037199412
    Manufacturer = Nokia
    [ org.ofono.SimManager ]
        Present = 0
    [ org.ofono.VoiceCallManager ]
        EmergencyNumbers = 08 000 999 110 112 911 118 119
    [ org.ofono.AudioSettings ]
        Active = 0

Going to test some of the more 'advanced' features now :)

-Clayton


On Sat, Sep 09, 2017 at 11:05:19AM +0200, Jonas Bonn wrote:
>---
>Hi Clayton,
>
>Sorry, I messed up the earlier patch.  It should be like this, I think.
>
>/Jonas
>
> plugins/udevng.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/plugins/udevng.c b/plugins/udevng.c
>index 5767259..a4b99aa 100644
>--- a/plugins/udevng.c
>+++ b/plugins/udevng.c
>@@ -1355,7 +1355,7 @@ static void add_serial_device(struct udev_device *dev)
> 	info->subsystem = g_strdup(subsystem);
> 	info->dev = udev_device_ref(dev);
>
>-	modem->devices = g_slist_append(modem->devices, info);
>+	modem->serial = info;
> }
>
> static void add_device(const char *syspath, const char *devname,
>-- 
>2.9.3
>
>_______________________________________________
>ofono mailing list
>ofono(a)ofono.org
>https://lists.ofono.org/mailman/listinfo/ofono


  reply	other threads:[~2017-09-09 17:40 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-08  0:51 nokia-modem (N900) not detected after migration to udevng Clayton Craft
2017-09-08  1:13 ` Jonas Bonn
2017-09-08  1:17   ` Clayton Craft
2017-09-08  1:29     ` Jonas Bonn
2017-09-08  1:38       ` Clayton Craft
2017-09-08  2:12         ` Jonas Bonn
2017-09-09  3:09           ` Clayton Craft
2017-09-09  8:56             ` [PATCH 1/1] udev: add serial_info struct to modem Jonas Bonn
2017-09-09  9:05               ` Jonas Bonn
2017-09-09 17:40                 ` Clayton Craft [this message]
2017-09-09 17:58           ` nokia-modem (N900) not detected after migration to udevng Clayton Craft
2017-09-09 18:29             ` Denis Kenzior
2017-09-09 18:43               ` Clayton Craft
2017-09-09 20:34               ` Clayton Craft
2017-09-10 16:41                 ` [PATCH 1/1] isimodem: Use correct callback for pin status Clayton Craft
2017-09-10 17:47                   ` Denis Kenzior
2017-09-10 18:41                     ` Clayton Craft
2017-09-11 15:37                       ` Denis Kenzior
2017-09-11 15:44               ` nokia-modem (N900) not detected after migration to udevng Clayton Craft
2017-09-11 18:49                 ` Denis Kenzior
2017-09-11 19:54                   ` Clayton Craft
2017-09-12  7:51                     ` Jonas Bonn
2017-09-12  8:11                       ` [PATCH 1/2] udev: fixes for detection of non-USB modems Jonas Bonn
2017-09-12  8:11                         ` [PATCH 2/2] udev: isi modems do not use 'Device' property Jonas Bonn
2017-09-12 17:28                         ` [PATCH 1/2] udev: fixes for detection of non-USB modems Denis Kenzior
2017-09-08  3:17         ` [PATCH 1/1] udev: devnode is not a required modem property Jonas Bonn
2017-09-08  6:06           ` Clayton Craft
2017-09-08  8:07             ` [PATCH 1/1] udev: set driver for serial drivers Jonas Bonn
2017-09-08 15:25               ` Clayton Craft

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170909174033.GC3@computer.craftyguy.net \
    --to=clayton@craftyguy.net \
    --cc=ofono@ofono.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.