All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/6] ARM: rmobile: dts: Add EHCI USB nodes to r8a7796
Date: Tue, 26 Sep 2017 20:06:45 +0200	[thread overview]
Message-ID: <20170926180650.15484-1-marek.vasut+renesas@gmail.com> (raw)

The R8A7796 EHCI USB nodes are missing from r8a7796 dtsi, add them.
These nodes don't come from mainline Linux, yet the DT binding is
similar enough to R8A7795 which already has those in mainline and
once the nodes hit mainline, this DT should be resynched.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 arch/arm/dts/r8a7796.dtsi | 51 ++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 46 insertions(+), 5 deletions(-)

diff --git a/arch/arm/dts/r8a7796.dtsi b/arch/arm/dts/r8a7796.dtsi
index c0cb4a952f..7e3b1d82a1 100644
--- a/arch/arm/dts/r8a7796.dtsi
+++ b/arch/arm/dts/r8a7796.dtsi
@@ -1106,7 +1106,17 @@
 		};
 
 		hsusb: usb at e6590000 {
-			/* placeholder */
+			compatible = "renesas,usbhs-r8a7796",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
 		};
 
 		xhci0: usb at ee000000 {
@@ -1118,11 +1128,27 @@
 		};
 
 		ehci0: usb at ee080100 {
-			/* placeholder */
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
 		};
 
 		usb2_phy0: usb-phy at ee080200 {
-			/* placeholder */
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		ohci1: usb at ee0a0000 {
@@ -1130,11 +1156,26 @@
 		};
 
 		ehci1: usb at ee0a0100 {
-			/* placeholder */
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
 		};
 
 		usb2_phy1: usb-phy at ee0a0200 {
-			/* placeholder */
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		sdhi0: sd at ee100000 {
-- 
2.11.0

             reply	other threads:[~2017-09-26 18:06 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-26 18:06 Marek Vasut [this message]
2017-09-26 18:06 ` [U-Boot] [PATCH 2/6] ARM: rmobile: Move HSUSB configuration to board on Salvator-X Marek Vasut
2017-09-26 18:06 ` [U-Boot] [PATCH 3/6] ARM: rmobile: Move HSUSB configuration to board on ULCB Marek Vasut
2017-09-26 18:06 ` [U-Boot] [PATCH 4/6] ARM: rmobile: Enable EHCI generic on Salvator-X Marek Vasut
2017-09-26 18:06 ` [U-Boot] [PATCH 5/6] ARM: rmobile: Enable EHCI generic on ULCB Marek Vasut
2017-09-26 18:06 ` [U-Boot] [PATCH 6/6] usb: Drop the EHCI RCar Gen3 Marek Vasut
  -- strict thread matches above, loose matches on Subject: below --
2017-09-12 17:07 [U-Boot] [PATCH 1/6] ARM: rmobile: dts: Add EHCI USB nodes to r8a7796 Marek Vasut
2017-09-22 22:15 ` Nobuhiro Iwamatsu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170926180650.15484-1-marek.vasut+renesas@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.