From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Sun, 1 Oct 2017 10:49:30 -0400 Subject: [U-Boot] fsl_esdhc driver is broken with DM In-Reply-To: References: Message-ID: <20171001144930.GG3503@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sun, Oct 01, 2017 at 11:29:58AM -0300, Fabio Estevam wrote: > On Sat, Sep 30, 2017 at 12:35 PM, Fabio Estevam wrote: > > Hi, > > > > I noticed that fsl_esdhc is broken on 2017.09 for mx6slevk, when > > CONFIG_DM_MMC is selected: > > > > U-Boot 2017.09 (Sep 30 2017 - 12:31:17 -0300) > > > > CPU: Freescale i.MX6SL rev1.0 792 MHz (running at 396 MHz) > > CPU: Commercial temperature grade (0C to 95C) at 35C > > Reset cause: WDOG > > Model: Freescale i.MX6 SoloLite EVK Board > > Board: MX6SLEVK > > DRAM: 1 GiB > > PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x11 > > MMC: > > MMC Device 1 not found > > *** Warning - No MMC card found, using default environment > > Same regression is observed with mx7dsabresd board as well. It's likely to be all i.MX :( Have all of the changes gone in such that an i.MX platform with SPL can be non-interactively booted via imx_usb? Not having my iMX platforms in automated testing means that I always end up not testing them nearly often enough. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: