Hi,
Benchmark.Stream fails with ValueError: invalid literal for float() on x86 64-bit target.
The execution log has been pasted below for reference.
Please let me know how it can be fixed. Thanks in advance.
##### doing fuego phase: build ########
The test is already built
Fuego test_build duration=0 seconds
##### doing fuego phase: deploy ########
##### doing fuego phase: pre_deploy ########
##### doing fuego phase: test_deploy ########
##### doing fuego phase: post_deploy ########
##### doing fuego phase: run ########
WARNING: test log file parameter empty, so will use default
-------------------------------------------------------------
STREAM version $Revision: 5.9 $
-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 2000000, Offset = 0
Total memory required = 45.8 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Printing one line per active thread....
-------------------------------------------------------------
Your clock granularity/precision appears to be 1 microseconds.
Each test below will take on the order of 2795 microseconds.
(= 2795 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING -- The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function Rate (MB/s) Avg time Min time Max time
Copy: 8328.7451 0.0039 0.0038 0.0040
Scale: 7978.2279 0.0040 0.0040 0.0041
Add: 8857.6969 0.0055 0.0054 0.0057
Triad: 9012.3368 0.0054 0.0053 0.0054
-------------------------------------------------------------
Solution Validates
-------------------------------------------------------------
##### doing fuego phase: post_test ########
Teardown board link
##### doing fuego phase: processing ########
running python with PATH=/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
Reading current values from /fuego-rw/logs/Benchmark.Stream/TRAV-Ethernet-x86.default.2.2/testlog.txt
Traceback (most recent call last):
File "/fuego-core/engine/tests/Benchmark.Stream/parser.py", line 24, in <module>
sys.exit(plib.process_data(ref_section_pat, cur_dict, 's', 'Rate, MB/s'))
File "/fuego-core/engine/scripts/parser/common.py", line 600, in process_data
new_measure = {"name":measure, "measure": float(value)}
ValueError: invalid literal for float(): 9012.3368 0.0054
ERROR: results did not satisfy the threshold
Fuego: all test phases complete!
Build step 'Execute shell' marked build as failure
[description-setter] Description set: <a href="/storm/userContent/fuego.logs/Benchmark.Stream/TRAV-Ethernet-x86.default.2.2/testlog.txt">testlog</a> <a href="/storm/userContent/fuego.logs/Benchmark.Stream/TRAV-Ethernet-x86.default.2.2/run.json">run.json</a> <a href="/storm/userContent/fuego.logs/Benchmark.Stream/TRAV-Ethernet-x86.default.2.2/consolelog.txt">fuegolog</a> <a href="/storm/userContent/fuego.logs/Benchmark.Stream/TRAV-Ethernet-x86.default.2.2/devlog.txt">devlog</a> <a href="/storm/userContent/fuego.logs/Benchmark.Stream/TRAV-Ethernet-x86.default.2.2/prolog.sh">prolog.sh</a>
Finished: FAILURE
Regards,
Dhinakar,
Senior Technical Manager,
2-07-526, Phoenix Building,
+91-9902007650
Samsung Research Institute, Bangalore.
|