All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kelvin Cheung <keguang.zhang@gmail.com>
To: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org, Kelvin Cheung <keguang.zhang@gmail.com>
Subject: [PATCH] MIPS: loongson1: set default number of rx and tx queues for stmmac
Date: Fri,  6 Oct 2017 21:13:18 +0800	[thread overview]
Message-ID: <20171006131318.9033-1-keguang.zhang@gmail.com> (raw)

Set the default number of RX and TX queues due to
the recent changes of stmmac driver.
Otherwise the ethernet will crash once it starts.

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
---
 arch/mips/loongson32/common/platform.c | 38 +++++++++++++++++++---------------
 1 file changed, 21 insertions(+), 17 deletions(-)

diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index 100f23d..ac584c5 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -183,18 +183,20 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 }
 
 static struct plat_stmmacenet_data ls1x_eth0_pdata = {
-	.bus_id		= 0,
-	.phy_addr	= -1,
+	.bus_id			= 0,
+	.phy_addr		= -1,
 #if defined(CONFIG_LOONGSON1_LS1B)
-	.interface	= PHY_INTERFACE_MODE_MII,
+	.interface		= PHY_INTERFACE_MODE_MII,
 #elif defined(CONFIG_LOONGSON1_LS1C)
-	.interface	= PHY_INTERFACE_MODE_RMII,
+	.interface		= PHY_INTERFACE_MODE_RMII,
 #endif
-	.mdio_bus_data	= &ls1x_mdio_bus_data,
-	.dma_cfg	= &ls1x_eth_dma_cfg,
-	.has_gmac	= 1,
-	.tx_coe		= 1,
-	.init		= ls1x_eth_mux_init,
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
 };
 
 static struct resource ls1x_eth0_resources[] = {
@@ -222,14 +224,16 @@ struct platform_device ls1x_eth0_pdev = {
 
 #ifdef CONFIG_LOONGSON1_LS1B
 static struct plat_stmmacenet_data ls1x_eth1_pdata = {
-	.bus_id		= 1,
-	.phy_addr	= -1,
-	.interface	= PHY_INTERFACE_MODE_MII,
-	.mdio_bus_data	= &ls1x_mdio_bus_data,
-	.dma_cfg	= &ls1x_eth_dma_cfg,
-	.has_gmac	= 1,
-	.tx_coe		= 1,
-	.init		= ls1x_eth_mux_init,
+	.bus_id			= 1,
+	.phy_addr		= -1,
+	.interface		= PHY_INTERFACE_MODE_MII,
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
 };
 
 static struct resource ls1x_eth1_resources[] = {
-- 
1.9.1

                 reply	other threads:[~2017-10-06 13:13 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171006131318.9033-1-keguang.zhang@gmail.com \
    --to=keguang.zhang@gmail.com \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.