early console in setup code [ 0.000000] Linux version 4.13.0-rc4-00171-g4b88a5c (kbuild@lkp-ib03) (gcc version 4.8.4 (Debian 4.8.4-1)) #1 SMP PREEMPT Mon Oct 9 19:58:49 CST 2017 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init. [ 0.000000] CPU: Your system may be unstable. [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000170d1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000170d2000-0x00000000170fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: No reference (HPET/PMTIMER) available [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x170d2 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f6a50-0x000f6a5f] mapped at [b00f6a50] [ 0.000000] mpc: f6a60-f6b7c [ 0.000000] initial memory mapped: [mem 0x00000000-0x12bfffff] [ 0.000000] Base memory trampoline at [b009b000] 9b000 size 16384 [ 0.000000] BRK [0x12744000, 0x12744fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x1588b000-0x170cffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6840 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x00000000170E1628 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x00000000170E147C 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x00000000170E0040 00143C (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x00000000170E0000 000040 [ 0.000000] ACPI: APIC 0x00000000170E1570 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x00000000170E15F0 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffc000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 368MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 170d2000 [ 0.000000] low ram: 0 - 170d2000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:170d1001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 2117555590 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] BRK [0x12745000, 0x12745fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000170d1fff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000170d1fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000170d1fff] [ 0.000000] On node 0 totalpages: 94320 [ 0.000000] free_area_init_node: node 0, pgdat c0cd7c80, node_mem_map c54e9028 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 883 pages used for memmap [ 0.000000] Normal zone: 90322 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffb000 (fec00000) [ 0.000000] e820: [mem 0x17100000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 19 pages/cpu @c54c1000 s54080 r0 d23744 u77824 [ 0.000000] pcpu-alloc: s54080 r0 d23744 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 154c3ac0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 93397 [ 0.000000] Kernel command line: root=/dev/ram0 hung_task_panic=1 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-i0-201739/wfg:unwinder-josh:4b88a5c3f27e19bd236b3910299633a45cc25e34/.vmlinuz-4b88a5c3f27e19bd236b3910299633a45cc25e34-20171009195935-289:quantal-intel12-14 branch=wfg/unwinder-josh BOOT_IMAGE=/pkg/linux/i386-randconfig-i0-201739/gcc-4.8/4b88a5c3f27e19bd236b3910299633a45cc25e34/vmlinuz-4.13.0-rc4-00171-g4b88a5c drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 381764 bytes of page_ext [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 303376K/377280K available (10714K kernel code, 3439K rwdata, 5652K rodata, 916K init, 23160K bss, 73904K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffe66000 - 0xfffff000 (1636 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xc78d2000 - 0xff7fe000 ( 895 MB) [ 0.000000] lowmem : 0xb0000000 - 0xc70d2000 ( 368 MB) [ 0.000000] .init : 0xc0f70000 - 0xc1055000 ( 916 kB) [ 0.000000] .data : 0xc0676a62 - 0xc0f58d80 (9096 kB) [ 0.000000] .text : 0xbfc00000 - 0xc0676a62 (10714 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] [ 0.000000] ********************************************************** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ** ** [ 0.000000] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000] ** ** [ 0.000000] ** This means that this is a DEBUG kernel and it is ** [ 0.000000] ** unsafe for production use. ** [ 0.000000] ** ** [ 0.000000] ** If you see this message and you are not debugging ** [ 0.000000] ** the kernel, report this immediately to your vendor! ** [ 0.000000] ** ** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ********************************************************** [ 0.010000] Running RCU self tests [ 0.010000] Preemptible hierarchical RCU implementation. [ 0.010000] RCU lockdep checking is enabled. [ 0.010000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.010000] RCU debug extended QS entry/exit. [ 0.010000] RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). [ 0.010000] Tasks RCU enabled. [ 0.010000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.010000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 [ 0.010000] CPU 0 irqstacks, hard=c51e2000 soft=c51e4000 [ 0.010000] console [ttyS0] enabled [ 0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.010000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.010000] ... MAX_LOCK_DEPTH: 48 [ 0.010000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.010000] ... CLASSHASH_SIZE: 4096 [ 0.010000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.010000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.010000] ... CHAINHASH_SIZE: 32768 [ 0.010000] memory used by lock dependency info: 4399 kB [ 0.010000] per task-struct memory footprint: 1344 bytes [ 0.010000] ------------------------ [ 0.010000] | Locking API testsuite: [ 0.010000] ---------------------------------------------------------------------------- [ 0.010000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] A-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.010000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.010000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.010000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.010000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.010000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.010000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.010000] double unlock: ok | ok | ok | ok | ok | ok | ok | [ 0.010000] initialize held: ok | ok | ok | ok | ok | ok | ok | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] recursive read-lock: | ok | | ok | [ 0.010000] recursive read-lock #2: | ok | | ok | [ 0.010000] mixed read-write-lock: | ok | | ok | [ 0.010000] mixed write-read-lock: | ok | | ok | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.010000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.010000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.010000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.010000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.010000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.010000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.010000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.010000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.010000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.010000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.010000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.010000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.010000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.010000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.010000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.010000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.010000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.010000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.010000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.010000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.010000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.010000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.010000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.010000] hard-irq read-recursion/123: ok | [ 0.010000] soft-irq read-recursion/123: ok | [ 0.010000] hard-irq read-recursion/132: ok | [ 0.010000] soft-irq read-recursion/132: ok | [ 0.010000] hard-irq read-recursion/213: ok | [ 0.010000] soft-irq read-recursion/213: ok | [ 0.010000] hard-irq read-recursion/231: ok | [ 0.010000] soft-irq read-recursion/231: ok | [ 0.010000] hard-irq read-recursion/312: ok | [ 0.010000] soft-irq read-recursion/312: ok | [ 0.010000] hard-irq read-recursion/321: ok | [ 0.010000] soft-irq read-recursion/321: ok | [ 0.010000] -------------------------------------------------------------------------- [ 0.010000] | Wound/wait tests | [ 0.010000] --------------------- [ 0.010000] ww api failures: ok | ok | ok | [ 0.010000] ww contexts mixing: ok | ok | [ 0.010000] finishing ww context: ok | ok | ok | ok | [ 0.010000] locking mismatches: ok | ok | ok | [ 0.010000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.010000] spinlock nest unlocked: ok | [ 0.010000] ----------------------------------------------------- [ 0.010000] |block | try |context| [ 0.010000] ----------------------------------------------------- [ 0.010000] context: ok | ok | ok | [ 0.010000] try: ok | ok | ok | [ 0.010000] block: ok | ok | ok | [ 0.010000] spinlock: ok | ok | ok | [ 0.010000] ------------------------------------------------------- [ 0.010000] Good, all 256 testcases passed! | [ 0.010000] --------------------------------- [ 0.010000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.010000] hpet clockevent registered [ 0.010046] tsc: Detected 2926.328 MHz processor [ 0.011319] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.011550] Calibrating delay loop (skipped) preset value.. 5852.65 BogoMIPS (lpj=29263280) [ 0.020036] pid_max: default: 32768 minimum: 301 [ 0.021287] ACPI: Core revision 20170531 [ 0.048196] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.050453] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060039] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.064227] mce: CPU supports 10 MCE banks [ 0.065290] mce: unknown CPU type - not enabling MCE support [ 0.070037] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.071427] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.074247] Freeing SMP alternatives memory: 20K [ 0.092310] smpboot: Max logical packages: 2 [ 0.093619] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.095223] enabled ExtINT on CPU#0 [ 0.098257] ENABLING IO-APIC IRQs [ 0.100073] init IO_APIC IRQs [ 0.100859] apic 0 pin 0 not connected [ 0.101965] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.104849] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.107117] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.110000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.110000] apic 0 pin 16 not connected [ 0.110000] apic 0 pin 17 not connected [ 0.110000] apic 0 pin 18 not connected [ 0.110000] apic 0 pin 19 not connected [ 0.110000] apic 0 pin 20 not connected [ 0.110000] apic 0 pin 21 not connected [ 0.110000] apic 0 pin 22 not connected [ 0.110000] apic 0 pin 23 not connected [ 0.110000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.110000] Using local APIC timer interrupts. [ 0.110000] calibrating APIC timer ... [ 0.110000] ... lapic delta = 6957391 [ 0.110000] ... PM-Timer delta = 398460 [ 0.110000] APIC calibration not consistent with PM-Timer: 111ms instead of 100ms [ 0.110000] APIC delta adjusted to PM-Timer: 6250127 (6957391) [ 0.110000] TSC delta adjusted to PM-Timer: 292631135 (325745214) [ 0.110000] ..... delta 6250127 [ 0.110000] ..... mult: 268440910 [ 0.110000] ..... calibration result: 10000203 [ 0.110000] ..... CPU clock speed is 2926.3113 MHz. [ 0.110000] ..... host bus clock speed is 1000.0203 MHz. [ 0.110147] smpboot: CPU0: GenuineIntel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1) [ 0.150095] Performance Events: no PMU driver, software events only. [ 0.170048] Hierarchical SRCU implementation. [ 0.230136] smp: Bringing up secondary CPUs ... [ 0.312384] CPU 1 irqstacks, hard=c53c0000 soft=c53c2000 [ 0.314642] x86: Booting SMP configuration: [ 0.315794] .... node #0, CPUs: #1 [ 0.000000] Initializing CPU#1 [ 0.010000] kvm-clock: cpu 1, msr 0:170d1041, secondary cpu clock [ 0.010000] masked ExtINT on CPU#1 [ 0.340141] KVM setup async PF for cpu 1 [ 0.340141] kvm-stealtime: cpu 1, msr 154d6ac0 [ 0.343075] smp: Brought up 1 node, 2 CPUs [ 0.344318] smpboot: Total of 2 processors activated (11705.31 BogoMIPS) [ 0.360040] devtmpfs: initialized [ 0.373482] workqueue: round-robin CPU selection forced, expect performance impact [ 0.400757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.403085] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.404853] prandom: seed boundary self test passed [ 0.407598] prandom: 100 self tests passed [ 0.409315] regulator-dummy: no parameters [ 0.411212] NET: Registered protocol family 16 [ 0.430048] cpuidle: using governor ladder [ 0.432763] ACPI: bus type PCI registered [ 0.434926] PCI: PCI BIOS revision 2.10 entry at 0xfd501, last bus=0 [ 0.436670] PCI: Using configuration type 1 for base access [ 0.521196] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages [ 0.532877] gpio-f7188x: Not a Fintek device at 0x0000002e [ 0.535195] gpio-f7188x: Not a Fintek device at 0x0000004e [ 0.540915] ACPI: Added _OSI(Module Device) [ 0.542090] ACPI: Added _OSI(Processor Device) [ 0.543277] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.545281] ACPI: Added _OSI(Processor Aggregator Device) [ 0.593050] ACPI: Interpreter enabled [ 0.593986] ACPI: (supports S0 S5) [ 0.600053] ACPI: Using IOAPIC for interrupt routing [ 0.601269] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.744290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.750056] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.751651] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.760072] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.770716] PCI host bridge to bus 0000:00 [ 0.771945] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.773933] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.775723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.780045] pci_bus 0000:00: root bus resource [mem 0x17100000-0xfebfffff window] [ 0.790037] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.791543] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.795765] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.800774] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.884291] pci 0000:00:01.1: reg 0x20: [io 0xc200-0xc20f] [ 0.910080] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.912157] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.913972] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.920028] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.930892] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.940876] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.943704] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.951550] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 [ 0.980050] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref] [ 1.020046] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff] [ 1.110049] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 1.113739] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 1.130033] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 1.150036] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 1.258200] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 1.271773] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 1.290129] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 1.310040] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 1.370044] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref] [ 1.392997] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 1.420045] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 1.440033] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 1.500036] pci 0000:00:05.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref] [ 1.532992] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 1.560033] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 1.590045] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [ 1.660038] pci 0000:00:06.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref] [ 1.693923] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 1.720037] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [ 1.740097] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [ 1.810045] pci 0000:00:07.0: reg 0x20: [mem 0xfe00c000-0xfe00ffff 64bit pref] [ 1.853605] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 1.870039] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [ 1.890032] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [ 1.950036] pci 0000:00:08.0: reg 0x20: [mem 0xfe010000-0xfe013fff 64bit pref] [ 1.982938] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 2.010033] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [ 2.030036] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [ 2.110034] pci 0000:00:09.0: reg 0x20: [mem 0xfe014000-0xfe017fff 64bit pref] [ 2.133289] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 2.170035] pci 0000:00:0a.0: reg 0x10: [io 0xc1c0-0xc1ff] [ 2.190032] pci 0000:00:0a.0: reg 0x14: [mem 0xfebf7000-0xfebf7fff] [ 2.260038] pci 0000:00:0a.0: reg 0x20: [mem 0xfe018000-0xfe01bfff 64bit pref] [ 2.282920] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000 [ 2.310032] pci 0000:00:0b.0: reg 0x10: [mem 0xfebf8000-0xfebf800f] [ 2.410385] pci_bus 0000:00: on NUMA node 0 [ 2.422731] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 2.430079] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 2.432890] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 2.435626] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 2.440555] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 2.444883] ACPI: Enabled 2 GPEs in block 00 to 0F [ 2.470215] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 2.472264] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.480053] pci 0000:00:02.0: vgaarb: bridge control possible [ 2.481936] vgaarb: loaded [ 2.484761] ACPI: bus type USB registered [ 2.490203] usbcore: registered new interface driver usbfs [ 2.492147] usbcore: registered new interface driver hub [ 2.500159] usbcore: registered new device driver usb [ 2.502240] pps_core: LinuxPPS API ver. 1 registered [ 2.503748] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.510097] EDAC MC: Ver: 3.0.0 [ 2.512231] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 2.540542] Unable to find dmi tokens [ 2.550422] FPGA manager framework [ 2.551583] PCI: Using ACPI for IRQ routing [ 2.553215] PCI: pci_cache_line_size set to 64 bytes [ 2.555626] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 2.557445] e820: reserve RAM buffer [mem 0x170d2000-0x17ffffff] [ 2.621148] clocksource: Switched to clocksource kvm-clock [ 2.639634] Warning: could not register all branches stats [ 2.641502] Warning: could not register annotated branches stats [ 2.816748] VFS: Disk quotas dquot_6.6.0 [ 2.818248] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.820851] FS-Cache: Loaded [ 2.822337] pnp: PnP ACPI init [ 2.823982] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.826531] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.829150] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 2.831338] pnp 00:03: [dma 2] [ 2.832482] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 2.835076] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 2.837812] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.840370] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.844260] pnp: PnP ACPI: found 7 devices [ 2.882715] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.885996] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.887916] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.889846] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.892208] pci_bus 0000:00: resource 7 [mem 0x17100000-0xfebfffff window] [ 2.895254] NET: Registered protocol family 1 [ 2.896614] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 2.898408] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 2.900395] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 2.902634] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.905763] PCI: CLS 0 bytes, default 64 [ 2.907829] Unpacking initramfs... [ 9.538947] Freeing initrd memory: 24852K [ 9.571473] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2e6a714ac, max_idle_ns: 440795306413 ns [ 9.575581] Machine check injector initialized [ 9.655010] The force parameter has not been set to 1. The Iris poweroff handler will not be installed. [ 9.657392] NatSemi SCx200 Driver [ 9.669046] spin_lock-torture:--- Start of test [debug]: nwriters_stress=4 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 9.679990] spin_lock-torture: Creating torture_shuffle task [ 9.715173] spin_lock-torture: Creating torture_stutter task [ 9.717233] spin_lock-torture: torture_shuffle task started [ 9.719893] spin_lock-torture: Creating lock_torture_writer task [ 9.721970] spin_lock-torture: torture_stutter task started [ 9.723703] spin_lock-torture: Creating lock_torture_writer task [ 9.734976] spin_lock-torture: lock_torture_writer task started [ 9.736981] spin_lock-torture: Creating lock_torture_writer task [ 9.738896] spin_lock-torture: Creating lock_torture_writer task [ 9.741351] spin_lock-torture: lock_torture_writer task started [ 9.743029] spin_lock-torture: lock_torture_writer task started [ 9.750045] spin_lock-torture: Creating lock_torture_stats task [ 9.758124] spin_lock-torture: lock_torture_stats task started [ 9.769043] spin_lock-torture: lock_torture_writer task started [ 9.833498] Key type blacklist registered [ 9.835224] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 9.977687] zbud: loaded [ 9.998311] orangefs_debugfs_init: called with debug mask: :none: :0: [ 10.000788] orangefs_init: module version upstream loaded [ 11.107868] Key type asymmetric registered [ 11.131253] test_string_helpers: Running tests... [ 11.155596] test_hexdump: all 1184 tests passed [ 11.162835] test_firmware: interface ready [ 11.283701] test_hash: __hash_32() has no arch implementation to test. [ 11.285393] test_hash: hash_32() has no arch implementation to test. [ 11.286872] test_hash: hash_64() has no arch implementation to test. [ 11.288483] test_hash: 33152 tests passed. [ 11.289614] test_siphash: self-tests: pass [ 11.304787] Running rhashtable test nelem=8, max_size=0, shrinking=0 [ 11.306309] Test 00: [ 11.308490] Adding 50000 keys [ 12.964648] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 13.955607] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 13.972996] Deleting 50000 keys [ 14.665164] Duration of test: 3355789984 ns [ 14.666393] Test 01: [ 14.668622] Adding 50000 keys [ 16.378152] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 17.265377] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 17.269813] Deleting 50000 keys [ 18.191837] Duration of test: 3522357851 ns [ 18.195104] Test 02: [ 18.205617] Adding 50000 keys [ 19.962095] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 20.977688] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 21.002180] Deleting 50000 keys [ 21.723458] Duration of test: 3515280762 ns [ 21.769074] Test 03: [ 21.772975] Adding 50000 keys [ 23.375149] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 24.117115] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 24.128126] Deleting 50000 keys [ 24.795623] Duration of test: 3016654721 ns [ 24.797169] Average test time: 3352520829 [ 24.798392] Testing concurrent rhashtable access from 10 threads [ 72.241860] Started 10 threads, 0 failed [ 72.247994] test passed [ 72.249669] test_printf: all 260 tests passed [ 72.981318] test_bitmap: all 460506 tests passed [ 72.997112] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1 [ 72.998580] crc32: self tests passed, processed 225944 bytes in 8489955 nsec [ 73.008849] crc32c: CRC_LE_BITS = 1 [ 73.009849] crc32c: self tests passed, processed 225944 bytes in 2750966 nsec [ 73.798021] crc32_combine: 8373 self tests passed [ 74.817793] crc32c_combine: 8373 self tests passed [ 74.830516] atomic64_test: passed for i386+ platform with CX8 and with SSE [ 74.832166] glob: 64 self-tests passed, 0 failed [ 74.833316] interval tree insert/remove [ 84.977221] Writes: Total: 4 Max/Min: 0/0 Fail: 0 [ 85.976874] -> 326096 cycles [ 85.982725] interval tree search [ 92.908444] -> 2026682 cycles (2692 results) [ 92.922359] no IO addresses supplied [ 92.923602] usbcore: registered new interface driver udlfb [ 92.925105] ipmi message handler version 39.2 [ 92.926444] IPMI System Interface driver. [ 92.928115] ipmi_si: Unable to find any System Interface(s) [ 92.930441] IPMI SSIF Interface driver [ 92.941928] IPMI Watchdog: driver initialized [ 92.943036] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 92.947610] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 92.949730] ACPI: Power Button [PWRF] [ 93.586656] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 93.693353] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 93.752819] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 93.768877] lp: driver loaded but no devices found [ 93.770878] Non-volatile memory driver v1.3 [ 93.773656] scx200_gpio: no SCx200 gpio present [ 93.780585] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 93.784167] platform pc8736x_gpio.0: no device found [ 93.793112] nsc_gpio initializing [ 93.799134] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 93.800629] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 93.814971] drm_mm: Testing DRM range manger (struct drm_mm), with random_seed=0xbbb9c118 max_iterations=8192 max_prime=128 [ 93.825184] drm_mm: igt_sanitycheck - ok! [ 156.242243] Writes: Total: 4 Max/Min: 0/0 Fail: 0 [ 229.394611] Writes: Total: 4 Max/Min: 0/0 Fail: 0 [ 296.255906] Writes: Total: 4 Max/Min: 0/0 Fail: 0 [ 361.439166] Writes: Total: 4 Max/Min: 0/0 Fail: 0 [ 402.291753] parport_pc 00:04: reported by Plug and Play ACPI [ 402.294261] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] [ 402.297938] lp0: using parport0 (interrupt-driven). [ 402.321861] dummy-irq: no IRQ given. Use irq=N [ 402.327157] usbcore: registered new interface driver rtsx_usb [ 402.333433] usbcore: registered new interface driver viperboard [ 402.338510] parport0: cannot grant exclusive access for device spi-lm70llp [ 402.340751] spi_lm70llp: spi_lm70llp probe fail, status -12 [ 402.359927] parport0: cannot grant exclusive access for device ks0108 [ 402.362082] ks0108: ERROR: parport didn't register new device [ 402.363762] cfag12864b: ERROR: ks0108 is not initialized [ 402.366036] cfag12864bfb: ERROR: cfag12864b is not initialized [ 402.567773] panel: panel driver registered on parport0 (io=0x378). [ 402.578581] usbcore: registered new interface driver hwa-rc [ 402.599514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 402.601208] ehci-pci: EHCI PCI platform driver [ 402.602910] ehci-platform: EHCI generic platform driver [ 402.605055] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 402.606858] ohci-pci: OHCI PCI platform driver [ 402.608246] ohci-platform: OHCI generic platform driver [ 402.620443] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 402.622840] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 402.628453] usbcore: registered new interface driver wusb-cbaf [ 402.630088] usbcore: registered new interface driver cdc_wdm [ 402.651801] usbcore: registered new interface driver mdc800 [ 402.664517] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 402.666815] usbcore: registered new interface driver adutux [ 402.668498] usbcore: registered new interface driver appledisplay [ 402.671130] usbcore: registered new interface driver cytherm [ 402.678143] usbcore: registered new interface driver emi62 - firmware loader [ 402.680121] ftdi_elan: driver ftdi-elan [ 402.681895] usbcore: registered new interface driver ftdi-elan [ 402.683527] usbcore: registered new interface driver iowarrior [ 402.685200] usbcore: registered new interface driver isight_firmware [ 402.686978] usbcore: registered new interface driver usblcd [ 402.700348] usbcore: registered new interface driver ldusb [ 402.702166] usbcore: registered new interface driver legousbtower [ 402.703846] usbcore: registered new interface driver rio500 [ 402.705378] usbcore: registered new interface driver usbtest [ 402.707001] usbcore: registered new interface driver usb_ehset_test [ 402.708761] usbcore: registered new interface driver uss720 [ 402.721294] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 402.723814] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 402.725658] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 402.727551] uss720: If you just want to connect to a printer, use usblp instead [ 402.729666] usbcore: registered new interface driver usbsevseg [ 402.731703] usbcore: registered new interface driver yurex [ 402.734350] usbcore: registered new interface driver sisusb [ 402.735942] usbcore: registered new interface driver lvs [ 402.739378] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 402.745122] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 402.747544] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 402.749259] parport0: cannot grant exclusive access for device parkbd [ 402.963166] mousedev: PS/2 mouse device common for all mice [ 402.964151] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 402.965531] usbcore: registered new interface driver appletouch [ 402.966498] usbcore: registered new interface driver bcm5974 [ 402.968280] usbcore: registered new interface driver xpad [ 402.969234] usbcore: registered new interface driver gtco [ 402.970145] usbcore: registered new interface driver hanwang [ 402.971109] usbcore: registered new interface driver kbtab [ 402.972054] usbcore: registered new interface driver pegasus_notetaker [ 402.986062] i2c /dev entries driver [ 402.986850] usbcore: registered new interface driver i2c-tiny-usb [ 402.989726] pps pps0: new PPS source ktimer [ 402.991194] pps pps0: ktimer PPS source registered [ 402.993360] Driver for 1-wire Dallas network protocol. [ 403.001599] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 403.001816] usbcore: registered new interface driver DS9490R [ 403.001821] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 403.004585] applesmc: supported laptop not found! [ 403.004590] applesmc: driver init failed (ret=-19)! [ 403.006820] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 403.016249] pc87360: PC8736x not detected, module not inserted [ 403.017105] sdhci: Secure Digital Host Controller Interface driver [ 403.017108] sdhci: Copyright(c) Pierre Ossman [ 403.017111] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 403.017114] wbsd: Copyright(c) Pierre Ossman [ 403.017258] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 403.071577] usbcore: registered new interface driver vub300 [ 403.118106] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 403.124308] hidraw: raw HID events driver (C) Jiri Kosina [ 403.167776] usbcore: registered new interface driver usbkbd [ 403.169433] usbcore: registered new interface driver usbmouse [ 403.187089] fake-fmc-carrier: mezzanine 0 [ 403.188201] Manufacturer: fake-vendor [ 403.189309] Product name: fake-design-for-testing [ 403.191276] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 403.194010] fmc_trivial: probe of fake-design-for-testing-f001 failed with error -95 [ 403.196290] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 403.198189] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards [ 403.209847] start plist test [ 403.369636] end plist test [ 403.370338] mce: Unable to init MCE device (rc: -5) [ 403.373400] ... APIC ID: 00000000 (0) [ 403.374108] ... APIC VERSION: 01050014 [ 403.374725] 0000000000000000000000000000000000000000000000000000000000000000 [ 403.375882] 0000000000000000000000000000000000000000000000000000000000000000 [ 403.376991] 0000000000000000000000000000000000000000000000000000000000000000 [ 403.378125] number of MP IRQ sources: 15. [ 403.379148] number of IO-APIC #0 registers: 24. [ 403.380277] testing the IO APIC....................... [ 403.381764] IO APIC #0...... [ 403.382579] .... register #00: 00000000 [ 403.383623] ....... : physical APIC id: 00 [ 403.384776] ....... : Delivery Type: 0 [ 403.385856] ....... : LTS : 0 [ 403.386911] .... register #01: 00170011 [ 403.387925] ....... : max redirection entries: 17 [ 403.389267] ....... : PRQ implemented: 0 [ 403.390478] ....... : IO APIC version: 11 [ 403.391757] .... register #02: 00000000 [ 403.392759] ....... : arbitration: 00 [ 403.393845] .... IRQ redirection table: [ 403.394865] IOAPIC 0: [ 403.395554] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 403.397489] pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(03), M(1) [ 403.399534] pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(03), M(1) [ 403.401886] pin03, enabled , edge , high, V(33), IRR(0), S(0), logical , D(03), M(1) [ 403.403839] pin04, enabled , edge , high, V(34), IRR(0), S(0), logical , D(03), M(1) [ 403.405848] pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(03), M(1) [ 403.407823] pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(03), M(1) [ 403.409726] pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(03), M(1) [ 403.412089] pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(03), M(1) [ 403.414094] pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(03), M(1) [ 403.415987] pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(03), M(1) [ 403.417923] pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(03), M(1) [ 403.419836] pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(03), M(1) [ 403.421871] pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(03), M(1) [ 403.423792] pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(03), M(1) [ 403.425831] pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(03), M(1) [ 403.427868] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 403.431104] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 403.433237] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 403.435400] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 403.437545] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 403.439579] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 403.441794] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 403.443812] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 403.445768] IRQ to pin mappings: [ 403.446667] IRQ0 -> 0:2 [ 403.447409] IRQ1 -> 0:1 [ 403.448162] IRQ3 -> 0:3 [ 403.448866] IRQ4 -> 0:4 [ 403.449629] IRQ5 -> 0:5 [ 403.450383] IRQ6 -> 0:6 [ 403.451154] IRQ7 -> 0:7 [ 403.452052] IRQ8 -> 0:8 [ 403.452843] IRQ9 -> 0:9 [ 403.453640] IRQ10 -> 0:10 [ 403.454441] IRQ11 -> 0:11 [ 403.455307] IRQ12 -> 0:12 [ 403.456154] IRQ13 -> 0:13 [ 403.456984] IRQ14 -> 0:14 [ 403.457789] IRQ15 -> 0:15 [ 403.458634] .................................... done. [ 403.460129] Using IPI Shortcut mode [ 403.461254] sched_clock: Marking stable (403451972963, 0)->(408240012298, -4788039335) [ 403.467572] page_owner is disabled [ 403.479595] Key type big_key registered [ 403.483971] Key type trusted registered [ 403.487011] Key type encrypted registered [ 403.511069] OF: Duplicate name in testcase-data, renamed to "duplicate-name#1" [ 403.539215] ### dt-test ### start of unittest - you will see error messages [ 403.543828] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 403.546912] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 403.549959] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 403.552097] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 403.554179] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 403.556262] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 403.636340] OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8 [ 403.639062] OF: overlay: overlay #5 is not topmost [ 403.688599] i2c i2c-0: Added multiplexed i2c bus 1 [ 403.710643] i2c i2c-0: Added multiplexed i2c bus 2 [ 403.748630] ### dt-test ### FAIL of_unittest_overlay_high_level():2188 overlay_base_root not initialized [ 403.751322] ### dt-test ### end of unittest - 188 passed, 1 failed [ 403.763107] Freeing unused kernel memory: 916K [ 403.767384] Write protecting the kernel text: 10716k [ 403.775221] Write protecting the kernel read-only data: 5656k [ 404.376159] init: Failed to create pty - disabling logging for job [ 404.378383] init: Temporary process spawn error: No such file or directory [ 404.437418] init: Failed to create pty - disabling logging for job [ 404.440087] init: Temporary process spawn error: No such file or directory [ 404.616895] init: Failed to create pty - disabling logging for job [ 404.620141] init: Temporary process spawn error: No such file or directory [ 404.629862] init: Failed to create pty - disabling logging for job [ 404.631970] init: Temporary process spawn error: No such file or directory [ 404.880068] init: Failed to create pty - disabling logging for job [ 404.882289] init: Temporary process spawn error: No such file or directory [ 404.902772] init: Failed to create pty - disabling logging for job [ 404.904781] init: Temporary process spawn error: No such file or directory [ 404.920007] init: Failed to create pty - disabling logging for job [ 404.923690] init: Temporary process spawn error: No such file or directory [ 404.939742] init: Failed to create pty - disabling logging for job [ 404.941699] init: Temporary process spawn error: No such file or directory [ 404.948035] WARNING: kernel stack frame pointer at c6ea3ecd in init:212 has bad value (null) [ 404.968678] init: plymouth-log main process (211) terminated with status 1 [ 404.980508] init: Failed to create pty - disabling logging for job [ 404.982676] init: Temporary process spawn error: No such file or directory [ 405.039769] udevd[220]: starting version 175 [ 405.049629] init: Failed to create pty - disabling logging for job [ 405.052201] init: Temporary process spawn error: No such file or directory [ 405.075346] init: Failed to create pty - disabling logging for job [ 405.077454] init: Temporary process spawn error: No such file or directory [ 405.088010] init: Failed to create pty - disabling logging for job [ 405.090249] init: Temporary process spawn error: No such file or directory udevd[227]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYSTM:': No such file or directory udevd[231]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv fmc': No such file or directory udevd[236]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory udevd[239]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00': No such file or directory udevd[240]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007010sv00001AF4sd00001100bc01sc01i80': No such file or directory udevd[241]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007113sv00001AF4sd00001100bc06sc80i00': No such file or directory udevd[235]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory udevd[238]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00': No such file or directory udevd[237]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0019v0000p0001e0000-e0,1,k74,ramlsfw': No such file or directory udevd[246]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A03:': No such file or directory udevd[244]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:ACPI0010:PNP0A05:': No such file or directory udevd[242]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001234d00001111sv00001AF4sd00001100bc03sc00i00': No such file or directory udevd[250]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d0000100Esv00001AF4sd00001100bc02sc00i00': No such file or directory udevd[251]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory udevd[245]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory udevd[252]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory udevd[256]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory udevd[255]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory udevd[259]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXCPU:': No such file or directory udevd[262]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory udevd[261]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory udevd[257]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory udevd[263]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory udevd[264]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:QEMU0002:': No such file or directory udevd[271]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001AF4d00001001sv00001AF4sd00000002bc01sc00i00': No such file or directory udevd[260]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXCPU:': No such file or directory udevd[300]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0303:': No such file or directory udevd[304]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory udevd[307]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0F13:': No such file or directory udevd[303]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory udevd[314]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:QEMU0002:': No such file or directory udevd[311]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001AF4d00001001sv00001AF4sd00000002bc01sc00i00': No such file or directory udevd[309]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001AF4d00001001sv00001AF4sd00000002bc01sc00i00': No such file or directory udevd[301]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0400:': No such file or directory udevd[312]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001AF4d00001001sv00001AF4sd00000002bc01sc00i00': No such file or directory udevd[308]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001AF4d00001001sv00001AF4sd00000002bc01sc00i00': No such file or directory udevd[315]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory udevd[306]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0B00:': No such file or directory udevd[305]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0700:': No such file or directory udevd[310]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001AF4d00001001sv00001AF4sd00000002bc01sc00i00': No such file or directory udevd[313]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d000025ABsv00001AF4sd00001100bc08sc80i00': No such file or directory udevd[302]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001AF4d00001001sv00001AF4sd00000002bc01sc00i00': No such file or directory udevd[316]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:dell_rbu': No such file or directory udevd[320]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:platform-framebuffer': No such file or directory udevd[319]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:memconsole': No such file or directory udevd[317]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw': No such file or directory udevd[321]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv of:Ni2c-test-busTCunittest-i2c-bus': No such file or directory udevd[318]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv serio:ty01pr00id00ex00': No such file or directory udevd[322]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv of:Ntestcase-device1TCtestcase-device': No such file or directory udevd[324]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:vpd': No such file or directory udevd[323]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv of:Ntestcase-device2TCtestcase-device': No such file or directory [ 406.207882] init: Failed to create pty - disabling logging for job [ 406.209181] init: Temporary process spawn error: No such file or directory [ 406.234435] init: Failed to create pty - disabling logging for job [ 406.235619] init: Temporary process spawn error: No such file or directory [ 406.278175] init: Failed to create pty - disabling logging for job [ 406.279290] init: Temporary process spawn error: No such file or directory [ 406.303929] init: Failed to create pty - disabling logging for job [ 406.305359] init: Temporary process spawn error: No such file or directory [ 407.099273] init: failsafe main process (333) killed by TERM signal [ 407.752152] init: Failed to create pty - disabling logging for job [ 407.754186] init: Temporary process spawn error: No such file or directory [ 407.777952] init: Failed to create pty - disabling logging for job [ 407.779992] init: Temporary process spawn error: No such file or directory [ 407.805831] init: Failed to create pty - disabling logging for job [ 407.808039] init: Temporary process spawn error: No such file or directory [ 407.836904] init: Failed to create pty - disabling logging for job [ 407.839915] init: Temporary process spawn error: No such file or directory [ 407.875806] init: Failed to create pty - disabling logging for job [ 407.877819] init: Temporary process spawn error: No such file or directory Kernel tests: Boot OK! Trinity v1.4pre Dave Jones [init] Marking syscall get_robust_list (312) as to be disabled. Done parsing arguments. Marking all syscalls as enabled. [init] Disabling syscalls marked as disabled by command line options [init] Marked syscall get_robust_list (312) as deactivated. [init] Enabled 350 syscalls. Disabled 1 syscalls. DANGER: RUNNING AS ROOT. Unless you are running in a virtual machine, this could cause serious problems such as overwriting CMOS or similar which could potentially make this machine unbootable without a firmware reset. ctrl-c now unless you really know what you are doing. [ 409.046893] init: Temporary process spawn error: No such file or directory [ 409.097067] init: Failed to create pty - disabling logging for job [ 409.099206] init: Temporary process spawn error: No such file or directory [ 409.141111] init: udev-fallback-graphics main process (457) terminated with status 127 [ 409.150373] init: Failed to create pty - disabling logging for job [ 409.151627] init: Temporary process spawn error: No such file or directory [ 409.329315] init: networking main process (463) terminated with status 1 [ 417.781585] init: tty4 main process ended, respawning [ 417.810826] init: tty5 main process (412) terminated with status 1 [ 417.812022] init: tty5 main process ended, respawning [ 417.840380] init: tty2 main process (413) terminated with status 1 [ 417.841564] init: tty2 main process ended, respawning [ 417.880460] init: tty3 main process (414) terminated with status 1 [ 417.881549] init: tty3 main process ended, respawning [ 417.930317] init: tty6 main process (415) terminated with status 1 [ 417.931406] init: tty6 main process ended, respawning [init] Started watchdog process, PID is 476 [main] Main thread is alive. [main] Setsockopt(1 24 80d3000 4) on fd 7 [1:1:1] [main] Setsockopt(1 12 80d3000 ee) on fd 8 [1:1:1] [main] Setsockopt(1 5 80d3000 e3) on fd 12 [1:2:1] [main] Setsockopt(1 6 80d3000 29) on fd 13 [1:2:1] [main] Setsockopt(1 23 80d3000 db) on fd 14 [1:1:1] [main] Setsockopt(1 a 80d3000 4) on fd 18 [1:5:1] [main] Setsockopt(1 2d 80d3000 4) on fd 19 [1:2:1] [main] Setsockopt(1 2b 80d3000 48) on fd 21 [1:2:1] [main] Setsockopt(1 e 80d3000 ec) on fd 22 [1:5:1] [main] Setsockopt(1 21 80d3000 4) on fd 23 [1:2:1] [main] Setsockopt(1 2c 80d3000 4) on fd 25 [1:2:1] [main] Setsockopt(1 2f 80d3000 4) on fd 26 [1:2:1] [main] Setsockopt(1 1 80d3000 e) on fd 28 [16:3:2] [main] Setsockopt(1 22 80d3000 9e) on fd 29 [1:1:1] [main] Setsockopt(10e 5 80d3000 34) on fd 30 [16:3:15] [main] Setsockopt(10e 5 80d3000 e5) on fd 33 [16:2:16] [main] Setsockopt(1 1d 80d3000 4) on fd 36 [1:5:1] [main] Setsockopt(1 21 80d3000 4) on fd 37 [16:3:4] [main] Setsockopt(1 e 80d3000 c4) on fd 39 [1:5:1] [main] Setsockopt(1 c 80d3000 52) on fd 41 [1:5:1] [main] Setsockopt(1 24 80d3000 c1) on fd 42 [1:2:1] [main] Setsockopt(10e 5 80d3000 4) on fd 43 [16:2:15] [main] Setsockopt(1 e 80d3000 cb) on fd 45 [1:1:1] [main] Setsockopt(1 20 80d3000 4) on fd 47 [1:1:1] [main] Setsockopt(1 24 80d3000 f9) on fd 48 [1:2:1] [main] Setsockopt(1 6 80d3000 4) on fd 49 [16:2:15] [main] Setsockopt(10e 3 80d3000 4) on fd 51 [16:2:4] [main] Setsockopt(1 21 80d3000 4) on fd 53 [1:2:1] [main] Setsockopt(1 6 80d3000 4) on fd 54 [1:5:1] [main] Setsockopt(1 29 80d3000 f1) on fd 55 [1:2:1] [main] Setsockopt(1 2 80d3000 4) on fd 57 [1:2:1] [main] Setsockopt(1 e 80d3000 26) on fd 59 [1:1:1] [main] Setsockopt(1 a 80d3000 7d) on fd 61 [1:2:1] [main] Setsockopt(1 1 80d3000 4) on fd 63 [16:2:0] [main] Setsockopt(1 1 80d3000 4) on fd 64 [1:5:1] [main] Setsockopt(1 2 80d3000 4) on fd 65 [16:2:2] [main] Setsockopt(1 2d 80d3000 4) on fd 67 [1:2:1] [main] Setsockopt(1 22 80d3000 5c) on fd 69 [1:1:1] [main] Setsockopt(10e 5 80d3000 95) on fd 70 [16:2:4] [main] Setsockopt(1 6 80d3000 25) on fd 74 [1:5:1] [main] Setsockopt(1 2a 80d3000 4b) on fd 75 [1:5:1] [main] Setsockopt(1 7 80d3000 92) on fd 76 [1:2:1] [main] Setsockopt(1 b 80d3000 4) on fd 77 [1:5:1] [main] Setsockopt(1 2e 80d3000 4) on fd 78 [1:2:1] [main] Setsockopt(1 9 80d3000 4) on fd 79 [16:2:16] [main] Setsockopt(10e 5 80d3000 4) on fd 81 [16:3:0] [main] Setsockopt(1 d 80d3000 8) on fd 82 [1:2:1] [main] Setsockopt(10e 4 80d3000 f2) on fd 83 [16:3:2] [main] Setsockopt(1 22 80d3000 4) on fd 85 [1:5:1] [main] Setsockopt(1 c 80d3000 4) on fd 86 [1:5:1] [main] Setsockopt(1 28 80d3000 4) on fd 87 [1:5:1] [main] Setsockopt(1 21 80d3000 90) on fd 90 [1:1:1] [main] Setsockopt(1 2f 80d3000 4) on fd 92 [16:3:2] [main] Setsockopt(1 21 80d3000 4) on fd 93 [1:5:1] [main] Setsockopt(1 2 80d3000 4) on fd 96 [1:1:1] [main] Setsockopt(1 28 80d3000 4) on fd 99 [1:1:1] [main] Setsockopt(1 e 80d3000 4) on fd 105 [1:1:1] [main] Setsockopt(10e 1 80d3000 39) on fd 106 [16:2:2] [main] Setsockopt(1 35 80d3000 4) on fd 107 [1:1:1] [main] Setsockopt(1 2d 80d3000 4) on fd 112 [1:2:1] [main] Setsockopt(1 d 80d3000 8) on fd 113 [1:5:1] [main] Setsockopt(1 1d 80d3000 5c) on fd 115 [1:2:1] [main] Setsockopt(10e 5 80d3000 8c) on fd 116 [16:3:4] [main] Setsockopt(10e 2 80d3000 4) on fd 118 [16:3:2] [main] Setsockopt(1 2c 80d3000 d6) on fd 119 [1:5:1] [main] Setsockopt(1 2d 80d3000 48) on fd 123 [1:5:1] [main] Setsockopt(1 9 80d3000 f1) on fd 124 [16:3:2] [main] Setsockopt(1 21 80d3000 c0) on fd 127 [16:2:0] [main] Setsockopt(1 1 80d3000 4) on fd 129 [1:1:1] [main] Setsockopt(1 2d 80d3000 4) on fd 132 [1:2:1] [main] Setsockopt(1 e 80d3000 7f) on fd 133 [1:2:1] [main] Setsockopt(1 2f 80d3000 4) on fd 134 [1:5:1] [main] Setsockopt(1 2c 80d3000 4) on fd 135 [1:5:1] [main] Setsockopt(1 5 80d3000 4) on fd 136 [1:1:1] [main] Setsockopt(1 15 80d3000 8) on fd 138 [1:5:1] [main] Setsockopt(1 2c 80d3000 4) on fd 139 [16:2:15] [main] Setsockopt(1 2f 80d3000 4) on fd 140 [1:2:1] [main] Setsockopt(1 a 80d3000 4) on fd 141 [1:2:1] [main] Setsockopt(1 b 80d3000 1e) on fd 142 [1:2:1] [main] Setsockopt(1 d 80d3000 8) on fd 143 [1:5:1] [main] Setsockopt(1 29 80d3000 4) on fd 144 [16:3:2] [main] Setsockopt(1 25 80d3000 7a) on fd 145 [1:5:1] [main] Setsockopt(1 14 80d3000 8) on fd 147 [1:1:1] [main] Setsockopt(1 2e 80d3000 45) on fd 149 [1:5:1] [main] Setsockopt(1 e 80d3000 d) on fd 150 [1:2:1] [main] Setsockopt(10e 5 80d3000 8) on fd 151 [16:2:2] [main] Setsockopt(1 24 80d3000 4) on fd 153 [1:5:1] [main] Setsockopt(1 a 80d3000 1c) on fd 154 [16:2:16] [main] Setsockopt(1 1d 80d3000 80) on fd 155 [1:1:1] [main] Setsockopt(1 20 80d3000 4) on fd 156 [1:5:1] [main] Setsockopt(1 8 80d3000 4) on fd 157 [1:1:1] [main] Setsockopt(1 22 80d3000 ec) on fd 158 [1:5:1] [main] Setsockopt(1 1 80d3000 4) on fd 159 [1:5:1] [main] Setsockopt(1 21 80d3000 15) on fd 160 [1:5:1] [main] Setsockopt(1 10 80d3000 4) on fd 161 [16:2:15] [main] Setsockopt(1 23 80d3000 4) on fd 165 [1:5:1] [main] Setsockopt(1 10 80d3000 8c) on fd 171 [1:5:1] [main] Setsockopt(1 2d 80d3000 55) on fd 174 [1:1:1] [main] Setsockopt(1 20 80d3000 3a) on fd 176 [1:1:1] [main] Setsockopt(1 2d 80d3000 4) on fd 178 [16:2:0] [main] Setsockopt(1 2 80d3000 1d) on fd 181 [1:5:1] [main] Setsockopt(1 1 80d3000 4) on fd 184 [1:5:1] [main] Setsockopt(1 a 80d3000 b0) on fd 185 [16:2:4] [main] Setsockopt(1 22 80d3000 5b) on fd 186 [1:2:1] [main] Setsockopt(10e 3 80d3000 4) on fd 187 [16:2:4] [main] Setsockopt(1 29 80d3000 5f) on fd 189 [1:1:1] [main] Setsockopt(10e 4 80d3000 b0) on fd 190 [16:2:15] [main] Setsockopt(1 23 80d3000 af) on fd 191 [1:2:1] [main] Setsockopt(1 b 80d3000 54) on fd 192 [1:1:1] [main] Setsockopt(1 28 80d3000 3b) on fd 193 [16:3:0] [main] Setsockopt(1 1 80d3000 7e) on fd 194 [1:5:1] [main] Setsockopt(1 2d 80d3000 6c) on fd 195 [1:2:1] [main] Setsockopt(1 29 80d3000 4) on fd 196 [1:2:1] [main] Setsockopt(1 2f 80d3000 4) on fd 197 [1:2:1] [main] Setsockopt(1 21 80d3000 bf) on fd 200 [16:2:4] [main] Setsockopt(1 b 80d3000 2c) on fd 201 [1:5:1] [main] Setsockopt(1 b 80d3000 6a) on fd 202 [1:1:1] [main] Setsockopt(10e 5 80d3000 4) on fd 204 [16:3:4] [main] Setsockopt(1 f 80d3000 4) on fd 207 [1:1:1] [main] Setsockopt(1 f 80d3000 75) on fd 209 [1:5:1] [main] Setsockopt(10e 4 80d3000 4) on fd 212 [16:2:16] [main] Setsockopt(1 23 80d3000 28) on fd 213 [1:2:1] [main] Setsockopt(1 12 80d3000 4) on fd 214 [16:3:4] [main] Setsockopt(1 22 80d3000 4) on fd 215 [1:5:1] [main] Setsockopt(10e 5 80d3000 4) on fd 217 [16:3:16] [main] Setsockopt(1 10 80d3000 5b) on fd 218 [1:1:1] [main] Setsockopt(1 29 80d3000 4) on fd 221 [1:5:1] [main] Setsockopt(1 25 80d3000 2d) on fd 223 [1:5:1] [main] Setsockopt(1 2f 80d3000 3b) on fd 224 [1:2:1] [main] Setsockopt(1 22 80d3000 4) on fd 225 [1:2:1] [main] Setsockopt(10e 3 80d3000 4) on fd 226 [16:3:16] [main] Setsockopt(1 12 80d3000 7a) on fd 227 [1:5:1] [main] Setsockopt(1 23 80d3000 13) on fd 228 [16:3:4] [main] Setsockopt(10e 4 80d3000 4) on fd 230 [16:2:15] [main] Setsockopt(1 e 80d3000 4) on fd 231 [1:1:1] [main] Setsockopt(1 8 80d3000 5) on fd 232 [1:5:1] [main] Setsockopt(1 d 80d3000 8) on fd 235 [1:2:1] [main] Setsockopt(1 d 80d3000 8) on fd 236 [1:2:1] [main] Setsockopt(1 7 80d3000 34) on fd 237 [16:3:0] [main] Setsockopt(1 5 80d3000 4) on fd 238 [1:2:1] [main] Setsockopt(1 e 80d3000 4) on fd 240 [1:1:1] [main] Setsockopt(1 1 80d3000 4) on fd 242 [1:5:1] [main] Setsockopt(1 f 80d3000 ef) on fd 245 [1:5:1] [main] Setsockopt(1 25 80d3000 75) on fd 248 [16:3:0] [main] Setsockopt(1 22 80d3000 4) on fd 249 [1:5:1] [main] Setsockopt(1 2e 80d3000 a0) on fd 250 [1:1:1] [main] Setsockopt(1 2c 80d3000 4) on fd 251 [1:2:1] [main] Setsockopt(1 2c 80d3000 14) on fd 252 [1:1:1] [main] Setsockopt(1 2b 80d3000 4) on fd 253 [1:1:1] [main] Setsockopt(1 b 80d3000 4) on fd 256 [16:3:4] [main] Setsockopt(1 9 80d3000 4) on fd 258 [1:1:1] [main] Setsockopt(1 2b 80d3000 38) on fd 259 [1:2:1] [main] Setsockopt(1 29 80d3000 4) on fd 262 [1:2:1] [main] Setsockopt(1 2d 80d3000 4) on fd 263 [1:2:1] [main] Setsockopt(1 23 [main] Setsockopt(1 7 80d3000 7b) on fd 266 [1:5:1] [main] Setsockopt(1 20 80d3000 4) on fd 267 [16:2:4] [main] Setsockopt(1 29 80d3000 4) on fd 268 [1:2:1] [main] Setsockopt(1 c 80d3000 4) on fd 269 [1:2:1] [main] Setsockopt(1 24 80d3000 17) on fd 270 [16:2:16] [main] Setsockopt(1 8 80d3000 4) on fd 272 [16:2:4] [main] Setsockopt(1 5 80d3000 40) on fd 273 [1:1:1] [main] Setsockopt(1 10 80d3000 4) on fd 274 [1:1:1] [main] Setsockopt(1 2b 80d3000 c4) on fd 275 [1:1:1] [main] Setsockopt(1 e 80d3000 b) on fd 276 [1:2:1] [main] Setsockopt(1 2e 80d3000 4) on fd 277 [1:2:1] [main] Setsockopt(1 2b 80d3000 4) on fd 280 [1:5:1] [main] Setsockopt(1 b 80d3000 4) on fd 281 [1:5:1] [main] Setsockopt(1 10 80d3000 4) on fd 282 [1:1:1] [main] Setsockopt(1 a 80d3000 e1) on fd 288 [1:1:1] [main] Setsockopt(1 25 80d3000 e) on fd 290 [1:1:1] [main] Setsockopt(1 24 80d3000 4) on fd 294 [1:2:1] [main] Setsockopt(1 23 80d3000 7d) on fd 297 [1:5:1] [main] Setsockopt(1 5 80d3000 4) on fd 298 [1:5:1] [main] Setsockopt(1 20 80d3000 b) on fd 299 [16:3:4] [main] Setsockopt(1 22 80d3000 12) on fd 302 [1:2:1] [main] Setsockopt(1 2 80d3000 4) on fd 303 [1:5:1] [main] Setsockopt(1 28 80d3000 7) on fd 304 [1:2:1] [main] Setsockopt(1 f 80d3000 5e) on fd 305 [1:1:1] [main] Setsockopt(1 a 80d3000 15) on fd 307 [1:2:1] [main] Setsockopt(1 22 80d3000 63) on fd 308 [1:2:1] [main] Setsockopt(1 8 80d3000 4) on fd 309 [1:1:1] [main] Setsockopt(1 24 80d3000 8d) on fd 310 [1:1:1] [main] Setsockopt(1 12 80d3000 fa) on fd 313 [1:1:1] [main] Setsockopt(1 9 80d3000 22) on fd 316 [1:1:1] [main] Setsockopt(1 8 80d3000 4) on fd 318 [1:2:1] [main] Setsockopt(1 22 80d3000 4) on fd 319 [1:1:1] [main] Setsockopt(1 2a 80d3000 4) on fd 320 [1:1:1] [main] Setsockopt(1 1d 80d3000 15) on fd 322 [1:1:1] [main] Setsockopt(10e 4 80d3000 4) on fd 323 [16:2:16] [main] Setsockopt(1 a 80d3000 65) on fd 324 [1:2:1] [main] Setsockopt(1 5 80d3000 4) on fd 325 [1:1:1] [main] Setsockopt(1 e 80d3000 4) on fd 328 [1:2:1] [main] Setsockopt(10e 3 80d3000 7a) on fd 329 [16:2:2] [main] Setsockopt(10e 3 80d3000 4) on fd 331 [16:3:0] [main] Setsockopt(1 24 80d3000 4) on fd 333 [1:1:1] [main] Setsockopt(1 25 80d3000 4) on fd 335 [1:2:1] [main] Setsockopt(1 10 80d3000 32) on fd 338 [16:3:15] [main] Setsockopt(1 1 80d3000 4d) on fd 339 [1:2:1] [main] Setsockopt(1 2c 80d3000 4) on fd 343 [1:5:1] [main] Setsockopt(1 10 80d3000 4) on fd 344 [1:5:1] [main] Setsockopt(1 2d 80d3000 6d) on fd 345 [1:5:1] [main] Setsockopt(1 2d 80d3000 b2) on fd 346 [1:2:1] [main] Setsockopt(1 8 80d3000 4) on fd 349 [1:1:1] [main] Setsockopt(1 25 80d3000 4) on fd 350 [1:2:1] [main] Setsockopt(1 22 80d3000 4) on fd 351 [1:2:1] [main] Setsockopt(1 1d 80d3000 53) on fd 352 [1:1:1] [main] Setsockopt(1 28 80d3000 f2) on fd 353 [1:2:1] [main] Setsockopt(1 29 80d3000 a9) on fd 354 [1:1:1] [main] Setsockopt(1 7 80d3000 d0) on fd 356 [1:2:1] [main] Setsockopt(1 25 80d3000 4) on fd 357 [16:3:15] [main] Setsockopt(1 2f 80d3000 4) on fd 358 [1:5:1] [main] Setsockopt(1 c 80d3000 3b) on fd 359 [1:5:1] [main] Setsockopt(1 22 80d3000 4) on fd 362 [1:2:1] [main] Setsockopt(1 2b 80d3000 4) on fd 363 [1:1:1] [main] Setsockopt(1 2 80d3000 4) on fd 366 [1:2:1] [main] Setsockopt(10e 3 80d3000 4) on fd 367 [16:2:2] [main] Setsockopt(1 23 80d3000 c9) on fd 369 [16:3:15] [main] Setsockopt(1 1 80d3000 4) on fd 370 [1:1:1] [main] Setsockopt(1 b 80d3000 cf) on fd 371 [1:2:1] [main] Setsockopt(1 6 80d3000 4) on fd 372 [1:1:1] [main] Setsockopt(1 2c 80d3000 4) on fd 373 [1:5:1] [main] Setsockopt(1 28 80d3000 4) on fd 374 [1:1:1] [main] Setsockopt(1 d 80d3000 8) on fd 375 [1:2:1] [main] Setsockopt(1 7 80d3000 8a) on fd 378 [16:2:2] [main] Setsockopt(1 22 80d3000 c7) on fd 379 [1:1:1] [main] 375 sockets created based on info from socket cachefile. [main] Generating file descriptors [main] Added 297 filenames from /dev [main] Added 6619 filenames from /proc [main] Added 16113 filenames from /sys [child0:478] swapoff (115) returned ENOSYS, marking as inactive. [child1:479] bdflush (134) returned ENOSYS, marking as inactive. [child0:478] mq_notify (281) returned ENOSYS, marking as inactive. [child0:478] geteuid16 (49) returned ENOSYS, marking as inactive. [child0:478] uid changed! Was: 0, now 32768 [watchdog] [476] Watchdog exiting [child1:479] child exiting. Bailing main loop. Exit reason: UID changed. [init] Ran 17 syscalls. Successes: 5 Failures: 11 [ 424.818406] Writes: Total: 4 Max/Min: 0/0 Fail: 0 [ 427.807478] init: tty4 main process (471) terminated with status 1 [ 427.809246] init: tty4 main process ended, respawning [ 427.838602] init: tty5 main process (472) terminated with status 1 [ 427.840640] init: tty5 main process ended, respawning [ 427.875850] init: tty2 main process (473) terminated with status 1 [ 427.877751] init: tty2 main process ended, respawning [ 427.915557] init: tty3 main process (474) terminated with status 1 [ 427.917387] init: tty3 main process ended, respawning [ 427.957862] init: tty6 main process (475) terminated with status 1 [ 427.960920] init: tty6 main process ended, respawning [ 437.899370] init: tty4 main process (480) terminated with status 1 [ 437.900054] init: tty4 main process ended, respawning [ 437.919319] init: tty5 main process (481) terminated with status 1 [ 437.919994] init: tty5 main process ended, respawning [ 437.927161] init: tty2 main process (482) terminated with status 1 [ 437.927803] init: tty2 main process ended, respawning [ 437.959256] init: tty3 main process (483) terminated with status 1 [ 437.959894] init: tty3 main process ended, respawning [ 437.992671] init: tty6 main process (484) terminated with status 1 [ 437.993324] init: tty6 main process ended, respawning [ 447.916407] init: tty4 main process (485) terminated with status 1 [ 447.918902] init: tty4 main process ended, respawning [ 447.934914] init: tty5 main process (486) terminated with status 1 [ 447.936335] init: tty5 main process ended, respawning [ 447.947794] init: tty2 main process (487) terminated with status 1 [ 447.953618] init: tty2 main process ended, respawning [ 447.987719] init: tty3 main process (488) terminated with status 1 [ 447.992818] init: tty3 main process ended, respawning [ 448.008406] init: tty6 main process (489) terminated with status 1 [ 448.011474] init: tty6 main process ended, respawning [ 457.949728] init: tty4 main process (490) terminated with status 1 [ 457.950441] init: tty4 main process ended, respawning [ 458.003354] init: tty5 main process (491) terminated with status 1 [ 458.004039] init: tty5 main process ended, respawning [ 458.013183] init: tty2 main process (492) terminated with status 1 [ 458.013915] init: tty2 main process ended, respawning [ 458.033222] init: tty3 main process (493) terminated with status 1 [ 458.033896] init: tty3 main process ended, respawning [ 458.040273] init: tty6 main process (494) terminated with status 1 [ 458.040974] init: tty6 main process ended, respawning [ 464.290704] init: Failed to create pty - disabling logging for job [ 464.292203] init: Temporary process spawn error: No such file or directory error: 'rc.local' exited outside the expected code flow. [ 464.458056] init: rc main process (410) killed by TERM signal [ 464.468154] init: tty4 main process (495) killed by TERM signal [ 464.478853] init: tty5 main process (496) killed by TERM signal [ 464.490123] init: tty2 main process (497) killed by TERM signal [ 464.499510] init: tty3 main process (498) killed by TERM signal [ 464.509941] init: tty6 main process (499) killed by TERM signal [ 464.532086] init: hwclock-save main process (502) terminated with status 70 [ 464.548258] init: plymouth-upstart-bridge main process (503) terminated with status 1 umount: /run/lock: not mounted * Will now restart [ 466.674540] Unregister pv shared memory for cpu 0 [ 466.675674] Unregister pv shared memory for cpu 1 [ 466.676442] spin_lock-torture: Unscheduled system shutdown detected [ 466.705583] reboot: Restarting system [ 466.706472] reboot: machine restart [ 466.709358] torture thread torture_shuffle parking due to system shutdown [ 466.719166] torture thread torture_stutter parking due to system shutdown Elapsed time: 470 kvm=( qemu-system-x86_64 -enable-kvm -cpu kvm64 -kernel /pkg/linux/i386-randconfig-i0-201739/gcc-4.8/4b88a5c3f27e19bd236b3910299633a45cc25e34/vmlinuz-4.13.0-rc4-00171-g4b88a5c -initrd /osimage/quantal/quantal-core-i386.cgz -m 369 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -watchdog-action debug -rtc base=localtime -drive file=/fs/sda2/disk0-quantal-intel12-14,media=disk,if=virtio -drive file=/fs/sda2/disk1-quantal-intel12-14,media=disk,if=virtio -drive file=/fs/sda2/disk2-quantal-intel12-14,media=disk,if=virtio -drive file=/fs/sda2/disk3-quantal-intel12-14,media=disk,if=virtio -drive file=/fs/sda2/disk4-quantal-intel12-14,media=disk,if=virtio -drive file=/fs/sda2/disk5-quantal-intel12-14,media=disk,if=virtio -drive file=/fs/sda2/disk6-quantal-intel12-14,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-quantal-intel12-14 -serial file:/dev/shm/kboot/quantal-intel12-14/serial -serial file:/dev/shm/kboot/quantal-intel12-14/kmsg -daemonize -display none -monitor null ) append=( root=/dev/ram0 hung_task_panic=1 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-i0-201739/wfg:unwinder-josh:4b88a5c3f27e19bd236b3910299633a45cc25e34/.vmlinuz-4b88a5c3f27e19bd236b3910299633a45cc25e34-20171009195935-289:quantal-intel12-14 branch=wfg/unwinder-josh BOOT_IMAGE=/pkg/linux/i386-randconfig-i0-201739/gcc-4.8/4b88a5c3f27e19bd236b3910299633a45cc25e34/vmlinuz-4.13.0-rc4-00171-g4b88a5c drbd.minor_count=8 ) "${kvm[@]}" -append "${append[*]}"