All of lore.kernel.org
 help / color / mirror / Atom feed
From: Carlo Caione <carlo@caione.org>
To: linux@endlessm.com, bardliao@realtek.com, oder_chiou@realtek.com,
	pierre-louis.bossart@linux.intel.com, broonie@kernel.org,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	tiwai@suse.com, albertchen@realtek.com, edgar_shen@realtek.com
Cc: Carlo Caione <carlo@endlessm.com>
Subject: [PATCH v2 2/5] ASoC: intel: byt: Add headset jack
Date: Fri, 20 Oct 2017 12:18:56 +0100	[thread overview]
Message-ID: <20171020111859.2448-3-carlo@caione.org> (raw)
In-Reply-To: <20171020111859.2448-1-carlo@caione.org>

From: Carlo Caione <carlo@endlessm.com>

Introduce an headset jack in the machine driver and register it to the
codec driver.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 1dad5c98c9ef..5aca55baccda 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -47,6 +47,7 @@ enum {
 
 struct byt_rt5651_private {
 	struct clk *mclk;
+	struct snd_soc_jack jack;
 };
 
 static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC_MAP |
@@ -177,6 +178,17 @@ static const struct snd_kcontrol_new byt_rt5651_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Speaker"),
 };
 
+static struct snd_soc_jack_pin bytcr_jack_pins[] = {
+	{
+		.pin	= "Headphone",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Headset Mic",
+		.mask	= SND_JACK_MICROPHONE,
+	},
+};
+
 static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream,
 					struct snd_pcm_hw_params *params)
 {
@@ -244,6 +256,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
 static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
 {
 	struct snd_soc_card *card = runtime->card;
+	struct snd_soc_codec *codec = runtime->codec;
 	struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card);
 	const struct snd_soc_dapm_route *custom_map;
 	int num_routes;
@@ -301,6 +314,16 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
 			dev_err(card->dev, "unable to set MCLK rate\n");
 	}
 
+	ret = snd_soc_card_jack_new(runtime->card, "Headset",
+				    SND_JACK_HEADSET, &priv->jack,
+				    bytcr_jack_pins, ARRAY_SIZE(bytcr_jack_pins));
+	if (ret) {
+		dev_err(runtime->dev, "Headset jack creation failed %d\n", ret);
+		return ret;
+	}
+
+	rt5651_set_jack_detect(codec, &priv->jack);
+
 	return ret;
 }
 
-- 
2.14.2

  parent reply	other threads:[~2017-10-20 11:19 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-20 11:18 [PATCH v2 0/5] rt5651: Enable jack detection Carlo Caione
2017-10-20 11:18 ` [PATCH v2 1/5] ASoC: rt5651: Enable jack detection on JD* pins Carlo Caione
2017-10-26 14:17   ` Applied "ASoC: rt5651: Enable jack detection on JD* pins" to the asoc tree Mark Brown
2017-10-26 14:17     ` Mark Brown
2017-10-26 14:17   ` Mark Brown
2017-10-26 14:17     ` Mark Brown
2017-10-20 11:18 ` Carlo Caione [this message]
2017-10-26 14:16   ` Applied "ASoC: intel: byt: Add headset jack" " Mark Brown
2017-10-26 14:16     ` Mark Brown
2017-10-20 11:18 ` [PATCH v2 3/5] ASoC: intel: byt: Enable IN2 map quirk for a KIANO laptop Carlo Caione
2017-10-26 14:16   ` Applied "ASoC: intel: byt: Enable IN2 map quirk for a KIANO laptop" to the asoc tree Mark Brown
2017-10-26 14:16     ` Mark Brown
2017-10-20 11:18 ` [PATCH v2 4/5] ASoC: rt5651: Rework quirk logic Carlo Caione
2017-10-26 14:16   ` Applied "ASoC: rt5651: Rework quirk logic" to the asoc tree Mark Brown
2017-10-26 14:16     ` Mark Brown
2017-10-20 11:18 ` [PATCH v2 5/5] ASoC: rt5651: Enable JD1_1 quirk for KIANO laptopt Carlo Caione
2017-10-26 14:16   ` Applied "ASoC: rt5651: Enable JD1_1 quirk for KIANO laptopt" to the asoc tree Mark Brown
2017-10-26 14:16     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171020111859.2448-3-carlo@caione.org \
    --to=carlo@caione.org \
    --cc=albertchen@realtek.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bardliao@realtek.com \
    --cc=broonie@kernel.org \
    --cc=carlo@endlessm.com \
    --cc=edgar_shen@realtek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@endlessm.com \
    --cc=oder_chiou@realtek.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.