All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Faiz Abbas <faiz_abbas@ti.com>
Cc: kishon@ti.com, bhelgaas@google.com, linux-omap@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] dwc: dra7xx: Print link state to console for debug
Date: Fri, 20 Oct 2017 18:09:52 -0500	[thread overview]
Message-ID: <20171020230952.GZ6332@bhelgaas-glaptop.roam.corp.google.com> (raw)
In-Reply-To: <1508417009-30869-1-git-send-email-faiz_abbas@ti.com>

On Thu, Oct 19, 2017 at 06:13:29PM +0530, Faiz Abbas wrote:
> Enable support for printing the LTSSM link state for debugging PCI
> when link is down.
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
> v2:
>  1. Changed dev_err() to dev_dbg()
>  2. Changed static char array to static const char * const
>  3. format changes

I'm not really sure how much debug help we want to carry around in the
mainline kernel.  End users aren't going to use this; it seems like
more of a lab tool, and in situations like that you usually end up
carrying around some out-of-tree patches for a while anyway.  But I
can probably be convinced either way.

>  drivers/pci/dwc/pci-dra7xx.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> index 34427a6..0e70e77 100644
> --- a/drivers/pci/dwc/pci-dra7xx.c
> +++ b/drivers/pci/dwc/pci-dra7xx.c
> @@ -98,6 +98,45 @@ struct dra7xx_pcie_of_data {
>  
>  #define to_dra7xx_pcie(x)	dev_get_drvdata((x)->dev)
>  
> +static const char * const state[] = {
> +	"DETECT_QUIET",
> +	"DETECT_ACT",
> +	"POLL_ACTIVE",
> +	"POLL_COMPLIANCE",
> +	"POLL_CONFIG",
> +	"PRE_DETECT_QUIET",
> +	"DETECT_WAIT",
> +	"CFG_LINKWD_START",
> +	"CFG_LINKWD_ACEPT",
> +	"CFG_LANENUM_WAIT",
> +	"CFG_LANENUM_ACEPT",
> +	"CFG_COMPLETE",
> +	"CFG_IDLE",
> +	"RCVRY_LOCK",
> +	"RCVRY_SPEED",
> +	"RCVRY_RCVRCFG",
> +	"RCVRY_IDLE",
> +	"L0",
> +	"L0S",
> +	"L123_SEND_EIDLE",
> +	"L1_IDLE",
> +	"L2_IDLE",
> +	"L2_WAKE",
> +	"DISABLED_ENTRY",
> +	"DISABLED_IDLE",
> +	"DISABLED",
> +	"LPBK_ENTRY",
> +	"LPBK_ACTIVE",
> +	"LPBK_EXIT",
> +	"LPBK_EXIT_TIMEOUT",
> +	"HOT_RESET_ENTRY",
> +	"HOT_RESET",
> +	"RCVRY_EQ0",
> +	"RCVRY_EQ1",
> +	"RCVRY_EQ2",
> +	"RCVRY_EQ3"
> +};
> +
>  static inline u32 dra7xx_pcie_readl(struct dra7xx_pcie *pcie, u32 offset)
>  {
>  	return readl(pcie->base + offset);
> @@ -118,6 +157,15 @@ static int dra7xx_pcie_link_up(struct dw_pcie *pci)
>  {
>  	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
>  	u32 reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_PHY_CS);
> +	u32 cmd_reg;
> +	u32 ltssm_state;
> +
> +	if (!(reg & LINK_UP)) {
> +		cmd_reg = dra7xx_pcie_readl(dra7xx,
> +					    PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
> +		ltssm_state = (cmd_reg & GENMASK(7, 2)) >> 2;
> +		dev_dbg(pci->dev, "Link state:%s\n", state[ltssm_state]);
> +	}
>  
>  	return !!(reg & LINK_UP);
>  }
> -- 
> 2.7.4
> 

  parent reply	other threads:[~2017-10-20 23:09 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-19 12:43 [PATCH v2] dwc: dra7xx: Print link state to console for debug Faiz Abbas
2017-10-19 12:43 ` Faiz Abbas
2017-10-19 13:08 ` Faiz Abbas
2017-10-19 13:08   ` Faiz Abbas
2017-10-19 13:26   ` David Laight
2017-10-19 13:26     ` David Laight
2017-10-26  7:59     ` Faiz Abbas
2017-10-30  8:48       ` Faiz Abbas
2017-11-06  2:56         ` Faiz Abbas
2017-10-20 23:09 ` Bjorn Helgaas [this message]
2017-10-23 10:29   ` Faiz Abbas
2017-10-23 10:29     ` Faiz Abbas
2017-10-23 14:04     ` Bjorn Helgaas
2017-10-24  6:18       ` Kishon Vijay Abraham I
2017-10-24  6:18         ` Kishon Vijay Abraham I
2017-10-24 19:59 ` Bjorn Helgaas
2017-10-25  8:21   ` Faiz Abbas
2017-10-25  8:21     ` Faiz Abbas
2017-10-25 13:23     ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171020230952.GZ6332@bhelgaas-glaptop.roam.corp.google.com \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=faiz_abbas@ti.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.